FM to retrieve Summarized BOM (CS13) and get TOP parent

Hi Gurus,
I'd like to know what FM should I use to retrieve BOM so that I will have the same data generated if I run tcode CS13.
I tried to use CS_BOM_EXPL_MAT_V2 but the number or items returned was much bigger compared to CS13.
I'd also like to know if there's a way to get the TOP parent using select statements.
Thanks in advance.
Dexter

What about CS_BOM_EXPLOSION and leaving import parameter MEHRS = space?

Similar Messages

Is it possible to retrieve the broken motherboard and get a replacement.

Hello everyone, I'm desperate for help now. I just had a look with this forum today and realised many people have been suffering the same sudden death issue of Z3C.I know the original post was too long so I edited it
I experienced the same issue in last December, at first it was the motherboard issue so they got it replaced but when they tried to set it up the screen was broken, so I have no idea how long I have to wait. I just want to say It had been a joy and wonderful experience to use the phone so there were actually a lot of important information and memorable things kept in the phone which I would die for, I even tried to request that would it be possible to have the damaged motherboard back or could they at least try to restore the datas back to the phone. If anyone has done similar thing before and managed to complain through email please let me know the email I will be very appreciate!
Original:
Spoiler (Highlight to read)
I bought this phone in the end of last September and this is speaking from a proud loyal user of Sony products and I have owned wide range of products like Bravia television, home theater system, and Playstations, they have been a great pleasure to me. Before the release of Z3 Compact, I was desperately looking for a small sized phone with capability of good performance until I saw the advertising of Z3 Compact, so I had finally found a phone that best suited my every needs. I'd been enjoying every single feature of the phone but it was only 2 months since I bought it then the phone died suddenly when I woke up the next morning and I had an important meeting that day. Due to the problem of course I could not make it in the end. I had done everything I could but the phone could not be turned on at all, so there was entirely no way for me to back up everything before I sent it to repair. I could say it was very unfortunate for me because I have many friends who are still using high-end Xperia phones like Z2 and they are still running fine even until this day.
Finally I got a call few weeks ago so I thought I could finally get it after such a long wait. Instead I was told that it was the mainboard issue so a new one got replaced, but when they tried to set up the phone they noticed the screen was broken, so they had to deliver it again to the headquarter of repair centre in Kuala Lumpur. I have been waiting for nearly two months. Most importantly is that I have to study overseas next month so what should I do if the same problem happens again? Therefore I asked for a replacement and they said they would try for it and wait for approval from their manager but chances are very low.
For quite sometime I have been looking for the email of customer support but so far I could only manage to get the contact number, seriously Sony? Maybe it was my mistake but I just couldn't find the email contact except for regions like US and Europe since those regions are far more popular compared to where I am, a country that probably no one has ever heard of-Malaysia. I know it's no luck to seek for support from Sony Malaysia, so I was actually trying to look for international office for Asia region, but so far I could only find Australia and Hong Kong, therefore I gave it a try but it appeared to be an error link that led to nowhere.
Since I couldn't find the email at all I was given no choice but to call the customer support. I was really frustrated and unsatisfied with the solution they offered during the first call, saying that if the phone breaks again I can only bring it back from overseas to the repair centre in my home country just to get it fixed whenever I have the chance to go back.
I just want to say It had been a joy and wonderful experience to use the phone so there were actually a lot of important information and memorable things kept in the phone which I would die for, I even tried to request that would it be possible to have the damaged motherboard back or could they at least try to restore the datas back to the phone. Although I know I can't do anything with it but who knows maybe someday there is someone expert enough in IT can lend me a hand in such case. I know it's their policy to not return the damaged parts to customers but it's only my very little request even if they can't get me a replacement.
Since Sony is such a giant corporation, hasn't there been any solution they can offer since most users of Z3C are experiencing the same issue? Instead of raging my disappointments through internet which could spread false information and negatively affect the reputation, I hope this is the best way to solve my problems and let everyone knows.
I'm sorry if the post is too long but this is the best way to express my feeling. If anyone has similar experience or knows the email, please let me know and any help provided will be much appreciated.
I bought this phone in the end of last September and this is speaking from a proud loyal user of Sony products and I have owned wide range of products like Bravia television, home theater system, and Playstations, they have been a great pleasure to me. Before the release of Z3 Compact, I was desperately looking for a small sized phone with capability of good performance until I saw the advertising of Z3 Compact, so I had finally found a phone that best suited my every needs. I'd been enjoying every single feature of the phone but it was only 2 months since I bought it then the phone died suddenly when I woke up the next morning and I had an important meeting that day. Due to the problem of course I could not make it in the end. I had done everything I could but the phone could not be turned on at all, so there was entirely no way for me to back up everything before I sent it to repair. I could say it was very unfortunate for me because I have many friends who are still using high-end Xperia phones like Z2 and they are still running fine even until this day. Finally I got a call few weeks ago so I thought I could finally get it after such a long wait. Instead I was told that it was the mainboard issue so a new one got replaced, but when they tried to set up the phone they noticed the screen was broken, so they had to deliver it again to the headquarter of repair centre in Kuala Lumpur. I have been waiting for nearly two months. Most importantly is that I have to study overseas next month so what should I do if the same problem happens again? Therefore I asked for a replacement and they said they would try for it and wait for approval from their manager but chances are very low. For quite sometime I have been looking for the email of customer support but so far I could only manage to get the contact number, seriously Sony? Maybe it was my mistake but I just couldn't find the email contact except for regions like US and Europe since those regions are far more popular compared to where I am, a country that probably no one has ever heard of-Malaysia. I know it's no luck to seek for support from Sony Malaysia, so I was actually trying to look for international office for Asia region, but so far I could only find Australia and Hong Kong, therefore I gave it a try but it appeared to be an error link that led to nowhere. Since I couldn't find the email at all I was given no choice but to call the customer support. I was really frustrated and unsatisfied with the solution they offered during the first call, saying that if the phone breaks again I can only bring it back from overseas to the repair centre in my home country just to get it fixed whenever I have the chance to go back. I just want to say It had been a joy and wonderful experience to use the phone so there were actually a lot of important information and memorable things kept in the phone which I would die for, I even tried to request that would it be possible to have the damaged motherboard back or could they at least try to restore the datas back to the phone. Although I know I can't do anything with it but who knows maybe someday there is someone expert enough in IT can lend me a hand in such case. I know it's their policy to not return the damaged parts to customers but it's only my very little request even if they can't get me a replacement. Since Sony is such a giant corporation, hasn't there been any solution they can offer since most users of Z3C are experiencing the same issue? Instead of raging my disappointments through internet which could spread false information and negatively affect the reputation, I hope this is the best way to solve my problems and let everyone knows. I'm sorry if the post is too long but this is the best way to express my feeling. If anyone has similar experience or knows the email, please let me know and any help provided will be much appreciated.

Sorry to hear that, but this forum is for us, users, and what you need is someone from Xperia Care to find your motherboard and send it back, I don't think it'll be possible to retrieve any data from a broken motherboard.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

My granddaughter's Ipod Touch is disabled due to too many attempts to enter her password. How can she retrieve her her password and get her ipod touch restored?

My granddaughter's Ipod Touch is disabled due to too many attempts at entering her password. How can she get her Ipod enabled and retrieve her password which she has forgotten?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How to link between these tables and get the bom explosion

tables : mast,stpo,makt
SELECT AMATNR BMAKTX CIDNRK CMENGE C~MEINS INTO CORRESPONDING FIELDS OF TABLE IT_COMP_IDEL FROM
                   MAST AS A INNER JOIN MAKT AS B ON AMATNR = BMATNR
                             INNER JOIN STPO AS C ON ASTLNR = CSTLNR
                   WHERE AMATNR IN S_MATNR AND AWERKS IN S_WERKS.
using cs13 to get the bom summary
using these table to but i got only few materials only,
but cs13 got more materials
how can i solve that one
Regards
ds

Hi,
Just go through this program i think it will help u out.
TABLES: MARA, MARC.
TYPE-POOLS : fibs,stree.
TYPES: BEGIN OF STRUCT_BOM,
        MATNR TYPE MATNR,          " Material Number
        WERKS TYPE WERKS_D,        " Plant
        IDNRK TYPE IDNRK,          " BOM Item
        STLAL TYPE STLAL,          " Alternative BOM
        STUFE TYPE HISTU,          " BOM Level
        OJTXB TYPE OJTXB,          " Object description (assembly)
       END OF STRUCT_BOM.
*- table types
types: t_bom type table of struct_bom.
*Internal Tables to hold the BOM data.
DATA: ITAB_BOM type table of STRUCT_BOM.
DATA: WA_BOM TYPE STRUCT_BOM,
      wa_stb type stpox,
      wa_matcat type stpox.
DATA: IT_STB       type standard table of STPOX,
      IT_STBC      type standard table of STPOX,
      IT_MATCAT    type standard table of CSCMAT.
*-- to enter BOM DATA
*Selection Options
select-options: s_matnr for V_matnr,       "BOM Material
                s_plant for V_werks.       "BOM Plant
*Input Parameters
parameters:     p_alter type stko-stlal,      "Alternate BOM
                p_usage type stzu-stlan,      "BOM usage
                p_appli type tc04-capid,      "BOM Application
                P_CATE TYPE STKO-STLTY DEFAULT 'M'.      "BOM Category
INITIALIZATION.
REFRESH ITAB_BOM.
CLEAR WA_BOM.
REFRESH IT_STB.
REFRESH IT_MATCAT.
START-OF-SELECTION.
SELECT matnr
       werks
       stlal
       INTO CORRESPONDING FIELDS OF TABLE itab_bom
       FROM mast
       WHERE matnr IN s_matnr
       AND werks IN s_plant
       AND stlan = p_usage
       AND stlal = p_alter.
CLEAR V_MATNR.
CLEAR V_WERKS.
DATA: WA_STB TYPE STPOX,
      WA_MATCAT TYPE CSCMAT.
    v_matnr = wa_bom-matnr.
    v_werks = wa_bom-werks.
    CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
      EXPORTING
        capid                 = p_appli
        datuv                 = sy-datum
        mktls                 = 'X'
        mehrs                 = 'X'
        mtnrv                 = v_matnr
        stlal                 = p_alter
        stlan                 = p_usage
        werks                 = v_werks
      TABLES
        stb                   = it_stb
        matcat                = it_matcat
      EXCEPTIONS
        alt_not_found         = 1
        call_invalid          = 2
        material_not_found    = 3
        missing_authorization = 4
        no_bom_found          = 5
        no_plant_data         = 6
        no_suitable_bom_found = 7
        conversion_error      = 8
        OTHERS                = 9.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
Then just print whatever data u want it_stb, it_matcat tables.
reward points if u find my answer helpfull.

My iPhone was stolen last night and I'm trying to recover all my photos from that phone and get them on my mac laptop. The iCloud photo stream only imported 1,000 photos from my stolen phone. How can I retrieve all of my other photos?

my iPhone was stolen last night and I'm trying to recover all my photos from that phone and get them on my mac laptop. The iCloud photo stream only imported 1,000 photos from my stolen phone. How can I retrieve all of my other photos?

You have to reset the device to Factory Settings in order to restore it from an iCloud backup. You probably want to back it up as is before you do this.
To do the reset after you have backed up the current device, go to Settings>Reset>Reset all Content & Settings. This will erase the device. If you are signed onto iCloud with Find My iPhone turned on, go to Settings>iCloud and scroll to the bottom to sign out of iCloud before you do the reset.
Once you have reset your device, you will set it up like a new phone. When it asks if you want to restore it from an iCloud backup, select the backup you want to restore it from.
Cheers,
GB

How to get STPOV structure values using BOM number and Plant number

hello All,
could you please help me out
'How to get STPOV structure values using BOM number and Plant number'
is there any function module where can i give input as bom and plant number .
waiting for your response.
regards
srinivas

I did a quick where-used lookup in SE11 on the structure STPOV in function module interfaces and came up with the following:
Function Module                             Short Description
CK_F_TOTALCOST_COMPUTE
CS_ALT_SELECT_COUPLED_PRODUCT
CS_WHERE_USED_CLA                Bills of material; class use
CS_WHERE_USED_CLA_ANY        Bills of material; direct class use or via other class
CS_WHERE_USED_CLA_VIA_CLA        Bills of material; class use via classes
CS_WHERE_USED_COP
CS_WHERE_USED_DOC                Bills of material; document use
CS_WHERE_USED_DOC_ANY:Bills of material; direct and (indirectly) document use via
CS_WHERE_USED_DOC_VIA_CLA        Bills of material; document use via classes
CS_WHERE_USED_KNO                Bills of material; use object dependency
CS_WHERE_USED_MAT                Bills of material; where-used list
CS_WHERE_USED_MAT_ANY:Bills of material; where-used list as article or class item
CS_WHERE_USED_MAT_VIA_CLA        Bills of material; where-used list via classes
EXIT_SAPMC29M_001                BOM; Article Where-Used List
It appears that this structure is primarily used for where-used look-ups for components within the BOM. I don't know if any of these are what you're in need of.
Hope this helps,
Mark Schwendinger

Retrieving songs purchased on lost itouch and getting them on itunes.

I purchased a lot of songs on my itouch and since i lost it last week, i have no way of syncing them onto my itunes. Is there anyway to retrieve the songs i purchased on my itouch and get them on my itunes or am i just screwed and have to re-buy everything?
pllleaasseee help :]
And if this question has already been answered can someone link me to it because i can't find it anywhere.
Thank you soo much in advance if anyone can help.

I literally just figured out how to fix this a second ago, and believe me I thought I was hopeless, but it's relatively simple and I really hope it works for you.
Okay, so open up your iTunes on your computer (make sure your iPhone is already connected to your computer), and under Library, click on Music.
Now, go through your entire music library, and delete every single greyed-out song.
Once you're finished that, under devices, you'll see your iPhone's name or whatever. Right-click that. And go down to Transfer Purchases.
Basically, because you deleted all the greyed-out songs, it'll completely re-do the process. And hopefully, do it correctly this time.
I really hope this helps. This has been bugging me forever, and I'm pretty Mac-savvy, so I can't believe it took me this long to figure this out!

I had upgraded to firefox 3.0 years ago and lost my firefox 2.0 bookmarks. How do I retrieve them? I keep getting only one bookmark from the html file.

Years back I had installed Firefox 3.0 (at launch, so not beta) into a separate program folder. After installation, I expected to have my bookmarks saved. Recently I found out my bookmarks were in application data and I found out I had one profile. That meant that my firefox 2.0 bookmarks were replaced.
I read up on the FAQs and it stated that bookmark backups only save the previous 5 days or so, so I don't think they are usable though I have them saved. The bookmarks.html file in my profile shows only one bookmark after importing it into firefox 3.5 and firefox 2.0 (downgraded back to check it out), google chrome, and internet explorer. I still have the bookmarks.bak and bookmarks.html.bak files as well.
A little backstory before I got up to this point because it's a bit convoluted because I thought I could retrieve them like IE favorites which were easy:
1) Switched to Firefox 2.0 from Internet Explorer and got several hundred bookmarks.
2) Got HyperBookmarks add-on which bugged up and replaced my previous bookmarks folder though it stated in FAQs that my original Firefox 2.0 bookmarks were in a separate folder so I didn't worry about it.
3) Upgraded to Firefox 3.0 and it replaced all my bookmarks with nothing in bookmarks list. I thought it was saved because I installed Firefox 3.0 in a separate folder.
4) Retrieved 3.0 Bookmarks and Archived them, but wasn't able to find Firefox 2.0 Bookmarks (original) nor the HyperBK version, except in HyperBk Backups folder.

In the "Edit this Bookmark" window, use the 2nd drop-down button, that is to the right of the "Folder", to open a larger window that will allow more folder to appear. See the sloppy red arrow on the screenshot below.

TS2776 Hello. I attempted to sync my iPhone this morning and get updates. I can no longer access anything on it now. No contacts, no phone (emergency only), no apps, etc. Its a grey screen that simply says iPhone. What happened and how do I retrieve ever

Hello, I attempted to sync my iPhone and get updates. Something went wrong. There is now only a grey screen that simply displays "iPhone" and then leads me to Location services to either enable or disable or to choosing a WiFi network. I have a MIFI, but cannot rememer the password. How do I get back to my phone (I can only make an emergency call), my apps, and all else? Please help!

Sounds like you restored your phone as new. If you follow all the steps, there a section that allows you to restore from a backup either through icloud or itunes.
You do have a backup of your phone right? If you don't then all is gone, but you can sync back your apps and music.

BOM Header and BOM Item Enhancements

Hi all,
I just want to make sure I got this correct so far and looking for further info. I have some z-fields(custom fields) that I'm adding to CI_STKO (BOM Header) and CI_STPO (BOM ITEM). I need to be able to display these fields in transactions CS02,CS03,CS11,CS12,CS13. I think I'm suppose to use the following enhancements:
PCSD0003 : BOMs: Customer fields in header
PCSD0002 : BOMs: Customer fields in item
Can anyone give me some info on the screen exits in these enhancements if this is correct and if not can someone give me some guidence to displaying the z-fields in these transaction?
Message was edited by:
Akeem Lockett

You will have to make all the modifications inside the function group XCSA.
You wiill get the necessary exits there.
For displaying the custom fields you can use the screens 701 to 721. These are subscreens for displaying the item details. The moment you make changes here in these screens , you will be able to see the effect in CS01/02/03.
Hope it helps.

BOM Component and quantity like cs03

Hi friends,
I want output like cs03 i want component list and its quantity which r use for perticular material as like in CS03.
Means I just give material no in input for that perticular material number in output it display components which are used for that perticular material and its quantity,plan.
I don't know PP tables and link between them so plz give me tables name and related llink so i can get output in SQVI OR REPORT.
Thanks in Advance.

Dear Prashant,
Dear First check with T codes CS11,CS12,CS13.
But if you are planning to make use of tables for creating a query then
Using the Following tables,you can create a simple query and get the necessary
details.
STPO         BOM Item Details
STKO           BOM Header Details
MAST         BOM Group to Material.
Regards
Mangal

Memory Problem with SEt and GET parameter

hi,
I m doing exits. I have one exit for importing and another one for changing parameter.
SET PARAMETER exit code is ....
*data:v_nba like eban-bsart,
       v_nbc like eban-bsart,
       v_nbo like eban-bsart.
       v_nbc = 'CAPX'.
       v_nbo = 'OPEX'.
       v_nba = 'OVH'.
if im_data_new-werks is initial.
if im_data_new-knttp is initial.
    if im_data_new-bsart = 'NBC' or im_data_new-bsart = 'SERC' or im_data_new-bsart = 'SERI'
       or im_data_new-bsart = 'SER' or im_data_new-bsart = 'SERM' or im_data_new-bsart = 'NBI'.
      set parameter id 'ZC1' field v_nbc.
    elseif im_data_new-bsart = 'NBO' or im_data_new-bsart = 'NBM' or im_data_new-bsart = 'SERO'.
      set parameter id 'ZC2' field v_nbo.
    elseif im_data_new-bsart = 'NBA' or im_data_new-bsart = 'SERA'.
      set parameter id 'ZC3' field v_nba.
    endif.
endif.
endif. *
and GET PARAMETER CODE IS....
get parameter id 'ZC1' field c_fmderive-fund.
get parameter id 'ZC2' field c_fmderive-fund.
get parameter id 'ZC3' field c_fmderive-fund.
FREE MEMORY ID 'ZC1'.
FREE MEMORY ID 'ZC2'.
   FREE MEMORY ID 'ZC3'.
In this code i m facing memory problem.
It is not refreshing the memory every time.
So plz give me proper solution.
Its urgent.
Thanks
Ranveer

Hi,
   I suppose you are trying to store some particular value in memory in one program and then retieve it in another.
If so try using EXPORT data TO MEMORY ID 'ZC1'. and IMPORT data FROM MEMORY ID 'ZC1'.
To use SET PARAMETER/GET PARAMETER the specified parameter name should be in table TPARA. Which I don't think is there in your case.
Sample Code :
Data declarations for the function codes to be transferred
DATA : v_first TYPE syucomm,
       v_second TYPE syucomm.
CONSTANTS : c_memid TYPE char10 VALUE 'ZCCBPR1'.
Move the function codes to the program varaibles
v_first = gv_bdt_fcode.
v_second = sy-ucomm.
Export the function codes to Memory ID
EXPORT v_first
       v_second TO MEMORY ID c_memid.        "ZCCBPR1 --- Here you are sending the values to memory
Then retrieve it.
Retrieve the function codes from the Memory ID
IMPORT v_first TO v_fcode_1
         v_second TO v_fcode_2
FROM MEMORY ID c_memid.                                   "ZCCBPR1
FREE MEMORY ID c_memid.                                   "ZCCBPR1
After reading the values from memory ID free them your problem should be solved.
Thanks
Barada
Edited by: Baradakanta Swain on May 27, 2008 10:20 AM

Set and get parameter id

Hi,
I need to store one variable value and I need to retrieve the same variable value in same program. For this I have written set and get parameter ids in the same program. It is working fine but if I log off the system and if I logon the system it is not working I mean before log off the variable is showing some value if I log on again that variable is showing empty. But I want to capture the field values after log off and log on also. Is there any other option can I use table?
Please help me I will give points.
Thanks.

Hi
SAP memory is a memory area to which all main sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters can be set either for a particular user or for a particular program using the SET PARAMETER statement. Other ABAP programs can then retrieve the set parameters using the GET PARAMETER statement. The most frequent use of SPA/GPA parameters is to fill input fields on screens
SAP global memory retains field value through out session.
set parameter id 'MAT' field v_matnr.
get parameter id 'MAT' field v_matnr.
They are stored in table <b>TPARA</b>.
ABAP memory is a memory area that all ABAP programs within the same internal session can access using the EXPORT and IMPORT statements. Data within this area remains intact during a whole sequence of program calls. To pass data
to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse.
ABAP memory is temporary and values are retained in same LUW.
export itab to memory id 'TEST'.
import itab from memory Id 'TEST'.
Here itab should be declared of same type and length.
http://www.sap-img.com/abap/difference-between-sap-and-abap-memory.htm
ABAP Memmory & SAP Memmory
http://www.sap-img.com/abap/difference-between-sap-and-abap-memory.htm
http://www.sap-img.com/abap/type-and-uses-of-lock-objects-in-sap.htm
Regards
Anji

Set and get values with vector

I have a class that that querys a db and sets a value of the result to a vector array. Is it possible to set and retrieve that vector array using the set and get methods?
ex:
my class:
sql = "Select ...";
Vector fName = new Vector();
rs = sqlStatement.executeQuery(sql);
if (rs != null) {
while (rs.next()) {
fName.add(rs.getString("fName") + "");
rs.close();
setFName(fName);
how would I set up the set and get methods???
thanks

I am unsure of what you are asking:
A Vector has set and get methods for it, you use indexes of the array to say what element you want to work with.
If you are asking how do you know what elements of the Vector contain which data columns, you have to remember how you put them in.
If you are asking if you can use set to load the Vector: then NO, you have to have elemenets already there to change, use the add method.
If you are asking how to access the elements of the Vector you use an Enumeration:
for(java.util.Enumeration e = v.elements(); e.hasMoreElements();){
s = (java.lang.String) e.nextElement();
vl.add(s.substring(0, 12));
If you are asking something else: please elaborate what you want--my brain may not be very functional this morning.

My iphone 4 will not charge or connect to a charger so cannot connect to itunes or be plugged in..how do I back up my pics and get them?

A few days ago my phone decided it would only charge when it was shut off or on a car charger...from what I have read it sounds like it is some chip possibly because they tried changing my charging port and it did nothing. My main concern right now is more about the 1100 pictures I have on there and getting them off. My 3 months old entire 3 months of life are on that camera and my photo stream is only showing 59 photos. How do I either get my pics into my photo stream or somewhere I can retrieve them with out emailing 1100 pictures. The place I went gave me a fully charged battery to try and get everything off my camera and I tried everything before it died. I tried backing it up and it kept failing? I tried sharing all of the pictures on icloud and still cannot see them anywhere. I am slightly freaking out here and hesitant to get it fixed with out getting pictures off it just in case something went wrong and they all got deleted or something and I honestlyl really do not want to pay a bunch to fix it because we are upgrading in a few months. Any help will be greatly appreciated because I will die if I lose those picutes.

Hello!
i know a place where they can look at your phone. It's call DoctorApple. i went there to repair my phone. this is their phone number : 514 234-2851

FM to retrieve Summarized BOM (CS13) and get TOP parent

Similar Messages

Maybe you are looking for