FMBB - trigger workflow for held document

Hi Experts,
In transaction, FMBB, when a document is held by pusing the Hold button, I would like to trigger a workflow and send a notification. I have checked the following..
There are no standard events shipped
No Change docs written
No Badis that are triggered
Any kind of pointers in this respect would be of great help!!
Thanks,
Suneetha
Moderator: I suggest to open this issue in Workflow forum

check configuration of workflows in IMG funds management.

Similar Messages

Payment release workflow for MIRO documents

Hi,
I have activated payment release function and successfully able to get workflow item for payment release for FI invoices posted through F-43 and FB60, but not on RE documents which are posted through MIRO,
Can some body provide inputs on how to trigger a payment release workflow for MIRO documents.
Thanks
Amanullah

Hi Amanullah, How are you?
Did you get an answer about this situation ? I am trying to do the same thing by FI or by MM and I'm worrying if we can to do by Standard SAP. In FI I'm trying to do via spro:
SAP Customizing Implementation Guide=>Financial Accounting=>Accounts Receivable and Accounts Payable=>Business Transactions=>Release for Payment
Did you remember how can you get the solution?
Thanks and regards,
Jeovana

How to trigger workflow for already created purchase order ?

HELLO EXPERTS
let me clear my scenario first . i have 1 purchase order whose workflow is not triggered . means it is showing me message no workflow that have already worked for this object.i have created 1 more purchase order taking reference of this purchase order means both are same same message for this po also. it was happening because event linkage for the business object bus2012 is not activated but now it is enabled and i have created third purchase order with reference to above po means this third po is also same as above 2 no change other than po number but for this workdflow is getting triggered . now i want to trigger workflow for orignal first po but for my first po it is showing me same message that no workflow that have already worked for this object. what i have to do to trigger workflow for this po. i have performed this steps in test system. i have workflow number

Hello !
      You can trigger the workflow from SWUE.Enter bus2012 and created for object type and event respectively.
      Click object key button where enter the purchase order number which have been already created.
      But, why do you want to trigger the workflow again for already created purchase order ?
Regards,
S.Suresh

Report for held documents

Dear Experties,
As we all know that we ''park, hold, save as complete and post'' the documents in SAP. Like T_code FBVO for list of parked documents, is there any t_code which can list or provide no. of documents held. In fact I want to know all the documents which are on hold through T_code FB50.
Fast reply will be appreciated.
Rgds,
BABA

Hi
In FB50 screen, from menu bar select EDIT select SELECT HELD DOCUMENTS. from the drop down list, you can select held document as per your need. Note that document number for held documents is always external.
hope this helps
pushkaraj

Function module to find list of workflows for a document

Hi
Is there any standard function module where I can get list of active workflows for a document ?
example : for business object FIPP I have a document number, fiscal yr and co code. I need to get like of workflow instances for it.
what we do in SWI6 or in display transaction - services for objects - workflow overview.
I need find function module as I need to call it in a user exit.
thanks
bhakti.

Hi,
Concatenate the fields in the following order:
1. SourceCompanyCode
2. DocumentNo
3. FiscalYear
Use
CATID = 'BO'
TYPEID = 'FIPP'
INSTID = Concatenated value
in SWW_WI2OBJ to find TOP_WI_ID. Use this TOP_WI_ID as an input Parameter TOP_WI_ID of table SWWWIHEAD.
This will give you all workitems for your Document.
Regards
Gautam
Edited by: gautam maini on Jul 7, 2011 2:23 PM

Triggering of Workflow for park documents based on Document type.

Hi,
I have activated workflow for park documents but it is triggering for all document types. Client dont want workflow for Customer park documents.
I assigned SA document only in "release approval path" but it is triggering for all document types.
Please help me.
Thanks.
Azeem

Hi Azeem,
We have the same requirement. Would you mind sharing how you were able to accomplish this?
Thank you,
Mark.

Create workflow for parking document

hiiii all
can any one tell me in detail, what is the function of creation of work flow for parking document? and how do i configure? and how do i assign with user? please help
menu path :- financial accounting global settings - document - document parking - create workflow for parking document
regards
rajesh
Moderator: Please, search before posting. These are standard WF functionalities of SAP. If you have particular question about WF, please ask it on a proper forum

Hi,
Are there any special settings for SUBWORKFLOWS
There is no Special Setting for Sub Workflow.
Only error which i get in my inbox is
Please repair the suspended workflow
1) Once you get the Error, open a new session goto T.code SU53 and see any authorization issue
If Yes, send the screen shot to Basis Team to get the authorization.
2) If Authorization is fine, Check the binding for that Workitem Regenerate and Test it . Also Check the Workflow log and see which step error is showing, then see the Step history comments. .
Regards,
Surjith

Workflow for parking documents

Hi all
Can any one explain me, wht is workflow and how to create?????
I need to creat workflow for parking documents??
It is urgent..
Thanks in advance

Silky,
Before putting up such a broad-bases query to this forum, try doing some homework. This (type of) query can't exactly be answered long distance!
Anyway, to get you started, I'd recommend SAP Help: http://help.sap.com/erp2005_ehp_01/helpdata/en/fd/517b42303e0e53e10000000a155106/frameset.htm
Second step - use Google!
Trust me, it works - always.
Best of Luck
Regards
Gulshan

Trigger workflow for MIRO invoice creation

Hello,
In standard functionning it is not possible to trigger the workflow for documents coming from MM.
When using transaction MIRO and selecting invoice creation the created document has following value :
BKPF-AWTYP = 'RMRP'. whereas creating it from FB60 results to BKPF-AWTYP = 'BKPF'.
The problem is standard code checks AWTYP is not equal to 'RMRP' before creating event to start the standard workflow for invoice validation.
Question : why sap doesn't allow workflow creation for invoices from MIRO?
Thanks for your answers.
Best regards,
Laurent.

Hi,
here they are...
WS20000397 MMIVBlockedP Treatment of inv. blkd for price, Log.IV
WS20001004 MMIVToRel Release the Completed Log. IV Document
WS00400026 MMIVquantity Treatment inv.blocked f.quantity reasons
WS20001003 MMIVToCompl Complete the Parked Log. IV Document
WS00400027 MMIVprice Treatment invoic.blocked f.price reasons
All of these workflows are a one-step / one-level of approval and needs some workflow configuration at least for the agent assignments. For a full-blown workflow you should take these workflows as an example, how you could work with it.
The last two workflows work with preliminary posting on the miro (transaction MIR7).
Best regards,
Florin

Workflow for approving documents: rejected document

Hi expert colleagues,
at my client we are implementing the workflow functionality for approving documents (EhP2). I managed quite easily to set-up the basic workflow as described in the documentation. I have one question though, the problem is the following:
Step 1: a correction document is entered by the corporate consolidation team person 1 and a workflow is triggered
Step 2: the document is rejected by the approval agent of the consolidation unit
Step 3: the rejected document becomes available for person 1 of the consolidation team, but the person is not present that day. Another person of the consolidation team wants to pick-up the rejected document, adjust it and start the workflow again. This seems to be impossible, the rejected document can only be modified (or discarded) by person 1. Even if person 1 identifies a substitute, the substitute cannot change the rejected document.
Question: is there a way to let another person pick up a rejected document?
Thx, ewald

Hi,
you can probably assign multiple approval agents to one consolidation unit. But in the case there is a rejection by one of the agents the document goes back to the initiator.
The document initiator can only discard or change the document via the consolidation monitor, task manual posting. And the initiator is the only one who seems to have the power to call up a rejected document (in that way it looks a bit as a user specific held document).
Any extra thoughts or should I look on the workflow forum?
Kr

Trigger workflow for all tcodes with set transaction GS01

Hi,
There are nearly 7 tcodes in FI maintained in the set tranasction using GS01 and we desire to trigger worklfow for all those tcodes, even if another one is added in future. What is the process to go about?
Regards

Hi,
Thanks for the concern.
The tcodes are SAP standard tcodes like fb50 and others for document park and post. Now the requirement is that, the set of tcodes maintained in set transaction GS01, say 7 SAP standard tcodes maintained, the workflow should trigger whenever someone parks or posts a document, which must be subsequently approved by a set of approvers and then the actual release and posting(or re-posting) takes place.
How can i achieve this using workflow, precisely to trigger worklfow for al those tcodes, now at a later date the tcodes can be either reduced or added to the set.
Best Regards
Partha Kar

Enabling workflow for parked documents in FICA

Please let me know if anyone used the standard workflow for approving parked documents before they can be posted. Please let me know the configuration and development steps needed to achieve this requirement as I could not find any kind of documentation around it.

Found the [documentation|http://help.sap.com/saphelp_47x200/helpdata/en/96/8b4e6943ce11d189ee0000e81ddfac/frameset.htm] in regular ERP documentation. I will follow the steps in this document and post a new question if I run into any issues. Closing this one.

WORKFLOW FOR PARKED DOCUMENT

Hello all,
I need to know the customising settings for workflow on parked document.how does the subworkflow attached to thw wf element(variant) get triggered in my main workflow for posting of parked document(i have modified teh std wf for parekd document i.e.ws0040004????I jst want to know ,how do i configure the subworkflow for release strategy(2 level release?).
Also how do i configure that the workflow shud be called at which point in my workflow?
Thanks,
Disha.

Hi
Workflow variants created for document parking control whether the document release is active ant the minimum amount.
No documents are released if any company code is not assigned a workflow variant.
Please check if w/f vairant is assigned to company code..
RGDs
KIM Khan.

Workflow for Parked Document (FV60)

Hi,
Can anyone tell me which workflow to be used for Parked Documents. The tcode is FV60. And I want to know what are all the settings have to be done in SPRO tcode. Can anyone provide me step by step procedure??
I think there are some 5 workflows : WS100000051,52,53,54,55.
I've to config for 6 Approvers. So which one can I use???

Hello Gurus,
Do anyone know what are all the settings have to be done in SPRO tcode. I've done some settings in which work item goes to the users which i've assigned at the same time. I need it to go one by one approved....
I want to know whether I should use only one approval path ?
In Assign Release Approval Procedure for Parking Document, do i need to give only one entry or 6 entries as i'm using 6 approvals. And the amount column in that is total amount or the amount for single release??
can anyone help me out in this ???

Error in Workflow for Parked Document (FV60)

Hi Workflow Experts,
I have a FI document parking Workflow scenario which is 3 level release that is if the amount is upto 10000 first person will release if it's more than that upto 20000 then second user has to release ,if more than that then third user will post.
For this i have activated the main workflow WS10000051 and for two level release i have activated the sub workflows WS10000052 for first level release and WS10000053 for secondlevel release and WS10000054 for thirdlevel release.
I have also done the Release strategy configuration in SPRO such as
in the following SPRO steps
1) Create Workflow Variant for Parking Document
2) Define Entry Screens for Parking Document
3) Assign Compaany Code to a Workflow variant for Parking Documents
4) Define Release Approval Groups for Parking Documents
5) Define Release Approval Path for Parking Doc
6) Assign Release Approval Path for Parking Documents
7) Assign Release Approval Procedure for Parking Doc
8) Define Users with Release Authorization for Parking Document. ( I have assigned the Position of CEO created in HR to this)
Now when the document is parked it throws the error
Error in workflow Customizing for document parking (tranasction OBWE) and it stops in the step Determining Sub Workflow.
Has anyone come across this issue.Please guide me in resolving in this issue, i am not able to identify whether this error is happening in workflow or due to some missed entries in SPRO settings of FI.
So please provide me how to do settings in SPRO For Parking, mainly in Tcode OBWE.
Regards,
Sagar

Hi,
Your question is exactly same as below.
[Re: Error in FI Document Parking Workflow;
Hope you 've gone thru this link already, if not, pl. go thru the above link. Also, give us more details on the error you see on the wflow log, like you are not getting any wflow template ID in the cont.element "&ACTIVITY_000043_TASK&", This should have either WS10000052, 53 or 54 depending on the Amt. level. See if you are getting any value here. If not, then there is somethign wrong in your OBWE settings.
Also, sometimes, even though this step of "Determe Subworkflow" step works fine, if there is no proper agent assignment, then also, it cannot create work item for next step of Sub wflow and hence will error out.
Pl .check the above. May be a detailed error message from wflow log would help us out in suggesting better.
Goodluck
venu

FMBB - trigger workflow for held document

Similar Messages

Maybe you are looking for