FM or BAPI for reading invoice data from backend

Hi Experts,
We use SRM 4.0 and need to read invoice data from Back end (creation time and number).
Which FM I can use?
Thanks in advance
Evgeniy Vazhev

Hi,
look at the below BAPI's
BAPI_CUSTOMER_DISPLAY
BAPI_CUSTOMER_GETDETAIL2
Regards
Sudheer

Similar Messages

Reading the data from web

Hi guys ,
I am new to j2me ,i am going to start a project named onlineNews
for this project i need to read the data from web.can anyone help me with a sample code for reading a data from web
thank u for spending your precious time

that depends on the used technology on top of the web. I believe with J2ME you have access to the URLConnection class, so you can send HTTP requests manually. Otherwise you will need to use low level sockets, or use webservices such as SOAP or XML-RPC.
There is a lightweight XML-RPC client available for J2ME. It is no longer in development, but that doesn't mean that it doesn't work.
http://kxmlrpc.objectweb.org/

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt ‏2 KB
read_array.vi ‏21 KB

The problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does.

How to read a data from USB port using JAVA

hi all,
i need to know how to read a data from USB port using java. any API are available for java ?.........please give your valuable ideas !!!!!!!!!
Advance Thanks!!

You can do this. Please use this link
[http://www.google.co.in/search?hl=en&client=firefox-a&rls=org.mozilla%3Aen-US%3Aofficial&hs=uHu&q=java+read+data+from+usb+port&btnG=Search&meta=&aq=f&oq=]
What research did you do of your own? Have you done some testing application and tried yourself??

How to read the data from Excel file and Store in XML file using java

Hi All,
I got a problem with Excel file.
My problem is how to read the data from Excel file and Store in XML file using java excel api.
For getting the data from Excel file what are all the steps i need to follow to get the correct result.
Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
Thanks & Regards,
Sreenu,
[email protected],
india,

If you want someone to do your work, please have the courtesy to provide payment.
http://www.rentacoder.com

How to read the data from excel file and store into the table?

Hi All,
I have table with BLOB datatype contains a excel file. I have to read that data from excel and store into one table with all the fields in excel.
All the excel fields and my table columns are same.
Can you share with me how can acheive this using LOB's?
Thanks

Hi OraSuirya,
you can try with external tables .
syntax as follows
create table ext_table_csv (
i Number,
n Varchar2(20),
m Varchar2(20)
organization external (
type oracle_loader
default directory ext_dir
access parameters (
records delimited by newline
fields terminated by ','
missing field values are null
location ('file.csv')
reject limit unlimited;
For this you need to create directory
Directory Creation syntax:
create or replace directory ext_dir as 'D:\oracle\user_dir\ext_dir';
grant read, write on directory ext_dir to <User>;
please paste the excel file in the particular directory .
I hope this will help you.
Please correct me if I am wrong anywhere .
Thanks,
Tippu.

Reading aggregated data from a cube/multiprovider

Hi BI people
My project is currently looking for a functionmodule that reads aggregated data from a cube/multiprovider.
I already have a functionmodule that reads data from a cube and returns it in a flat format. I have debugged this, but have not found any flags that can enable the OLAP functionality needed to perform the aggregation. The functionmodule is "RSDRI_INFOPROV_READ_RFC".
The situation is that I need to apply the aggregation logic of a profit center hierrarchy to the data I read from RSDRI_INFOPROV_READ_RFC, this means manually replicating the the OLAP engine functionality (keyfigure aggregation exception, ect.) and this is not an option with the available time/budget.
Please have a look at the example below:
Say that I have a profit center hierarchy as displayed below (with postable nodes).
PC1 - $10
|---- PC2 - $30
|---- PC3 - $20
The data I'm getting back from the functionmodule RSDRI_INFOPROV_READ_RFC looks like this:
PC1 $10
PC2 $30
PC3 $20
But I need the data aggregated. An aggregation utilizing the hierarchy above will make the data look like this:
PC1 $60
PC2 $30
PC3 $20
Instead of building an aggregation program, it would be usefull if it was possible to extract aggregated data.
Any comments appreciated.
Regards
Martin

Thx Olivier,
The problem is that I need a functionmodule that can apply the OLAP aggregation for a hierarchy to the data outpu from RSDRI_INFOPROV_READ_RFC.
... or the best alternative would be if there were a fm/class that could provide me with the hierarchy aggregation of the data.
/Martin

Reading JSON data from a URL

Hi all,
I have a requirement of reading JSON data from a particular URL and using one of the value to set one property in iView. I need some info on how to get JSON data from a URL and extracting attribute's value from it.
What are the APIs that can be used for this?Can anyone provide a solution/working example in Java for this?
I am working on EP 7.3.

Hi Tarun,
JAXB should work for you. Take a look at this example:
JAXB JSON Example | Examples Java Code Geeks
Regards,
Tobias

Reading the data from BLOB column

HI,
I have a table with following structure
Test_Mail(Attachment BLOB,Attachmentname varchar2(255),FileSize number)
The data in the table is like
Attachment|Attachmentname|FileSize
BLOB|test.txt|1236
I wants to read the data from the BLOB attachment in to new file.
can any one help me in doing this with plsql??
Thanks in advance,
Balaji tk.
Edited by: Balaji.tk on Jan 9, 2011 9:28 PM

May be something like this ?
DECLARE
   l_file       UTL_FILE.FILE_TYPE;
   l_buffer     RAW (32767);
   l_amount     BINARY_INTEGER     := 32767;
   l_pos        INTEGER            := 1;
   l_blob       BLOB;
   l_blob_len   INTEGER;
BEGIN
-- Open the destination file.
   l_file := UTL_FILE.FOPEN ('TEST_DIR', v_attachment_name, 'wb');
   --This v_attachment_name can be selected from your table.
-- Get LOB locator
FOR rec IN (
SELECT attachment   l_blob
      FROM test_mail
     --Your where condition to find the row.
   --AND ROWNUM =1
LOOP
   l_blob_len := DBMS_LOB.getlength (rec.l_blob);
-- Read chunks of the BLOB and write them to the file
-- until complete.
   WHILE l_pos < l_blob_len
   LOOP
      DBMS_LOB.READ (rec.l_blob, l_amount, l_pos, l_buffer);
      UTL_FILE.put_raw (l_file, l_buffer, FALSE);
      l_pos := l_pos + l_amount;
   END LOOP;
commit;
END LOOP;
-- Close the file.
   UTL_FILE.FCLOSE (l_file);
EXCEPTION
   WHEN OTHERS
   THEN
-- Close the file if something goes wrong.
      IF UTL_FILE.IS_OPEN (l_file)
      THEN
         UTL_FILE.FCLOSE (l_file);
      END IF;
      RAISE;
END;

Reading the data from one component view into another component view

Hi All,
I have requirement to read the data from one component into another component while creating the service order. Here are the details.
Main View for Service order: BT116H_SRVO in that we have two assignment blocks like Organizational data(BTORGSET) and amount allocation(BTAMNTALL).This two blocks are two different component which are associated with main component(BT116H_SRVO).
I need to read the sales org data from component/View(BTORGSET/Orgsetdata) into Component/View(BTAMNTALL(HdrBillPlanDet) method DO_VALIDATE_INPUT.
I searched in SDN but all the posts are related to the data exchange between two views in same component. But My scenario is different as explained above.
Refer the attachments for the component link..
Please let me know how we can achieve this one..
Thanks,
Sapsar.

Finally I was able to fix my code...My Mistakes were need to read the parent node above three levels and need to use the relation entity name while reading the data..
Below is the correction code
IF iv_index IS NOT INITIAL.
     lr_iterator ?= collection_wrapper->get_iterator( ).
     lr_current ?= lr_iterator->get_by_index( iv_index ).
     lr_entity ?= lr_iterator->get_by_index( iv_index ).
   ELSE.
     lr_current = collection_wrapper->get_current( ).
   ENDIF.
*loop back to root entity
         WHILE lr_entity->get_name( ) NE 'BTAdminH'.
           lr_entity = lr_entity->get_parent( ).
         ENDWHILE.
*Get the related entity
         IF lr_entity IS BOUND.
           lr_collection ?= lr_entity->get_related_entities( iv_relation_name = 'BTHeaderOrgmanSet' ) .
           IF lr_collection IS BOUND.
             lr_orgset_m = lr_collection->get_current( ).
*            lr_orgset = lr_orgset_m->get_related_entity( iv_relation_name = 'BTOrgSet' ).
             lr_orgset = lr_orgset_m->get_property_as_string( 'SALES_ORG' ).
           ENDIF.
         ENDIF.
Thanks,
Sapsar.

Reading the data from excel file which is in application server.

Hi,
Iam trying to read the data from excel file which is in application server.
I tried using the function module ALSM_EXCEL_TO_INTERNAL_TABLE. But it didn't work.
I tried just reading using open data set and read data set it is giving junk characters.
Please suggest me if you have any solution.
Best Regards,
Brahma Reddy

Hi Narendra,
Please see the below code I have written
OPEN DATASET pa_sfile for INPUT in text mode ENCODING DEFAULT MESSAGE wf_mess.
CHECK sy-subrc = 0.
DO.
READ DATASET pa_sfile INTO wf_string.
IF sy-subrc <> 0.
EXIT.
else.
split wf_string at wl_# into wf_field1 wf_field2 wa_upload-field3
wa_upload-field4 wa_upload-field5 wa_upload-field6 wa_upload-field7 wa_upload-field8
wa_upload-field9 wa_upload-field10 wa_upload-field11 wa_upload-field12 wa_upload-field13
wa_upload-field14 wa_upload-field15 wa_upload-field16 wa_upload-field17 wa_upload-field18
wa_upload-field19 wa_upload-field20 wa_upload-field21 wa_upload-field22 wa_upload-field23
wa_upload-field24 wa_upload-field25 wa_upload-field26 wa_upload-field27 wa_upload-field28
wa_upload-field29 wa_upload-field30 wa_upload-field31 wa_upload-field32 wa_upload-field33
wa_upload-field34 wa_upload-field35 wa_upload-field36 .
wa_upload-field1 = wf_field1.
wa_upload-field2 = wf_field2.
append wa_upload to int_upload.
clear wa_upload.
ENDIF.
ENDDO.
CLOSE DATASET pa_sfile.
Please note Iam using ECC5.0 and it is not allowing me to declare wl_# as x as in your code.
Also if Iam using text mode I should use extension encoding etc.( Where as not in your case).
Please suggest me any other way.
Thanks for your help,
Brahma Reddy

Reading the data from dataset

Hi all,
Can i read the Data from more than one Dataset at a time ?
If yes.. How ? If not...Why ?
Thanks in Advance
Krish...

You can open up to 100 datasets at the same time for every internal session.
For stability, put a TRY...CATCH...ENDTRY on these exceptions:
CX_SY_FILE_OPEN
CX_SY_TOO_MANY_FILES
...like this:
TRY.
OPEN DATASET sapfile FOR INPUT IN TEXT MODE ENCODING DEFAULT.
[your code]
CATCH: cx_sy_file_open,
cx_sy_too_many_files.
ENDCATCH.
CLOSE DATASET sapfile.
Hope this helps.

Reading the data from the BufferReader????

Hi,
When i read the data from the BufferReader Like:-
// Reading the data
sbAppendBuf.append(""+"\r\n");
I am getting an extra new line character before the Closing Tag. Where the output is like:-

How the extra space is coming i am not so sure where "\r" is needed for the proper alignment.So it is needed.
Please do provide a solution for this..
Thanks,
JavaLover

Here the snippet of my code:-
sbAppendBuf.append(""+"\r\n");
Thanks,
Java Lover

Reading the data from network card

Hi,
java.net defines the class NetworkInterface. Currently there are two network cards, one is wireless and another is for LAN.I am able to retrive their names and IP addresses using NetworkInterface methods.How to read the data from a specifc network card? Can we read all TCP packets which are passed through network card?
using socket?
Regards
prasanna

pdiwadkar wrote:
Hi,
java.net defines the class NetworkInterface. Currently there are two network cards, one is wireless and another is for LAN.I am able to retrive their names and IP addresses using NetworkInterface methods.How to read the data from a specifc network card? Can we read all TCP packets which are passed through network card?
using socket?
Regards
prasannaYou may already know that Java is not good at doing some 'low level stuff'.
You cannot use (pure) Java to access the raw network data.

Populate a table reading the data from a TXT file

how can I populate a table reading the data from a TXT file?
thanks

Hey Kevin!
Using FORMS.TEXT_IO to bulk load data from a file strikes me as re-inventing the wheel. It is just about justifiable in a self-service environment, but I regard the EXTERNAL TABLE is a better solution for that situation as well.
The same applies to UTL_FILE. I think the ability to read text with UTL_FILE is primarily intended for read file-based configuration or file manipulation/processing rather than data loading.
Re-writing a text file into SQL statements is too much like hard work (even with an editor that supports macro definition and regular expressions) for no real benefit. You lose all the bulk load peformance you would get from SQL*Loader. But for QAD I'd probably let you off with it.
You missed out one obvious alternative: using Java to turn the contents of an XML file into a CLOB and inserting it into a table which is read by a PL/SQL procedure that parses the XML records and insert the retrieved data into a table.
Stay lucky, APC

FM or BAPI for reading invoice data from backend

Similar Messages

Maybe you are looking for