FM to maintain email id of contact person for a customer

Hi All,
I need to create a contact person for a customer master using a FM.
I am able to create a contact person and maintain his last name , first name and telephone using FM SD_CUSTOMER_MAINTAIN_ALL.But I am not able to maintain email id of contact person.Is there any separate FM for this purpose.If anyone has any info regarding this pls help me.
Regards,
Raghu.

Use these fm's in the following order
ADDR_PERS_COMP_COMM_GET
loop at <resultant_table>
<resultant_table>-updateflag = 'U'
<resultant_table>-smtp_addr = new email
  modify <resultant_table>.
endloop
ADDR_PERS_COMP_COMM_MAINTAIN
ADDR_MEMORY_SAVE
This works 100 %

Similar Messages

  • How can I maintain more than one contact person for a supplier

    Hi
    As per our business requirement , How can I maintain more than one contact person for a single supplier in SRM?
    How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier.
    we are in SRM 7, and currently we are creating contact person throug customised BDC.
    please advice.
    Thanks & Regards
    NITIN
    Edited by: nitinkk on Sep 9, 2011 10:22 AM

    Dear Yaniv,
    Thanks for your information,
    I am able to create  users But my problem is How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier ? Is there any kind of maping is available for the user/ contact person to the supplier no.??
    Thanks & Regard
    NITIN

  • Email address of contact person in Vendor Master

    Hi,
    I am trying to configure Contact person as a partner function. In P.O the user has to select the contact person at header level ,if there are multiple contatc persons in Vendor Master . Then in PO, the selected contact person name and email Id (which is mantained in conatct peson page of vendor master) has to be printed.
    In addition could please tell me the Table name of email ID of Contact person that is mantained in Vendor Maser?
    I tried with KNVK, ADr6 etc. but failed
    I would really appreciate your solution
    Thanks

    Hi,
    Vendor data should be in Central Address Management from 4.6c on...look at table ADRC with addressnumber from LFA1-ADRNR..
    Vendor Master report with address, telephone number & email ID
    Kuber

  • Tc = CIC0/ Maintain Business Tr/ field: Contact Person have to come auto

    Starting all over again. I am just starting as CRM junior.
    In client 100 works.
    I have the problem in client 200
    I log in SAP CRM with a specific user.
    At tcode = CIC0
    tab: Maintain Business Tr
    field: Contact Person (field: PARTNER_NUMBER/ structure: COMT_PARTNER_TO_DISPLAY).
    The field Contact Person has to be field automatically with the user log in.
    I do not know if this is a problem with:
    - Replication (from R/3 to CRM)
    or
    - This is a problem of CRM Configuration/Basic Functions/ Partner Process/etc
    Can you folks help me?
    Thanks in advance.
    Rgds,
    BB
    Message was edited by:
            Barbara Barbos

    solved

  • Creation of Contact Person for a vendor in SUS, MM SUS scenario

    Hi All,
      We are working on EBP for bidding with SRM 5.0 and ECC6.0 as the backend. When we do BBPGETVD for the vendor root we have to create a contact person for the vendor to logon.
    Our clients requirement is that all the data in the R/3 has to come to EBP including the telephone number and email addresses so that the vendor number should be created as the contact persons userid.
    Is there any way to achieve this?
    Best regards,
    Sridhar.

    Hi,
    Also you dont need to enter any roles while creating the Contact person for a vendor.You just need to enter the employee/user details who will be the contact person for the vendor and after you save all the data ,the CP for the vendor will be created and the system will issue a message "Contact person XXXX for BP yyyyy created".
    BR,
    Disha.
    Do reward points for  useful answers.

  • Contact Person for org unit

    Hello,
    ECS 5.0
    Trying to find a place to maintain contact persons for organisational units. Any ideas where that is done?
    rgds
    GAR

    Hi,
    You may try the transaction BUA1.
    Regards
    Mick

  • No POs found when entering with vendor role/contact person for vendor

    Dear colleagues,
    I wanted to post either a GR or an invoice as a vendor, that is, entering the system as the contact person of the vendor, with the vendor role, and searching for the POs created for me as vendor, then selecting one of them.
    However, when searching for POs to post the documents with reference to POs, the report says there are no POs available, when in fact I have created several POs for that vendor in the systems.
    What might I be missing? What are the conditions, rules, configuration steps needed so that the vendor can see the POs created for him and post subsequent documents with the role SAP_BBP_STAL_VENDOR and entering the system as a contact person for that vendor?
    Will award points for helpful answers. Thanks in advance
    David

    Hi David,
    This scenario which you require for receiving P.Os,sending P.O response, posting confirmation and invoice is called
    SUS (Supplier self service) scenario.
    You have to configure this scenario to avail all these services and the vendor should be SUS vendor. A mere vendor role will not allow the vendor to perform all these functions.
    XI (Exchange infrastructure) is required in configuring the SUS scenario.
    Hope this resolves your query.
    Award points for helpful answers.
    Rgds,
    Teja

  • Create contact person for a Vendor

    Hi experts
    Someone could explaim the processes of contact person creation.
    I replicated the vendor from R/3 and now I need to send a BId to this vendor but the sistem ask for a contact person, so I tried go to transaction Manage business  Partner - Employ to Business Partner and tried to create a contact person for this vendor, but when I try to choose a roles for this user no roles is found and is not possible create the user.
    Where can I insert the roles to found when creating the user?
    Thanks
    Nilson

    Hi,
    Also you dont need to enter any roles while creating the Contact person for a vendor.You just need to enter the employee/user details who will be the contact person for the vendor and after you save all the data ,the CP for the vendor will be created and the system will issue a message "Contact person XXXX for BP yyyyy created".
    BR,
    Disha.
    Do reward points for  useful answers.

  • Hoe to fetch Contact person for a vendor from BP no of the vendor?

    Hi all,
    Cna anyone tell me any FM  /table where i can find the contact person for a vendor once i pass the vendor business partner no ?

    check function module --> BUPA_CENTRAL_READ_DETAIL , BUPA_CENTRAL_GET_DETAIL
    and give partner number --> as input , once you run the same --> ES_DATA_PERSON , should have the contact person details..
    Edited by: khan voyalpad usman on Nov 1, 2008 12:13 PM

  • ELM 1:N Can we Map Multiple Contact Persons for an Org

    I want to upload Multiple contact persons for an organization.
    Using ELM Mapping tool can we map multiple contact persons for an organization?
    orgID  name  persID  Name   CP_FUNCTIONKEY    CP_FUNCTIONNAME
    9          abc     9          Pers1             01                            Head of CAD
                          9         Pers2             02                            Head of Civil
    Thanks,
    Ramesh

    I found the way the mapping file should be.
    Entry 1: Organisation A, Person A-1
    Entry 2: Organisation A, Person A-2
    Entry 3: Organisation B, Person B-1
    Entry 4: Organisation C, Person B-1
    During mapping, the content of the fields ORG_NAME1, ORG_NAME2, ORG_NAME3, ORG_CITY, ORG_POSTL_COD1, POSTL_COD2, and ORG_STREET are used by the system to determine identical organizations within the list. The content of these fields must be identical for all records that belong to one organization.
    Thanks,
    Ramesh

  • Bapi or FM to create,change and delete Contact persons for vendors

    Dear Experts,
    We are replicating the Contact persons details from SUS(SRM) to ECC, When a Contact person is create,changed or deleted the data should be replicated in ECC. We are doing custom development to do this, I need to know is there any function module or Bapi which I can use to create , change or delete the contacts persons for a vendor.
    I tried using BAPI_ADDRESSCONTPART_CHANGE, BAPI_ADDRESSORG_SAVEREPLICA for changing but its doesn't covers few fields like time zone etc. For deletion I tried  WY_KNVK_SINGLE_DEL_FROM_BUFFER its too not helping me .
    Please let me know is there any bapi or fm to do these process or we can go for BDC.
    Thanks & regards,
    Santhosh.R

    Hi Santosh,
    Can you please tell me what Business Scenario is asking you to consider the Time Zones .
    If you know the Customer Number you can very well get the country and there are various FM's to get the time zone based on a country .
    Now Call the FM (as wrote by you ) based on the TIme Zone condition,
    Please enlighten me if i am incorrect.
    Thanks
    Sri

  • Authomatic contact person for suppliers

    Hello to all,
    In an initial load, i will replicate 3000 vendor from R/3 to SRM, there is any way to create a contact person for all this vendors??? (for bid invitation i will need them)
    Thanks
    Nacho

    Hi Ignacio,
    How did you go about this?
    I have a similar requirement where for initial upload, the contact persons has to be created from a file upload.
    Can you please suggest something?
    BR,
    Sridhar

  • Changing Contact Person for Sold-to-party

    Hi Experts,
    i am having requirement like i have a order number and for that order number i have to add contact person for sold-to-party please can anybody help me..?

    You could do the following
    a) Extract the partner from CRM_ORDER_READ through the exporting parameter et_partner.(Check the exporting parameter)
    b) Manipulate the partner data you had extracted in step a)
    c) Pass the data to the importing parameter IT_PARTNER in the CRM_ORDER_MAINTAIN.
    I think this should work.
    Regards
    Kavindra

  • Contact person for Business

    Dear Skype team, we would like to know contact person for business purpose. we are interested to work together with skype .
    thank you

    Hi, Higumaisme, and welcome to the Community,
    Please see this:
    Using Skype in your business
    Transform the way your business works with cost effective and collaborative tools.
    Contact our solutions team
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Multiple contact persons for single vendor--LSMW

    Hi experts,
        i want to upload multiple contact persons for single vendor. using lsmw direct input method or recording method is it possible..if possible can u let me know the procedure.
    Thx in advance,
    Neelu

    Hi
    in our company v wil upload contact person details in Sales Data......
    so its not possible to upload more than one contact person for vendor....
    can u tell me wr u people wil enter the contact person details?
    Regards
    Smitha

Maybe you are looking for