FM Transmitter Quest

I was wanting some input on the FM transmitter for the Micro. On Creative's Accessory page, they show the transmitter along side the Micro just sitting on the dash of a vehicle. How do these sit on the dash? Don't they slide off? Has anyone had any experience with this unit and do you like it's Pros/Cons please. Just wondered if there were any problems. My friend has an (shhhhh) iPod and his docks right into the FM transmitter while the transmitter plugs directly into a cigarette lighter. Not a bunch of wires hanging around. That seems a little more practical.
Thanks for your input. Sorry if this has already been covered.
Skee

Duplicate post.

Similar Messages

My Bluetooth USB wireless transmitter for my portable speakers has quit working. Preferences says, "The selected device has no output controls", it used to work just fine. Can anybody help?

My Bluetooth USB wireless transmitter for my portable BT speakers has quit working. Preferences says, "The selected device has no output controls", it used to work just fine. The internal and a pair of wired external speakers work fine. Can anybody help?

Just tested something and it worked.
If I put the headphones all the way in, the mac recognizes it as a digital output.
But if i don't put it all the way in, it recognizes it as headphones and works perfectly.
It's probably this crappy headphones.
If anyone has the same problem, try this out.

My Griffin fm transmitter stoped working with my Ipod Touch.

My Griffin FM transmitter used to work with my IPod Touch but then it suddenly stopped working. A message pops up saying "This Accessory is Not Supported by IPod Touch" but that doesn't make sense since it worked a few hours before hand. The FM Transmitter still works on my IPod classic though, so I don't understand why it suddenly stopped working on my Ipod Touch. If anyone could help I would really appreciate it.

- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Wireless remote control and FM transmitter in one?

Hello.
Does anbody know if there is a wireless remote control and FM transmitter in one product out yet for the iPod? I am wanting to keep my iPod in the trunk of my GoldWing and control it while I ride transmitting through the FM tuner.
Other ideas or a combination of products to accomplish this much appreciated!
thanks
iPod 80 GB Windows XP

I spent some time (2 hrs) again with the vendor, trying to solve the issue.
The only result we got is that, when the PC is in suspended status, it can be resumed by pressing "ON" button of the IR Remote Control. That's all.
My suspect is therefore confirmed: it isn't a hardware issue. It lokks like the IR Remote Controller and the PC can talk eachother, but they speak different languages.
It is quite a surprise that I couldn't find any information on the use (Settings? Activation?) of the remote control, nor in the topics of this forum. Really I'm the only one trying to watch TV on the PC? Are there any users of a C540 who can tell me their experience?
Thank you

Creative, Is it worth it? (i.e. whats your experience with the Zen 16gb) and Firmware questi

After doing a sizable amount of research on the Creative Zen 6gb MP3 player, I was relati'vely comfortable with the product and decided to purchase it.
However, after browsing this forum for a few hours, I see quite a few things that trouble me about Creative in general:
"Real person" my (CENSORED) -horrible customer support
Creative Expects 3rd Quarter Loss, Sells HQ Building?
Message to Daniel_K -lack of product support/customer relations
and a countless number of other posts about hardware and software issues with the Zen
I really like the features built into the MP3 player (FM transmitter, voice recorder, Equalizer) and do not want to sell my soul to Ipod.
That being said, I wanted to see if there was anyone on this forum that actually liked their Zen and did not have issues with it.
I would greatly appreciate your positi've feedback as I hope that I will not have to spend countless more hours searching for and then researching a different MP3 player that fits my needs.
In addition, I was curious about the user interface on the Zen. I know that it uses ID3 tagging and that a folder directory cannot be used to view mp3s on the player (unless this has been added in a firmware update?, however I checked the site and did not see anything about this addition). How impeding is this ID3 tagging reliance if about 00 to 500 of my mp3s have incorrect tagging? as in, will I go crazy trying to retag everything because all I see if "Unknown" for all the data?
Yeah, that's about it for my long winded post...
Thanks,
Joe?

Just return from Mexico and found my Zen 4 GB player missing from a light finger baggage handler. I would not even consider, in a thousand years, of purchasing from the "fruit company" their overprice Ipod without a FM receiver. The Creative Zen rocks. Need I say more.

I upgraded from a 1st generation to the 4th generation Time capsule Model A1409. Since then I am getting interference on my wireless transmitter that sends signals from my Pay TV box to another TV downstairs. Is it the dual frequency and how do I stop i

I upgraded from a 1st generation to a 4th generation time capsule (model A4109) and since then my pay TV wireless transmitter has pulsating interference. This is obviously due to the new dual band frequency of the TC. Is there any way I can set it to one band and what will that do?

Go in and manually set the wireless channel for 2.4ghz or 5ghz (whichever your av sender is).. try different channels.

Can not Update icloud for win7 Sheep error during transformation. check that the indicated transmitter propagating path is valid. tryet in appel updater and tryet downloading from apple but the same

Can not Update icloud for win7 Gets
Sheep error during transformation. check that the indicated transmitter propagating path is valid.
tryet in appel updater and tryet downloading from apple but the same

Hi,
Found a note explaining the significance of these errors.
It says:
"NZE-28862: SSL connection failed
Cause: This error occurred because the peer closed the connection.
Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
Thanks & Regards,
Sindhiya V.

Nano works fine in FM transmitter, but not computer?

Hi All -
I set up my Nano about 3 weeks ago via the USB cord and updated it as recently as Saturday (3 days ago). I bought a new FM transmitter for my car yesterday.
After using my Nano in my FM transmitter, the connection doesn't work via USB to my computer. Has anyone else experienced this?
Dell Dimension Windows XP iPod platform update 6-28-2006

Yes - I did reset it.
FYI - the FM transmitter I purchased ruined the sync connection in my Nano. I consider myself a pretty tech-savvy chick, so I guessed that accessories marketed for our iPods were safe. I was wrong. So will everyone please take note of my mistake?
I bought a transmitter that plugs in where the ear buds go versus the sync connection, along with a new Nano.
Be well!
Dell Dimension Windows XP

Fm transmitter is not working after the Anna upda...

I just updated my N8 to Anna and the Fm transmitter is not working, it's not even opening i can only see the icon but it won't open, also i can't add it as widget ....somebody help me please that's why i bought the N8 and now it's not working
I rebooted my so many time, i even re-installed the ANNA OS , it's not working..
the icon or file name on my phone is "FmTxApp" and it's under the music section

059D160: N8-00 RM-596 Country Variant Hongkong HK Silver White_COLOR
So you have a varient ment for the Hong Kong market,
Might be wrong but I think these may have the FM software disabled,
Likely whoever sold you yours flashed the local software to the device, but left the product code unchanged,
When you updated to anna, your phone picked up the Chinese variant firmware and the FM was again disabled
Your options
1) Take it to a nokia care point and ask them to flash woth the local firmware and change your product code, there may be a charge for this and they may refuse to do it
2) go back to the retailer you bought it from and see what he can do
Any other methods you may spot on the web about fixing this issue with hong kong variant phones cannot be discussed here as there use voids the phones warenty

FM transmitter won't work with my iPhone

I bought a Premier FM transmitter from Auto Zone the other day. It has a 30-pin connector with an led panel that lights up when you connect it to an apple device. It's suppose to work with all 30-pin devices but doesn't work with my iPhone 4 (iOS 7.1.2). I have tried it with my iPod Touch 2g and two other iPhone 4's that belonged to my friends, and it worked with all three devices. Any explanation why it won't work with mine?

"the Middle East" is a really big place. I suspect you bought a gray market hacked phone. Call Apple Care and give them the serial number. Maybe they can tell you if it's locked and to what carrier.

How do you find out if the transmitter and/or receiver leaves the session ?

So , how do you find out if the transmitter and/or a receiver leaves the session , is there an event when this happens ?

1. There is no list available from your end.
2. You can't actually check. If you suspect a device has been, deauthorize it twice and then authorize it.
(89509)

FM transmitter in N86 doesn't work

Hello,
After I sent my handset to Nokia Care, and after changing my handset ny a new one, I found that the FM transmitter doesn't work at all!
When I try ro activate it, it prompts me to activate, and when I select yes, nothing happens and the FM transmitter remains deactivated.
I tried restoring factory settings but it didn't help.
Should I send it back to nokia care?
Thanks in advance.

i experienced the same thing after i sent my phone to nokia care for repair. so i decided to search online about the problem. i saw from the nokia forum that u can fix it by:
Set ur Standby Themes to horizontal icon bar again and OFF the phone .
On it Back , everything will be ok ! The FM can be use again.
but i don't know if the problem will reoccur again.

N97 Fm transmitter BUG

Hello i'm the owner of a nokia n97,laster sofware version 21.0.0.045v.I can't activate the fm transmitter.I selecte it and it asks me if i want to activate it (yes/no )but i select yes and nothing i mean nothing happens it just stays turned off
is it a bug? Thank's for reply
Ce traiesc eu intr-un e46 330ci in cateva minute nu traiesc altii intr-o viata intreaga

It's a pain to do, but it's often advisable to reset the phone after a software upgrade, as there could be conflict between the settings you had on the previous software and the new version !
If you decide to do it, backup your contacts, calendar and notes ONLY, dial *#7370# followed by 12345 and the phone will reset, you will need to set it up as though it was a new phone, and it should resolve your problem, if the FM transmitter still fails to work it may be a hardware issue and you will need a care centre. I have an N97 on the same firmware and it works fine !
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

How to get the groups a computer is member of in AD with Quest Powershell?

Hi all
I would need a script in Quest PowerShell that gathers the groups that multiple computers are member of in Active Directory. I have this script, but what it does is to get USERNAMES from a .txt file and then display the groups
each user is member of in AD. I couldn't modified it so instead of USERNAMES in the txt file I can put computers name, here's the code:
$out = @()
Get-Content M:\Tools\Reportes_Power_Shell\Contenedor_Power_Shell\Users.txt | ForEach {
$date = (Get-Date).ToString()
$username = $_
$displayName = (Get-QADUser $username -Properties DisplayName).DisplayName
$groups = Get-QADMemberOf $username | Sort-Object Name
ForEach ( $group in $groups ) {
$obj = New-Object -TypeName PSObject
$obj | Add-Member -MemberType NoteProperty -Name Date -Value $date
$obj | Add-Member -MemberType NoteProperty -Name UserName -Value $username
$obj | Add-Member -MemberType NoteProperty -Name DisplayName -Value $displayName
$obj | Add-Member -MemberType NoteProperty -Name GroupName -Value $group.name
$out += $obj
$out | Export-CSV M:\Tools\Reportes_Power_Shell\Reportes_de_Power_Shell_y_AD_Info\Users_Memberships.csv
Thanks!

I did it but didn't work out, I get this error:
Get-QADMemberOf : Ambiguous identity: <NAME OF THE COMPUTER>.
At line:5 char:30
+     $groups = Get-QADMemberOf <<<< $username | Sort-Object Name
    + CategoryInfo          : NotSpecified: (:) [Get-QADMemberOf], IdentityException
    + FullyQualifiedErrorId : Quest.ActiveRoles.ArsPowerShellSnapIn.BusinessLogic.IdentityException,Quest.ActiveRoles.
   ArsPowerShellSnapIn.Powershell.Cmdlets.GetMemberOfCmdlet
I can't help with Quest, but here's an example using the AD module:
Get-Content .\computerList.txt | ForEach {
$computerName = $_
$props = @{
ComputerName = $computerName
Groups = ''
try {
$details = Get-ADComputer $computerName -Properties memberOf -ErrorAction Stop
$props.Groups = (($details.memberOf | ForEach { (Get-ADGroup $_).Name }) | Sort) -join ','
} catch {
$props.Groups = 'ERROR'
New-Object PsObject -Property $props
} | Select ComputerName,Groups | Export-Csv .\GroupList.csv -NoTypeInformation
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

N 97 FM Transmitter PROBLEM WITH CHARGER / QUALITY...

Helllo. got my RM 505 FW 11 with several problems concerning the built-in FM Transmitter.
When used under UMTS 3G EPLUS with LCG Jukebox 2.41 the Transmit Power seems to Low.
I tested it with freq. 88.30 , 88.60 ,96.00 and 107.00 for example.
Always i got crackling noise and interferences .
But when i plug my Nokia USB Charger to the Device , FM Transmitting is nearly impossible.
to the point the batteries recharging the amount of FM send power is very low. but when i plug off the charger ,
the quality is much better , but far away from a good result. i noticed that whenever i touch phones metal frame , the quality rises , but when i left phone alone quality falls down to hell.
i compared it with my nokia N86 8MP but there is NO problem with or without connectet USB Charger so
i guess maybe it is a hardware fault of my device ?????
Could anyone be so kind and check his N97 with and without USB Charger in car while transmitting MP3 to radio ??
Thx a Lot !
Thom.

R

FM Transmitter Quest

Similar Messages

Maybe you are looking for