FM06PF01_POS_ZUSATZDATEN Changed by which package in ECC 6.0
Dear all,
Our system upgrades from 4.6C to ECC 6.0, and we have done some customized development for PO Print in 4.6C.
After upgrading to ECC 6.0, the PO print doesn't work. Because the customized program uses the include FM06PF01_POS_ZUSATZDATEN, and a statment
Perform retail_reference_site
are added in ECC 6.0, but it doesn't exist in 4.6C.
I think there is a supported package which has deleted this statement in 4.6C, could you tell me the same function package for ECC 6.0?
Any suggestion will be appreciated.
have you installed IS_Retail on 4.6C?
have you added this add-on while upgrading?
Similar Messages
-
I have posted in Mac pro Eplehust and Oslo in early June to change videokart (which has changed six months ago) got my Mac a month by mail, with the terrible damage the body, but the packaging in which he lay was not damaged. I sent him back to change the computer, 4 weeks, I changed it and checked 2 more weeks. as a result of three days ago, got back, more than half the programs crash, I can not open or closed CDrom, some programs do not come off or stop, and stop responding commands, turn it off only mechanically, not any excuses, I did not get to the store, what should I do?
My patience is crowded, nerves on edge, I have lost my time with the worst service of my life, the only thing I see its the draw Eplehuset and apple to court.
my e-mail - [email protected]While writing I made a mistake... It is true I could become aware of the Scorpio incompatibility.
I also tried the same identical procedure with a Seagate one. This disk and the same procedure was performed by some people I know on many MacBookPro Mid-2010 and everything was OK.
We do not understand why this problenm occurs.
Furthermore, If I installed the system on the broken HDD (that works, but sometimes it fails so badly and makes the system experience kernel panic) I could boot from it.
I guess it is because of the **** Apple FIrmware written on the label.
Is it possible that I cannot manage to boot from my new HDD because it has not a "special" feature on it that makes it compatible with apple??? Why making things so **** difficult my god a closer world like Apple one is impossible to imagine.
However Shootist007 thanks for your message, but given what I said I do not think is a cable problem. -
Limit PO price changes are not replicated to ECC backend
Hi all,
SRM 5.0 ECS SP13.
When I change the value(increase/decrease) in limt PO which is already created(PO is changed for first time) and order the PO,under Overview screen.,the PO total value(at header level) shows the correct changed /new value while at the Item level,the Net price is shown as the old value!However when I go and check the item details,the field "VALUE" and "EXPECTED VALUE" have the changed/new value.
Because of the above issue,the PO changes are not replicated to ECC backend system.When I tested the BAPI BAPI_PO_CHANGE1 with the test data,there is no error mesasge in ECC backend system.
After this,when I change the PO for second time(again value increase/descrease),the total value and net price is shown correctly in SRM and changes are also replicated to ECC backend system!
I have also checked the cong for SPOOLPARAMETERS under Set Control Parameters and eveything is set correctly as shown below
SPOOL_JOB_USER User that execueds spool job. CUA_ADMIN
SPOOL_LEAD_INTERVAL intervall by which the retrytime incr. 60
SPOOL_MAX_RETRY Max. number of retrys for writing BAPIS 10
Can someone throw some pointers how to resolve the above issue.
Thanks in advance.Hi
can you recreate the same issue
are you saying that
1. create a limit po for 100 USD and replicated to ECC AS 100 USD total value.
2 . now update the PO in SRM 150 USD and it was not replicated to ECC ?
or
1. limit sc
2. Limit PO
3. update not reached ECC.
Note 1284361 - Limits not transferred to backend purchase order
Symptom
Extended classic scenario.
You have ordered a purchase order with more than one hierarchy item containing a limit.The purchase order is created or updated in the backend system without errors but the limits are missing in the backend purchase order. -
Impact of the Transport Layer changes in the package
Dear Experts,
We are in the process of the Upgrade. As a part of the upgrade from 3.1to BI7. We have two Dev systems one is with the 3.1 - BWD and the other one is with the BI7- CBD now. We have transported all the objects with the Package : ZBWD (Where the transport Layer of this Package ZBWD).
And we have introduced the new Integration system(CBQ) in the landscape now and we have changed the Package ZBWD properties(We have changed the Transport Layer of this Package from ZBWD to ZCBD).
Can anyone please tell me the consequencies of this change in the package. We are planning to move this changed package, once the upgrade is finished.
Can any one tell me the consequencies of this change and also if we dont transport this package change in the other systems, then what wil be the consequences.?
Thanks
Raman
Edited by: Raman R on Aug 12, 2008 5:42 PMHi,
We have the package exists in the production which is with the earlier Transport layer called ZBWD.
As we have the new development system now, we need to change the Transport layer in that same package: to ZCBD.
Can anyone tell me will there be any impact of this change on the objects in the further landscapes? and also please explain me what are all the steps which needs to be carriedout if the transport layer got changed in the package?
Thanks
Raman..... -
Transaction changes from 4.7 to ECC 6.0
Hello,
we are planning a release change from 4.7 to ECC 6.0.
We need to know which transaction will be replaced or changed.
We need to know this for planning test etc.
Gruß
ToniHi Antonio,
Please refer this wiiki link for
Transactions Changed in ECC 6.0 - ERP Upgrade - SCN Wiki
Regards,
R.Brahmankar -
Which package colorizes the output of dmesg
I have colored output of dmesg on my desktop just by typing "dmesg" but it is not colored on my laptop. Which package is doing that?
Check the output of 'type dmesg' and 'type -p dmesg' on the computer that has colored output.
man dmesg wrote: -L, --color[=when]
Colorize important messages (enabled by default). The optional argument when can be auto, never
or always. If the when argument is omitted, it defaults to auto.
dmesg is provided by util-linux package. Are both using the same version?
Edit: Tooo laaate,
I think it's a recent change, as I haven't changed anything on my system an now just typing 'dmesg' gives me colored output.
util-linux 2.24.2-1 is just black'n'white.
Last edited by karol (2014-08-09 09:40:48) -
TCodes that have changed from 4.7 to ECC 6
Hi,
We are planning a upgrade from 4.7 to ECC6. Is there any readily available list of:
1) Transaction Codes that have undergone a change from 4.7 to ECC 6?
2) transactions that have become obsolete?
Regards
PeterThanks Gautham for the prompt response.
That means that I can only come to know of the changed TCodes after I upgrade and not before that? Or can I look at this table in any other company's ECC 6 system and get the data?
Will company specific cutomisation have any bearing on the changes done by SAP to the std TCodes?
Also does this table give the complete list of changed TCodes? Also is there any table, FM etc which also gives what has been changed in these TCodes?
Peter -
How to create a package in ECC 6.0.
Hi,
Can you tell me how to create a package in ECC 6.0 system?
Thanks in advance,
Regards,
Arnab.Hi,
Thank you for your replies.
Can you tell me the difference and uses of the two types of package I can create from SE21.
i.e. : Package and package interface. any sap link would also be helpful. I need to know where i can use what and what would be helpful for my case.
Regards,
Arnab. -
Hello,
I want to create a webpage for my local scout association, and I would like to use dreamweaver to do it.
It's not something I will get paid for.
But I can not figure out which package I need to buy.
Because it is only me who will be using it, and therefore I thought it should be a personal license.
But I am also a student at university college of northern, therefore I thought it should be a Student license.
but maybe I'm wrong and it should be a license for a small business?
Can anybody please explains to me which package I need to buy?
In advance thank you for your time :-)
//Larsif you can qualify as a student, getting a student license is less expensive (but more of a hassle to obtain because of documentation needed).
otherwise, you would get a personal/individual license. -
[SOLVED] pacman: which package should I install for a given file?
Hi there!
I'm still trying to learn arch's essentials. A question coming up frequently is:
Say I know I need file /usr/bin/zipinfo. How do I find out which package it's delivered in? The only thing remotely similar in the wiki is
pacman -Qo /path/to/a/file
but this only works for already installed packages. So what next?
Best wishes,
Rufus
P.S.: google told me the package is called unzip so that's not the problem. Still, there has to be some way to get this information from the command line.
Last edited by RufusD (2010-04-24 15:30:31)brilliant, thanks! I could have figured it's not a standard pacman function (since the situation is similar with debian's apt-get).
Maybe this is worth a mention on pacman's wiki page. This is the first time arch's fabulous wiki let me down
Last edited by RufusD (2010-04-24 15:32:35) -
When I Copy & Paste, what results in the Paste is NOT what I copied. With enough shaking, eventually a box appears saying "Undo Change attributes", which fixes it. HOW do I turn off "Change attributes" in iOS 5.1?
Did you ever figure out which output worked the best? I have the same original footage; trying to determine the best output settings to make a dvd for tv.
thanks! -
How to create Gantt Chart by Java? which package n class include it?
may i know how to craete Gantt Chart or any other chart using Java programming?? which package n class enable me to do so..?? i try 2 find on API but fail lo
thankshttp://www.egantt.com/
-
why do i keep losing my keyboard, I've changed batteries which are now 100%?
Hello:
Try a couple of things:
1. Reset PRAM.
2. Make the device a favorite.
Barry -
Trying to change reset my Apple ID as I can't remember it, however it is sending an email which says invalid link or a list with the option to change password which can't be clicked on? Can anybody please help? Going around in circles! Grrrrrrrrrrr
Is this your machine or the company's? Machines that came with Snow Leopard or earlier installed come with system and software install disks that can be used to reisntall the iApps that came with the machine orignally.
If this is your machine and it came with Snow Leopard or earlier installed the disk will look slimialr to one of these:
If it is the company's machine see if they have the disks.
Do a custom install and then use Software Update to update iPhoto to the highest version that is available. -
Is there a way do find out to which package a file belongs?
If pacman tries to install a package it is normally aware of files beeing already installed and puts out an error message. Is it possible to encounter to which package a file belongs, t.m. which package did install it?
pacman -Qo <file>
For example,
$ pacman -Qo /usr/bin/python
/usr/bin/python2.5 is owned by python 2.5.1-5
It's all in the manpage for pacman.
Maybe you are looking for
-
My iPhone 3GS has worked like a charm. I stupidly agreed to do the software update today, and now both of my computers ignore it. Both computers are Mac. Both are updated. This is extremely frustrating, since I need my phone today for work purposes,
-
New M5000 server - Can't get bge0 to work in the OS
Just recently powered up a new M5000 server. Went through the setup process of setting the networking details of the management card - which I believe also works through ethernet0 (LAN#0). That is working just fine and is what I have used to access t
-
Changing language on new Mac Mini
Hi all, I have another thread in the "mini" forum but this may actually belong here: I just ordered a new Mac Mini. Since I'm buying from the German Apple store, the Mini will come with the operating system in German. Naturally, it will also come wit
-
Problem about using GOS to store business document!
Hi Everyone, I am using Generic Object services toolbar to archive document. When I attach thru Create Attachment button and display by clicking on the attachments list, it is showing Creator name and the real name of document .But If I attach
-
How to define f4 help for parameters in selection screen.
Hi Folks, I have declared parametrs of type RLGRAP-FILENAME and i want to select the path for the application server file by pressing f4 during run time , not like typing the path in the field input. Pls help me how to do that. Thanks in advance. Re