FM to read Database table
Hi,
Is there any FM to read values from database table. I can do it by writing select query but I want to do it through an FM .
Please help me.
Thanks,
Sravanthi
>
Sravanthi Palepu wrote:
> Is there any FM to read values from database table. I can do it by writing select query but I want to do it through an FM .
Why do you want to do so? Is it like you hate SELECT statements?
@Mahesh: Is it easy(& also performance efficient) to write a SELECT stmt or use RFC_GET_TABLE_ENTRIES(where you have no filter to select data) to select data ?
Suhas
Similar Messages
-
Reg. reading database tables.
Hi,
I have stored some database table names in a custom table. In my custom report, I have to read those database tables depending on certain criteria.
For ex: I have the table names 'MARA' , 'MARC' stored in my custom table ztables.
In my report, if a flag is set to 'X', I have to read MARA otherwise MARC...(these entries in ztables can change in future..so i can not read directly from MARA or MARC)..How to achieve this? Once the table names are stored in a variable, how to read data from this table name? if i say 'read' it will try to read this variable and not the table.
Thanks in advance for your input.you can try this approach
data : ref_table_des type ref to cl_abap_structdescr.
data:tabname like dd02l-tabname.
data : idetails type abap_compdescr_tab,
xdetails type abap_compdescr,
xfc type lvc_s_fcat,
ifc type lvc_t_fcat.
data: dy_table type ref to data,
dy_line type ref to data,
field-symbols: <dyn_table> type standard table,
<dyn_wa>.
ref_table_des ?=
cl_abap_typedescr=>describe_by_name( tabname ).
idetails[] = ref_table_des->components[].
loop at idetails into xdetails.
clear xfc.
xfc-fieldname = xdetails-name .
xfc-datatype = xdetails-type_kind.
xfc-inttype = xdetails-type_kind.
xfc-intlen = xdetails-length.
xfc-decimals = xdetails-decimals.
append xfc to ifc.
endloop.
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = ifc
importing
ep_table = dy_table.
assign dy_table->* to <dyn_table>.
create data dy_line like line of <dyn_table>.
assign dy_line->* to <dyn_wa>.
select *
into table <dyn_table>
from (tabname).
where variable tabname stores the name of the table stored in your custom table. -
Help needed in reading text file to database table
Hello experts,
i have to insert the values from the column of this text file and insert them in my database table.
I have done a few file to table insertions but i'm having some trouble with this one.
Any suggestions plz
thanks
liab_report 1.00 Page: 1
CDC:00537 / Mon Jun-21-2010 LIABILITY REPORT Mon Jun-21-2010 22:06:26
DRAW 1; SET 1; November 7, 2009
TOTAL PAID ON TOTAL EXPIRED ON TOTAL FRAC OUTSTANDING
WINNERS 06/21/10 PAID 06/21/10 EXPIRED ROUND
DIVISION AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT
Div1 0.00 0.00 0.00 0.00 0.00 0.00 0.00
Div2 701040.00 0.00 660146.00 0.00 40894.00 0.00 0.00
Div3 1444128.00 0.00 1330056.00 0.00 114072.00 0.00 0.00
Div4 4711900.00 0.00 3889700.00 0.00 822200.00 0.00 0.00
6857068.00 0.00 5879902.00 0.00 977166.00 0.00 0.00
DRAW 2; SET 1; November 14, 2009
TOTAL PAID ON TOTAL EXPIRED ON TOTAL FRAC OUTSTANDING
WINNERS 06/21/10 PAID 06/21/10 EXPIRED ROUND
DIVISION AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT
Div1 0.00 0.00 0.00 0.00 0.00 0.00 0.00
Div2 817817.00 0.00 817817.00 0.00 0.00 0.00 0.00
Div3 1687405.00 0.00 1611742.00 0.00 75663.00 0.00 0.00
Div4 3402100.00 0.00 3034200.00 0.00 367900.00 0.00 0.00
5907322.00 0.00 5463759.00 0.00 443563.00 0.00 0.00
DRAW 3; SET 1; November 21, 2009
TOTAL PAID ON TOTAL EXPIRED ON TOTAL FRAC OUTSTANDING
WINNERS 06/21/10 PAID 06/21/10 EXPIRED ROUND
DIVISION AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT
Div1 0.00 0.00 0.00 0.00 0.00 0.00 0.00
Div2 779933.00 0.00 769804.00 0.00 10129.00 0.00 0.00
Div3 1605548.00 0.00 1525104.00 0.00 80444.00 0.00 0.00
Div4 4891700.00 0.00 4256800.00 0.00 634000.00 0.00 900.00
7277181.00 0.00 6551708.00 0.00 724573.00 0.00 900.00Plz clarify whether u want to load text file as a file into database or value of this text file into database. If values are to be loaded from this text file, U can better format the text file and use SQL loader to load the file into database. By formatting the database, i mean remove the unnecessary headings and characters, kee only the values to be loaded idelimited by ' '(space) or ','(comma). Create a control file and load it into the target table.
-
Values not read from database table.
Hi experts,
I have an issue reading values from the database table. In my custom table I have a KUNAG field. The Sold-to partyis a 10 character field. I have saved a record with KUNAG = '0000694012'.
But when i read the values in a program using KUNAG= '0000694012' no records are read. Kindly help
Regards,
GirishHi,
This field has conversion exit.
Pass the appropriate value after converting.
Regards,
Srini. -
Dynamic reading from database table
Hi Experts,
While reading from a database table the below statement for deletion works:
DELETE (p_table) FROM <fs_wadbtab>.
p_table: name of database table which is entered as a selection screen parameter
<fs_wadbtab> : workarea of line type P_table
However, the below statement does not work:
READ (p_table) FROM <fs_wadbtab>.
My requirement is to read a record from p_table with contents in a dynamic structure.
Kindly suggest.
Thanks.Just misunderstood you.
Edited by: Karri Kemppi on Jun 23, 2010 10:00 AM -
Oracle DB: How to read data from a corrupted database table.
Hi All,
Wanted to know if there is a way I could read data from a corrupted Oracle database table?
Are there any tools that I can use? Or does Oracle provides any mechanism to do that?
Any pointers in this regard would be helpful.
Thanks in Advance.user10600611 wrote:
Table shows inconsistent data.You are going to have to be more specific. Inconsistent in what sense? A correct data model should not allow for inconsistencies to crop up.
However, you may be able to use one of the many FLASHBACK features of Oracle to look at the table at a prior point in time before the corruption.
HTH! -
Reading infotype 2050 ( No database table )
Hi to all experts,
I have a requirement to display the details exactly as in infotype 2050. When you check 2050 how it is displayed the annual calender i need to display exactly as it is .I tried using LDB, Macro, FM but the database table for 2050 doesnt exist.The p2050 is there but there is no pa2050. There is no underlying database table for that infotype 2050 (annual calender display).
I check some related fm
like module HR_PERSONAL_WORK_SCHEDULE
any information regarding this will be greatly appreciated.
THanksActually this information is retrieved based on the data of Planned Working Time, Infotype (0007) and Absences, Attendances and Substitutions (2001, 2002, 2003), there's no specific Infotype DB Table.
You were using the Correct FM to read the Employee's work schedule (Relevant data is retrieved in PERWS parameter)
CALL FUNCTION 'HR_PERSONAL_WORK_SCHEDULE' "XOQK064687
EXPORTING "XOQK064687
PERNR = PSPAR-PERNR "XOQK064687
BEGDA = FIA_BEGDA "XOQK064687
ENDDA = FIA_ENDDA "XOQK064687
SWITCH_ACTIV = 1 "XOQK064687
READ_CLUSTER = READ_CLUSTER "YMMAHRK037395
TABLES "XOQK064687
I0000 = M0000 "XOQK064687
I0001 = M0001 "XOQK064687
I0002 = M0002 "XOQK064687
I0007 = M0007 "XOQK064687
I2001 = M2001 "XOQK064687
I2002 = M2002 "XOQK064687
I2003 = M2003 "XOQK064687
PERWS = PSP2050 "XOQK064687
EXCEPTIONS "XOQK064687
ERROR_OCCURED = 1 "XOQK064687
ABORT_OCCURED = 2 "XOQK064687
OTHERS = 3. "XOQK064687
If you need to do something similar you'll have to check the IT2050 code -
Read the last record in the database table..
Hi..
I am new to ABAP. So i have one condition to read the address number field in the last record from database table by using the person number where clause field.
But the person number is same for some the records.
So can any tell me the logic for to read the addressnumber field in the last record of selected records from database where personnumber is equal to some thing.
Please help me..
Thanks
venkiHi Venkat ,
u mean to say
person number addressnumber
aa1 0000000000001
aa1 0000000000002
aa1 0000000000003
aa1 0000000000004
aa2 0000000000021
aa3 0000000000110
if i have to read the addressnumber 00000000000004
of the person number aa1
u can go like
data v_address number like addressnumber.
sort itab by personnumber addressnumber
loop at itab .
at end of personnumber.
move addressnumber to v_addressnumber ..
endat.
endloop.
so using control break statements i can fetch the last record of my person number if at all the same person number is having more than one address number ..
hope this helps,
Regards,
Vijay
Message was edited by: Vijay -
Read database-writeExcel-readExcel-Write database table
package datamigration;
import java.sql.*;
import java.io.*;
import java.io.IOException;
import jxl.*;
import jxl.Workbook;
import jxl.write.Label;
import jxl.write.WritableSheet;
import jxl.write.WritableWorkbook;
import jxl.write.WriteException;
import jxl.read.biff.BiffException;
public class NewExcel {
//In the following method we will be reading the Table from the Database and write it in an Excel File
public void getDataAndWrite() throws ClassNotFoundException, SQLException, WriteException, IOException {
Connection conn = null; //Manages connection
Statement stmt = null; //Query statement
ResultSet rs = null;
final String driver = "oracle.jdbc.driver.OracleDriver";
final String url = "jdbc:oracle:thin:@inbgewdrnd90hfm:1521:VISUAL"; //This URL will be specific to your Database
WritableWorkbook workbook = null;
workbook = Workbook.createWorkbook(new File("C:\\NewExcel2.xls")); //Again the name of file and its location will be your own
Class.forName(driver);
conn = DriverManager.getConnection(url, "visual", "visual");
stmt = conn.createStatement();
System.out.println("Executing query...");
rs = stmt.executeQuery("select * FROM TRANSACTION"); //the query is selecting everything from TRANSACTION table
WritableSheet sheet = workbook.createSheet("first sheet", 0);
Label FULLTEXT = new Label(0, 0, "FULLNAME");
sheet.addCell(FULLTEXT);
if (rs != null) {
int i = 0;
while (rs.next()) {
i++; //the counter
Label NAMEFULL = new Label(0, i, rs.getString(1)); //getting the values from the Table and appending them in TEXTFULL column
sheet.addCell(TEXTFULL); //adding column to Sheet
workbook.write();
workbook.close();
//Reading the Excel file
public void read(String inputFile) throws IOException, BiffException, ClassNotFoundException, SQLException {
Connection conn = null; //Manages connection
Statement stmt = null; //Query statement
ResultSet rs = null;
final String driver = "oracle.jdbc.driver.OracleDriver";
final String url = "jdbc:oracle:thin:@INBGEWDRND90Hgf:1521:wsa";
Class.forName(driver);
conn = DriverManager.getConnection(url, "corpus", "corpus");
stmt = conn.createStatement();
File inputWorkbook = new File(inputFile);
Workbook w;
w = Workbook.getWorkbook(inputWorkbook);
if (Workbook.getWorkbook(inputWorkbook) != null) {
System.out.println("Got the workbook" + "\n");
} else {
System.out.println("No workbook to print");
//Get the first sheet from the input file which is set earlier
Sheet sheet = w.getSheet(0);
//Set the for loop for reading the rows
for (int i = 0; i < sheet.getRows(); i++) {
String verbatim = sheet.getCell(0, i).getContents();
verbatim = verbatim.replaceAll("'", "''"); //"'" was causing an error so it was handled through"'"
verbatim = verbatim.replaceAll("&", "\\&");
String query = "insert into TRANSACTION (FULLNAME) values ('" + verbatim + "' )";
System.out.println(query);
stmt.executeUpdate(query);
public static void main(String[] args) throws ClassNotFoundException, WriteException, SQLException, IOException, BiffException {
NewExcel migratedata = new NewExcel();
migratedata.getDataAndWrite();
migratedata.read("C:\\NewExcel2.xls");
}1.) Please make sure that your code is readable (use the CODE button)
2.) What is your question?
3.) Please read [How To Ask Questions The Smart Way|http://www.catb.org/~esr/faqs/smart-questions.html] -
Using the Borland Database Engine to read AND write SHARED Paradox Database Tables
I need to read and write Paradox database tables with a C# AT THE SAME TIME AS people using the Paradox tables with legacy Paradox programs interactively.
I think the only way to do that reliably without corrupting the tables is to use the BDE Borland Database Engine.
Does anyone know how to do that? I found this c++ program... But I don't know how to integrate this into c#
http://www.codeproject.com/KB/database/bdedatabase.aspx
Is there another way to do this? Again, most important, I don't want to corrupt the paradox database.
I can read the paradox records all day long, that is no problem, it is updating at the same time as the legacy program users..
I also know that the whole thing needs to be updated, but that can not be done overnight.
Thanks in advance
DaveBeing pretty new to programming, I am trying just to read info from Paradox tables with C#. Info is actively being updated from another program at the same time. The program I am trying to write only needs to read data. The other program does use the BDE,
so it is already present running on the computer.
I've been looking at code but just haven't found quite the right combination.
Thanks. Any help is greatly appreciated. -
Reg:How to delete the column in table control also from database table.
Hi Experts,
Once again thank u all for giving the responses.
one more doubt is how to delete the columns of table control and also the record shold delete from ztable.
With Regards,
Saroja.P.Hi,
If you want to delete the rows in the table control and simultaneously delete it from the database table, then you can implement a 'DELETE' functionality specific to your table control. Have a MARK field (you will find that in the screen attributes of the table control -> give a name for the MARK field, you will find an additional MARK column at the beginning of your table control). You can check whatever rows you want to delete from the table control, call the delete module.
"This portion of code inside the LOOP...ENDLOOP.
IF sy-ucomm eq 'F_DELETE'.
gt_itab2-check = mark. " Store the MARK field status into your internal table's correspoding field 'check'
MODIFY gt_itab INDEX tabcontrol-current_line.
ENDIF.
iF sy-ucomm eq 'DELETE1'.
DELETE gt_itab WHERE check eq 'X'. "Your internal table does not have rows that you want to delete
ENDIF.
Now you can modify your database table using the MODIFY statement.
MODIFY ZDB FROM TABLE gt_itab. -
Database Table cannot be found when Verify Database
Post Author: brentlaw
CA Forum: Other
I have been using CRW 7 for many years. I recently upgraded to XI (I have current version). I can open existing reports and create new reports fine. The problem is when I Verify Database I get an error message "The Database table <tablename here> cannot be found. Remove this table from the report".
This happens to all existing and new created reports. The data fills correctly when previewing. The problem only occurs when Verifying Database.
I thought it might be an ODBC driver problem so I upgraded my driver to v 3.525.1117. At least I think I upgraded it I did not check the version before I installed SQL 2005 SP2. After installing SP2 it seemed to be fine but a week later the problem came back. Mysterious eh?
I am trying to launch a report from VB6 using RDC and rpt file. I get logged in correctly but at .viewreport I get a generic error message. I am assuming the problem is related the the issue I raise in this forum post.Post Author: brentlaw
CA Forum: Other
I fixed the problem. In CR XI Developer Designer window I opened up Database-SetDataSourceLocation. I noticed that in "Properties" the last item "Use DSN Default Properties": was set to True. I changed this value to False. Now this problem is solved.
I am Not using Windows Authentication I am using SQLServer authentication. In my code I was passing SQLServer Authentication credentials.
I opened up all of my CR 7 reports in CR XI and changed this setting on both the Main and the Subreort property in the SetDataSourceLocation dialog box and now all my reports work. I am a happy camper.
I don't know if this is a CR 7 conversion to CR XI only situation or not. Hope this information helps someone else. -
Hello experts, Need your Help...
I am trying to update database table using Update command. And I am doing COMMIT WORK AND WAIT. after the successful update.
But my code sometimes does not work and the table is not updated.
Sometimes the code works and sometimes not.. for the same data.
Can anybody think of any possible reason?
Thanks in advance,
--KumailHello Guys,
Here is the code, here we have all the keys... as it updates correctly sometimes. But doesnt update sometimes... for same data...... I have added COMMITT and WAIT statements to solve this problem.... but no luck....
UPDATE zfxx_bsr_data
SET zfxxstatus_glr = zfxx_bsr_data-zfxxstatus_glr
zfxxstatus_issue = zfxx_bsr_data-zfxxstatus_issue
zfxxerdat_glr = sy-datum
zfxxuser_glr = sy-uname
zfxxremark_glr = zfxx_bsr_data-zfxxremark_glr
zfxxertime_glr = sy-uzeit
doc_ind = w_doc_ind
zfxx_attach_acc = w_zfxx_att_acc
WHERE bukrs EQ t001-bukrs
AND saknr EQ zfxx_bsr_data-saknr
AND zfxxperiod EQ zfxx_bsr_data-zfxxperiod
AND zfxxfield EQ c_ba
AND zfxxfieldval EQ tgsb-gsber.
IF sy-subrc EQ 0.
WAIT UP TO 3 SECONDS.
COMMIT WORK.
WAIT UP TO 3 SECONDS.
ENDIF. -
Can't drop database table objects on a EJB Diagram.
JDeveloper 10.1.3 EA.
When I drop a database table object on a EJB Diagram the error below occurs. Also dropping components from the Component Palette doesn't work. A wizard opens, but after completing that, nothing is on the EJB Diagram.
However, after dropping a table and a restart of JDeveloper, there is an empty 'tablename EJB' on the EJB Diagram, but a click with the mouse on it generates the same error as the drop did.
Simular errors occur with JDeveloper 10.1.2, so writing this I realize that this might be a database version problem. I'm using 9i! I'll try 10g and see what happens.
Message
BME-99003: An error occurred, so processing could not continue.
Cause
The application has tried to de-reference an invalid pointer. This exception should have been dealt with programmatically. The current activity may fail and the system may have been left in an unstable state. The following is a stack trace.
java.lang.NullPointerException
at oracle.jdevimpl.xml.DescriptorNode.getWhitespaceHandler(DescriptorNode.java:349)
at oracle.jdevimpl.xml.DescriptorNodeDomIO.load(DescriptorNodeDomIO.java:164)
at oracle.jdeveloper.xml.BindingIO.load(BindingIO.java:43)
at oracle.jdevimpl.xml.DescriptorNode.getNewDescriptorImpl(DescriptorNode.java:506)
at oracle.jdevimpl.xml.DescriptorNode.getDescriptor(DescriptorNode.java:140)
at oracle.jdeveloper.xml.oc4j.ejb.OrionEjbJarNode.getOrionEjbJar(OrionEjbJarNode.java:145)
at oracle.jdeveloper.ejb.BaseEjbModuleContainer.getOrionEjbJar(BaseEjbModuleContainer.java:476)
at oracle.jdeveloper.ejb.modeler.diagram.dropHandler.TableDropEJB21Handler.isAvailable(Unknown Source)
at oracle.bm.diagrammer.ui.DropChooserPanel.populateOptions(Unknown Source)
at oracle.bm.diagrammer.ui.DropChooserPanel.createComponents(Unknown Source)
at oracle.bm.diagrammer.ui.DropChooserPanel.<init>(Unknown Source)
at oracle.bm.diagrammer.dropHandler.AbstractChooserDropHandler.createPanel(Unknown Source)
at oracle.bm.diagrammer.dropHandler.AbstractChooserDropHandler.processObjects(Unknown Source)
at oracle.bm.addinUtil.IDEAppContext$4.performAction(Unknown Source)
at oracle.bm.diagrammer.LockMonitor.performLockedAction(Unknown Source)
at oracle.bm.diagrammer.BaseDiagram.performDiagramLockedAction(Unknown Source)
at oracle.bm.addinUtil.IDEAppContext.dropNavigatorNodeLater(Unknown Source)
at oracle.bm.addinUtil.IDEAppContext$5.run(Unknown Source)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Action
If further errors occur, you should restart the application.
Also, report the problem on the JDeveloper forum on otn.oracle.com, or contact Oracle support, giving the information from this message.
________________________________________________________________________________Hi lisa, you've said that the problem does not occur in the 10.1.3 build but I have almost the same problem with the BME-99003 error message.
I used the same workaround "changing the regional settings from BE to US" and the BME-99003 problem disappears :-)
Here is the error message that I receive while I add a table into the EJBDiagram. I'm using
windows XP SP2
ADF Business Components 10.1.3.34.12
Java Platform 1.5.0_04
Oracle IDE 10.1.3.34.12
Struts Modeler Version 10.1.3.34.12
UML Modelers Version 10.1.3.34.12
Versioning Support 10.1.3.34.12
Abdelkrim BOUJRAF
Message
BME-99003: An error occurred, so processing could not continue.
Cause
The application has tried to de-reference an invalid pointer. This exception should have been dealt with programmatically. The current activity may fail and the system may have been left in an unstable state. The following is a stack trace.
java.lang.NullPointerException
at oracle.jdevimpl.xml.DescriptorNode.getWhitespaceHandler(DescriptorNode.java:349)
at oracle.jdevimpl.xml.DescriptorNodeDomIO.load(DescriptorNodeDomIO.java:164)
at oracle.jdeveloper.xml.BindingIO.load(BindingIO.java:43)
at oracle.jdevimpl.xml.DescriptorNode.getNewDescriptorImpl(DescriptorNode.java:506)
at oracle.jdevimpl.xml.DescriptorNode.getDescriptor(DescriptorNode.java:140)
at oracle.jdeveloper.xml.oc4j.ejb.OrionEjbJarNode.getOrionEjbJar(OrionEjbJarNode.java:145)
at oracle.jdeveloper.xml.oc4j.ejb.OrionEjbJarHelper.findOrionEjbJar(OrionEjbJarHelper.java:82)
at oracle.jdeveloper.xml.oc4j.ejb.OrionEjbJarHelper.findOrCreateOrionEjbJar(OrionEjbJarHelper.java:73)
at oracle.jdeveloper.ejb.modeler.diagram.dropHandler.TableDropEJBCommonHandler.processTableNodes(Unknown Source)
at oracle.jdeveloper.ejb.modeler.diagram.dropHandler.TableDropEJB21Handler.processTableNodes(Unknown Source)
at oracle.bm.typemodel.dropHandler.TableDropSubHandler.processDBObjectNodes(Unknown Source)
at oracle.bm.typemodel.dropHandler.DBObjectDropSubHandler.processObjects(Unknown Source)
at oracle.bm.diagrammer.dropHandler.AbstractChooserDropHandler.processObjectsImpl(Unknown Source)
at oracle.bm.diagrammer.dropHandler.AbstractChooserDropHandler.processObjects(Unknown Source)
at oracle.bm.addinUtil.IDEAppContext$4.performAction(Unknown Source)
at oracle.bm.diagrammer.LockMonitor.performLockedAction(Unknown Source)
at oracle.bm.diagrammer.BaseDiagram.performDiagramLockedAction(Unknown Source)
at oracle.bm.addinUtil.IDEAppContext.dropNavigatorNodeLater(Unknown Source)
at oracle.bm.addinUtil.IDEAppContext$5.run(Unknown Source)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Action
If further errors occur, you should restart the application.
Also, report the problem on the JDeveloper forum on otn.oracle.com, or contact Oracle support, giving the information from this message. -
Database table entries not getting viewed on SAP Screen
Hi
I have created Z-Code to update a standard SAP table. After executing my program I can see my desired entries in that SAP database table but when I am trying to view that same entries in SPRO I am not able to view it there.
Am I missing something? Even if my entries are coming in SAP database table do I need to do something extra to view them on SAP screen.
Thanks
Tushar>
Tushar Gawande wrote:
> Hi
> I have created Z-Code to update a standard SAP table. After executing my program I can see my desired entries in that SAP database table but when I am trying to view that same entries in SPRO I am not able to view it there.
> Am I missing something? Even if my entries are coming in SAP database table do I need to do something extra to view them on SAP screen.
> Thanks
> Tushar
/slap your hands
You're missing some common sense and the knowledge to be tasked to do such a thing. And the person/consultant who gave you this task as well.
Maybe you are looking for
-
How to connect SharePoint 2013 and Reporting Server - SQL Server 2008 - in native mode
Hi, We are running Report Server on a SQL Server 2008 environment in NATIVE mode. We just installed a SharePoint 2013 environment. The SharePoint roles are installed on a single server and we are using a seperated SQL Server 2012 server. The goal: Di
-
Clickpad Right Click not Working Consistantly
I just purchased an HP laptop with a Clickpad and reviewed your documentation for what areas on the pad to use for clicking however I can't seem to get a consistent right click even when I click in the area indicated by the diagram. I can be almost
-
Difficulty with some sites after last Security update..
anyone else had any problems? I've found that with my bank, and a couple of other sites like myspace, Safari keeps instantly coming up with 'server cannot be found' error, without even trying to access the sites. Sometimes shift-click/return does the
-
Fire window plug from another component
Hi, I want to fire a plug which is created in the window of one component, from the view of a different component. Is this possible? Any information would be much appreciated. Thank you!
-
currently my itunes stops working and just doesn't respond, some examples of are when i am downloading things like my podcasts and the genius(some smart butt). when ever they are close to completion, the itunes starts to freeze and stop working so no