FM - No superior budget object is defined for 1000000000 / 101110

Hi,
I am setting up Budget Structure and encountered error message - Message no. BP300 - "No superior budget object is defined for 1000000000 / 101110".
The environment is Former Budgeting with Year-Dependent Commitment Items and Funds Centers. Funds Center is 1000000000 and Commitment Item is 101110. Even with both these Funds Center and Commitment Item maintained with superior funds center and superior commitment item, this error is still there. What else must be done?
Regards,
B Lim

query resolved

Similar Messages

  • Error Message: BP300 No superior budget object is defined for 110/1000001

    Hi,
    I am setting up Budget Structure and encountered error message - Message no. BP300 - "No superior budget object is defined for 1010 / 1000001".
    The environment is Former Budgeting with Year-Dependent Commitment Items and Funds Centers.
    Please help us to resolve this issue
    Regards
    K.Gunasekar

    Hi K.Gunasekar,
    Please check the following note that will help to fix this error:
    106899 Guideline: Structural change of master data in FM.
    This note usually guides to resolve the error BP300.
    Best Regards,
    Vanessa.

  • FRM-41344 - OLE object not defined  for CONTROL_OLE  in the current record

    Hi!
    I am working in a multirecord block, and I need to obtain data from a Weighing System on each record. But this error appears in run time: FRM-41344 - OLE object not defined for CONTROL_OLE in the current record.
    I use the same in other program, but in that case is a single record block.
    Can somebody help me?

    Hi;
    For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Application Development in PL/SQL » Forms which is dedicated forum site
    Regard
    Helios

  • Core Data Services in ABAP : No URI-Mapping defined for object type DDLS

    Hi ,
    When creating a DDL source , I get the error
    " No URI-Mapping defined for object type DDLS and object name ZCDSV_01_06".
    Can you please suggest what the issue could be?
    Thanks,
    Chakram Govindarajan

    Now I am able to proceed to the next step. Not sure how this started working. However, I get the below error when I open the DDL source editor for one particular ABAP system added in the eclipse environment. I however do not get the error when I open the DDL source editor for another system ( AH4) .I am providing the log error details . I updated the ADT installation. However the issue has not been resolved. Also I tried implementing the Note: 1834948. However I cannot find the option "Team -> Share project..." in the ABAP project.
    Thanks,
    Chakram Govindarajan

  • Problem Instanciating BO - No default attribute defined for the object type

    Hello Experts,
    I am instanciating the BO BUS2038 to ZBUS2038 and when I click in u201Cto implementedu201D and follow u201Cto releasedu201D the message No default attribute defined for the object type is appearing!
    Can anybody help, please?

    Hello everyone,
    it appears to me, that no one has a clue about the "default attribute" and is widely guessing what can be done about that.
    I feel deeply sorry for that, Marcos.
    At first: You don't really need to care about the missing default attribute. If it's missing, the object's instance key will be used instead. Skip the warning message.
    Secondly: The default attribute is used to display the instance within the "Object links & Attachments" under the work item preview when using the SAP Business Workflow.
    Thirdly: You can select any existing attribute of your business object type to be the default attribute, by navigating to the "Basic data" (it's the heat-icon within the object builder), use tab "Defaults" and use the Input Help on the field "Attribute".
    There you'll go.
    Best wishes,
    Florin

  • No element type defined for object type BSEG and system / Disp Management

    Hi all,
    I get the error message
    No element type defined for object type BSEG and system ...
    Message no. UDM_MSG006
    when I try to save a dispute case.
    What do I have overlooked in config?
    Thanks
    Hein
    Points guaranteed as always.

    Hi Sai,
    I have configured the standard settings in there.
    When I add 2 customer-disputed objects from 2 different customers I get that error.
    Any solution to this?
    Thank you!

  • ORA-23454: flavor not defined for object group "PUBLIC"."REPG" - HELP

    Hi All,
    Encountered the below error when trying to add the materialized views to the Materialized View Group in materialized view site:
    1 BEGIN
    2 DBMS_REPCAT.CREATE_MVIEW_REPOBJECT (
    3 gname => 'REPG',
    4 sname => 'FMCHC',
    5 oname => 'EMP',
    6 type => 'SNAPSHOT',
    7 min_communication => TRUE);
    8* END;
    SQL> /
    BEGIN
    ERROR at line 1:
    ORA-23454: flavor not defined for object group "PUBLIC"."REPG"
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
    ORA-06512: at "SYS.DBMS_REPCAT_UTL", line 452
    ORA-06512: at "SYS.DBMS_REPCAT_UTL", line 468
    ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 5523
    ORA-06512: at "SYS.DBMS_REPCAT_SNA", line 82
    ORA-06512: at "SYS.DBMS_REPCAT", line 1332
    ORA-06512: at line 2
    I have verified that the MASTER DEIFINATION SITE already have the group "REPG"
    Pleae advise.
    THANKS

    I think you are going to have to provide Oracle version information before anyone will be able to help you with this question.

  • Class type not defined for this object type

    Hi Friends,
    Could u please guide me ?..We have a requirement to extract some data from classification system.
    This is related with class type 023 - Batch
    I want to use the following parameters in CTBW.
    basis datasource :Z_BATCH_ATTR
    class type : 023
    object table :MCHA
    Datasource type : ATTR
    I am getting an error "Class type not defined for this object type" when i enter the above entries in CTBW.
    The only way I'm being able to make this work is changing object table from MCHA to MCH1.
    This solution does not fit me bacause MCH1 table dont have Plant as Key, and I need it.
    Do you know what should I do to solve this?
    Thanks in advance

    Hi,
    I believe we have to use the list of standard "Basis DataSource", as I'm also stuck with the same issue. Let me know what Basis Data source you selected in this case.
    As I'm trying to extract Batch attributes from "AUSP" Table.
    I have given class type= 023
    Obj Table= AUSP
    But not sure which "basis datasource" I need to select.
    Thanks,
    Satish

  • Method not defined for object

    Hello,
    When I look into one of the standard tasks in my wf, this message appears:
    "Method 'POPUPCONTABLE' is not defined for object type 'ZBUS2081'"
    This problem happens in Test (Quality - QAS) environment, but not in Development (DEV). So I have activated and generated the object type in DEV and then generated again the whole wf, and included it all into a transport request.
    After the requests were released and imported in QAS these modifications apparently did not take place, and the method is still unrecognized for that object.
    How could I make sure that this change will be included in the requests? And, is this approach right (activating the object type)?
    Appreciate your suggestions,
    Best regards,
    Ivson
    Note: There are other/similar methods in that object type, in the same wf, that work ok.

    Hi Ivson,
    The transport system can be a bit flaky, though to be fair it can get quite complex. What it tries to do in the case of interdependent objects is to attempt activation of one thing, then reactivate the other and go back and reactivate any failed ones.
    There are a few notes on OSS regarding transports and you'll see a few recommendations to simply retransport things if they failed. One way to minimize problems is to transport objects and code first, then workflows, then customizing.
    As to delegation, you said 'other attributes work' so I assumed you'd delegated. What you should be doing is creating a delegation from BUS2081 to ZBUS2081. This is effectively the reverse of inheritance and makes all your additional components in the Z-object available as part of the BUS...-obj. In your workflows you should then ONLY work with BUS2081.
    Cheers,
    Mike

  • Exception '1250' is not defined for method 'CREATE' object type 'MESSAGE'

    Dear experts,
    I set up the document distribution (SWU3, backgroundjob SMTP, activated the workflows, flagged the linkages, etc). Now, I have still a error:
    Exception '1250' is not defined for method 'CREATE' object type 'MESSAGE'
    Does anyone know what the cause of exception 1250 could be?
    Thanks in advance and kind regards,
    Samuel

    hi,
    SAP ITS is SAP Internet Transaction Server which provides connection between SAP ERP system and html client.
    Check with bassis, i think TCP/IP or work station application not configured yet. i guess?
    Benakaraja
    ??P

  • Exception '1003' is not defined for method 'SENDTASKDESCRIPTION' object type 'SELFITEM'

    Hi All,
    Please help me in this. I am trying to send a mail when user rejected the item in his inbox. I am getting error like
    Exception '1003' is not defined for method 'SENDTASKDESCRIPTION' object type 'SELFITEM'. I tried so  many ways like no attachments,send express ,siganture,encryption all disabled but still the same error from user outbox who ever rejects it.
    Regards,
    Madhu.

    Hi Madhu,
    This exception is raised means you have checked the Signature check-box  and encrypt check box.
    Now you have unchecked that the issue should be solved , but if it is still giving the same exception synchronize your run time buffer using the t-code SWU_OBUF .
    Let me know if the issue is still there.
    Regards
    Bikas

  • Method 'PROCESS' is not defined for object type 'BUS2081'

    Hi All,
    I am using a workflow for incoming invoice approval using WS20001004. I prepared one version for this. The standard business methos bus2081 i delegated to zbus2081. Here i placed one decision step for reject or approve. In the same task in inbox i can see the document i can see as attachment. Now the issue is after seeing the attachment when i click on task in  my inbox it status is changed to red and i can  not process it further.In log i can see the error like Method 'PROCESS' is not defined for object type 'BUS2081'. This method i do not have in standard or in delegated one. I was struck here. Pleas help in this.
    Regards,
    Madhu.

    Hi,
    "Here i placed one decision step for reject or approve." if your workitem is based on standard user decision step type of workflow, then the business object in underlying task should be 'DECISION' and method should be 'PROCESS'. I think in the task you have put your custom business object instead of business object 'DECISION'. This could be the reason you are facing error.
    Regards,
    Ibrahim

  • Event 'INFO_APPRAISEE_CHANGE_APPROVE' is not defined for object type

    hi all
    i made 4 workflows for MBO appraisal using APPR_DOC BO nd using std wfs- ws12300114, ws12300122, ws12300124 nd ws12300125. all r working properly in development server.
    but
    in quality all r giving errors related to evevts. as for example, for ws12300114 workflow it is giving error--
    "Event 'INFO_APPRAISEE_CHANGE_APPROVE' is not defined for object type"
    for all 4 wfs it is giving error like this related to event nd business object.
    plzzzzzzzz anybody knows thn reply or call me at 09886999122 or mail at [email protected]
    thanks in advance
    Raj

    Hi,
    Since you are saying that the object worked fine in DEV and giving problem in Quality I feel that some sort of Your Dev work was not properly included in the Transport Request and was not gone to Quality server.
    Something like EVENT activation, release status etc were not gone to Quality
    check them.
    reward if useful
    regards,
    Anji

  • "Event 'INFO_APPRAISEE_CHANGE_APPROVE' is not defined for object type 'APPR

    hi all
    i made 4 workflows for MBO appraisal using APPR_DOC BO nd using std wfs- ws12300114, ws12300122, ws12300124 nd ws12300125. all r working properly in development server.
    but
    in quality all r giving errors related to evevts. as for example, for ws12300114 workflow it is giving error--
    "Event 'INFO_APPRAISEE_CHANGE_APPROVE' is not defined for object type 'APPR_DOC' "
    for all 4 wfs it is giving error like this related to event nd business object.
    plzzzzzzzz anybody knows thn reply or call me at 09886999122 or mail at [email protected]
    thanks in advance
    Raj

    Hi,
    Since you are saying that the object worked fine in DEV and giving problem in Quality I feel that some sort of Your Dev work was not properly included in the Transport Request and was not gone to Quality server.
    Something like EVENT activation, release status etc were not gone to Quality
    check them.
    reward if useful
    regards,
    Anji

  • Class type 022 is not defined for object for BATMAS

    Hi Experts,
    while creaitng the LSMW for batch classification,I faced the error during IDOC processing as "Class type 022 is not defined for object".I am using
    Business Object      BUS1001002
    Method               SAVEREPLICA
    Message Type         BATMAS
    Basic Type           BATMAS03
    Pleas guide how to resolve the error.
    Also ,as I intend to make LSMW for batch classifications.Is this the correct way.
    Please guide on this also.
    Regards.

    Hello Jass,
    Symptom
    The BATMAS03 basis type (message type BATMAS) /FB BAPI_BATCH_REPLICATE  cannot transfer any classification information. Please review note 1070634.
    First Option :
    You should first transfer the batmas and then the clfmas idoc.
    Second Option :
    You could create the batch together with classification. Normally the problem is the missing CUOBJ_BM in table MCH1. It is not necessary in all situations that the field have to be filled, but it can be in some cases (And it is better to store the right  information in the corresponding fields). Especially when you transfer batch/classification information in other system the field have to be filled.
    The way to create the batch TOGETHER with classification by using BATMAS IDOC is to set the following parameters correctly :-
    set E1BPBATCHCTRL-DOCLASSIFY to X and fill the segments with relevant classification information
    E1BP3060_ALLOCATION
    E1BP3060_VALUATION_CHAR
    E1BP3060_VALUATION_CURR
    E1BP3060_VALUATION_NUM
    In this case the field mch1-cuobj_bm should be filled with correct CUOBJ. You can also use function module BAPI_BATCH_SAVE_REPLICA to create batches together with classification.
    Hope this information helps
    Regards
    Amber

Maybe you are looking for