Fm modulator causing screen discoloration
I purchased a 20 gig Ipod Photo less than 2 weeks ago. I have tried 2 types of fm modulators in my car, a Belkin that plugs into the headphone jack, and a DLO Transpod docking type.
The problem I have is that when I used either transmitter, it would cause a straight vertical line down the center of my screen. The left side becomes very dark and the right side of the screen changes colors, but stays a bit brighter then the left side.
Once I unplug it from the transmitter, it usually takes less than 10 minutes for the screen to come back to normal.
Any Ideas?? Bad Ipod??
Try doing a SMC reset, it may need to be done 2-3 times.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Similar Messages
-
I observed my iPhone 5 screen discolored this morning for the first time since February this year, for once I thought I was loosing my eyesight. It came back to normal after a while and just this evening it's back making it twice same day. Apple please let me know what cause this and how to solve it.
T2gee wrote:
. Apple please let me know what cause this and how to solve it.
This is a user to User Forum.
Suggest you Visit an Apple Store or AASP (Authorized Apple Service Provider) and have the Device checked...
Be sure to make an appointment first... -
How to use table maintenance view in module pool screen
hi ,
want to use table maintenance view in a module pool screen so that i can edit, insert, delete and update date in to the ztable.please help.You can simply call it via SM30. Or you can call the table maintence view from any program(report or module pool) using a function module.
call function 'VIEW_MAINTENANCE_CALL'
exporting
action = 'U'
view_name = 'Z_Table_Name'
exceptions
client_reference = 1
foreign_lock = 2
invalid_action = 3
no_clientindependent_auth = 4
no_database_function = 5
no_editor_function = 6
no_show_auth = 7
no_tvdir_entry = 8
no_upd_auth = 9
only_show_allowed = 10
system_failure = 11
unknown_field_in_dba_sellist = 12
view_not_found = 13
others = 14.
Regards,
RIch Heilman -
Using 2 memory modules causes kernel panic
In early 2009 I upgraded my memory from 512 to 2 GB, 2 modules of 1GB each. This past January (just shy of 2 years later) I got a kernel panic. I tested running with a single module, and one module caused panic, the other was fine. Both slots function with the good module. So I got two new matched replacement chips from OWC, put them in and got kernel panics during the boot process. Yesterday I spent testing memory configurations and found this:
1. chip 1 alone runs fine and passes all Rember memory tests in slot 1.
2. chip 2 alone runs fine in slot 1 and 2, passes all memory tests in slot 2.
3. chips 1 and 2 together, in either slot, cause kernel panics before the OS is loaded.
Has anyone seen this problem? Will it go away if I use top of the line (Apple) memory chips?
When the kernel panics started back in January, an AppleCare advanced advisor said he had the same problem and he had to remove one module to stop the kernel panics. Running on 1GB doesn't work for me because I tend to max out the memory and programs like Mail, Safari, Photoshop, etc. become unreponsive all together.
thanks -I have spent more time on the phone with OWC about this than I care to remember. Their latest request is that I use an eraser to clean the metal contacts on the chips; if that fails, I get to send the chips back. Whether I get a refund or yet another set of replacement chips, I don't know. They are not experts on Apple machines, that is clear.
-
Icon display in Module pool screen not visible to some users
Hi,
I have added an icon in one of the module pool screen with dynamic quick info. The page is rendered fine and the info is also displayed well for most users except some. I can't figure out why the icon is not being displayed for some users.
Do someone has any solution for this?
Thanks,
SumithAs I recall, the icons are actually stored in a file on each PC so some users may have a corrupted or out-of-date file with the icons. You can look for posting on "how to add an icon" to see a discussion on this topic.
I found some useful info at:
Create and Add Icons to table ICON?
Message was edited by: Charles Folwell -
How to handle The Back button on Module Pool screen
Hi Gurus,
I have created a module pool screen. In that screen I have used some input/output fields(text box) which i have marked mandatory by making the input field as "required" under program tab.
now when running the screen if no data is entered into these mandatory input field then BACK button does not work. First I have to enter some data into the input filed only then the BACK button works. How should i code so that the back button works even without entering the data into these mandatory fields.hi,
use AT EXIT-COMMAND with the module.
eg. module user_command at exit command.
then there will be no problem. -
How to display image and data in module pool screen?
Hi,
I want to display image and relevant data besides the image in module pool screen, I am using docking container to display the image.
Actually I am able to display image or data any one but not both.
one more thing I want to display multiple images and their data.
Please suggest some one if you have any idea.
Regards,
Dileep.You can try below way, I have used in report.
DATA: gc_docking TYPE REF TO cl_gui_docking_container, "#EC NEEDED "Docking Container
gc_split TYPE REF TO cl_gui_easy_splitter_container, "#EC NEEDED "Splitter
gc_top_container TYPE REF TO cl_gui_container, "#EC NEEDED "Top Container
gc_bottom_container TYPE REF TO cl_gui_container, "#EC NEEDED "Bottom Container
gc_document TYPE REF TO cl_dd_document, "#EC NEEDED "Document
gc_events TYPE REF TO lcl_event_class, "#EC NEEDED " Local Event Class
gc_grid TYPE REF TO cl_gui_alv_grid, "#EC NEEDED " ALV Class
" Creating Docking
CREATE OBJECT gc_docking
EXPORTING
ratio = c_95.
IF sy-subrc EQ 0.
* Splitting the Docking container
CREATE OBJECT gc_split
EXPORTING
parent = gc_docking
sash_position = c_10 "Position of Splitter Bar (in Percent)
with_border = c_1. "With Border = 1 Without Border = 0
ENDIF.
* Placing the containers in the splitter
gc_top_container = gc_split->top_left_container .
gc_bottom_container = gc_split->bottom_right_container .
* Creating Grid
CREATE OBJECT gc_grid
EXPORTING
i_parent = gc_bottom_container.
ELSE.
* Background job handling
CREATE OBJECT gc_grid
EXPORTING
i_parent = gc_docking.
ENDIF.
* Creating the document
CREATE OBJECT gc_document
EXPORTING
style = 'ALV_GRID'.
Regards,
Sameer -
How to get the Grand Total in Module pool Screen
Hi Frds.
How to get the Grand Total in Module pool Screen
Example i have 10 different materials
for each matarial has different moving . But in my case matarials is doesnt matter here
10 material Moving Average price to do Frand total and display in one column...
Please Help me out Frds.
Regards,
KabilHi
You need to calculate the total in a module of PAI (or PBO) event:
PROCESS PAI.
LOOP.....
ENDLOOP.
MODULE CALCULATE_TOTAL.
MODULE CALCULATE_TOTAL.
GRAND_TOTAL = 0.
LOOP AT ITAB,
GRAND_TOTAL = GRAND_TOTAL + ITAB-PWB.
ENDLOOP.
ENDMODULE.
In this way the grand total will be calculated as soon as the user presses enter or another command.
You can't insert the calculation in the loop of table control, because this loop runs the visible lines only, so it's better to calculate the total out of those loop, -
Assigning 2 fields of same table in Module pool screen
Hi,
I want to assign similar fields of table in module pool screen.
In one case i directly use the tablename-fieldname and in other case when i try doing the same i get error. I know that this is not possible.
Is there any way to get around this. The field i am referring to is attached to a custom domain which is having defined fields. In the second assignment i need to retreive the values of the domain and display it in dropdown mode so that the users are able to select it.
Regards,
ImranThe domain only attached with this field?check the same domain attached to any other field and insert that field in the screen.
shibu
reward if helpful -
How to do ICON_EXPAND and ICON_COLLAPSE input fields in module pool screen?
hi frnds.
My problem is in module pool screen how to do ICON_EXPAND and ICON_COLLAPSE input fields in module pool screen?And how to do GUI STATUS and GUI TITLE? IN SE80.
ITS URGENT.POINTS WILL BE REWADED.THANKS IN ADVANCE.Hi,
Go through this thread.
[expand and collapse|expand and collapse]
Cheers,
Simha. -
How to retain leading zeros in module pool screen
Hi experts,
I have a ztable field of type NUMC4 being displayed on a module pool screen, the value in the field is '0001', but on the screen it displays value as '1' (without leading zeros), When I save the record, Even in the databse it stores as '1'.
But I have checked in debugging the field always contains '0001' in the program execution and I have also used 'CONVERSION_EXIT_ALPHA_INPUT' in the PBO but no use.
Pls suggest.
Thanks,
DeepakCheck the screen attributes for the field. There is an option to show leading zeroes.
edit.
And how did you see it was stored a 1 and not 0001? Using SE16N? Mind you: with SE16N conversion-exits are executed automatically thus showing 0001 as 1.
To make sure: double click on the record in SE16N and look if it's still 1 and not 0001. -
How to insert tabstrip control in module pool screen painter
Hi all!
plz tell e how to use tabstrip control in module pool screen painter.Also plz give me an example program using tabstrip control.To insert tabstrip just open layout of screen and press on the tabstrip button there .
Use this souce code further to activate it .
CONTROLS tabstrip TYPE TABSTRIP.
DATA: okcode TYPE sy-ucomm,
dynnr TYPE sy-dynnr,
flag type flag,
active like tabstrip-activetab .
call SCREEN 100.
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
data: lv_okcode type syucomm.
lv_okcode = okcode.
clear okcode.
case lv_okcode.
WHEN 'TAB1'.
dynnr = '0110'.
WHEN 'TAB2'.
dynnr = '0120'.
WHEN 'TAB3'.
dynnr = '0130'.
WHEN 'TAB4'.
dynnr = '0140'.
WHEN 'TAB5'.
"check authorization, if authorization fails
flag = 'X'. "set the global flag
active = 'TAB1'. "store active tab in global variable
dynnr = '0110'. "set the screen number
WHEN 'BACK' or 'EXIT'.
leave program.
ENDCASE.
IF lv_okcode(3) = 'TAB'.
tabstrip-activetab = lv_okcode.
ENDIF.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MAIN'.
SET TITLEBAR 'xxx'.
IF tabstrip-activetab IS INITIAL OR
dynnr IS INITIAL.
tabstrip-activetab = 'TAB1'.
dynnr = '0110'.
ENDIF.
"set the activetab explicilty here
if flag eq 'X'. "from authorization failure
tabstrip-activetab = active. "'TAB1'
clear flag.
endif.
ENDMODULE. " STATUS_0100 OUTPUT -
How to add logo in module pool screen
Hi Expert,
I need to display company logo in the module pool screen
how this can be added ?
Regards
BikasHi,
create a custom control called 'CUSTOM_CONTROL'
CONSTANTS: CNTL_TRUE TYPE I VALUE 1,
CNTL_FALSE type i value 0.
data:h_picture type ref to cl_gui_picture,
h_pic_container type ref to cl_gui_custom_container.
data: graphic_url(255),
graphic_refresh(1),
g_result like cntl_true.
data: begin of graphic_table occurs 0,
line(255) type x,
end of graphic_table.
data: graphic_size type i.
data: g_stxbmaps type STXBITMAPS,
l_bytecnt type i,
l_content TYPE standard table of bapiconten initial size 0.
g_stxbmaps-tdobject = 'GRAPHICS'.
g_stxbmaps-tdname = 'ENJOY'.
g_stxbmaps-tdid = 'BMAP'.
g_stxbmaps-tdbtype = 'BMON'.
call function 'SAPSCRIPT_GET_GRAPHIC_BDS'
exporting
i_object = g_stxbmaps-tdobject
i_name = g_stxbmaps-tdname
i_id = g_stxbmaps-tdid
i_btype = g_stxbmaps-tdbtype
importing
e_bytecount = l_bytecnt
tables
content = l_content
exceptions
not_found = 1
bds_get_failed = 2
bds_no_content = 3
others = 4.
call function 'SAPSCRIPT_CONVERT_BITMAP'
exporting
old_format = 'BDS'
new_format = 'BMP'
bitmap_file_bytecount_in = l_bytecnt
importing
bitmap_file_bytecount = graphic_size
tables
bds_bitmap_file = l_content
bitmap_file = graphic_table
exceptions
others = 1.
call function 'DP_CREATE_URL'
exporting
type = 'image'
subtype = cndp_sap_tab_unknown
size = graphic_size
lifetime = cndp_lifetime_transaction
tables
data = graphic_table
changing
url = graphic_url
exceptions
others = 4 .
create object h_pic_container
exporting container_name = 'CUSTOM_CONTROL'.
create object h_picture exporting parent = h_pic_container.
call method h_picture->set_display_mode
exporting
display_mode = cl_gui_picture=>display_mode_normal.
call method h_picture->load_picture_from_url
exporting url = graphic_url
importing result = g_result.
or you can check the program RSDEMO_CUSTOM_CONTROL
check link :
How to insert Image on Screen
thanks
Parvathi -
How to give ** bydefault in password in module pool screen .
Hi experts
how to give ******* by default in password in module pool screen .
ThanksHi ,
Double click on the field u will get a pop up window
i.e. attribute window for that field.
in that window you have a tab called Program at the bottom.
in program tab you have many checkboxes.
check the check box with name *Entry.
and activate.
what ever you enter now will be in password formate
Regards
Ajay -
Time Machine causes screen to go blank when starting backup
Time machine causes screen to go blank when it starts backup. I have cable wireless modem with ethernet to time machine; then ethernet to computer. Cable company just increased speed to 30. What may be happening? I am afraid of losing all my data. Screen recovers within one second, but it goes completely blank when time machine starts backup
Time machine causes screen to go blank when it starts backup. I have cable wireless modem with ethernet to time machine; then ethernet to computer. Cable company just increased speed to 30. What may be happening? I am afraid of losing all my data. Screen recovers within one second, but it goes completely blank when time machine starts backup
Maybe you are looking for
-
On RHEL 5.7, Oracle 11.2.0.3 Client installation error
Hello Friends, I am getting below error while installing Oracle 11gR2 client on a RHEL5.7 Machine. After I finished the installation by silent mode whenever I am launching the sqlplus /nolog command sqlplus: error while loading shared libraries: libc
-
Can you save editable pdf as read only
I have a client who's using an editable pdf that I set up in the full version of Acrobat 8.0. They would like to edit the doc in Acrobat Reader and then do a save as and make the doc "read Only" so that their viewers can't edit the document after the
-
Hi there, unfortunately I have to come back again to solve the same problem as one week ago, but this time with a new project. Here it's the problem of the last weekend: https://discussions.apple.com/message/22096295#22096295 The process described th
-
Enterprise services for ERP Shipment
Hi, We are working on a scenario to send shipment details to SAP PI system via standard Enterprise services whenever the shipment is created in ERP. Could you please help us on the below queries? 1) Is there any standard enterprise services available
-
Purchasing Group in equipment BOM ( Item level)
At the time of creating equipment BOM , purchasing group in equipment BOM (item level ) will be in sync with material master purchasing data. When we change purchasing data (Purchasing group) in material master at that time system will not change pur