FM to find ranges of a particular field ina table

hi
is there any FM to find the ranges of a particular field in a standard table

Hi Senthil,
Try these function modules.
BALW_RANGES_CHECK
CMO_NUMBERRANGES_CHECK
ISU_DB_TE218_SELECT_RANGES
ISU_DB_T259_SELECT_RANGES
FBIW_SELECT_RANGES_FILL
FBW4_SELECT_RANGES_FILL
Hope it helps!
Much Regards,
Amuktha.

Similar Messages

Find length of a particular field.

Hi,
I am new in ABAP. So Please guide me how to find out the length of a particular field and also give the function name with example.
Ram Shanker

Hi RAM,
DESCRIBE FIELD
Syntax
DESCRIBE FIELD dobj
[TYPE typ [COMPONENTS com]]
[LENGTH ilen IN {BYTE|CHARACTER} MODE]
[DECIMALS dec]
[OUTPUT-LENGTH olen]
[HELP-ID hlp]
[EDIT MASK mask].
Effect
This statement determines several properties of the data object dobj and assigns them to the specified variables. The various additions enable you to determine the data type and the number of components for structures, the length used in the memory, the number of decimal places, the output length, the name of the data type for a reference to a data element of the ABAP Dictionary, and a possible conversion routine.
Notes
You can specify field symbols or formal parameters in procedures for dobj to determine the properties of the data object they represent at the time of the statement execution.
The statement DESCRIBE is used to determine the properties of data objects of elementary data types. When DESCRIBE is used for structures or data objects of deep data types like strings, internal tables, or reference variables, you can only determine elementary properties. Further details, for example, the static or dynamic type of a reference variable cannot be determined using DESCRIBE. For this kind of information, you can use the type classes of Run Time Type Services (RTTS). They enable you to determine all properties of data objects of all data types.

How to refer to a particular field in Table Control.

Hi,
How can we refer to a particular field in a table control like 5th row 6th column. The actual requirement of mine is, i have a column with listbox. For each row i need to have different values for the list box. So i need to refer to that particular field in the column and assign the list values. Please kindly help.
Regards,
Vinay.

hi,
TABLE CONTROL -
http://www.geekinterview.com/Interview-Questions/SAP-R-3
http://help.sap.com/saphelp_nw04/helpdata/en/9f/dbaa4735c111d1829f0000e829fbfe/content.htm
http://www.sapgenie.com/abap/example_code.htm
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
Eg of table Control:
http://members.aol.com/_ht_a/skarkada/sap/table_control/
table_control.htm
http://www.sapdesignguild.org/resources/MiniSG/3_Managing/3_Functions_Table_Control.htm
Table control in BDC
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/45/adee2396f711d1b46b0000e8a52bed/frameset.htm
Regards,
Laxmi

How to prvide f4 help for the particular field in table control

hi all,
my requirement is iam having one i/p field in screen 100.name of the field is sales order number. i just want to keep f4 help for this field only.when i click F4 on this field it has to show all the sales order numbers from vbak table.
anybody can send me the code please.
thanks,
maheedhar.t

Hi,
In POV Modlue u write
Filed (ur field name ) module get_values.
In that get_values module u declare an itab according to ur requirement and get the values into internal table using select query .After u get the values in select query u call a function popup_with_table_display in which u pass the itab along with the starting and postion , width and height of the popup window .Hope this will help u
Regards,
Shafi

How to make a particular field in table control invisible?

i have a field in my table control but im not able to make it invisible
im using the following code
PBO
LOOP AT itab_ctrl INTO wa2_ctrl WITH CONTROL ztabctrl
 CURSOR Ztabctrl-current_line.
 MODULE modify_scrn_100.
ENDLOOP.
module modify_scrn_100.
LOOP AT SCREEN.
 IF SCREEN-NAME = 'WA_CTRL-ZITEM'.
 SCREEN-INVISIBLE = 1.
 MODIFY SCREEN.
 ENDIF.
 ENDLOOP.
endmodule
...here WA_CTRL-ZITEM is my table control field name
...even if i make invisible = 1 or 0 the field is not getting invisible

Hi,
Check the Demo Program RSDEMO02.here you can have option to make the column invisible.
also check these..
How to Hide a entire column in a Table Control?
Hiding table control columns along with header
Hiding of Table control
Regards
Vijay

To Disble the Field in Table Control after clicking Save button

Hi,
I have a requirement as follows. i need to disable one field in the table control after clicking save button. i tried with SCREEN elements but it disabling whole the table control but i need to disable that particular one record only in the table control. i found Structure CXTAB_COLUMN in documentaion. it has the properties like invisible. can any body tell how can we disble that particular field in table control only for the one record. and how can we use CXTAB_COLUMN.
Thanks in advance.

hi,
do like this...
in USER_COMMAND_1000 module of PAI,
MODULE user_command_1000 INPUT.
CASE ok_code.
 WHEN 'BACK' OR 'UP' OR 'CANC'.
 LEAVE PROGRAM.
 WHEN 'SAVE'.
 fl = 1.
 GET CURSOR LINE lin.
ENDCASE.
ENDMODULE. " user_command_1000 INPUT
and make on module disable in Loop Endloop in PBO.
and write like this...
MODULE disable OUTPUT.
LOOP AT SCREEN.
 IF tab1-current_line = lin AND fl = 1.
 screen-input = 0.
 ELSEIF tab1-current_line < lin.
 screen-input = 0.
 ELSE.
 screen-input = 1.
 ENDIF.
 MODIFY SCREEN.
ENDLOOP.
ENDMODULE. " disable OUTPUT
here fl and lin both are type i.....
and there will b one module in PBO
MODULE tab1_change_tc_attr.
in that put if condition....
MODULE tab1_change_tc_attr OUTPUT.
IF sy-ucomm <> '' AND sy-ucomm <> 'SAVE'.
 DESCRIBE TABLE itab LINES tab1-lines.
ENDIF.
ENDMODULE. "TAB1_CHANGE_TC_ATTR OUTPUT
ur problem will solve...
reward if usefull....
Edited by: Dhwani shah on Jan 2, 2008 1:17 PM

How to find out the list of field exists for a particular transaction

Hi all,
Can u please help me find out the list of field exits available for a particular Tcode?
Is it similar to User exit or . . . . ?
Thanks,
C.Selvaraj
SAP-QM

Create a program and add this code to find user exit
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
    select single * from trdir where name = tstc-pgmna.
    if trdir-subc eq 'F'.
      select single * from tfdir where pname = tstc-pgmna.
      select single * from enlfdir where funcname =
      tfdir-funcname.
      select single * from tadir where pgmid = 'R3TR'
      and object = 'FUGR'
      and obj_name eq enlfdir-area.
      move : tadir-devclass to v_devclass.
    endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',                        "#EC NOTEXT
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
    write:/(95) sy-uline.
    format color col_heading intensified on.
    write:/1 sy-vline,
    2 'Exit Name',                                          "#EC NOTEXT
    21 sy-vline ,
    22 'Description',                                       "#EC NOTEXT
    95 sy-vline.
    write:/(95) sy-uline.
    loop at jtab.
      select single * from modsapt
      where sprsl = sy-langu and
      name = jtab-obj_name.
      format color col_normal intensified off.
      write:/1 sy-vline,
      2 jtab-obj_name hotspot on,
      21 sy-vline ,
      22 modsapt-modtext,
      95 sy-vline.
    endloop.
    write:/(95) sy-uline.
    describe table jtab.
    skip.
    format color col_total intensified on.
    write:/ 'No of Exits:' , sy-tfill.                      "#EC NOTEXT
else.
    format color col_negative intensified on.
    write:/(95) 'No User Exit exists'.                      "#EC NOTEXT
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.            "#EC NOTEXT
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Rewards if useful........................
Minal

Get the value of a particular field in a segment of an Idoc

Hi All,
I have a requirement where I need to write a report which will fetch the value of a particular field in a segment of an idoc.
I have the idoc number segment and field name as input parameters by which I can fetch Sdata from EDID4 but the confusion is how to find the exact field value from that Sdata. How to Map the SDATA to the segment structure.
Please advice...

Hi,
I have one last doubt that may be you people can help with... The user will be giving the segment name and field name as input. So by following Kesav's code while i can get all the values in the segment structure at runtime please suggest how to display any one field from that structure given that that particular field will come at runtime.
EX: user gives an idoc number 123 (say belonging to Orders basic type)
segment E1EDK01
field BELNR.
So i need to display the value of E1EDK01-BELNR of idoc number 123.
Please suggest how to achieve this....

How to find out the structure stored field value in a standard program

Hi Gurus,
Please suggest me how to find out the structure field stores the value in which table.
Exanple : i have a strutured field in T.code cj31 is BPDY-WERT1 and it is stotring value 10,000,000.00. know i need to find out in which table this value is storing .
Please suggest me its urgent.
Thanks in Adavance!!!
Points will be rewarded.......
Regards,
Kranthi

hi,
Go to transaction ST05,Click activate trace with filter,Give the transactio name as cj31,Go to the transaction and navigate to the place where the particular field is present, then again go to st05 ,Deactivate the trace and display the trace.
Now u can see how the data is fetched ,U can even go to display mode of the same transaction cj33
Thanks
San

How to attach search help in a particular field in se80 screen

Hi All,
Can any one tell me how to attach a search help in a particular field in a screen.
Wat search help is used to display material no and description
Thanks in Advance
Regards,
Priya

Hi Priya,
In the Screen Layout, Double click on the field on which you wish to attach the search help.
In the properties window you can specify the search help for that field.
Search help for Material No. is MAT1.
You can find it in the Table structure (SE11) , "Entry help/check" tab.
Regards,
Himanshu

Clear historical cache for particular field

Hi all,
I am working on a module pool program. There is one field to display the exployee number, let's say the field length is 8 char.
Everytime accessing into the screen, the employee number field should clear (clear from history) for the next new employee to enter the employee number.
The problem I am facing now is, the next employee can easily press on the SPACEBAR to select the employee number from the history (which is not agreed by my boss).
I also understand that there is a fastest way to handle this by increasing the field length to longer, let's say 60 char. Then it will not display out in list for them to select from history even they press on SPACEBAR.
In ABAP programming, how do I remove it from history for this particular field? Other fields are required to store in history for easier data entry.
Thanks in advance.

Hi,
For each user related information is stored in the local folder. You can get the latest cache file for that user from there. Below is the path to obtain the same.
C:\Documents and Settings\andy\SapWorkDir\SAP_Cache_andy
Here you will find a lot of files. They will contain the latest cache information.
Cache1 and Cache2. You need to manipulate these files to achieve the requirement.
Thanks,
Samantak.

Which all table contains a particular field

Hi
Can any one give me the query for finding which all tables in the database contains a particular field.
Like I want to find out all the tables which has fields with field name like '%LOC%'
Thank You
.S

select table_name from dba_tab_columns where column_name like '%LOC%'

How to find a view containing specified fields

Hello Guys,
I have got some fields of R/3 table based upon which i have to find View which has all the fields.
I know that we have to go to help.sap.com and search there, but where to go after that i am not sure.
Since i am new to BW , please guide me.
Regards,
Dolly

>
adlins wrote:
> Hi Dolly,
>
> Go to R3 system, and click on 'where-used' list for those particular fields,
> in that you will get list of objects which are using this field,
>
> please ask if u need more help.
>
> --adlin
I am sorry my question is i know field names from R3 for example bukrs etc. which i want to have in my report.
But i do not know in which view they all are present. I want the to know the perticular view'name to create my report.
from help.sap.com where to search for same?

How can we disable a particular field in BI,BCS Report in Portal

Hi Friends,
I have one doubt in Portal.
How can we disable a particular field in BI,BCS Report in Portal depending up on user.
For Exam: In Our Application can we divided in to 3 Categories. Managerial, Regional and Supervisor.
Manager having all authorizations. So here I donu2019t have any problem.
When Regional Manager logs in portal Depending up on that Regional Plant number will be in Disable mode.
EX: India Regional Manager logs in portal Plant number Files == IND123 Like in BI Report
       UK Regional Manager logs in portal Plant number Files == UK154   Like in BI Report
When Supervisor logs in portal Depending up on that Regional Plant number will be in Disable mode and also Company Code also in disable mode
EX: India Supervisor logs in portal Plant number Files == IND123 Like in BI Report and also Company code input file is ABC is in Disable mode
    In India Another Supervisor logs in portal
India Supervisor logs in portal Plant number Files == IND123 Like in BI Report and also Company code input file is ASD is in Disable mode
       UK Supervisor logs in portal Plant number Files == UK154   Like in BI Report and also Company code input file is XYZ is in Disable mode
This is my Req; How can we do there. Could you help me.
Give me these Ans:
1. Is it Feasible in portal.
2. Depending upon user we can disable particular filed in Portal.
3. Can we find out who is login in Portal. by Using BI System. in WDJ We can Find out Like IUSER Code Same as BI Developer also Find it. Is it Possible or not.
Regards
Vijay Kalluri

no

How to find Primary Key for a particular SAP Databse Table?

Hi Guys,
How to find Primary Key and foreign key for Particular SAP Databse table ?for Ex : EKKO , EKPO , EKKN , EKBE , EKBEH , EKET and EKETH.
Thanks,
Srinivas.

Use transaction SE11 to display the table. Put the cursor on the field you want to display the check table and click 'Foreign key' push button (a key with an bottom point arrow), then it will show the check table of the foreign of a field.
Or by just simple double click on the field, a pop-up window of all the attribute (including the foreign key and the check table if exists) will show too.
Please reward point for helpful answer.
Minami

FM to find ranges of a particular field ina table

Similar Messages

Maybe you are looking for