FM to reach the accounting tab of mm03

Hi All,
Can any one please tell me a FM which will derectly take to the accounting tab1 of MM03 when a material is known.
I am workin on following:
Alv is displayed which contains material number. When user double clicks on material number he should be taken to the accounting tab 1 of MM03.
I need a FM which will derectly take to the accounting tab1 of MM03 .
Regards,
himanshu

Hi,
  There is no such facility to display the particular tab in the material display. So u can do one thing do a recording for transaction MM03, enter material details in the first screen and click on views button then select Accounting tab view, stop the recording. Using this recording fill BDCDATA table and using call transaction statment as shown below display the required tab....
CALL TRANSACTION 'MM03' USING i_bdcdata
MODE 'E'
Rgds,
Bujji

Similar Messages

  • FM- Accounting tab of MM03

    Hi All,
    Is there any Function Module to directly go to the accounting tab of MM03.
    If not what is the other way of doing this.
    Helpful Answers will be rewarded,
    Kushagra

    Hi,
       To select the views in M03 use FM MATERIAL_BTCI_SELECTION_NEW.
    CALL FUNCTION 'MATERIAL_BTCI_SELECTION_NEW'
                    EXPORTING
                      material                  = wa_mara-matnr                 "Material to which char.values are attached
                      materialart               = wa_mara-mtart                 "Material type
                      selection                 = ' '                           "Indicator for Accounting view Pass proper value
                      tcode                     = 'MM03'                        "Transaction code
                    TABLES
                      btci_d0070                = it_bdcdata1                   "Internal table from which position of
                    EXCEPTIONS
                      material_not_found        = 1
                      material_number_missing   = 2
                      material_type_missing     = 3
                      material_type_not_found   = 4
                      no_active_dynpro_selected = 5
                      no_authority              = 6
                      OTHERS                    = 7.
                  IF sy-subrc <> 0.
                    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
                  ENDIF.

  • Console 4.x is missing the ACCOUNT tab

    When I create or modify users or groups with Console, the ACCOUNT tab is
    missing.
    (See attachment)

    If you encounter problem with customizing toolbars then see:
    * http://kb.mozillazine.org/Corrupt_localstore.rdf

  • Modify/Customize the ACCOUNTS Tab

    I am trying to modify/customize the Accounts Tab in the Administrator Interface.
    There are 3 sub-tabs under the "Accounts" Tab : LIST USERS...........FIND USER.............LAUNCH BULK ACTIONS
    *(a) Firstly, I want to remove the LAUNCH BULK ACTIONS Tab completely*
    *(b) I want to modify the FIND USER Tab.* This Tab contains a list of options (all search criteria) for location a User. I want to remove ALL of them, except the very first one (which is a drop down menu for selecting Name, Firstname, LastName, or Fullname).
    *Name...............equal to/contains/like........................[ TEXT BOX ]*
    I want to retain only this search option.
    *(c) I would also like to add more fields/variables to that drop-down menu.* By default, the menu only lists Firstname, Lastname, Fullname. I would like to add other fields there too.
    Any help will be greatly appreciated.

    Thanks sec_tk
    couple of problems :
    (a) when adding attributes to the FIND USER drop-down menu (via the User Search Defaults Form), IDM does not allow me to remove that first default parameter  ("name").
    Everytime I load the page, it keeps searching for that very first parameter. When it doesnt find it, it gives me the following error :
    WARNING :  attribute does not match any of the allowed values for "Search Condition 1"
    How do I get rid of this?
    (b) the administrator I created does not have any rights besides Create and Edit User. No bulk rights/capabilities whatsoever. How do I remove that "Launch Bulk Actions" sub-tab?
    Thanks

  • Accidentally deleted my short name from the accounts tab. Now I go back and make changes.

    I'm running 10.6.8
    I was trying to change the terminal name from nicholas-shook's-macbook-pro:~ nicholasshook$ to something shorter. I started by changing my computer name via System Pref >> Sharing, and tried to change my shortname via System Pref >> Accounts. I deleted the shortname after right-clicking my name on the left panel thinking that it would get rid of it in the terminal.
    Now when I try to make changes to the Accounts tab it asks me to "type an administrator's name and password to allow System Preferences to make changes" instead of just asking for the password. I've tried nicholasshook and Nicholas Shook (what it shows up as when I come back to my computer after its been asleep).
    Please help me get back to the shortname so I can not make it empty.
    Thanks,

    That isn't working for me. The space is BLANK. No pins, no x's. Just blank. That's what I'm trying to restore.

  • Tried to connect my messages from my phone to my macbook, but the accounts tab under preferences won't let me type in my Apple ID and I can't save, cancel, or exit out of the window

    I just got a new MacBook Pro today. My friend explained to me how to connect my messaged from my phone to my Mac, since they weren't connected yet. I opened Messages > Preferences > Accounts. My Apple ID and account info was already there and it was enabled, but the messages still weren't syncing, so I disabled it and tried to add the account again. I went to put in my account info, but I realized there was no space to put in my Apple ID, even though it said to. I typed in my first and last name, password and country, but when I clicked "save" nothing happened. The section that asked my ID, name and password disappeared, the "save" button keeps flashing, and I can't "cancel" or exit out of the window. If I press "cancel", an alert message appears but all it says is "(null)". How can I fix this so that I can exit out of it? It won't let me shut down because of this.

    It will only sync with new messages received after Mac's Messages is configured and running.
    It will not synced old messages.

  • Revenues are not coming in the accounting tab page in cprojects

    Hi all,
    I am configuring the mulitilevel controlling on account assignment in cprojects with Project system. 
    I have given cost/revenue rate in customization along with revenue element.  The revenue element i categorised in the cost element category of "11".Then the cost element has assigned to controlling area and then to company code and then i replicated these values also.
    Apart from the above, is there any other setting i forgot? Please help me.
    Thanks

    Hi,
    (A) Which costing varianr you use
          PCO2 --> internal order
           PS06 --> Easy cost planning
    The costing variant controls how the costing is to be carried out. With it, you control:
    -->Whether the costing results are to be regarded as plan costs or actual costs
    -->Which prices are used to value the materials, internal activities and external activities
    -->How overhead surcharges are calculated
    (B)Define cost & revenue rates for the project role & enter the validity details. The start date and end of the validity dates should be within the organization and project dates ( IN C PROJECT )
    then go to make seeting in ERP
    C PROEJCT --> ACCOUNT INTEGRATION --> MAKE SETING IN ERP ( R/3 SYSTEM)
    (C) In CONTROLLING check the costing varaint
    (D)Settings for “Define Controlling Scenario
    (E)Assign Cost Elements and Activity Types
    Check this setting any thing is missing .
    and also check in Cproject Resoure tab page --> Costing  tab
    planned cost and Revenues
    CHECK AND REVERT BACK
    THANKS
    SUNIL JAWALKAR

  • How to make the Reference field in the in Accounting Tab a required field.

    Hi,
    Can i make the REference field in the Accounting tab required. I want to enter contract number from RE in that field.
    Thank you.
    Rachelle

    Hi,
    Goto t.code OVA2 select A-sales header and then click on procedures in the left--> select the procedure in which you want to incolude this field and new entries the table name is VBAK and field is XBLNR for the reference field in the accouting tab and accordingly assign the status 01 or 02 as per your requirement.
    Then you need to assign the incompletion procedure to the sales document type in VOV8.
    Regards,
    Gopal.

  • MISSING ACCOUNTING TABS IN THE ITEM MASTER

    I did an LSMW for new items for different plants that we have.  When I check the item in the item master I find the accounting tabs missing.  There are approximately 630 items that need to be fixed.  Does anyone know how to add the accounting tabs to a large group of items.  I tried MASS t-code and it didn't work.

    Hi,
    for the 630 items missing accounting compose an LSMW again with the required legacy file(data upload) information using MM01 transaction.
    This should add the accounting views for the required materials.
    regards
    sadhu kishore

  • When I choose a photo to share on face book a drop down box appears with the message, Face book didn't recognise the information you entered for the account this is my Face book login information I use to access my face book page how can I overcome the b

    when I choose a photo to share on face book a drop down box appears with the message, Face book didn't recognise the information you entered for the account this is my Face book login information I use to access my face book page how can I overcome this.

    Delete abd re-enter your Facebook account information jnder the accounts tab in the iPhoto preferences
    You may also want to take a look at the user tip for Facebook problems
    LN

  • Order number in Accounting tab

    Hello Experts,
    I have found that one field name "Order Number" is under the Accounting Tab of SO and A/R Invoice.
    Can you please tell me whats the usage of this field and whats the effect comes in sap due to this.
    Im using sap b1 2005, pl 25.
    Regards,

    Hi Chintesh,
    This is what the help file says about the order number field.
    Country-Specific Fields, Israel
    Field
    Description/Activity
    Order Number
    Enter an order number of the chain when you use the direct distribution method. This number is recorded in the file that you send to a head office of the chain store.
    Thanks,
    Joseph

  • Controlling Cockpit (COCPCPR) link in Accounting tab (cProjects)

    Hi,
    How can I have the controlling cockpit (COCPCPR) link to appear in the accounting tab?
    I have been able to configure the services for other object links. However, we also want the cocpcpr link to appear under the "Accounting" tab so that a user can use this link to correct cockpit errors, if any, instead of logging in to the R3 system to correct them.
    Please advise.

    Hi Nk, thanks for responding.
    We are on PPM5.0, and have accounting intergration for automatic replication to PS.
    The replication works. However, we have the need to visit COCPCPR at times to remove warnings/errors.
    I have seen COCPCPR link appear under the cProjects Accounting tab earlier (in some other implementation).
    However, I don't see any such link/button in my implementation. We have implemented the object link services by which we are able to get to the object in R3 (in another system). However, the COCPCPR link does not appear under the Accouting tab.
    We have PPM and PS on different systems.
    Thanks.

  • Display Costs on Accounting Tab in Company Code (object / Project) curerncy

    Hello Forum Experts,
    We have this major issue whereas teh costs on the Accounting Tab are shown in Controlling Area Currency.
    It seems this is the standard cProjects behaviour.
    What changes / enhancement do we have to implement to ensure that the costs are shown in company Code Currency.
    For example: Controlling Area Currency is USD.
    There is a branch of teh company operating in Gemany - it has its own company Code. So they create projects in Germany and would expect to plan and see teh costs in cProjects in Euros instead of USD's.
    How can we solev this problem. It is quite amjor and most probably the foreign comapies will not use the system as it amkes no sense to them to plan / see costs in another cuurency than their own...
    Thank you,
    LT

    Hi LT,
    The costing in cProjects is always carried out in Controlling Area currency.
    Make modifications in the following Class to display the costing in cProjects in Company Code Currency  :
    1) Class: CL_GUI_EASY_COST_PLANNING
    Method: CONSTRUCTOR
    Here set Object currency "1" as Default .
    2) Class CL_R3_OLR3_INTERNAL_ORDER
    Method GET_REPORTING_DATA
    Regards
    Sejo

  • Hide Accounting Tab in CProjects

    Hi All,
    I want to hide the "Accounting" Tab in CProjects, depending on user authorizations.
    I tried to realize it with BADI "DPR_DETAIL_TAB_CTRL".
    Unfortunately in this BADI I can only hide tabs on detail level e.g.
    tabs for tasks, phase etc.
    But how can I hide tabs on a higher level like the "Accounting" Tab?
    Thanks in advance.

    Hi Hans ,
    You can try with the Badi DPR_DETAIL_TAB_CONTROL, it can hide the Tab dynmically.
    See the example codes for details:
    Sets a detail tab Private (invisible) or Changeable (visible)
    Do not use Mandatory or ReadOnly
    Example: Set Document Tab invisible (Private) for Project
      CASE cs_property-association.
        WHEN cl_dpr_api_co=>sc_association_documents.
          CASE lv_object_type.
            WHEN cl_dpr_co=>sc_ot_project.
              cs_property-property = cl_dpr_fc_property=>sc_private. "Private: No 
    Kind regards,
    Zhenbo

  • Show accounting tab in CTR

    Hi experts,
    I have a requirement in which I need to display the accounting tab in CTR. By default this tab is hidden.
    I don't know if I can display it by customizing.
    I'm trying to enchance the webdynpro in order to display this tab, but no luck...
    In the component /SAPSRM/WDC_DOFC_CTR_I_D1 I can see the visible property of tab D_I_PS_GM_ACC has a binding with the attribute PS_GM_ACC_VISIBLE in the context. But this attribute is created in other enhancement point so I can't access to it within my enhancement point.
    I've tried it with the following code but there is a syntax error, (The type "element_context-ps_gm_acc_visible" is unknown,)
    DATA: lo_el_context TYPE REF TO if_wd_context_element,
              ls_context TYPE wd_this->element_context,
              lv_zz_visible_acc TYPE wd_this->element_context-ps_gm_acc_visible.
        lo_el_context = wd_context->get_element( ).
        lv_zz_visible_acc = 'X'.
        lo_el_context->set_attribute(
          name =  `PS_GM_ACC_VISIBLE`
          value = lv_zz_visible_acc ).
    I've also tried to create a new attribute in order to modify the binding but it seems that the tab is not instanciated in the tabstrib;
        DATA: lo_ui_tab_st TYPE REF TO cl_wd_tabstrip,
              lo_tab_acc   TYPE REF TO cl_wd_tab.
        lo_ui_tab_st ?= view->get_element( 'ITEM_TABSTRIP' ).
        CALL METHOD lo_ui_tab_st->get_tab
          EXPORTING
            id      = 'D_I_PS_GM_ACC'
          RECEIVING
            the_tab = lo_tab_acc.
        IF lo_tab_acc IS NOT INITIAL.
          CALL METHOD lo_tab_acc->bind_visible
            EXPORTING
              path = 'ZZ_VISUALIZACION.VISIBLE'.
        ENDIF.
    lo_tab_acc is always NULL, I've debugged the code and I can see within LO_UI_TAB_ST there is an attribute called CH_TABS that have all the tabs, but there isn't the accounting tab.
    Do you know if is possible to do it?
    Thanks in advance.
    Regards,
    Ricardo.

    I can't find the solution for this...
    Do you know if I can use the view V_DO_ACCOUNT_DETAIL of component /SAPSRM/WDC_UI_DO_ACC within the component /SAPSRM/WDC_DOFC_CTR_I_D1 ?
    I've been thinking in create a new custom tab and embed that view, but I don't know how to instanciate it in main component...
    Do you know how?
    Thanks in advance.

Maybe you are looking for