FM2-A75ma-p33 does not detect HDD's

The board will not detect the HDD's. There are two of them. They are connected SATA. They are detected by my other PC. I have switched out the power supply unit already. The BIOS will not detect them. I have tried using IDE mode (which wasn't really needed since I am going to be installed Windows 7, but I figured it couldn't hurt). Still did not work.
I cannot update the BIOS through the ZIP or EXE as there isn't an OS on that computer yet. I need the BIOS file in order to do it. How do I get the BIOS file so I can update the BIOS from the utilities in the BIOS?
 Any suggestions?

Quote
I cannot update the BIOS through the ZIP or EXE as there isn't an OS on that computer yet.
You don't need an OS. The .exe can be flashed in dos too. Create a boot stick (https://forum-en.msi.com/index.php?topic=165175.msg1209899#msg1209899) and start the .exe from there.

Similar Messages

  • Can't install Win 8 - Satellite Pro C660 does not detect HDD

    Hello,
    My HDD has died, so i decided to upgrade my Satellite Pro C660-1D9 to an SSD.
    I made a bootable USB with Win8, and booted just fine.
    The problem is that it does not detect my SSD so i can proceed with the install.
    SSD shows up in BIOS, but not in Windows install.
    It says there's a driver missing.
    I downloaded AHCI drivers (XP, only ones available) and even then, after selecting the only driver that appears, it says no new devices found.
    I tried changing SATA mode from AHCI to Compatibility mode and it's the same..
    What can i do?
    Thanks for the help.
    Best regards,
    Bruno Moreira

    Older Windows XP required an AHCI driver from Intel but I think this isnt a missing SATA driver issue because as far as I know Windows 8 as well as Win 8.1 already contains the drivers in order to recognize the HDD or SSD drive.
    Furthermore the OS installation should be possible even if the driver would not be added... for this procedure you have to use the "compatibility mode".
    As you said, the compatibility mode did not work too, so I think there is another problem.
    However, Toshiba driver page provides also an Intel RST (Intel Rapid Storage Technology) driver (Windows 8 - Upgrade) which you could try to add while OS installation.
    But Im wondering if you would be able to install this Win 8 on common SATA HDD.
    Did you try to format the SSD drive using another computer and then to install Win 8?
    Try it out.

  • Does not detect HDD & CD-ROM!! heeeelp

    Hello!!
    I recently conected a new motherboard to a friend's computer (MSI 6368).  I connected everything, but when I boot, the BIOS does not detect the HDD and the CD-ROM. I think that is something to do with the BIOS configuration, but I dont know much about it and cant figure put what went wrong with it.  I tested another HDD to see if the current is damaged, but didn't detect the other also.
    I tought that maybe a BIOS update can do something, but I cant update the BIOS from a floppy.
    Please can someone help me out with this??? ;(
    thanx!!!

    has he set the jumpers on the drives right
    master /slave or none for a wd drive if on an ide on its own
    more detail would help
    is the detection on the ide set to auto in the first bios section

  • FM2-A75MA-P33 - no video/post/bios/beeps.

    Hi everyone,
    I built a PC with these parts:
    APU: AMD A-Series A6-6400K X2 SFM2
    Motherboard: FM2-A75MA-P33
    RAM: Crucial Ballistix 4GB DDR3 PC3-14900 CL10 BLS4G3D18ADS3CEU
    HDD: Seagate BARRACUDA 500GB 7200RPM 16MB ST500DM005
    PSU: Corsair VS350 ATX2.31 350W CP-9020052-EU
    When I first turned it on, it got no video, so I assumed it was that the BIOS is too old. I borrowed an external GPU, attached it and was able to get to BIOS. The BIOS version was V11.1, so the APU should work (according to the MSI website). In any case, I flashed it to V11.2 and still no changes. No video/post/bios/beeps when using the onboard graphics.
    The BIOS displays the CPU name properly, even with the Radeon xxxxHD in the name, but when I go to the Integrated Graphics Devices Configuration in the BIOS, the only option there is Initiate Graphic Adapter set to PEG and it's grayed out, can't change it.
    Not sure if it is relevant, but when removing the RAM it does not beep, neither with or without the external GPU.
    Also I have noticed, that without RAM, when the fans speed up and then slow down, the power button has to be long pressed to turn off the PC. But when having the RAM and GPU, when it goes through the boots and sees that there is no OS, it displays a message and can be turned off by a short press on the power button. Same thing happens without the external GPU, but there is no video output, so I assume it does go through the boot process.
    I've tried both the VGA and the DVI port, with cables and a monitor that works on another PC, I've also tried to clear the CMOS and flashed bios back to V11.1 (the one the motherboard came with).
    I saw somewhere mentioned that the Initiate Graphic Adapter option can get disabled do to overclocking or some other BIOS settings (I have the default settings though). Is there anything I can try changing to enable it?
    I am also thinking of installing on OS with the external GPU in it, and then maybe the video will output after it successfully boots.
    I guess I could also try reseating the APU, but not sure if that would help.
    Thank you in advance!

    Quote from: Svet on 16-August-13, 15:47:18
    what external VGA you use?
    can you boot when using onboard one ?
    do you see anything on the screen?
    is there any beeps?
    The external GPU I use is Asus GT 620.
    I am not sure if I can boot with the onboard one, as nothing is displayed on the screen when using the onboard one. It might go through the boot process and stop when detecting that there is no OS installed yet. I'll try to see if it boots to LiveCD when I get home or install an OS using the external GPU.
    When using the onboard GPU, I do not see anything on the screen.
    There are no beeps.

  • Tecra Z50-A-11V: New SSD but Win 8.1 does not detect it

    We bought a Crucial M550 256GB disk and want to replace in a Toshiba Tecra Z50-Av1
    We do not want to make any transfer of data or cloned.
    We want to do a clean install with Windows 8.1
    The BIOS recognizes the SSD
    But when you install Windows 8.1 does not detect any disk connected to the unit and requested additional drivers. Windows not detect drive
    https://www.dropbox.com/s/mlvk6v3lxzi1rrh/2014-05-04%2009.47.18.jpg
    https://www.dropbox.com/s/fr2eo5l9xonaoln/2014-05-04%2009.48.59.jpg
    https://www.dropbox.com/s/8usxog8wm06funr/2014-05-04%2010.06.09.jpg
    i too test with lasted version of this driver (old F6 in boot to locate hdd driver)
    https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23496&lang=eng&wapk w=f6flpy-x64.zip
    and with toshiba package
    http://support.toshiba.com/support/viewContentDetail?contentId=4004211
    you can see than i have 3.20 version of BIOS. interestingly I see that the last one is the Toshiba has released version 3.1
    But always the drive CRUCIAL is not reconized by the boot instalation of windows
    The problem is similar with ubunto, kubuntu, .... the drive is detected with the BIOS but not for the OS.
    any help?
    Thanks

    Hi
    Did you solve this issue?
    Could you install the Windows 8.1 system on this SSD drive?
    I think the additional driver installation while setup procedure isnt necessary since Win 8.1 should already contain the essential drivers.
    From my point of few there could be an compatibility issue (maybe SSD firmware update would solve this).
    How about the usage of other SSD drives? Do you have the same problem using other SSD drives from other manufactures?
    Feedback would be appreciated.

  • MSI FM2-A75MA-P33 Memory Support

    Hello, i have a question. Will the Patriot psd34g133381 ram memory work with the MSI FM2-A75MA-P33 motherboard? The Patriot psd34g133381 is not listed as a supported ram memory for the MSI FM2-A75MA-P33 mobo on the official site, but is there any chance that it will still work without any issues with that mobo? Thanks in advance.

     It should be OK. Just because it was not tested doesn't mean it won't work. It's impossible to test all of the RAM available on all of their MBs.

  • Macbook pro does not detect TV

    Hi,
    I have macbook pro Mid 2010. It used to work fine with Sony Bravia TV but today when I tried it was not detecting my TV.
    I do not see any "Arrangements" tab under System Preferences -> Displays. Here are my macbook pro details:
    Processor  2.53 GHz Intel Core i5
    Memory  4 GB 1067 MHz DDR3
    Graphics  Intel HD Graphics 288 MB
    Software  OS X 10.9.5 (13F34)
    I tried to reset PRAM but no help. Any suggestions on what may be happening?
    Thanks,
    Gaurav

    skn2011 wrote:
    My Macbook Pro notbook 13.3" does not detect external display throught it's mini display port to HDMI connector when connected to Sony Bravia 32" LCD TV.Can anyone help me get the answer as i tried reading everywhere on internet and none does not seems to work.Please help me out guys.
    Are you using the Apple adaptor or a 3rd party

  • When i connect my philips 170c monitor to my macbook pro 13" early 2011, it does not detect the second monitor?

    help! i've googled around, but none seems to solve my problem
    my macbook pro is early 2011, 13", running lion.
    the philips monitor is vga only, so i have a mini display port to vga adaptor and connecting it to the vga.
    the screen on my mbp does turn blue, but no input is detected on the external monitor.
    any advice?

    If it does not detect the display automatically, try going to system preferences>displays, click detect displays.

  • Smartband and Lifelog does not detect jogging

    Hello,
    Smartband and Lifelog does not detect jogging (does not distinguish walking and jogging/running).
    For example - walking with speed 5.7Km/h and treadmill running with speed 9-10 km/h.
    Smartband worn on left hand.

    Hi, 
    As I understand, lifelog log your exercise as running if the pace is 2.5 steps/ second or above. 
    What are your thoughts about this forum? Let us know by doing this short survey.

  • How can I use Bluetooth it does not detect others iPhone

    How can I use Bluetooth it does not detect others iPhone

    The bluetooth functionality on the iPhone is limited. It's basically limited to audio devices (headsets, for instance), although certain apps allow greater functionality. Search the app store for "bluetooth share"

  • HT4437 hi even when i connect my macbook and apple tv to the same wifi network i cant put on the air play mirroring option.my airplay mirroring option does not detect any device.what can i do for this?

    hi even when i connect my macbook and apple tv to the same wifi network i cant put on the air play mirroring option.my airplay mirroring option does not detect any device.what can i do for this?

    See
    http://support.apple.com/kb/TS4215

  • Itunes 11.1.4.62 does not detect existing iphone or ipad

    Just downloaded the above, and now on plugging in either my existing iphone or my Ipad via wired USB connection, itunes does not detect the device.  Running windows 8.1, Tried updated iphone software to match as well, still no detection.  Am I missing something on the new version in set up or something, or is it an uninstall and reload?
    Thanks

    Have tried different cables as well

  • Hi; I updated my iTunes to the latest version (11.1.4.62), but it does not detect my iPhone 4s any more.

    Hi,
    I updated my iTunes to version 11.1.4.62, but it does not detect my iPhone 4s any more. I have tried the following ways but still did not work:
    Rebooted the computer
    Rebooted the iPhone
    plugged and unplugged the USB cable multiple times and to various USB ports
    Uninstalled and installed the i-Tunes
    Signed out the iTunes and signed in again
    my USB cable and ports are all ok
    my ios version on iPhone is : 7.4.4
    my laptop os is windows 8.1 and my processor is: Intel Core i7-3610QM @ 2.30 GHz
    I appreciate your help.

    I find this on another post and tried it.  It WORKED.  I had to modify to fit my situation but give it a try.  Good luck.
    Go to Windows 8.1 Control Panel.
    Go to Hardware and Sound; Devices and Printers; Device Manager; Portable Devices (look for Apple IPad)
    Right-click, then select properties on the menu list.
    Under the "Driver" tab menu, confirm the update driver button is not greyed out.  If the update driver button is grey and unselectable, you need to select and click "Change Settings" button located near the lower left corner.
    Now you can click the "Driver" tab menu near the top, so you can see the "Update Driver" button.
    Select "Update Driver".
    Select and click "Browse my computer for driver software".
    For Windows 8.1 64 bit, it should be located in the folder: C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers. 
    Click Next, and let the driver re-install.
    iTunes  11.1.4.62 should open automatically if your iphone is connected already.

  • HT1296 i just downloaded the latest version of itunes but now i cant zync my ipod. i tunes does not detect my ipod. ut just to work perfectly with the older version of itunes but not now. what is something i can do?

    i just downloaded the latest version of itunes but i cant zync my iphone nor my ipod. it just to work perfectly with the older version of itunes  but now itunes does not detect my ipod nor iphone. i have a windows pd and iwindows detects the iphone and ipod. what is something i can do to fix the problem??

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests

  • When I plug my ipod into my computer, itunes does not detect it.?

    When i plug my ipod nano into my computer,itunes does not detect it ?? What i am supposed to do ??
    Thank you

    I think you have to remove ITunes and install the latest version's one; then it will work fine.
    Bye!

Maybe you are looking for

  • Using Windows 7 on Macbook Pro

    I have 2 Windows based prorams that are unavailable in mac editions. I am considering installing Windows 7 under Boot Camp. Would this cause any difficulties such as running slow, viruses and other problems that Windows has?

  • Free Transform Rotation Issue - Layer rotates/moves by itself after clicking on it?

    Hey all.  Since the last update, I have been experiencing this weird issue while using Free Transform.  Sometimes, after I invoke Free Transform and then click on the layer I am transforming, it seems to rotate by itself.  Usually clockwise.  It happ

  • BPM Scenario Development

    Hi I am using BPM for the first time and have tried to reach at a certain stage. The process is <b>FIRST STEP</b> Legacy File(MQ Series)-------> SAP XI(Validation) <------ Back to legacy if Error <b>SECOND STEP</b> SAP XI(Via Proxy)One record at a ti

  • Mac book audio problem

    hiho! i have a problem with a black macbook. i tried to install skype (wich works fine as long as i don't call!). everytime i try to call it crashes. but that's only a small problem. i tried to look at my audio preferences in the systempreferences bu

  • Export some xy graph values to spreadsheet

    Hello, I'm newish to labview and i'm trying to extract the values used to plot the XY Graph, but only for x=0,10...90,100 ... 360. instead of extracting 361 values i need only 37. I tried using another for statement but with no succes. Any help ? Sol