FM Planning Layout Error

Hello,
I am getting an ABAP error when I try either to create or change a planning layout for funds management and also if I try to change plan data in an existing layout. Are there steps in customizing I am not aware of? I have set-up funds management using BCS and everything seems to work fine. I can create budget entry documents but not planning documents.
Thanks for any help!

Look at the dump in st22 and errors in sm21 .check the transaction code SNOTE to check whether the note 1024741 is implemented.
The following is from the above note:
Solution for your problem.
Import Support Package 13 for SAP NetWeaver 2004s BI (BI Patch 13 or SAPKW70013) into your BI system. The Support Package is available once Note 991093 "SAPBINews BI 7.0 Support Package 13", which describes this Support Package in more detail, has been released for customers.

Similar Messages

Planning Layout error K9162 - max number of columns in planning layout rest

Hello collegues,
our client would like to have 34 columns in planning layout costs activity inputs of TA KP67. But error message K9162 - max. number of columns is restricted to 30. So I tried to switch of the message with TA OBA5 application area K9 - msg number 162. But this does not work as the error comes up again even though the message is switched off.
Do you have some ideas?
Thanks and regards,
Christian

Hello,
thanks for your response. I have maintaine in OBMSG:
K9 162 WE E switch off selected
then in OBA5 for dialog and batch I have maintained -
but the error is upcoming again. So I think that this sort of message cannot be switched off as the planning layout is restricted to 30 columns by design maybe?
thanks and regards,
Christian

Planning layout error while opening

Hi,
Planning layout is not opening, but it was worked for the past two months.
It shows the below while opening of the planning layout..
Errror reading of data from the info provider.
System error in program in CL_RSDRC_SELDR_SRVS and Form_Seldr_to_slide_node_ch01
Regards
Perasel
Edited by: Perasel on Aug 13, 2008 3:47 PM

Look at the dump in st22 and errors in sm21 .check the transaction code SNOTE to check whether the note 1024741 is implemented.
The following is from the above note:
Solution for your problem.
Import Support Package 13 for SAP NetWeaver 2004s BI (BI Patch 13 or SAPKW70013) into your BI system. The Support Package is available once Note 991093 "SAPBINews BI 7.0 Support Package 13", which describes this Support Package in more detail, has been released for customers.

Error message when I calling planning layout in the STS

Dear
I'm trying to use Status and Tracking System with BPS ( SEM 4.0 SP10, BW 3.5 SP14 ).
But I got some error messages when I calling planning layout in the STS screen..
I designed 2 lower unit(A,B) and 1 upper unit(C) for the test. and using Bottom-up work-flow.
I did
1. Create Planning Area in the BPS0 ( also Level, Package, Layout ..)
2. Created Web Interface in the Web Interface Builder using the upper BPS Layout .
3. Customizing STS
    - Create Sub Plan & Session
    - Asssign Hierarchy to Sub Plan
    - Determine attribute for created planning session ( Bottom-up, Auto mail )
    - Define Header characteristics for planning session to contains the planning package completely.
    - Determine Date, Person Responsible and Layout.
4. Send Start mail
5. Open STS Web Start Screen ( using B Unit responsible user .)
When he click "Open Planning" icon in the screen the following error messages were happened...
I've no idea for that because I didn't use any variables or offset settings.
I guess that comes from header settings for the planning session because when I deleted the header settings for the planning sessions, I could see the planning layout.
but I could not use lock processing in the STS.
Could you tell me what's happening to me?
[ Following error message ]
Correct the data on variables and offset in character string "?
Message Number UPC_FW092
Long Text Diagnosis
Character string "", which contains data on the variables and offset, has an invalid format, and cannot be converted.
Procedure
Correct the character string, so that it has the correct format. A correct entry on variable and offset has the following form:
<VARIABLE_NAME> [{ + | - } OFFSET]
Examples:
VAR0
VAR1+1
VAR2 - 2.
Also check whether the variable, that you want to use is available in the planning area.

Hello,
this seems to be a bug. The error message should include a variable name between ''. Since there is none, the function that raises the error was not called correctly.
It's not likely that this is related to STS since STS does not use variables at all. It's probably a problem with the layout. If you can't resolve it, please open a message to SAP Support.
Regards
Marc
SAP NetWeaver RIG

Error while configuration of CRM Planning Layout in BW

Dear Experts,
While configuring Planning Layout in BW system for CRM. Received following error messages
1. Planning Services Error
2. RFC error: Independent time characterstic in level. Layout cannot be executed.
The Planning Layout has been designed with reference to document " “ How to Build Planning Layouts and Integrate it With CRM System.pdf”.
Please find the following link for the reference document.
How to Build Planning Layouts and Integrate it With CRM System
Could some one please help us on this.
Thanks,
Khader

Dear Experts,
While configuring Planning Layout in BW system for CRM. Received following error messages
1. Planning Services Error
2. RFC error: Independent time characterstic in level. Layout cannot be executed.
The Planning Layout has been designed with reference to document " “ How to Build Planning Layouts and Integrate it With CRM System.pdf”.
Please find the following link for the reference document.
How to Build Planning Layouts and Integrate it With CRM System
Could some one please help us on this.
Thanks,
Khader

Error When generating the plan layout

Dear All,
When i try to generate the file description for COPA planning through KP34ER, i get the following error..
I have checked all four points that they have mentioned. Any idea why this coud be?
No data has been entered yet.
Message no. KG845
Diagnosis
The planning layout you are using (COPAGI) only contains selection criteria for which no data has yet been entered. As a result, the system cannot display any plan data.
In this layout it is not possible to add characteristic values. This could be due to the following:
1. Manual planning is not allowed for the specified record type. Only record types A, F, G, E, and your user-defined record types can be planned manually.
2. The planning layout was only defined to contain actual data. The plan/actual indicator "1" is nowhere specified.
3. The selected plan version cannot be planned.
4. The lead column was defined so that only the texts of the characteristic values are displayed. As a result, no new characteristic values can be added in planning.
Procedure
Proceed as follows, depending on what the cause was:
1. Use a record type that can be planned manually.
2. None
3. Choose another plan version that can be planned.
4. Change the planning layout so that the key of the characteristic values is displayed in the lead column.
Thank you
Gayani

Hi,
Another possible reason could be, that in the general data selection of the layout is used the characteristic which is not restricted in the plannig package to the single value:
Example:
Let say the char. Country is used in the general data selection and is not restricted in the pl. package. Since the value for the
general data selection characteristic is not possible to enter in the layout, it is not possible to enter any data, because the user
could not enter for Country and the system doesn't know for what Country the planning is done. If you restrict the Country in the pl. package to single value (e.g. JP) then it will work, since the system knows now, that the data which will be entered belongs to the Country = JP.
So please make sure, that all general data characteristics are restricted to the single value in the planning package. Then it will work.
When we specify single value the planlayout can be displayed with "0" because of there is in this case already created (together with values of other characteristics) a concrete profitability segment that exists certainly. That means system can find and display this profitability segment.
But when we put interval 0000 - ZZZZ for a characteristic system doesn't know which values from this interval are the valid values that are able to be displayed for planning. For example the value 1010 can exist but 2020 does not exist and it would make no sence to offer these invalid values for display of planning data.
In general, message KG845 in case of selection defined by interval is raised also due performance reasons. Selection
defined by interval(s) could lead to big number of possible combinations, which should be displayed regardless of fact that no data are already posted in database.
The idea is following- if there is selection defined by single values, then we don't care about performance and we display data (empty) values as it's fast(regardless of fact that no data are posted in database). In case of selection by interval, performance is an issue because we have to display all combinations of data, which can be generated. This could lead to thousands of possible combinations and long system response. This is not intended and it makes no real sense. Basic idea
here is that we use different approach in case that selection is defined by interval and different approach, when selection is defined by single value.
I hope this helps.
regards
Waman

ERROR in BPS Planning layout

Anyone got a clue??
We have characterstic txt. values exceeding 20 characters - resulting in an error in the BPS planning layout: <i>Characteristic value not valid</i>.
The planning layout only takes 20 characters - need it to take more - we have characteristic values with 30 char length. What can we do?
John

Hi Mike,
Thank U for your response - The masterdata is maintained and the planning layout in question has been working before. We just recently upgraded to BW 3.5 and then masterdata characteristics with value exeeding 20 characters the planning layout does not recognize. This results in an invalid error statement.
Is there a SAP Note that can handle this or do I have to make an OSS?

Error in accessing TPM Planning Layout

Hi Guys:
We are using CRM6.0 Web Client to execute Trade Promotion, and here are the data we are creating a new TPM with:
            Account Type: Hierarchy Node
            Our BP Hierarchy has only one node under the root node, so we assined that node
            Product Planning Basis: Product Category and Product
            Planning Profile Group: Standard Trade Promotions Management
Besides the above data, we have Buying Date: 07/14/2008 - 12/28/2008
When we click on the Planning on under Planning bar on the web Client,
we get the following error:
"Planning Services Error"
"Value DD416011AB7C38F1BF820015172CFB73 is not perm itted for characteristic BP: Group (Hier.)"
"Value DD416011AB7C38F1BF820015172CFB73 is not perm itted for characteristic BP: Group (Hier.)"
where DD416011AB7C38F1BF820015172CFB73 is BP GUID
Has anyone faced similar situation, or any suggestion on what could be wrong here.
We are on BI7.0 and CRM 2007.
Thanks,
-Ram

Hi Ram,
It seems your Master data was not extracted to BI.
Your hierarchy is defined in CRM but does not exist in BI
Yo have to run you BI extractors for your Business partner hierarchies.
Yann

Error in Planning layout since Excel 2007 Service Pack 2

Hi,
since I updated Excel 2007 from Service Pack 1 to 2 I have a problem with the planning layouts in upspm.
When I open a planning folder with an input layout with excel inplace, a second instance of excel is opening without a sheet.
When I close this excel I can work with the layout.
This bug is definite since SP2 in Excel 2007.
Is there a solution for this?
I'm using SAP GUI 7.10 Patch 5

Hello Tobias,
in fact, with SP2 Microsoft has changed when security checks are performed. More details can be found here:
http://support.microsoft.com/?kbid=2009802
There is also a SAP note 1425448 (that contains a link to the MSDN-Knowledge-Base). Technically in SAP Desktop Office Integration the SAPGUI is a container for Excel (inplace activation). You will get the same effect when you embed e.g. an Excel file with macros as an object in a word file. It is even worse in the latter case:
- I get two VBA 'stop' pop ups with no information
- Then I get the security warning pop-up (activate or deactivate the macros) -> activated
- Then Excel opens, but deactivated, no document is disypled: Excel main window visible
- Then one get a pop-up below the Excel window that claims that there is no Excel installed (?)
- It is impossible to close Excel, the Excel process has to be deleted via task manager ...
I hope that this MSDN article is not the final word about this issue.
Regards,
Gregor

Using a variable/drop down list in header of planning layout

Dear all,
I have created a simple BPS application for purely GL planning (No CO related objects like cost centre involved). I have the following characteristics in the header of the manuel planning layout.
Business area
Chart of accounts
Company code
Currency
Currency Type
Fiscal year
Fiscal Year Variant
Fiscal year/period
Value type
Version
I have created variables for Business area, Fiscal Year, Fiscal Year Period, Posting Period and Version. The client wants either a variable or a drop down list for these characteristics in the header in the web application. When I assign a variable and put the characteristic in header, I get the error message in the web application saying header characteristic can only have a fixed value. Can someone tell me if it is possible and if so than how? I'll be very grateful for any inputs. Thanks a lot.
Regards,
Sumit

Hi,
When you create a variable, assign some values to the variable. These then become available in the drop down box. Ths first time a Web interface is called, these variable values are initial.As a result, u get the error messages. Select the variable values and then the error message should go away.
Thanks,
-NS

Issue regarding Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART in SAP TPM IP

Gurus,
I am facing an issue regarding SAP TPM IP ( HANA)
I have 3 Infoproviders
Planning infocube, Planning DSO1, Planning DSO2 and i created multiprovider and added these 3 infoproviders into it. I have created Aggregation level on multiprovider. Created Bex Input ready query on Aggregation level.
Issue is Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART.
I tried debugging it and found it is trying to read i_r_pro -> n_ts_part. It is populated with only 3 values (i.e. 2DSOs and 1 Cube), whereas <l_partprov>-partprov is referring to Aggergation level, hence read statement isn't successful, it is dumping.
The class CL_RSD_INFOPROV_CACHE->GET() method is trying to populate the N_TS_PART.N_TS_PART uses P_R_INFOPROV table which seems to be already populated. So, I debugged all the below methods to find out how the P_R_INFOPROV but couldn't find any clue.
Can any one help,it would be really help.
Thanks
Ashok

Hello Gregor,
On the launch of planning layout it throws an error message:
Planning is not possible RSCRM_IMP_CORE008.
When I debugged, i got to a point wherein
particular Real Time Planning DSO is
not getting retrieved under the MultiProivder in below class.
Class: CL_RSCRM_IMP_ACTIONS_SERVICE, Method: GET_INFOPROV is not
returning the real time Info-Provider Name(i.e. Planning DSO)
underlyingthe Multiprovider.
I've also tried to run the report mentioned by you for the Multiprovider but issue still exists.
Let me know, if you have any pointers on this topic.
Thanks,
Jomy

Retreive the values from a user Input Popup before planning layout

Hi all,
The user run a planning layout and is coming the popup where he can choose :
Cost Center
Currency .
Is there any function module between executing the popup and showing the layout.
I have to create a function module to check the entries of the users.
Regards

Frank,
There are multiple ways to ensure that the values entered by the users are valid. A few of them are:
1. Restrict values for users with in SEM planning area.
2. Write custom code to restrict values in dropdown list.
3. Another way of doing it is by using two sets of variables. One for input by users and the other for passing the values in the planning level. The user would enter a value, the code for passing the value to the planning level, would check the data entered and then either pop up an error message or refresh the layout with the data.
As mentioned, the approach would depend on the specfic need and the design of the planning application.
Sunil

Planning layout is not working in CRM

Hi Guru's,
I have created one planning profile under one planning layout in BW. Then I had configured this pallning profile in CRM-TPM. When I m going to creat Trade Pramotion. The planning layout is not work.
After puting a Planning Profile Grp. "Volume/Trade Spend" new tab will be appeared Its shows following error
Error in planning Services
Error Message count : 0001
Attribute 0BPARTNER has not value
It means 0BPARTNER infoobject have novalues. then I had entered Customer Master data in CRM with the help of CRM consultant, Then I have pulled the same data in BW. But still I am facing this Error.
If you know about this error. Please guide me. I]ll reared to maximum points.
Regards
Manoj Kulkarni

Hi Ravi,
Hope you would have handled this issue.
My problem is what ever the planning profile I had created in SEM BPS (BW System component version BW 7.,4) using BPS0 t-code, I am unable to retrieve the same in CRM system while trying to assign the same to the planning group.
At CRM end, In the below navigation i.e SPRO->CRM->Define Transaction types-> created & then while assigning the Planning profile in SEM Planning tab, I am unable to retrieve the ones I had created in BW-BPC (BW 7.4).
Could you pls let me know what I would be missing here.
We are in very beginning stage i.e testing the connections & communications, yet to start the configuration of TPM in CRM.
Thanks.

New Empty Rows in Planning Layout

Hi All
I am having a bit of a rough time with 2004S and planning layouts. In order to test that I am not doing something stupid (which is fairly likely) I have created a simplified model (IC, Aggr Level etc etc) with which to prototype.
I have an InfoCube with the following structure:
Char: Company     ZCH_KCO
      Job         ZCH_JOB
      Plan Item   0SEM_POSIT
      Value Type 0VTYPE
      Version     0VERSION
KeyF: Amount      0AMOUNT
Time: Fisc Per    0FISCPER
      Fisc Var    0FISCVARNT
Unit: Curr Key    0CURRENCY
I have defined my Aggregation Level in the Planning Modeler to include all the InfoObjects in the InfoCube. I have not defined a Filter on this Aggregation Level.
I then created a Query to include all the characteristics in the Rows and the Key Figure in the Column.
Last, but not leats, I popped it into a Web Template where I assigned the Query to an Analysis Web Item and I set the "Number of New Lines" attribute to 10.
When I execute it, I get the following [rather comprehensively documented] error message appearing at the top of the report:
"No new row or column added because not all characteristics have a key cell"
Anyone got any ideas?
Cheers - D

Hi Daneel,
I have not experienced the error you mention but have managed to get input-ready planning queries to work, so I will offer a couple of suggestions:
1. Make sure that your key figure is marked as being input ready ("can be changed" on the Planning property tab)
2. Values need to be uniquely defined to be input ready. Try putting restrictions on your characteristics to refine the data. Eg. put value type, version etc.. in the filter area and restrict them - put only the Plan item in the rows.
3. Make sure you do not have zero suppression enabled on rows and column structures.
Also, refer to this help section which may be useful:
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/43/f234619e3c4c5de10000000a155369/frameset.htm">Manual Planning in NW2004s</a>
Good luck!

Planning Layout KP75 - Max 30 columns allowed in the layout

Hi,
I am trying to create a Planning layout(Excel Upload for KP26) in Transaction Code KP75.
But when i am trying to create the columns, it is giving the error message that "Max of 30 column are allowed in the planning layout".
But my requriement is to have around 40 columns.
So is there any way that we can extend the max columns allows to 40.
Regards,
Shree.

What kind of planning you are doing in 40 columns? Can you please elaborate.

FM Planning Layout Error

Similar Messages

Maybe you are looking for