Fm to read from SAP memory

Hi,
I need a fm whic will read the sub-equipments currnetly dismanteled for a superior equipment.
I am using tcode ieo2 and enhancement IEQM0003
Plz help

Hi
you can use export and import parameter i.d to read from sap memory
Regards
Divya

Similar Messages

How to read From SAP Memory

hello friends,
can u help me to read the document no. generated at runtime in BDC from
SAp Memory.
Thanks

HI,
See this both the eq u will be get ur requirement.
report ykrish_set_prg1.
data : g_ebeln type ekko-ebeln.
select-options : s_ebeln for g_ebeln obligatory.
data: begin of it_ekko occurs 0,
        ebeln type ekko-ebeln,
        bukrs type ekko-bukrs,
        bstyp type ekko-bstyp,
        bsart type ekko-bsart,
      end of it_ekko.
start-of-selection.
select ebeln bukrs
         bstyp bsart
    into table it_ekko
    from ekko
    where ebeln in s_ebeln.
if sy-subrc = 0.
    sort it_ekko by ebeln.
endif.
end-of-selection.
if not it_ekko[] is initial.
    loop at it_ekko.
      write :/ it_ekko-ebeln hotspot on,
               it_ekko-bukrs,
               it_ekko-bstyp,
               it_ekko-bsart.
      hide it_ekko-ebeln.
    endloop.
endif.
at line-selection.
set parameter id 'BES' field it_ekko-ebeln.
write :/ 'Parameter ID is set for Document Number :', it_ekko-ebeln.
report ykrish_get_prg1.
data : g_ebeln type ekko-ebeln.
get parameter id 'BES' field g_ebeln.
call transaction 'ME23N'.
Regards,
Naresh

Reading from ABAP memory, not available in call stack

Hi,
I need to read a table from ABAP memory. It is not available from the call stack, so I cant use the standard assign approach. The internal table is listed under System areas -> Area ITABS-HEADS with the name \FUNCTION-POOL=MLSP\DATA=IY_ESLL[]
Is it even possible to read this table? Seems as though I have to access function-pool MLSP to find it.
Regards,
Damian

Hi,
The main program of this function pool is SAPLMLSP. If you in any of theses includes can add a small form that returns the content of internal table ( IY_ESLL[] ) that should solve your problem.
In the program that need the data, write something like :
PERFORM Z_GET_MLSP_DATA(SAPLMLSP) using GT_ESLL.
This form can be created within any sub-include within the SAPLMLSP.
However, with a quick look at SAPLMLSP does not reveal any user modifiable includes, but I didn't check very carefully.
If you are on ECC 6.0, there are plenty of enhancement spots, which could be used for this purpose.

VBA automation to read from SAP

Hi,
Does anyone know how to read from an SAP screen using VBA code? I am NOT referring to reading from a table like VBAK, MARA etc.
The requirement is to enter a transaction code lets say VA03/VA43, enter a document/order number and read the contents of the screen using the screen field name like VBELN, KUNNR etc.
Regards

Using vbs:
If Not IsObject(application) Then
   Set SapGuiAuto = GetObject("SAPGUI")
   Set application = SapGuiAuto.GetScriptingEngine
End If
If Not IsObject(connection) Then
   Set connection = application.Children(0)
End If
If Not IsObject(session) Then
   Set session    = connection.Children(0)
End If
If IsObject(WScript) Then
   WScript.ConnectObject session,     "on"
   WScript.ConnectObject application, "on"
End If
session.findById("wnd[0]").maximize
session.findById("wnd[0]/tbar[0]/okcd").text = "VA03"
session.findById("wnd[0]/tbar[0]/btn[0]").press
session.findById("wnd[0]/usr/ctxtSOMEFIELDNAME").text = some_variable_you_can_store_later
etc, etc
I am not familiar with tath screen so you might need more code in wnd[0]/usr/ctxtSOMEFIELDNAME if there are multiple tabs.
It will be a lot easier to make SAP record the script: ALT+F12 -> "Script Recording and Playback", etc then go to the file which is saved in your local SAP directory and see what SAP did.
Hope this helps

Photoshop Elements 10 has suddenly stopped being able to read from camera memory card

For no apparent reason Photoshop Elements 10 can no longer read from my camera card reader. This happens both when I load the card in to my PC card reader or when I load to a card reader connected via USB.
I get the message "Elements Organiser cannot obtain files from this device. Please ensure that this deviCS is connected properly, or that the batter is charged and try again.
This happens despite the pictures loading and even the first one shows as a thumbnail. I can get around this by loading the photos in to Windows 7 and then bring them in to Elements from their file location.
Any suggestions will be greatly appreciated.

Please disregard this. I tried everything but restarting my computer & when I did, it downloaded all my messages.

Key is not visible in SQL 2012 R2 when query is read from SAP BI

Hi All,
I have a query in sap bi which has variables where key and text is displayed as per screen shot 1. How ever the same query is triggered from SQL 2012 r2 the key is not visible but text is visible as per screenshot 2 . Could any one suggest how the key will be displayed by there end(SQL).
Thanks,
Payani

I think you're in the wrong space as yor screenshots are not from any Business Objects or SAP BI 4.x products I know.
What exact product are you using ?
this space is for SAP Business Objects products family.

X6 Won't Copy Songs or Read from Mass Memory

Hi. My Nokia X6-00 16GB was working fine the other day. It's only 3days old and it will not let me copy music to my phone. I've tried everything. Wiped the mass memory. Hard Reset. Reinstalled the Ovi Suite.
When the phone is in mass memory mode i cannot access The Mass Memory / Phone Memory Folder in Windows Explorer. It Says I cannot view the folder because their isnt a program associatied with it.
Songs won't copy. only a certain few do. Even tho i tried putting on songs i had orginaly before the problems started and they wont go back on. "The phone doesn't support them" even though it did a few days ago. Any help?
Thanks

Mine is exactly the same downloaded 3 songs all fine then next day all downloads fail phone is only a week old

Re: RFID Tag Read from SAP ITS mobile

Hello,
I am also using MC3190 RFID Handheld and facing the same problem. can you guide me

thanks for the reply, we are using Internet Explorer for opening the URL.
I have another issues like
1. getting the scanned EPC value in the cursor position on the screen if datawedge application running in background but as soon as the EPC value appears int he field, the screen turns to "Page not found error" ( though in screen sequence next screen available) in short the problem is after getting EPC value in cursor field, without waiting for user/system action the page goes out.
2. I want to write the EPC value on the RFID tag using the handheld but its not happening
3. does the RFID handheld returns any value when EPC written succesfully on the tag ( such as tag written successfully )
your inputs will be really useful for me.
Thanks,
Neha

Java - Write And Read From memory Like CheatEngine ( Writing not working?)

Hello Oracle Forum
I came here some time ago to ask about javaFX , i solved all my issues and im right now waiting for javaFx tot ake over swing and hmm, im working on learning LIBGDX to create games in java.
However, im in need to create an app to change values of memory to fix a bug in an old program that i have, and the only way until now is using cheatEngine, So i decided to take a tutorial and learn how to do that in java.
Well, im able to read from the memory but the write isnt working somehow... Im posting the code here, if anyone can give me a hint, i would thank and a lot, because theres a community that really needs this app to automate the fix without using cheat engine.
package MainStart;
import com.br.HM.User32;
import com.br.kernel.Kernel32;
import com.sun.jna.Memory;
import com.sun.jna.Native;
import com.sun.jna.Pointer;
import com.sun.jna.ptr.IntByReference;
public class Cheater {
    static Kernel32 kernel32 = (Kernel32) Native.loadLibrary("kernel32", Kernel32.class);
    static User32 user32 = (User32) Native.loadLibrary("user32", User32.class);
    static int readRight = 0x0010;
    static int writeRight = 0x0020;
    //static int PROCESS_VM_OPERATION = 0x0008;
    public static void main(String[] args) {
        //Read Memory
        //MineSweeper = Campo Minado
        int pid = getProcessId("Campo Minado"); // get our process ID
        System.out.println("Pid = " + pid);
        Pointer readprocess = openProcess(readRight, pid); // open the process ID with read priviledges.
        Pointer writeprocess = openProcess(writeRight, pid);
        int size = 4; // we want to read 4 bytes
        int address = 0x004053C8;
        //Read Memory
        Memory read = readMemory(readprocess, address, size); // read 4 bytes of memory starting at the address 0x00AB0C62.
        System.out.println(read.getInt(0)); // print out the value!
        //Write Memory
        int writeMemory = writeMemory(writeprocess, address, new short[0x22222222]);
        System.out.println("WriteMemory :" + writeMemory);
        Memory readM = readMemory(readprocess, address, size);
        System.out.println(readM.getInt(0));
    public static int writeMemory(Pointer process, int address, short[] data) {
        IntByReference written = new IntByReference(0);
        Memory toWrite = new Memory(data.length);
        for (long i = 0; i < data.length; i++) {
            toWrite.setShort(0, data[new Integer(Long.toString(i))]);
        boolean b = kernel32.WriteProcessMemory(process, address, toWrite, data.length, written);
        System.out.println("kernel32.WriteProcessMemory : " + b); // Retorna false
        return written.getValue();
    public static Pointer openProcess(int permissions, int pid) {
        Pointer process = kernel32.OpenProcess(permissions, true, pid);
        return process;
    public static int getProcessId(String window) {
        IntByReference pid = new IntByReference(0);
        user32.GetWindowThreadProcessId(user32.FindWindowA(null, window), pid);
        return pid.getValue();
    public static Memory readMemory(Pointer process, int address, int bytesToRead) {
        IntByReference read = new IntByReference(0);
        Memory output = new Memory(bytesToRead);
        kernel32.ReadProcessMemory(process, address, output, bytesToRead, read);
        return output;
package com.br.HM;
import com.sun.jna.Native;
import com.sun.jna.Pointer;
import com.sun.jna.Structure;
import com.sun.jna.platform.win32.WinDef.RECT;
import com.sun.jna.ptr.ByteByReference;
import com.sun.jna.ptr.IntByReference;
import com.sun.jna.win32.StdCallLibrary.StdCallCallback;
import com.sun.jna.win32.W32APIOptions;
* Provides access to the w32 user32 library. Incomplete implementation to
* support demos.
* @author Todd Fast, [email protected]
* @author [email protected]
public interface User32 extends W32APIOptions {
    User32 INSTANCE = (User32) Native.loadLibrary("user32", User32.class, DEFAULT_OPTIONS);
    Pointer GetDC(Pointer hWnd);
    int ReleaseDC(Pointer hWnd, Pointer hDC);
    int FLASHW_STOP = 0;
    int FLASHW_CAPTION = 1;
    int FLASHW_TRAY = 2;
    int FLASHW_ALL = (FLASHW_CAPTION | FLASHW_TRAY);
    int FLASHW_TIMER = 4;
    int FLASHW_TIMERNOFG = 12;
    public static class FLASHWINFO extends Structure {
        public int cbSize;
        public Pointer hWnd;
        public int dwFlags;
        public int uCount;
        public int dwTimeout;
    int IMAGE_BITMAP = 0;
    int IMAGE_ICON = 1;
    int IMAGE_CURSOR = 2;
    int IMAGE_ENHMETAFILE = 3;
    int LR_DEFAULTCOLOR = 0x0000;
    int LR_MONOCHROME = 0x0001;
    int LR_COLOR = 0x0002;
    int LR_COPYRETURNORG = 0x0004;
    int LR_COPYDELETEORG = 0x0008;
    int LR_LOADFROMFILE = 0x0010;
    int LR_LOADTRANSPARENT = 0x0020;
    int LR_DEFAULTSIZE = 0x0040;
    int LR_VGACOLOR = 0x0080;
    int LR_LOADMAP3DCOLORS = 0x1000;
    int LR_CREATEDIBSECTION = 0x2000;
    int LR_COPYFROMRESOURCE = 0x4000;
    int LR_SHARED = 0x8000;
    Pointer FindWindowA(String winClass, String title);
    int GetClassName(Pointer hWnd, byte[] lpClassName, int nMaxCount);
    public static class GUITHREADINFO extends Structure {
        public int cbSize = size();
        public int flags;
        Pointer hwndActive;
        Pointer hwndFocus;
        Pointer hwndCapture;
        Pointer hwndMenuOwner;
        Pointer hwndMoveSize;
        Pointer hwndCaret;
        RECT rcCaret;
    boolean GetGUIThreadInfo(int idThread, GUITHREADINFO lpgui);
    public static class WINDOWINFO extends Structure {
        public int cbSize = size();
        public RECT rcWindow;
        public RECT rcClient;
        public int dwStyle;
        public int dwExStyle;
        public int dwWindowStatus;
        public int cxWindowBorders;
        public int cyWindowBorders;
        public short atomWindowType;
        public short wCreatorVersion;
    boolean GetWindowInfo(Pointer hWnd, WINDOWINFO pwi);
    boolean GetWindowRect(Pointer hWnd, RECT rect);
    int GetWindowText(Pointer hWnd, byte[] lpString, int nMaxCount);
    int GetWindowTextLength(Pointer hWnd);
    int GetWindowModuleFileName(Pointer hWnd, byte[] lpszFileName, int cchFileNameMax);
    int GetWindowThreadProcessId(Pointer hWnd, IntByReference lpdwProcessId);
    interface WNDENUMPROC extends StdCallCallback {
         * Return whether to continue enumeration.
        boolean callback(Pointer hWnd, Pointer data);
    boolean EnumWindows(WNDENUMPROC lpEnumFunc, Pointer data);
    boolean EnumThreadWindows(int dwThreadId, WNDENUMPROC lpEnumFunc, Pointer data);
    boolean FlashWindowEx(FLASHWINFO info);
    Pointer LoadIcon(Pointer hInstance, String iconName);
    Pointer LoadImage(Pointer hinst, // handle to instance
            String name, // image to load
            int type, // image type
            int xDesired, // desired width
            int yDesired, // desired height
            int load // load options
    boolean DestroyIcon(Pointer hicon);
    int GWL_EXSTYLE = -20;
    int GWL_STYLE = -16;
    int GWL_WNDPROC = -4;
    int GWL_HINSTANCE = -6;
    int GWL_ID = -12;
    int GWL_USERDATA = -21;
    int DWL_DLGPROC = 4;
    int DWL_MSGRESULT = 0;
    int DWL_USER = 8;
    int WS_EX_COMPOSITED = 0x20000000;
    int WS_EX_LAYERED = 0x80000;
    int WS_EX_TRANSPARENT = 32;
    int GetWindowLong(Pointer hWnd, int nIndex);
    int SetWindowLong(Pointer hWnd, int nIndex, int dwNewLong);
    int LWA_COLORKEY = 1;
    int LWA_ALPHA = 2;
    int ULW_COLORKEY = 1;
    int ULW_ALPHA = 2;
    int ULW_OPAQUE = 4;
    boolean SetLayeredWindowAttributes(Pointer hwnd, int crKey,
            byte bAlpha, int dwFlags);
    boolean GetLayeredWindowAttributes(Pointer hwnd,
            IntByReference pcrKey,
            ByteByReference pbAlpha,
            IntByReference pdwFlags);
     * Defines the x- and y-coordinates of a point.
    public static class POINT extends Structure {
        public int x, y;
     * Specifies the width and height of a rectangle.
    public static class SIZE extends Structure {
        public int cx, cy;
    int AC_SRC_OVER = 0x00;
    int AC_SRC_ALPHA = 0x01;
    int AC_SRC_NO_PREMULT_ALPHA = 0x01;
    int AC_SRC_NO_ALPHA = 0x02;
    public static class BLENDFUNCTION extends Structure {
        public byte BlendOp = AC_SRC_OVER; // only valid value
        public byte BlendFlags = 0; // only valid value
        public byte SourceConstantAlpha;
        public byte AlphaFormat;
    boolean UpdateLayeredWindow(Pointer hwnd, Pointer hdcDst,
            POINT pptDst, SIZE psize,
            Pointer hdcSrc, POINT pptSrc, int crKey,
            BLENDFUNCTION pblend, int dwFlags);
    int SetWindowRgn(Pointer hWnd, Pointer hRgn, boolean bRedraw);
    int VK_SHIFT = 16;
    int VK_LSHIFT = 0xA0;
    int VK_RSHIFT = 0xA1;
    int VK_CONTROL = 17;
    int VK_LCONTROL = 0xA2;
    int VK_RCONTROL = 0xA3;
    int VK_MENU = 18;
    int VK_LMENU = 0xA4;
    int VK_RMENU = 0xA5;
    boolean GetKeyboardState(byte[] state);
    short GetAsyncKeyState(int vKey);
package com.br.kernel;
import com.sun.jna.*;
import com.sun.jna.win32.StdCallLibrary;
import com.sun.jna.ptr.IntByReference;
// by deject3d
public interface Kernel32 extends StdCallLibrary
    // description from msdn
    //BOOL WINAPI WriteProcessMemory(
    //__in   HANDLE hProcess,
    //__in   LPVOID lpBaseAddress,
    //__in   LPCVOID lpBuffer,
    //__in   SIZE_T nSize,
    //__out SIZE_T *lpNumberOfBytesWritten
    boolean WriteProcessMemory(Pointer p, int address, Pointer buffer, int size, IntByReference written);
    //BOOL WINAPI ReadProcessMemory(
    //          __in   HANDLE hProcess,
    //          __in   LPCVOID lpBaseAddress,
    //          __out LPVOID lpBuffer,
    //          __in   SIZE_T nSize,
    //          __out SIZE_T *lpNumberOfBytesRead
    boolean ReadProcessMemory(Pointer hProcess, int inBaseAddress, Pointer outputBuffer, int nSize, IntByReference outNumberOfBytesRead);
    //HANDLE WINAPI OpenProcess(
    // __in DWORD dwDesiredAccess,
    // __in BOOL bInheritHandle,
    // __in DWORD dwProcessId
    Pointer OpenProcess(int desired, boolean inherit, int pid);
    /* derp */
    int GetLastError();
http://pastebin.com/Vq8wfy39

Hello there,
this tutorial was exactly what I needed, so thank you.
Your problem seems to be in this line:
int writeMemory = writeMemory(writeprocess, address, new short[0x22222222]);
The problem is, you're creating a new short array with the length of 0x22222222. Which not only results in an java.lang.OutOfMemoryError: Java heap space
but also, if it would work, would create an empty array with the length of 0x22222222.
I think you want to write 0x22222222 as value in your address.
Correctly stored the code you'd need to write would be:
short[] sarray = new short[]{(short) 0x22222222};
But because the value is too long for the short, the value stored in your array would be the number 8738.
I think, what you want to do is to store the number 572662306, which would be the hex value, stored in an int variable.
So first of all you need to strip down your hex-value to shorts:
Short in Java uses 16 Bit = 2 Byte. 0x22222222 -> 0x2222 for your high byte and 0x2222 for your low byte
So your array would be
short[] sarray = new short[]{0x2222,0x2222};//notice, that sarray[0] is the lowbyte and sarray[1] the high byte, if you want to store 20 it would be new short[]{20,0} or if you use hex new short[]{0x14,0x00}
The next part is your writeToMemory Method. If I'm right, the method in the tutorial is a little bit wrong. The right version should be this:
public static int writeMemory(Pointer process, int address, short[] data) {
IntByReference written = new IntByReference(0);
int size = data.length*Short.SIZE/8;
Memory toWrite = new Memory(size);
for (int i = 0; i < data.length; i++) {
toWrite.setShort(i*Short.SIZE/8,
data[i]);
boolean b = kernel32.WriteProcessMemory(process, address, toWrite,
size, written);
return written.getValue();
You need to calculate your offset right. And the size of your memory. Maybe you could write this method not with shorts, but with integers. But this should work.
If you pass your new array to this function, it should write 0x22222222 to your adress. If you read out your toWrite value with toWrite.getInt(0) you get the right value.
And there is one more thing. In order to write data to a process, you need to grant two access rights:
A handle to the process memory to be modified. The handle must have PROCESS_VM_WRITE and PROCESS_VM_OPERATION access to the process.
You have to grant the right to write data: PROCESS_VM_WRITE: 0x0020 and PROCESS_VM_OPERATION: 0x0008
So your writeProcess needs to get initialized this way:
Pointer writeprocess = openProcess(0x0020|0x0008,pid);
I hope this works for you. Let me know.
Greetings
Edit:
Because every data you write will be 1 byte to whatever count of byte I think the best way is to use the following method to write data to the memory:
public static void writeMemory(Pointer process, long address, byte[] data)
int size = data.length;
Memory toWrite = new Memory(size);
for(int i = 0; i < size; i++)
toWrite.setByte(i, data[i]);
boolean b = kernel32.WriteProcessMemory(process, address, toWrite, size, null);
You can see some changes. First I changed all address values from int to long, because some addresses are out of range. And with all, i mean all. Not only in writeMemory, but also in readMemory and in your kernel32 Class.
Second I don't use the IntByReference anymore..
To use this method you need to store your data the following way if you would write 4 Byte data:
byte[] values = new byte[]{0x14,0x00,0x00,0x00};
This value would be the number 20. Index 0 will be the lowest byte and index 3 will be the highest byte.
And one more thing I wrote is an method which you can use to calculate your address if you have a baseAddress.
If you restart your program/game your old addresses won't point at the same values of your game. With some research (I use CheatEngine) you can get the baseaddress. This one will alway be the same.
To get from your baseaddress to the dynamic adress you use offsets.
public static long findDynAddy(Pointer process, int[] offsets, long baseAddress)
long pointer = baseAddress;
int size = 4;
Memory pTemp = new Memory(size);
long pointerAddress = 0;
for(int i = 0; i < offsets.length; i++)
if(i == 0)
kernel32.ReadProcessMemory(process, pointer, pTemp, size, null);
pointerAddress = ((pTemp.getInt(0)+offsets[i]));
if(i != offsets.length-1)
kernel32.ReadProcessMemory(process, pointerAddress, pTemp, size, null);
return pointerAddress;
This methods gets a process, an array of offsets (hex-values) and your baseadress and returns the dynamic address.
For Solitaire the following code would give you the address to the score:
long baseAddr = 0x10002AFA8L;
int[] offsets = new int[]{0x50,0x14};
long addr = findDynAddy(process, offsets, baseAddr);
If somebody wants to get the whole code (user32, kernel32 and the cheater) just pm me and I will give you a link.

SAP Memory, Set and Get parameter

Hi All,
     I am running two programs in background from program1
Eq: Program1 --> Calls 2 programs
                          Program1_01.(First Program)
                          Program2_01(Second Program).
Programs1 schedules Program1_01 and Program1_02 in background. These two programs are interdependent.
Program1_01 extracts data, evaluates and sets the Flag. This Flag is exported to SAP Memory using
Set parameter id 'p_id_flag' field Flag.
Program1_02 checks for Program1_01 is completed in background. If complted gets the Flag value from SAP Memory using "Get paramter id 'p_id_flag' field Flag.
When i checked this is not happning. When saw Flag in Program1_01 is set as Flag = 'X'.
When I came and checked in Program1_02 after Get Parameter statement Falg value is SPACE.
Cn hlp on this?

Hi,
The problem simply lies in fact that pid was provided in lowercase.
Use:
SET PARAMETER ID 'P_ID_FLAG' FIELD flag.
GET PARAMETER ID 'P_ID_FLAG' FIELD flag.
It works fine then.
Note!
Though SAP claims it is mandatory to create pid in TPARA table, in fact this is not required. Each time SET PARAMETER is executed, system checks if data object P_ID_FLAG was defined in SAP memory. If not it will automatically create it for us. But be carefull here. If there is such data object, its value will be overwritten.
As for your last question, your statement (FREE MEMORY ....) is ok.
Regards
Marcin
Edited by: Marcin Pciak on Jan 22, 2009 1:14 PM

How to read data from external memory

Hi all,
I am using MB5B report in my program to get Current stock. So, I have submitted MB5B report in background and i have exported the result to SAP memory. Now i want to read some of the values of exported output. I don want to use complete MB5B output. Only soem fields from MB5B report.
How can I do it ?
Thx & regards,
Ravi

Hi,
SAP memory is a memory area to which all main sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters can be set either for a particular user or for a particular program using the SET PARAMETER statement. Other ABAP programs can then retrieve the set parameters using the GET PARAMETER statement. The most frequent use of SPA/GPA parameters is to fill input fields on screens
SAP Memmory - use to acess memmory area between session
eg:- when u call a transaction or report ( within ur program) want the value of the prticular field should have value define by you.
Then you use GET and SET parameter command field you set or get should have parameter ID
Set
http://www.geocities.com/SiliconValley/Campus/6345/set_para.htm
GET
http://www.geocities.com/SiliconValley/Campus/6345/get_para.htm
EXPORT
http://www.geocities.com/SiliconValley/Campus/6345/export01.htm
Award points if found helpfull....
Cheers,
Chandra Sekhar.

Reading from memory

Hi,
My requirement is same as Kiran, when ever dealer create or change the business partner in SAP CRM system before saving a business partner, i need to send the data to the XI system from the XI system it will send a data to quality stage and returns back the valid address the problem which i am facing is I created a implemention class for BAdi:PARTNER_UPDATE and able read the data from the memory which iam sending data from SAP CRM system but now the problem is that how to incorporate the changes which occured in quality stage which i need to over write the fields which i sent.And then commit the data into SAP CRM System and then it should create a business partner with proper address, quick response is apperciated.

Could any please help above problem..

Upload/Read Documents from SAP-CRM to/from SharePoint

Hello ,
We have a requirement to upload documents from SAP CRM to share point(select the document from the desktop and pass the data to sharepoint server) , the user should also be able to view the documents located in Sharepoint.
There are web methods in SharePoint already developed which will allow the uploading of the documents and passing the location of the stored documents as URL back to CRM.
Could any one please help me in the follwoing
1. Configurations to do on SAP side for Calling the methods developed in Sharepoint.
2. Configuration to pass the document from SAP CRM(Uploaded from desktop) to sharepoint.
Thanks in advance

Hi Ravi,
We also have a similar requirement in which we need to read the document stored in an external server from SAP CRM. Can you please let me know know how you achieved this. I will know the exact path (URL) of the document. Using this is it possible to retrieve the content of the document.
Regards,
Sudha.

Help Required -- Can we use SQL Query to READ data from SAP MDM Tables

Hi All,
Please help.........
Can we use SQL Query to READ(No Creation/Updation/Deletion just Read) Data from SAP MDM tables directly, without using MDM Syndicator.
Or direct SQL access to SAP MDM tables is not possible. Only through MDM Syndicator can we export data.
Thanks in Advance
Regards

All the tables you create in Repository comes under A2i_CM_Tables in Database named as your repository name. So the tables names are fields of table A2i_CM_Tables. Now i tried it but cant make it.
Now, I dont think its possible to extract all fields in tables and there values using select query. May be pure sql guy can do that or not.
But there is no relation of data extraction and syndicator. Data is viewed in Data Manager. and you can also store data in a file from DM also.
BR,
Alok

I just bought a MacBook Pro, and need to d/l my photos from my memory card reader. iphoto keeps coming up as the app to use, but the column on the left says "No name, and shows 0 photos on the black screen. How do I view the photos on the reader?

I just bought a MacBook Pro, and need to d/l my photos from my memory card reader. iphoto keeps coming up as the app to use, but the column on the left says "No name, and shows 0 photos on the black screen. How do I view the photos on the reader?

Did it... When I clicked on "No name", a file folder came up and, I forgot to put MacBook Pro in the name bar... That was it! Maybe someone else can use this post Hopefully...

Fm to read from SAP memory

Similar Messages

Maybe you are looking for