FM to check the date

Dear All,
Please advice the right function module to check whether the date entered is a valid one.
Thanks
Ravindra Suvarna

Try the DATE_CHECK_PLAUSIBILITY function module.
Sample code.
call function 'DATE_CHECK_PLAUSIBILITY'
       exporting
            date                      = p_datum
       exceptions
            plausibility_check_failed = 1
            others                    = 2.
Regard,
Rich Heilman

Similar Messages

How to check the date and time when a material is blocked

Hello,
Please tell me how can i check the date and time when a material is blocked or unblocked.
Regards,
Priyanka

Hi Pryianka,
Are you speaking about blocked status of material master ('X-plant matl status' > MM03 > Basioc view 1; 'Plant-sp. matl status' > MM03 > MRP 1) or your problem is to find out the date when your material was booked into blocked state (stock category).
If your problem is about mmr you can use the above mentioned MM04 (or MM03 > menu > Environment > Display changes).
If your problem is to find out when your goods were posted to blocked stock you have to use MB51 + relevant movement types (e.g. 103, 344) + batch + etc. ()
BR
Csaba

SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

Hi,
I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
"An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
Thanks in advance.
Poomani Sankaran

Hi Poomani,
Thanks for posting your issue,
you must have to Install SQL Server 2012 ADOMD.Net on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

HT4859 How can I verify that my App data is actually stored in iCloud. With Dropbox, I can actually see my stored files. With iCloud, itseems I'm supposed 2 just trust that Appl has the data. Short of doing a restore is there no way to check the data?

How can I verify that my App data is actually stored in the iCloud. I can see and access my notebook, contacts etc. on the iCloud website, and I can see my photos in a folder on my Windows-based desktop compter (iCloud/Photostream). But no app data.
With Dropbox, I can actually see all of my stored files. With iCloud, it seems, I'm supposed to just trust that Apple has my back. Short of deliberately trashing my app data and then attempting a restore, is there no way to check the data?

You can't access them on Windows (unless you have iCloud enabled Windows programs) and I don't think any are, yet.
iCloud data is accessed via Apps/Programs, the Windows programs vendors will have to step up (just to make it worse Microsoft have not yet enabled their Mac programs, such as Office yet) I doubt that iCloud access is much of a priority for them, complain to MS, when enough Windows users complain maybe they'll do something.

How can I check the date of purchase for my MacBook Pro?

I need to fill out a claim in order to get OS X Mountain Lion and I need the date of purchase. I have tried putting in the serial code under check your service and support coverage but it just gave me a vague statement thatit was purchased mid 2012. Could someone please tell me how I can check the date of purchase?

Well, correction, just checked mine...
Tells you exipry date of warranty, simply take 1 year off of this or 3 if you have AppleCare.
There is your purchase date.

Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).

Hi,
Our Environment is Essbase 11.1.2.2 and working on Essbase EAS and Shared Services components.One of our user tried to run the Cal Script of one Application and faced this error.
Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).
I have done some Google and found that we need to add something in Essbase.cfg file like below.
1012704 Dynamic Calc processor cannot lock more than number ESM blocks during the calculation, please increase CalcLockBlock setting and then retry (a small data cache setting could also cause this problem, please check the data cache size setting).
Possible Problems
Analytic Services could not lock enough blocks to perform the calculation.
Possible Solutions
Increase the number of blocks that Analytic Services can allocate for a calculation:
Set the maximum number of blocks that Analytic Services can allocate to at least 500.
If you do not have an $ARBORPATH/bin/essbase.cfg file on the server computer, create one using a text editor.
In the essbase.cfg file on the server computer, set CALCLOCKBLOCKHIGH to 500.
Stop and restart Analytic Server.
Add the SET LOCKBLOCK HIGH command to the beginning of the calculation script.
Set the data cache large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH setting.
Determine the block size.
Set the data catche size.
Actually in our Server Config file(essbase.cfg) we dont have below data added.
CalcLockBlockHigh 2000
CalcLockBlockDefault 200
CalcLockBlocklow 50
So my doubt is if we edit the Essbase.cfg file and add the above settings and restart the services will it work? and if so why should we change the Server config file if the problem is with one application Cal Script. Please guide me how to proceed.
Regards,
Naveen

Your calculation needs to hold more blocks in memory than your current set up allows.
From the docs (quoting so I don't have to write it, not to be a smarta***:
CALCLOCKBLOCK specifies the number of blocks that can be fixed at each level of the SET LOCKBLOCK HIGH | DEFAULT | LOW calculation script command.
When a block is calculated, Essbase fixes (gets addressability to) the block along with the blocks containing its children. Essbase calculates the block and then releases it along with the blocks containing its children. By default, Essbase allows up to 100 blocks to be fixed concurrently when calculating a block. This is sufficient for most database calculations. However, you may want to set a number higher than 100 if you are consolidating very large numbers of children in a formula calculation. This ensures that Essbase can fix all the required blocks when calculating a data block and that performance will not be impaired.
Example
If the essbase.cfg file contains the following settings:
CALCLOCKBLOCKHIGH 500 CALCLOCKBLOCKDEFAULT 200 CALCLOCKBLOCKLOW 50
then you can use the following SET LOCKBLOCK setting commands in a calculation script:
SET LOCKBLOCK HIGH;
means that Essbase can fix up to 500 data blocks when calculating one block.
Support doc is saying to change your config file so those settings can be made available for any calc script to use.
On a side note, if this was working previously and now isn't then it is worth investigating if this is simply due to standard growth or a recent change that has made an unexpected significant impact.

HT4623 I have an IPhone4 and is updated with version 6.1.3 and I am not able to connect with face time calls. I have checked the date ant time. I used to be able to use face time with no problem. since the late os upgrace I have not been able to connect w

I have an IPhone4 and is updated with version 6.1.3 and I am not able to connect with face time calls. I have checked the date ant time. I used to be able to use face time with no problem. Since the late os upgrace I have not been able to connect with face time.

Read http://support.apple.com/kb/ts3367

Check the date format

Hi,
Can anybody tell me how to check the date format in BDC while updating.
The system date format is like mm/dd/yyyy. Check the dates format, in case of error return the following message The date format should be YYYYMMDD.
Thanks......

Dear Anil,
This is a common problem, when carrying out BDC.
For example, while recording you met with the field --> MKPF-BUDAT.
Go to SE11 --> MKPF --> Search for BUDAT --> Double click on the Data Element i.e. BUDAT --> Double Click on the domain DATUM --> You can see under the block Output Characteristics : Output Length = 10.
While declaring the TYPES Structure, make it CHAR(10).
Consider this technique as the Rule-of-Thumb while doing BDC.
Regards,
Abir
Don't forget to award points *

TS1368 My account keeps asking for Region but the drop down menu lists Cities in China. I can,'t cange the region in my account because it asks me to check the date and time but these are correct. Any answers please?

My account keeps asking for Region but the drop down menu lists Cities in China. I can,'t cange the region in my account because it asks me to check the date and time but these are correct. Any answers please?

Look, I understand I still need a card attached to the account. The problem is, it won't accept my card because I only have 87 cents in my bank account right now.
If I had known there would be so much trouble with the iTunes card, I would have just put the cash in my bank account in the morning instead of buying an iTunes card (I didn't expect the banks to be open on Thanksgiving of course).
Apple will only accept cards that have a balance. The balance is so small in my account that it won't accept it as a valid card.
I'm going to have to contact Apple anyway to reset the security questions. That's obvious. Your answers were not exactly helpful. You didn't tell me anything I don't already know, but thanks for trying to be helpful.

Is there a possibility to check the date on which an app was re-installed?

I am aware of the purchase history which allows me to see when I first time installed a certain app, but when I delete that app from my iPhone then re-install it from the Cloud on another day, say X, the purchase history doesn't help me seeing this date X, which is for me the re-installation date.
Is there a possibility to check the date on which an app was re-installed?
Thank you

I read that you say the content should be deleted, so I still wonder if they get deleted, especially after I have just noticed this;
Install an App then delete it while it is running in the background. Head to the store again and install it, you will see that the app is still in the background.
I believe some records of the App exist after deleting it, regardless of who can access them. I will try checking with somebody who has a Jailbroken device.

Is thre any view to check the date & time of switch ovr frm prim to standby

Hi All,
Is there any view to check the date and time of switch over from primary to standby.
Thanks,

784786 wrote:
Which parameter of v$database can give us the switchover date and time. Please let me know?
SQL> desc v$database
Name                            Null?    Type
DBID                                  NUMBER
NAME                                  VARCHAR2(9)
CREATED                             DATE
RESETLOGS_CHANGE#                        NUMBER
RESETLOGS_TIME                         DATE
PRIOR_RESETLOGS_CHANGE#                   NUMBER
PRIOR_RESETLOGS_TIME                        DATE
LOG_MODE                             VARCHAR2(12)
CHECKPOINT_CHANGE#                        NUMBER
ARCHIVE_CHANGE#                        NUMBER
CONTROLFILE_TYPE                        VARCHAR2(7)
CONTROLFILE_CREATED                        DATE
CONTROLFILE_SEQUENCE#                        NUMBER
CONTROLFILE_CHANGE#                        NUMBER
CONTROLFILE_TIME                        DATE
OPEN_RESETLOGS                         VARCHAR2(11)
VERSION_TIME                             DATE
OPEN_MODE                             VARCHAR2(20)
PROTECTION_MODE                        VARCHAR2(20)
PROTECTION_LEVEL                        VARCHAR2(20)
REMOTE_ARCHIVE                         VARCHAR2(8)
ACTIVATION#                             NUMBER
SWITCHOVER#                             NUMBER
DATABASE_ROLE                             VARCHAR2(16)
ARCHIVELOG_CHANGE#                        NUMBER
ARCHIVELOG_COMPRESSION                    VARCHAR2(8)
SWITCHOVER_STATUS                        VARCHAR2(20)
DATAGUARD_BROKER                        VARCHAR2(8)
GUARD_STATUS                             VARCHAR2(7)
SUPPLEMENTAL_LOG_DATA_MIN                   VARCHAR2(8)
SUPPLEMENTAL_LOG_DATA_PK                   VARCHAR2(3)
SUPPLEMENTAL_LOG_DATA_UI                   VARCHAR2(3)
FORCE_LOGGING                             VARCHAR2(3)
PLATFORM_ID                             NUMBER
PLATFORM_NAME                             VARCHAR2(101)
RECOVERY_TARGET_INCARNATION#                   NUMBER
LAST_OPEN_INCARNATION#                    NUMBER
CURRENT_SCN                             NUMBER
FLASHBACK_ON                             VARCHAR2(18)
SUPPLEMENTAL_LOG_DATA_FK                   VARCHAR2(3)
SUPPLEMENTAL_LOG_DATA_ALL                   VARCHAR2(3)
DB_UNIQUE_NAME                         VARCHAR2(30)
STANDBY_BECAME_PRIMARY_SCN                   NUMBER
FS_FAILOVER_STATUS                        VARCHAR2(22)
FS_FAILOVER_CURRENT_TARGET                   VARCHAR2(30)
FS_FAILOVER_THRESHOLD                        NUMBER
FS_FAILOVER_OBSERVER_PRESENT                   VARCHAR2(7)
FS_FAILOVER_OBSERVER_HOST                   VARCHAR2(512)
CONTROLFILE_CONVERTED                        VARCHAR2(3)
PRIMARY_DB_UNIQUE_NAME                    VARCHAR2(30)
SUPPLEMENTAL_LOG_DATA_PL                   VARCHAR2(3)
MIN_REQUIRED_CAPTURE_CHANGE#                   NUMBERAre you admitting that after reviewing the content of this VIEW, that you see nothing that might contain the detail you desire?
The switch over is also logged to alert_SID.log on both Primary & Standby

How to check the date is initial in the calculated keyfigure

Hi,
While calculating the difference between the two dates , i need to check the date is having the values or not in the calucluated key figures .how to achieve this .
number of days = delviered date - creation date
All the dates are key figures
Regards,
Raj

Hi there,
It depends on what you want to retrieve.
If you have this:
day 1 - day 2
If day 1 is initial, you'll have day 2 as the result of the difference which is correct. If in the other hand day1 is initial you'll have - day 2 as the result. So you just need the ABS() formula to give the absolute value of the difference.
What exaclty do you want to achieve? only do the formula when both day 1 and day 2 have values? Retrieve always a positive value of the formula no matter if day 1 is initial or day 2 or both?
Can you give a complete example with values of what's happening and what do you pretend to achieve?
Diogo.

Trans Code to check the Date of Termination in Setup Tables-Very Urgent!!

Hello BW Gurus,
I need to check the date of termination I have given while filling up the setup tables to verify when my delta loads would stop running. NPRT transaction code just gives me the time it took to fillup the tables but the date of termination is given as zero's, so please can someone let me know how to see that.
Thanks in advance,
Anjali
Message was edited by: Anjali

Hi,
If I understood it right, you wanted to predict when the actual date of termination would occur or you wanted to know what parameter you did input on the job that is now running?
Case 1:
As far as I know, that Info cannot exactly be determined since it will depend on various factors e.g. CPU speed, I.O. Speed, Amount of data to be process etc. etc. which I dont think SAP could predict as exact as possible (if ever an option was provided).
During the early stages of our project, we did that but we base the run time from history. Meaning, we always log (on top of existing SAP Job Logs) the run times in Excel and we somehow use that data to predict the actual Date of Termination.
Case 2:
In case you wanted to see the parameter while its running, I have no suggestion but for you to debug the currently running program.
In SM51, click the Active job and choose menu Program/Mode->Debugging. On the fields on the lower left portion, type RMCSNEUA-DATUM (got this value when you execute the Table Setup, say OLI9BW; Press F1 on the date of termination field) this would give you the actual date you have provided.
If I have helped, please grant points...
--Jkyle

My iphone 4s siri is not working, it just worked for a while and stopped. I've checked the data plan and it is intact, i even switched my sim to a friends phone and his siri worked but mine refused even with a wireless network. pls help.

My iphone 4s siri is not working, it just worked for a while and stopped. I've checked the data plan and it is intact, i even switched my sim to a friends phone and his siri worked but mine refused even with a wireless network. pls help.

Troubleshooting Siri
http://support.apple.com/kb/TS4079

How to give the Fiscal year period in RSA3 for checking the data.

Hi BW Experts, good morning.
We have loaded the data monthlywise with selection parameters as Fiscal Year Period(FISCPER).
While checking the data consistency in both R/3 and BI, the selection parameter which i have given is in the format of         001.2005
I got the records in BI side.
But if we give the same format In RSA3 in the Fiscal Year Period tab , we r getting 0 records.
So kindly help me how to enter the selection parameters for 1 month.
    Thanks
              Anjali

Hi sanyam ,
   Thanks for the help.
I got it now.
Thank you so much
Bye
               Regards
                     Anjali

How to check the data of an archived table.

I have archived a table created by me. I have executed the write program for the archiving object in SARA. Now how can check the data of my archived table.

Hello Vinod,
One thing to check in the customizing settings is your "Place File in Storage System" option. If you have selected the option to Store before deleting, the archive file will not be available for selection within the delete job until the store job has completed successfully.
As for where your archive file will be stored - there are a number of things to check. The archive write job will place the archive file in whatever filesystem you have set up within the /nFILE transaction. There is a logical file path (for example ARCHIVE_GLOBAL_PATH)where you "assign" the physical path (for example UNIX: /sapmnt/<SYSID>/archivefiles). The logical path is associated with a logical file name (for example ARCHIVE_DATA_FILE_WITH_ARCHIVE_LINK). This is the file name that is used within the customizing settings of the archive object.
Then, the file will be stored using the content repository you defined within the customizing settings as well. Depending on what you are using to store your files (IXOS, IBM Commonstore, SAP Content Server, that is where the file will be stored.
Hope this helps.
Regards,
Karin Tillotson

FM to check the date

Similar Messages

Maybe you are looking for