FM2-A75MA-P33 + A10-5800K

Anyone experienced this combination to be stable?

The psu doesn't only look crappy but it is technically. None the less try the suggested: Quote from: flobelix on 14-June-13, 03:54:37
Clear cmos (>>Clear CMOS Guide<<) and try both sticks indivdually. If no help try a better psu as your one is quite crappy. Also try a different SATA cable for the HDD.

Similar Messages

  • [SOLVED] FM2-A75MA-E35 A10-5800K no Max Turbo

    Hello, I have a MSI FM2-A75MA-E35 motherboard with the 1.41 Beta Bios & AMD A10-5800K with DDR3 1600Mhz & Windows 8 Pro. I did the factory reset by hitting F6 to go back to stock bios, now when I put Intel XMP enable on then save the setting. when I boot into Windows 8 Pro the A10-5800K show the processor 3.80ghz as Max Speed which is normal, when I encode a video it run at 3.95ghz but not at 4.2ghz. all I did in the setting is enable Intel XMP & that it. I have not touch anything else, Max Turbo is in auto. 

      Thanks for reporting back!

  • FM2-A75MA-P33 sleep issue

    Just built up a new system running the FM2-A75MA-P33 and the AMD A8-6600K processor.  The computer will sleep just fine when the "Resume by PCI or PCI-E Device" box is unchecked.  The problem is that I want this box checked so I can utilize WOL.  As soon as I check the box and attempt to sleep the computer, it wakes right back up.  I have confirmed that the only devices that are armed for wakeup are the HID Mouse, HID Keyboard, and NIC.  Running Windows 8.1 x64 RTM.  Running 11.3 BIOS version.  Running 13.10 Beta version of AMD APU drivers.
    Thanks,
    Brian

    Yep, already saw all of that, but thanks for the info.  My settings are set correctly.  I even have it setup to "only allow a magic packet to wake up the computer" and it still won't stay asleep.
    Thanks,
    Brian

  • Modify vcore cpu in FM2-A75MA-P33

    hello , (sorry for my english language, i'm french)
    I have a FM2-A75MA-P33 with a x4 750k , and i would like to increase vcore cpu, but there isn't this option in bios...?? 
    Before i buy this motherboard, i have read the manuel in msi website and i have seen the option, but now i have it, no option in bios...
    Is there a thing to do to activate it in bios ??
    thanks for your answer

    Same problem here...
    The manual shows that the vcore can be modifiable but any bios from A1 to B3 has this option.
    MSI fix this!!
    Moreover on latest B3 bios there is options on bios that are textbox instead selectbox  or empty!!!

  • FM2-A75MA-P33 BIOS Update

    Hi, i just bought the FM2-A75MA-P33 and a new richland cpu A4 4000. The stock bios doesn't support Richland CPU's and the latest bios on MSI's web is a exe file. According to MSI you need a Trinity cpu to update the bios to support richland CPU's. Is there any way around it? Of course i don't have any Trinity cpu's at home (who has a cpu stock anyway?). Or should i just return it and get a gigabyte or asus mobo where u can update the bios without any problems?
    Thanks.

    Once again: it needs to be flashed the .exe way! If you are afraid to do it let it be done.
    Quote from: flobelix on 26-June-13, 02:56:10
    Either you flash it with the .exe method yourself or you let it be flashed at your expense by MSI or any pc-shop. It's your choice. Otherwise switch to a Trinity cpu. A Richland cpu requires a bios that supports it.

  • FM2-A75MA-P33 - no video/post/bios/beeps.

    Hi everyone,
    I built a PC with these parts:
    APU: AMD A-Series A6-6400K X2 SFM2
    Motherboard: FM2-A75MA-P33
    RAM: Crucial Ballistix 4GB DDR3 PC3-14900 CL10 BLS4G3D18ADS3CEU
    HDD: Seagate BARRACUDA 500GB 7200RPM 16MB ST500DM005
    PSU: Corsair VS350 ATX2.31 350W CP-9020052-EU
    When I first turned it on, it got no video, so I assumed it was that the BIOS is too old. I borrowed an external GPU, attached it and was able to get to BIOS. The BIOS version was V11.1, so the APU should work (according to the MSI website). In any case, I flashed it to V11.2 and still no changes. No video/post/bios/beeps when using the onboard graphics.
    The BIOS displays the CPU name properly, even with the Radeon xxxxHD in the name, but when I go to the Integrated Graphics Devices Configuration in the BIOS, the only option there is Initiate Graphic Adapter set to PEG and it's grayed out, can't change it.
    Not sure if it is relevant, but when removing the RAM it does not beep, neither with or without the external GPU.
    Also I have noticed, that without RAM, when the fans speed up and then slow down, the power button has to be long pressed to turn off the PC. But when having the RAM and GPU, when it goes through the boots and sees that there is no OS, it displays a message and can be turned off by a short press on the power button. Same thing happens without the external GPU, but there is no video output, so I assume it does go through the boot process.
    I've tried both the VGA and the DVI port, with cables and a monitor that works on another PC, I've also tried to clear the CMOS and flashed bios back to V11.1 (the one the motherboard came with).
    I saw somewhere mentioned that the Initiate Graphic Adapter option can get disabled do to overclocking or some other BIOS settings (I have the default settings though). Is there anything I can try changing to enable it?
    I am also thinking of installing on OS with the external GPU in it, and then maybe the video will output after it successfully boots.
    I guess I could also try reseating the APU, but not sure if that would help.
    Thank you in advance!

    Quote from: Svet on 16-August-13, 15:47:18
    what external VGA you use?
    can you boot when using onboard one ?
    do you see anything on the screen?
    is there any beeps?
    The external GPU I use is Asus GT 620.
    I am not sure if I can boot with the onboard one, as nothing is displayed on the screen when using the onboard one. It might go through the boot process and stop when detecting that there is no OS installed yet. I'll try to see if it boots to LiveCD when I get home or install an OS using the external GPU.
    When using the onboard GPU, I do not see anything on the screen.
    There are no beeps.

  • MSI FM2-A75MA-P33 Memory Support

    Hello, i have a question. Will the Patriot psd34g133381 ram memory work with the MSI FM2-A75MA-P33 motherboard? The Patriot psd34g133381 is not listed as a supported ram memory for the MSI FM2-A75MA-P33 mobo on the official site, but is there any chance that it will still work without any issues with that mobo? Thanks in advance.

     It should be OK. Just because it was not tested doesn't mean it won't work. It's impossible to test all of the RAM available on all of their MBs.

  • Fm2-a85xma-e35 A10 5800k poor graphics performance

    Hi guys,
    Made a new build with fm2-a85xma-e35 and A10 5800k and getting very poor graphics. Windows
    WEI aero score of 4.8, wow running at ~25 fps on low, poor Photoshop open gl performance, and choppy Windows performance when dragging  Windows around. Feels like no graphics driver is installed. Been tinkering for a week and even rma'ed a new apu and still the same. I know people say get an independent graphics card for good performance, but this is the issue of the apu not working properly on this board and not me trying to get gtx performance from an apu. Anyone have this combo can help? Thanks!
    Specs:
    A10 5800k
    CCC 13.12
    Fm2-a85xma-e35 bios v2.2
    Gskill ripjawsx 2x4g 2133 9-11-11-31 running properly in dual channel
    Antec neo eco 400c psu
    Win7 ultimate 64 bit sp1

    Quote from: badboy2k on 01-February-14, 14:22:03
    try dedicating some more Memory to it in BIOS! (it may be being choked there!)
    I dedicated memory to 1gig and still the same results. Stock was at 768mb. others are set at 512mb and still have proper test results. I don't think it's the vram, there's definitely something wrong.
    Only thing is I'm using ripjawsx 2133 ram, on MSI's site it states max supported is 1600 ram for ripjawsx. Ram runs fine but wondering if that can be causing a problem?
    I really don't want to RMA the board as it'll take 15 days to test and determine if it's faulty before sending me a new one IF it's determined to be faulty. Everything is working on the board except the poor graphics of the APU and the current buzzing sound with cool n quiet on.
    I also RMA'd the cpu already, but what are the chances of me getting 2 bad CPU's in a row?

  • FM2-A75MA-E35/A10-6800K/Radeon HD8670D - cant load graphics driver

    I'm building a new HTPC machine (specs below). OS installed fine. Boots with generic Microsoft drivers. Tried to install chipset drivers that came with mobo. The AMD catalyst control center tries to install the graphics driver (13.350.1005.0000 Beta). The screen flickers off once, then back on, then off again never to return. I'm seeing talk about flashing the BIOS with a cheap trinity core then flashing with my Richland core.  I need expert advice on how to fix this.  Thank You
    FM2-A75MA-E35 motherboard (MS-7721 Ver:1.3)
    A10-6800K/Radeon HD8670D
    2x2GB G.SKILL 1600
    Windows 8.1 64 bit
    BIOS Ver 1.5
    480W power supply
    Samsung monitor on VGA

    i had the same problem in last week, but i didnt buy a new processor, my bios just dont let me do anything so, i put a booteable usb of windows 7 and i booting the usb from bios and ignore the message to actualize to richland. Then i could install windows 7 ultimate 64bits and download the new BIOS driver. And that as you make so easy you just need to copy the ".exe" driver bios and put in a usb free. Start program, upgrade bios, reboot, and finish! you have richland v2.2 or something and you can run APU A10 6800k with no problems =)

  • FM2-A75MA-P33 & Win7 64Bit Storage Drivers

    Looking for the 64Bit AHCI Sata drivers to install Win7 using this Mobo.  I was able to install the 32Bit drivers that came on the CD with no problems, but none of the 64Bit drivers work (CD or on the MSI website).  Has anyone had any luck loading the 64Bit drivers using this Mobo and getting windows to detect the controller on install?
    Thanks

    Right after I click to install Windows 7 (when booting off the install DVD), it starts scanning for Controllers/disks to partition/install onto.  The screen then states that it could not find any controllers/disk and prompts to load a driver.  I had no problem loading the 32Bit drivers for AHCI from a fresh install when I only had 4GB RAM in the system, but now I've installed 8GB of RAM and thus re-installing Win7 for 64Bit support.
    It's running a  AMD A10-5800K Trinity 3.8GHz CPU running the latest BIOS
    Thanks!

  • FM2-A75ma-p33 does not detect HDD's

    The board will not detect the HDD's. There are two of them. They are connected SATA. They are detected by my other PC. I have switched out the power supply unit already. The BIOS will not detect them. I have tried using IDE mode (which wasn't really needed since I am going to be installed Windows 7, but I figured it couldn't hurt). Still did not work.
    I cannot update the BIOS through the ZIP or EXE as there isn't an OS on that computer yet. I need the BIOS file in order to do it. How do I get the BIOS file so I can update the BIOS from the utilities in the BIOS?
     Any suggestions?

    Quote
    I cannot update the BIOS through the ZIP or EXE as there isn't an OS on that computer yet.
    You don't need an OS. The .exe can be flashed in dos too. Create a boot stick (https://forum-en.msi.com/index.php?topic=165175.msg1209899#msg1209899) and start the .exe from there.

  • FM2-A75MA-P33 Memory Issue

    Hello,
    i got 2 Memory Sticks, each 2Gb. When both of them are plugged in, i can not even Boot an Installtion Media; the System crashes at once. ( I can see the Bios, 4Gb are recognised)
    When only one Module is on the Board i can boot and install Windows or Linux. It does not matter which Module or which slot is used, both are working, but not together.
    I have updated to latest Bios Version 11.3, now I can ran a Boot Media, but the System crashes and reboots when the Start Logo comes up.
    Using the Board above; Cpu A4-5300 ; and a Pair of HammerRam 1333.
    Are there any there anySettings I can choose in the Bios?
    Regards

    Hello,
    still no luck changing the DRAM Voltage. I think it is locked in the Bios.
    The only Entry for Dram Voltage is to find in the "Overclocking Settings". All Entrys i can change are written in Brackets []. Dram Voltage is not.
    Btw: Dram Voltage is jumping between 1.464>1.472 both Values are too low..
    Regards

  • A75ma-e35 A10-5800K and Samsung Miracle ram

    I just installed a closed system liquid cooler in my microtower where a bigger cooler wouldn't normally fit.  I only had a 74mm of room.  Its works really well but my goal was to overclock the memory.  I've tightened the timing from 11 11 11 28 to 7 7 7 24 with marked improvement in memory benchmarks.  I can't seem to run the Samsung MV-3V4G3/US two 4GB 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) higher than 1600 though I've heard of people doing so.  They are famous for being clocked higher than their intended specs.  It refers back to DRAM Frequency of 800mhz on CUPID every time I attempt to do so so I know I am missing something.  It has gone up to 838mhz when running OC Genie but I was hoping for 933 or 1066.  I've read many articles but nothing intended for this particular motherboard.

    I can adjust the following:  CPU Voltage, CPU Northbridge, Southbridge, DRAM, Northbridge.
    I might try some trial and error but I'll be going through this APU territory gingerly.

  • FM2-A75MA-E35 with A10-5700, CPU temperature at 85c!!! Is this normal?

    I just put together the system, see below (no overclocking), and using AMD Overdrive for stability test with CPUID software to monitor temperature:
    FM2-A75MA-E35
    A10-5700 Boxed using stock fan
    Patriot signature DDR3 8G 1333mhz 
    1T WD Greennnn..........
    At room temperature about 25c
    1. In BIOS, temperature after boot up jumps quickly from 25c to idle at 58c and the fan spinning at about 3200 RPM. It sounds like a small refrigerator.
    2. Idle in Windows 7, CPUID displays CPU temp at 42c.
    3. Stability test using AMD Overdrive with all components selected, CPU temp shoots up to MAX at 85c!!!!! average about 75c!
    I found out that A10-5700 maximum temperature is 71c.  I double check everything (connections and fan) and update the BIOS then run it again, the same results show up. 
    Is there anything wrong?
    Darth

    Quote from: darth_juon on 13-February-13, 02:03:41
    Thanks Joe and wlahdone,
    I am currently waiting for the new A10-5700 CPU. 
    Have you try the last BIOS version 1.7 (1/29/2013) with Update CPU AGESA code?
    I also had BIOS problem. 
    BIOS version that come with the board, It hung when I try to save changes and exit. This issue has been reported by another user.
    BIOS version 1.5, Solved the save changes problem.
    *Both versions have the same funny temperature reading.
    I don't want to spend much time with this, I only need a simple PC or two, just driving to the PC store gas cost a lot of money these days.
    I had the same issues when i ve bought it - the freezing at save.
    It seems the board comes with BIOS 1.2 which is bugged ,it simply takes the OC settings at the first boot and overclocks the FSB ,this giving the freezing most probable.
    Clearing CMOS or pressing F6 and then F10 in BIOS solves the problem.
    I am on BIOS 1.5 and it s ok.
    The HW Monitor reports the 0 Celsius for the onboard video ,but i really don t care.
    I ve thrown at it Windows XP ,Windows 7 ,Open SUSE 12 ,Linux Mint and Simply Mepis.
    They all worked fine in spite of the little 5300 APU that i use for this HTPC , it runs everything
    I ve made myself a toy that plays 1080p and routes in same time ,a pleasure to see it in action
    After AMD releases the new APU-s ill switch from a AM3+ rig to one of these.
    The board BIOS reports nice temps if you use a proper cooler.

  • FM2-A75MA-E35 with A10-5800K will not POST

    This is my first post, but not my first build. When I power on the processor, the CPU fan and the case fan start, but I have no signal or power at any of the rear panel connections. As a result, I have no keyboard, mouse, or monitor. Is it likely that I have a bad motherboard?
    Here are the specs:
    AMD A10-5800K APU (new):      s/n 9L33252B30018
    MSi FM2-A75M-E35 Motherboard (new):   s/n 601-7721-010B1307193315
    The board is MS-7721 version 1.3
    Any suggestions would be appreciated. Thanks.
    Bob

    I removed motherboard and CPU, examined the CPU installation prior to removal from its socket. All looked OK while in the socket - no misalignment and no bent or exposed pins. I then removed the CPU from the socket and examined again. It is in perfect physical condition.
    Next I cleaned the old thermal paste from both the heat sink and the CPU, reapplied clean paste, and then re-installed  the CPU. The CPU dropped into the socket with zero insertion force. I re-installed the heat sink and fan, installed the memory, then connected the power cables and fan switches.
    When powered up and run for 3-4 minutes, the processor heat sink is warm, so I think the CPU may be working, or at least it has power. There were no beeps on start up. I again tried to connect mouse and keyboard, and tested the USB ports for a signal. No change from the condition of yesterday - still no light on the optical mouse or keyboard, and no connection to the USB ports on the back I/O panel.
    I can purchase another power supply locally if that seems to be the trouble, but the motherboard and CPU apparently have power. What else can I try?

Maybe you are looking for