Fm transmition problem when guitar plugged in garage Band !

hello,
i m having a curious problem when i plug my guitar in GB, i interfere with a Turkish radio ... it's like my guitar is an antenna and i don't know where it comes from... so when i play, i have a radio as background sound... and when i cut my volumes from the radio it is still playing on the background ...
can anyone help me ??
THANKS !

my first suspect would be the guitar cable. make sure you're using good quality shielded cable.

Similar Messages

I am having a problem when I plug my iPod into my macbook. When I plug the cable into my mac I get the following message - "Because a USB device was drawing too much power from your computer, your USB device has been disabled." PLEASE HELP!

I am having a problem when I plug my iPod into my macbook. When I plug the cable into my mac I get the following message - "Because a USB device was drawing too much power from your computer, your USB device has been disabled." CAN SOMEONE PLEASE HELP!

The rest of the message in the pop up window says "To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may have also been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again."

I can't find a plug in that i downloaded and put in the library/audio file when I'm in garage band

I can't find a plug in that i downloaded and put in the library/audio file when I'm in garage band?

In GarageBand 10.0 and GarageBand '11 are the plugins (Audio Units) installed in
/Library/Audio/Plug-Ins/Components/
What is the GarageBand version? Not all plug-ins are compatible with the newest version GarageBand 10.0
The version number is shown in the "About panel" in the main menu bar: GarageBand > About GarageBand
If you are having the newest GarageBand 10.0, the Audio Units will show in the panel in the Smart Controls of the Track you selected.
Scroll the "Info" pane down all the way or enlarge the Smart Controls pane by dragging the dividing line to the track area upward, until you see theAudio Unit Brick.
Most panes in GarageBand 10.0 can be scrolled. If you do not see the scroll bars, they will appear automatically, when yous start scrolling. Or enable them permanently in the System Preferences > General > Scroll Bars. This is useful, as long as you do not know yet, which panes have hidden items that will need scrolling, to make them visible.
The Smart Controls need to be enabled in GarageBand Preferences >Audio Midi.
Some Audio Unit plug-ins will no longer work, since the new GarageBand 10.0 is a 64-bit only application; the 32-bit plug-ins are incompatible.
See this document: GarageBand for Mac (v10.0): Unexpected behavior with Audio Units plug-ins

HT1414 I am going through the process of unlocking my iphone 4 and have had all the go aheads from my service provider but i am still having problems when i plug the phone into itunes. Has anyone else had this program

I am going through the process of unlocking my iphone 4 and have had all the go aheads from my service provider but i am still having problems when i plug the phone into itunes. Has anyone else had this problem??

Umm, what problem? What actually happens when you try to restore it in iTunes?

Guitar recording in Garage Band, 2012 MacBook Pro 13"

I hope someone can point me in the right direction here...
I bought a brand new 2012, 13", MacBook Pro a few days ago for a number of reasons, but the main being music recording. After purchasing I realized there is no LINE-IN on the new MacBook?! I browsed a few forums to find that others are having the same issue I am.
I decided to buy a chord called a Lightsnake, that is a 1/4" guitar jack on one end, and USB on the other. However, there is a slight delay between when I pluck a string, to the audio coming through my headphones. It makes the chord unusable because I can never layer tracks perfectly.
Does anyone know of another solution that isn't going to run me a few hundred dollars that will allow me to record my guitar into Garage Band? I'm still within the 30-day return policy, and if I cannot find a reasonable solution I'm going to have to upgrade to the 15" MacBook Pro, which comes with the line-in?! (Which is a whole separate annoyance for another forum post)
Please Help!! This is my first MacBook after being a Windows user forever, and I'm already questioning my decision.
Thanks in advance for any help.

First of all, let me welcome you to the Apple world, where the grass is always greener on this side. Don't question your decision, you made the right choice.
Regarding your question:
Solution 1: external
You can use an external audio interface via the USB bus. There are plenty to choose from in any price range. The more expensive ones provide a lower "latency" and I think that is the problem with your cheaper Lightsnake device. It has a built-in analog-digital converter in it and that must be not that good of a quality which introduces such a high latency (the time needed to do the digital conversion) that you can hear it.
Solution 2:
It seems that many users are not aware that the newer MacBooks have a "double duty" audio port. Unfortunately, it is labeled with a headphone icon which points to an "audio out". However, this port can be used as ad audio out (Sound Output) or audio in (Sound Input). You set that in the System Preferences > Sound window
With a 1/4" to 1/8" cable, you could connect your electric guitar directly into your Mac. Check the input level meter in the System Preferences if your guitar signal (or other audio signal) is high enough. Although the quality might not be the best (compared to a good external Audio Interface), I would bet that the analog-digital converter (ADC) are better that your Lightsnake cable, resulting in a much lower latency
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Sample Rate Problems going from Logic to Garage Band

I've downloaded the Trial Version of Logic Express. When it launched it changes the i/o sample Rate that is required by Garage Band (I'm using a digi002 i/o). The result is that garage band plays back at a fraction of it normal rate (sounds like crap).
It wasn't a problem until the trial ran out on Logic Express. I could change the sample rate back inside Logic. Hummm ... what to do? I don't see any place to change the rate in the garage band preferences or in the core audio interface. Any suggestions would be appreciated.
G4 1.25 dual, mirror Mac OS X (10.4.6)
G4 1.25 dual, mirror Mac OS X (10.3.9)

updated

Upright bass player help with plug into garage band

i want to be able to plug my upright bass into garage band and play with piano i select, and recorde to
cd is this possible
mr bass player

mr bass player wrote:
is this possible
no, i'm afraid you can not play GB's pianos with your upright bass, you need a MIDI controller

HT4710 Where do I find previously purchased guitar lessons on Garage Band?

I've just tried to redownload a previously purchased lesson from within an updated Garage Band.
It did aknowledge that I had already purchased the item/lesson and, as it usualy did with the songs from iTunes a few months ago (just before iCloud), it asked me if I wanted to repurchase the item.
As I had no other visible way of redownloading the lesson I pressed the ok button.
The problem is that, afterwards, it did, in fact, charge my credit card for this redownload. As a matter of fact it did charge my credit card twice since I did click the button a second time few seconds after, as I wasn't sure that everything was right.
So now, I've paied 3 times for the same lesson:
- 1st one, the 9th of January of 2010.
- 2nd and 3rd, the 11th of August of 2012.
Does anyone know how can I redownload all the lessons I've purchased back in 2010?
Since I've updated to the latest version of Garage Band (sold through the App Store) I've lost all of them. What can I do?
I know Apple aknowledges the sell of those (anyway I have the invoices), but I can't find any of those applestore purchases I've made prior to the last 18 months (I'm refering to my Apple Store Account > Orders page)
And since now we don't have Express Lane anymore I'm in a deathend!
Thanks in advance for any help!

Have you already tried this?
GarageBand: Re-downloading Learn to Play Artist Lessons
To download a purchased Learn to Play Artist Lesson again later:
Log in to your Apple Store account and vIew your order history.
Click any lesson to download it again.
For me this worked beautifully. After signing into the account and viewing the Order history, I found Sting waiting for me to download again.

I recently submitted a question re. the volume which when I send from Garage Band 2008

I recently submitted a question re. sharing music I create and send from Garage Band 2008 to iTunes 11.1.1. I create a slide show in iPhoto 2008 and export to Quicktime (latest version) and ultimately to YouTube. By the time the file gets to Quicktime, the volume has defaulted to a low level which is unacceptable. This never happened until I recently upgraded to Snow Leopard. How can I keep the volume? Must I update all of my iLife software?

export the exact length:
http://www.bulletsandbones.com/GB/GBFAQ.html#exportexactlength
(Let the page FULLY load. The link to your answer is at the top of your screen)

Problem when atualization plug-in

Good mornig,
What can I do when the last box dialog didn't open and the message "only one instance of this aplication can be executed" is showed?

What is your operating system & version?
What is your web browser?

Hooking An Electric Guitar up to Garage Band 3 on Intel iMac

This question probably seems a little basic, but this is my first mac since the Mac 128's and I'm not sure where I'm going wrong here.
So basically, I want to hook my Floyd Rose electric guitar up to my intel duo core iMac for the first time. This is something I've done in the windows based world forever - and I figured it would be just as easy if not easier on the mac. No luck so far.
So here's what I've tried:
First: Installed my M-audio JamLab and tried plugging the guitar through it. Everything installed ok, but then the control panel icon for the jamlab tells me it can't open with my current version of MacOs, and selecting the jamlab as an audio input in garageband preferences doesn't give me anything. After a bit of research, I'm guessing this is just the fact that m-audio hasn't updated their jamlab driver for the intel macs yet.
Ok ... next:
Tried running through my PodXT Live into the mac. Same problem - no updated intel driver yet and the current one doesn't seem to work.
Ok, lets try the low-tech solution:
I plug the guitar into a 1/4" to 1/8" stereo to stereo adapted ( even though the guitar is mono - its all I had ) - I then plugged it into the line in jack. Again nothing.
So the question is - what can I do to plug my guitar into my intel Imac at the moment? I noticed that maudio has some devices with beta drivers - do those work?
As for plugging the guitar straight into the computer - I also noticed that standard 1/8" jacks seem to be too long to fit into the mac's line in and line out jacks ( or maybe they would fit if I pushed them in really hard - but I didn't want to risk it ). Would I need an audio preamp to do this? Would the guitar cable on apple's store work any better?
I'd prefer to go with the USB solution if possible - but so far 2/2 mainstream devices didn't have working drivers.
Any advice?
I thank you!
Nick
iMac 17" Intel Dual Core. 1.5Gig ram Mac OS X (10.4.5) Korg Micro Kontrol

If you want to go the USB or FireWire route, you need to check with manufacturers to make sure they have updated drivers.
To effectively use the Line-In you need a preamp of some kind. Some folks have used effects boxes/pedals.
BTW, the 1/8" plug should fit in the jack, there's nothnig special about the jack that I know of.
Finally to use the Line-In:
http://thehangtime.com/gb/gbfaq2.html#recordlinein
--HangTime [Will Compute for Food] B-|>

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

Macbook Pro way too loud when headphones plugged

Hi
I've always had this problem, when I plug in any type of headphones, I must lower the volume to one - max two - "blocs" of volume, otherwise my head explodes. I unplug them, and I have normal volume range with the external speakers.
Anyone has that problem too??
thanks

Anthony,
Have you learned anything more about this problem? I have the exact same issue. Headphones that work fine on an older Macbook Pro are deafening on the new (Mar. 2008) model.
I haven't had time to go down to an Apple store and see if it is the same on all machines.
Eric

USB cannot recognize the device when i plugged my ...

Hello there
I have a problem when i plugged my n95 to the computer, the USB doesn't recognize. Even i tried with settings the device, connect with the PC suite, and also roll back the system in both my computer and n95, tried to connect with another computer but it isn't working also. I posted my problem here because i cannot find anywhere to post, sorry if I posted wrong. And do you have any solutions for me, plz help me.
My device firmware is v30.0.015
Thanks you very much

Next thing then would be to ensure that your camera/USB device is installed correctly. Click here to view Microsoft's web page on this subject. After installing the USB device, restart your computer. See if that doesn't do the trick. If not, we can go from there.

Speaker's sound doesn't decrease completely when I plug a earphone in front of my case

Hello,
I own a X-Fi Xtrem audio (PCI version) and Windows 7 and I have a little problem.
I recently put back my sound card in my pc (I stored it few month, the last time I used it, it worked well).
Here is the problem : When I plug a earphone in front of the case, I can hear that the speaker's sound is decreasing a little, so there is a hardware detection, but normally the sound of my speaker should stop completely... (with on chip audio device, it's ok)
Did you ever heard of this sort of issue?
I guess there is a component on my sound card that doesn't make is whole work.
I bought my X-Fi in 11/27/2010, guess it is not under "builder" guarantee anymore?
Thank's

durden77 wrote:
If I do go get a USB mic, will I be able to make it work that way?
yes, you could create an aggregate device with the line-IN and USB mic. here's one for under $20:
http://astore.amazon.com/bulletsandbon-20/detail/B002RL84OY

Fm transmition problem when guitar plugged in garage Band !

Similar Messages

Maybe you are looking for