FM to read the texts in GOS note

Hi gurus,
do you know any FM to read the texts when creating a note in GOS?
Thanks!

Try to use fm
SO_DOCUMENT_READ_API1
SO_NOTE_READ
a®

Similar Messages

  • How to Read the text enetered in Notes Tab of Invoice Doc. ( FB60, MIRO  )

    Hi All,
    We are trying to read the Text Entered in Notes Tab of Invoice Doc using the tcode FB60, MIRO..
    We are able to see the text when we use these tcode but can you please help us how to read these deatils in a program..
    We wanted to download these notes corresponding to the Invoivces..
    Thanks in Advance....
    Regards,
    Vidya.

    Hmm..you will get lots of links if you search the forum/google..
    Anyway - keep a breakpoint in SAVE_TEXT/READ_TEXT function module and create/display MIRO and FB60 documents - this tell you how it stores and reads long text.
    You should use READ_TEXT in your program with same header inputs with respective TDOBJECT and TDNAME parameters.

  • Friend received a text from me saying that to read the text he should hit the download button that i did not send

    Just got a text from a friend that claims he received a text from me. This text told him that to "receive my text" he needed to hit a download button that was in the text. i DID NOT send him any text! This is alarming! I immediately changed my Apple ID and password. Should i be worried? Has anyone experienced this and what does it mean?!

    Perhaps your friends phone has been hacked.
    Unless yours has been jailbroken, it has not been hacked.
    It would seem far more likely that your friend has the issue, than you.

  • I can no longer read the text of my emails after I open them

    All of a sudden I can no longer read the text of my incoming mail, however if I click to reply I can read text then

    Go to Settings > General > Reset > Reset Network Settings; will not erase any data, just resets network connections such as wifi, and cellular data; Hope this helps.

  • How can I prevent a PDF file from being copied, printed or downloaded? Students should only be able to view the text and and not distribute it in any way.

    How can I prevent a PDF file from being copied, printed or downloaded? Students should only be able to view the text and and not distribute it in any way.

    You can prevent it from being printed by applying a security policy to it
    in Acrobat. The rest can't be prevented, unless you spend  a LOT of money
    on DRM protection.

  • I can't read the text on my toolbar after changing personas, and unchecking "use text color" doesn't do anything even if I change personas.

    Several personas come with unreadable text and accent color. This article explains how to resolve the issue:
    http://support.mozilla.com/en-US/kb/Cannot+read+text+after+selecting+a+Persona
    However, when I followed the directions, the text colors did not stay the same as I switched personas.

    If you have installed a persona then the default text color and background color of the toolbars are defined by that persona.<br />
    The colors of the currently selected persona are stored as the first entry in the pref <b>lightweightThemes.usedThemes</b> as textcolor and accentcolor.
    You can edit that pref and set another value for the "textcolor":"#ffffff" part (e.g. "textcolor":"#000000").
    See also http://kb.mozillazine.org/about%3Aconfig

  • The text "Remove" is not appearing in the remove button of Bookmarks.

    Hi,
    The text "Remove" is not appearing in the remove button of Bookmarks. My problem is the same as mentioned in this question.
    https://support.mozilla.org/en-US/questions/1017302
    The solutions suggested on the link don't seem to work. How do I resolve this? For me this problem is persisting everyday.
    Thanks

    You already tested in Firefox's Safe Mode and that did not make any difference?
    Can you associate this problem with any software changes, such as upgrading from Firefox 31 to Firefox 32, or updating an add-on, or Windows, etc.?
    Have you noticed problems with any other dialogs or menus?
    Occasionally a corrupted settings file may cause issues with dialogs. This file also stores toolbar customizations. You can rename the file and customize from scratch.
    Open your current Firefox settings (AKA Firefox profile) folder using either
    * "3-bar" menu button > "?" button > Troubleshooting Information
    * (menu bar) Help > Troubleshooting Information
    * type or paste about:support in the address bar and press Enter
    In the first table on the page, click the "Show Folder" button
    Leaving that window open, switch back to Firefox and Exit, either:
    * "3-bar" menu button > "power" button
    * (menu bar) File > Exit
    Pause while Firefox finishes its cleanup, then rename '''localstore.rdf''' to something like localstore.old
    Start Firefox back up again. Any improvement in the Edit Bookmarks dialog?

  • Hello, I have an iPad Mini WiFi Cellular white 16Gb and I puted my sim inside it but, I cant read the text message that I recieve in the Sim. What can i do? And I can't put the sim in a cellphone coz it doesn't recognize it. Please help me! Thank you.

    Hello, I have an iPad Mini WiFi Cellular white 16Gb and I puted my sim inside it but, I cant read the text message that I recieve in the Sim. What can i do? And I can't put the sim in a cellphone coz it doesn't recognize it. Please help me! Thank you.

    iPads do not do SMS.

  • Go - Connect to Server does NOT work - The text entered does not appear to

    Two Macs with Mac OS X 10.5.2. Both migrated from Mac OS X 10.4.11. One Mactel and one PowerPC. I can see the former from the latter, but not the latter from the former:
    Go/Connect to Server
    gives this error all the time for all listed servers:
    The text entered does not appear to be a recognized URL format
    This does not help:
    Mac OS X 10.5: "The text entered does not appear to be a recognized URL format" alert when connecting to server
    http://docs.info.apple.com/article.html?artnum=307256
    Any idea how to fix it? Thanks.

    At this point I think you should get Applejack...
    http://www.versiontracker.com/dyn/moreinfo/macosx/19596
    After installing, boot holding down CMD+s, then when the prompt shows, type in...
    applejack AUTO
    Then let it do all 5 of it's things.
    I'd do it on all of them.
    Then we can go on from there if you still have a problem, but with several queastions eliminated!

  • I have a manual that contains headings and index entries that contain less than and greater than characters, and . The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the C

    I have a manual that contains headings and index entries that contain less than and greater than characters, < and >. The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the Contents or the Index of the generated HTML. In the Contents the words are completely missing and in the index entries the '\' characters that are required in the markers remain in the entry but the leading less than symbol and the first character of the word is deleted; hence what should appear as <dataseries> appears as \ataseries\>. I believe this is a FMv12 bug. Has anyone else experienced this? Is the FM team aware and working on a fix. Any suggestions for a workaround?

    The Index issue is more complicated since in order to get the < and > into the index requires the entry itself to be escaped. So, in order to index '<x2settings>' you have to key '\<x2settings\>'. Looking at the generated index entry in the .js file we see '<key name=\"\\2settings\\&gt;\">. This is a bit of a mess and produces an index entry of '\2settings\>'. This ought to be '<key name=\"&amp;lt;x2settings&amp;gt;\" >'. I have tested this fix and it works - but the worst of it is that the first character of the index entry has been stripped out. Consequently I cannot fix this with a few global changes - and I have a lot of index entries of this type. I'm looking forward to a response to this since I cannot publish this document in its current state.  

  • Can I read the texts msgs from the other lines on my account?

    Can I read the texts msgs from the other lines on my account?

    rcschnoor wrote:
    tikibar1 wrote:
    If the phone is using Verizon Messages and you know the MyVerizon password, then you can read the messages from your computer.
    Of course, this assumes the messages had not been deleted on the phone by the user.
    Of course!  And that also applies to reading the texts on the phones themselves. 
    Deleted texts will still show up on the text logs, though.

  • Read the text in object LFA1 with ID Z001

    Hi Guys,
    Can u please suggest me how can i read the text in object LFA1 with ID Z001.
    Actually my requirement is i have service agent in my internal table.
    Z002 is the current pro number..that is ready to use after using that update that current pro # Z002 with the next available in the range...(i.e Z001)
    Z001 contains range of Pro number.,. like 848 477 250 to 848 477 740
    asume you used the # 848 477 250 in one shipment, update the Z002 with the second one 848 477 251
    Can u please suggest me this how can i develop. Just send me the suggestions plese i will do that coding. Lookingforward your kind co operation.
    Regards,
    Ravi

    Basic call to function is as follows:
    CALL FUNCTION 'READ_TEXT'
      EXPORTING
        id                            = 'Z001'    "Text ID = 'Z001'
        language                      = 'E'       "English
        name                          = 'LFA1'    " Not sure if this is correct
        object                        = l_vendor  "Vendor with leading zeros
      TABLES
        lines                         = l_output   "Table of Structure  TLINE
    EXCEPTIONS
       ID                            = 1
       LANGUAGE                      = 2
       NAME                          = 3
       NOT_FOUND                     = 4
       OBJECT                        = 5
       REFERENCE_CHECK               = 6
       WRONG_ACCESS_TO_ARCHIVE       = 7
       OTHERS                        = 8.
    I am not sure I have the name and object exactly right - If you display one of the texts in the old style editor and use menu option Goto-->Header you can see these values.  Alternatively look in table STXH for text headers to see how the key is constructed.
    Andrew

  • Do any of you have trouble reading the text on the 15" MBP?

    Does the 1440x900 resolution make it difficult to read the text on the screen?

    Not for me, but my eyes are good at close range for someone in his 60s. Those who are more farsighted and need reading glasses for close work may have more trouble.
    The things to be concerned about are the menus, dialog boxes, and other Finder and OS elements that can't be enlarged except by reducing the display resolution, which blurs everything on the display. In most applications' windows, you can easily change the font size or zoom in on the page as a whole to suit yourself. Ultimately, whether you're comfortable with the screen resolution at its native (maximum) setting is a purely personal decision that only you can make. I strongly advise you NOT to buy any computer whose display is uncomfortable to use at its native setting, because you will be looking at a blurry screen ALL the time if you have to use any LCD display at a non-native resolution.

  • Powershell script - how to read a registry hive and store the value in text file and then again read the text file to write the values back in registry

    Hi All,
    powershell script Method required to read a value from registry and then taking the backup of that values in some text file.
    For example the hive is
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment\Path
    and under path i need to take back up  of values in some text file and then put some value in the registry after back is taken in text file.
    Also how to read the text file values so that we can again write to registry hive  back from the back up text file.
    Your help is much appreciated.
    Umeed4u

    I think you need to read this first:
    http://social.technet.microsoft.com/Forums/scriptcenter/en-US/a0def745-4831-4de0-a040-63b63e7be7ae/posting-guidelines?forum=ITCG
    Don't retire TechNet! -
    (Don't give up yet - 12,830+ strong and growing)

  • How to read the text in a link present in a web site ?

    An excellent example I can think of ..is this forum. Using a Java program I need to access/read
    the text present in all the topics posted here (in one page) and put them into a file. In this way if suppose the network goes down, I can still read the entire topic stored in the text file. This program can be scheduled to run daily.
    Can anyone give any sample code/hints to do this ?
    Thanks in advance.

    You need to make a URLConnection to the page you want, and get the input stream from that page.
    The contents of the input stream (use a reader to get them) will give you the raw HTML code. Use a parser to get the actual content. I dont know of a parser offhand, but you can search for one.

Maybe you are looking for

  • Using DMR for inspection how to find a lot whether it is skipped one or not

    Hi,       I am using DMR for material and vendor combination using a skipping of 4 lots in a cycle of 1 to 5 lots  and i want to print a document when the lot generates. I want to know whether that lot is a normal lot or an skipped lot. i want at whi

  • Select plot by mouse in a multi-plot graph

    Hello I'm using LV 8.5 and have a question using a waveform graph. I have multiple plots (up to about 300) in this graph and most of them will have approximately the same waveform but some will have a totally different -> the user needs to identify t

  • Delete Account under iCloud

    Under iOS6 > System Preferences > iCloud there is a delete account button. Will this delete my whole iCloud account or just the setup of icloud and it's content on this device?

  • Need help tv@nywhere

    Hey all, I just recently bought a tv anywhere card.  Took me a while to figure out there is no stereo sound.  But anyways the card works fine, except one thing.  On the top left of the screen, green letters will pop up displaying the channel number.

  • General Version Definition

    Hi Experts, I created an additional version for our plan data. I maintained it in SPRO > Controlling > General Controlling > Organization > Maintain Versions: Version 0 - original plan Version 1 - 1st revision Version 2 - 2nd revision Version 3 - 3rd