FME 3.0 Audio from Audio Conferencing Bridge issue

All Hi
I am having an issue pulling audio from an audio conferencing bridge and then streaming it out via Flash Media Encoder 2.5. When I take another source, such as music or pre recorded voice, it sounds fine, however as soon as I switch to the audio from the audio conferencing bridge, the resulting output via the website that I stream to sounds very poor. Not awful but not good. Obviously I understand that the audio isnt going to be as good as you would get from an MP3 or pre-recorded file but I dont think it should be this bad.
Could it be something to do with my encoding settings.
I am using Mp3, Mono, Sample Rate of 44100 ( which is high I know ) and a bit rate of 96kbps.
I dont believe its my audio hybrid ( Sonifex HY-03 ) or my converter box ( stereo phono to firewire converter ) as all other audio going into FME is fine, its just this darned audio conferencing feed.
Could my encoding settings be too high?
Thanks in advance.

To configure Osprey 440 you need to select exact Input in FMLE from this device.
Osprey 440 has 1 audio slot and 4 composite Video slot.
Starting from Audio cable, you have Video A, video B, video C and video D.
Similarly on Audio breakout cable, you have right and left channels for each of the 4 inputs starting from left 1 right 1, left 2 right 2 and so on.
In FMLE these device are listed as Osprey 440 Video device 1A, Osprey 440 Video device 1B and so on.
You need to select exactly that input in both audio and video drop down list whom you are giving input in the card.
Hope this helps.
Let me know if you still face the problem

Similar Messages

CS5.5--Issues with audio from imported avi's & issues exporting

To Start, my laptop:
CPU: Intel® Core ™ i7-2330QM CPU @ 2.00 GHz
CPU Clock Frequency: 2.00 GHz
System Memory: 8 GBytes
Cache Memory: 1 MBytes/6 Mbytes
Manufacturer: Sony Corporation
Model name: VPCF226FM
BIOS VERSION: R1190V#
OS Version: Microsoft Windows 7 Home Premium
ME Version: 7.0.10.1203
System Type: 64-bit Operating System
I downloaded the 30-day free trial of Premiere Pro CS5.5 with all updates. To play with the program, for my own personal amusement, I wanted to edit together pieces from a bunch of avi videos that I know to play properly outside the program, tested on more than one computer.
At first, importing the files seemed to be no problem, making subclips as I went along.
However, as I continued to import files, there began to be a sound issue--sometimes the sound not being present till I was 1/3 of the way through the clip, sometimes the sound seemingly playing catch up with audio that should be earlier in the video appearing later, sometimes the sound wouldn't come up at all, and still other times I'd be, for example, on video 5 when pieces of audio from video 2 would start playing over the current video.
I initially thought it may just be a memory issue, working with many large video files.
But later, when I went to edit the subclips I made, I found that many of them no longer had sound, even if they did when I initially subclipped them.
Weirdly, in the timeline, there is no consistency, as clips will appear in the video track but only some show audio tracks too. But those with audio tracks don't always play audio and those that show NO audio tracks at all actually do play audio sometimes. Also, those that show audio tracks and don't play them sometimes will show waveforms, sometimes don't. A clip with no waveform may not play 95% of the time, but then occasionally will suddenly have the waveform and play a couple times before reverting back to no audio.
A suitable solution for this personal amusement project would just be to drop a new soundtrack over the thing but, before I even got that far, I tried exporting as avi's and mpeg4's but then get error messages such as:
Premiere Pro has encountered an error.
[..\..\Src\Win\WinFile.cpp-785]
Error compiling movie.
Unknown error.
In case it was a memory issue, I tried starting a new project, only importing 2 videos, but had the same audio and exporting issues.
I'm getting really frustrated as I spent a lot of time importing/subclipping and then even more time prepping before that.
For those who are bound to ask, while new to Premiere, I'm not a novice with editing. I've used Final Cut Pro at work for many years (without such issues).
Thanks for your help.

You might start at http://www.xvid.com/
Tools to Convert to DV-AVI http://forums.adobe.com/thread/415317
Convert http://premierepro.wikia.com/wiki/FAQ:How_do_I_convert_my_files%3F
Convert SD (Standard Definition) files to DV-AVI Type II with 48KHz 16-bit Audio
As well as the links just above, use Google to find conversion software
I have NOT used the products below, I only forward due to other mentions... so YMMV and all the usual disclaimers... check the links and read to find out if one of the products listed below will rip or convert the files you have to something you need for editing
http://www.corel.com/servlet/Satellite/us/en/Product/1175714228541#tabview=tab0
http://www.womble.com/products/mvw.html
http://www.magix.com/us/movie-edit-pro/ plus $5 Ship
http://www.nchsoftware.com/prism/index.html
http://www.videoredo.com/en/index.htm
http://www.daniusoft.com/media-converter-ultimate.html
http://www.deskshare.com/media-converter.aspx Digital Media Converter
http://www.topsoftwareol.com/product/Video/Video_Converter_Standard.html
http://www.erightsoft.com/SUPER.html Multi-Converter <-- supposed to be very good
http://download.cnet.com/FreeStar-Free-Video-Converter/3000-2194_4-10854990.html
http://www.videohelp.com/tools/XviD4PSP

No Audio from Audio Jack

After plugging in headphones to my macbook pro today i discovered no audio in the headphones.
These are the things I've tried:
1. Using a different set of head phones
2. Used external speakers
3. Reboot
4. Repair permissions and reboot
5. Reset PRAM
When headphones are plugged in the computer recognises the headphones as seen in the sound control panel in system preferences.
Does anyone have any suggestions?
Tool Box

Hi Jimmys_51,
Take a look at this document and let me know if the troubleshooting steps help resolve your issue.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

No audio from safari or firefox

Quite suddenly, I'm unable to get any audio from websites. Youtube - and other video sites - play the pictures but not the sound. It's the same whether I use Firefox or Safari. Yet all the audio stored on my Powerbook - whether in itunes or in various video clips - plays perfectly normally. Any ideas?

I was having the same problem, did a little more digging and found this:
Video but No Sound on YouTube, MySpace and Flash Video on Mac OS X inside Safari or Firefox:
When watching web pages with embedded Flash video or animation such as movie or video clip on YouTube and MySpace using Mac OS X, users may hear no sound. The no sound audio output problem happens despite video playback is fine, and the issue can happen on any web browser, i.e. Safari and Mozilla Firefox. Strange thing is that, when using other applications such as RealPlayer, QuickTime Player and VLC Player, the sound is played properly. And no audio output issue does not affect embedded QuickTime including HD contents on the web.
Apple Mac OS X support site explains that the no audio from certain multimedia content issue is caused by some audio applications that change the computer’s audio settings to a sample rate that is too high for other applications to use. The notorious programs include certain versions of Real Player, VLC Player and Audacity.
The solution to solve the Internet movie no sound or audio output is to reset the audio setting in Mac OS X to original configuration:
1. Open “Audio MIDI Setup” (/Applications/Utilities/), then check the “Audio Output” setting.
2. Change the “Audio Output” setting to 44100.0 Hz.
3. Quit Audio MIDI Setup.
If the Audio Output setting is grayed out or disabled, go to “Properties For” tab in Audio MIDI Setup, and select “Built in Output”.

Audio Blank during PSTN Bridge call

Hi All,
Our users are joining a PSTN Bridge call which requires them to be logged in continuosly for 5-6 hours. At times the call goes blank and users have to relogin the bridge again. Given below is the call flow where the User from Cluster 1 dials the number which in turn goes to Cluster 2 where the PSTN Bridge is present
Cluster 1
IP Phone --> PSTN Bridge Number -->CUCM--> MGCP Gateway --> Service Provider
Cluster 2
Service Provider --> MGCP Gateway --> CUCM --> Avaya Aura Conferencing Bridge
I have checked the following,
1) The MGCP PRI in cluster 1 and 2 have not fluctuated
2) The phone has not lost connectivity with CUCM
Any thoughts on what else needs to be checked to isolate this issue.

Are you working with Office365 and an ACP (Audio Conferencing Provider)? If so, you could call in with a PSTN phone using the phone number the ACP provided. If you use a Lync approved phone, you could potentially connect as well, but not
by dialing the number of the meeting, or any other number as this would be considered enterprise voice. You would typically connect by using your Lync client and the better together experience to join the meeting. In this scenario, a USB device
might be better and cheaper than an IP phone.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Recording Audio from Video Tape

Hi! I want to record audio from a video tape and put the audio into my imovie. I have done this funtion before, but I can't seem to remember how! I am able to play the movie (the video tape) in a VCR which then goes through my "bridge" (DV Converter) and into the computer. When I open imovie and import the video and audio into a "clip", I can't seem to play the clip and record the "audio" in the audio section. Again, I have done this before, I just don't remember how. Can anyone help??

Hi Kim - welcome to the forum!
You would simply extract the audio from the clip - select it, then go Advanced>Extract Audio (Command J). This will place the audio in the top audio track. Then you can delete the clip, and move the extracted audio to wherever you want it.
Does that help?

How can I record an Adobe meeting with audio from BT MeetMe?

I am trying to record an Adobe Connect meeting however would like to record the audio from a BT MeetMe conference. Is there a way to tie the two together?

You may be able to use the Universal Voice tool. When logged into Connect Central, go to My Profile > My Audio Providers > New Provider. Put in the relevant information for calling into your BT confrence bridge.
Full instructions on filling in the fields can be found here (you don't need to do this in the Admin section though): http://www.connectusers.com/tutorials/2009/11/uv_admin_setup/
Then when that process is done, go to My Audio Prioviders, in My Profile and select New Profile. Select the profile you just created and click Save. Then, at the bottom of the Edit page for your meeting room, you should have the option to integrate your BT phone bridge into the connect room.
You can connect the phone bridge via the Audio menu in the meeting room, and if everyone is going to be on the phone, I would disable the audio broadcast for the bridge, so attendees don't hear the audio through their phone and computer. The audio will still be recorded with the presentation.

Recorded Meeting plays audio from connect url but offline does not

Hello,
I recorded my meeting using audio from telephone conference (which is a nice new feature for 7.5 if not using one of the supported phone conferencing systems). When I play the recording from the adobe connect site URL (or choose edit) the audio plays. When I do a "make offline" it creates the presentation only with no audio. Is this a limitation that I did not read about or am I doing something wrong?
thank you

use this code "Component control = player.getVisualComponent(); "
instead of this code " Component control = player.getControlPanelComponent();"
But if you want show both of them, modify as following
Component control1 = player.getControlPanelComponent();
Component control2 = player.getVisualComponent();
then add the two control (control1 & control2 ) to your JFrame panel

How Do I Transmit Audio from My 2008 MacBook Pro to My 2011 Samsung HDTV?

Hello,
I'm trying to transmit audio from my 2008 late model MacBook Pro to my 2011 Samsung HDTV. My MacBook's Model Identifier is MacBook Pro 4,1 (ancient, I know). I purchased this DVI to HDMI cable which does a beautiful job of transmitting the video to my HDTV, but no audio (as advertised): http://www.amazon.com/gp/product/B000E8SY5Q/ref=oh_o02_s01_i00_details HELP!!
Thanks very much.

I figured it out! I plugged in my 3.5MM auxillary cable I use to plug my iPhone into car stereo jacks from the headphones port on my MPB to the "PC/DVI Audio In" on the back of my Samsung HDTV and voila! It worked! No additional cables (other than these two). No upgrading OS. Yay!
Here's the auxillary cable: http://www.amazon.com/AUDIO-3-5MM-JACK-AUXILIARY-CABLE/dp/B002Q3K0QS/ref=sr_1_1? ie=UTF8&qid=1330576344&sr=8-1
This looks like a great workaround to the MPB to HDTV audio problem! Hopefully my geek status is still intact. W00T!
When in doubt, try all the cables you have in all the different ports. AV hasn't changed much over the years and you can often rig things to work with what you already have. Yay for keeping cables out of landfills and repurposing!

When I upload audio from itunes into my imovie project, it does not show all of the track?

Hi, I have opened a new project in imovie - I have uploaded 200 photos into the project to make a Comic Book movie!
this project is 7 mins and 8 seconds long - the exact length of the audio track that I want to play during the movie!
I have selected the music by clicking the musical note button in imovie, which open up my itunes library and displays the track I want to use that is 7 mins and 8 seconds long.
When I click and drag my MP3 audio from itunes into my imovie project, i only plays the first 5 mins & 33 seconds; leaving my project in silence for the final 1 min & 3 seconds????
I have not added markers, there are no fade ins or fade outs - only the first 5 min & 33 seconds or a 7 min & 8 seconds MP3 Audio track???
I have spent 10 hours trying to rectify this problem.......
can anyone help me with this problem
Peace, Love & Happiness
Jayondrums

Sounds like your talking about iMovie for Mac?
This is the iOS version, repost here:
iMovie

Delete unused audio from GB sessions from hard disk

I would like to clear the unused audio from many Garage Band sessions from my hard disk. When audio is recorded in GB where is it stored?
Thanks
Mac OS X 10.4.11 MacBook 2 Ghz Intel Core duo
Garage Band 3.0.4 (104.7)

Normally, GB does a pretty good housekeeping job with the audio files: If you are not using a recording at all in you project, it gets deleted next time you save your project. (That means: not using even a fraction of a second - otherwise the whole audio is kept, since GB's edits are non-destructive.)
Having said that - if you want to check, the audio recordings are in a folder inside the project package: ctrl-click the project in the Finder, select "show package content", and look inside the media folder. Be careful - deleting stuff from that folder that you think the project isn't using might confuse GB.

I have HDMI connection to the receiver and on to the TV - but no audio from my new Apple TV. I have checked all connections and the video is xlnt. Have also toggled thru every possible Dolby/Audio combination in settings. Help! Any suggestions?

I have an HDMI connection to the receiver and on to the TV - but there is non audio from my Apple TV. Not for movies, music, YouTube etc.   I have checked all of the connections and the video is xlnt. Have also toggled thru all possible Dolby/Audio combinations in settings. Help! Any suggestions?

Hello again Parker -
The basic setup is Digital Cable Box, DVD Player, Denon Receiver/Amp and TV Monitor. To that I added the Apple TV. The Receiver only has two HDMI IN slots (one for cable and one for the DVD) and one out to the Monitor.
[I bought a switcher to toggle the DVD and the AppleTV back and forth but just disconnected the DVD to simplify when I ran in to trouble.]
So now I have:
     HDMI from the Cable Box to the Receiver
     HDMI from the Apple TV to the Receiver (in the old DVD slot which always worked well)
     HDMI from the Receiver to the Monitor
     RCA's from the Receiver to the Subwoofer and the other speakers
In addition I have some backup connections:
     S-Video, Optical Audio and L/R RCA's from the Cable Box to the Receiver
     S-Video from the Receiver to the Monitor
Wait - JUST FOUND IT!
By going thru the excercise to track all of the connections per your suggestion, I found an anomaly when I switched Receiver sockets for the HDMI links. The video moved but the audio didn't. Turns out the monitor was using the optical audio feed from the receiver. So I disconnected the optical audio and the monitor automatically switched to the HDMI audio feed!   Looked promising...
So I first connected an optical audio feed from the ATV to the receiver - Audio! Then I pulled it, but the audio didn't switch to the HDMI feed. It stopped. Would be OK if all I was going to use is the ATV, but I need the DVD player too and I can't use a switcher to toggle between them if I have to unplug the optical audio each time.
This is becoming a career! Any suggestions?
Will

No audio from ipad2 to TV when using HDMI

No audio from ipad2 to TV when using HDMI

Hi
I'm having exactly the same problem.
I have 2009 macpro
I worked out I can get visual from HDMI 3 and no picture.
Sound comes though PC1
Did you fix the problems?

How can i stream video and audio from macbook air to my tv?

how can i stream video and audio from macbook air to my tv?

Wirelessly: you need an AirPlay - enabled device such as an AppleTV.
Wired: if your TV has an HDMI port, you need a Thunderbolt to HDMI adapter such as this one:
Mini DisplayPort to HDMI® Adapter w/ Audio Support
If your TV does not have an HDMI port you will need a converter that will convert HDMI input to whatever input your TV requires.

Video/Audio from new macbook to HD TV?

So, I'm wondering how i can connect the new MacBook to my HD TV which supports HDMI. Can i connect a mini DisplayPort/HDMI adapter and get both video and audio into my TV?
I haven't seen any adapters of that kind in Apple Store.
Is there perhaps another way to archive this?

Barring some other adapter being released, either by Apple or a third party, you'd get the Mini Display Port to DVI adapter and then use a DVI to HDMI adapter/cable. You'll also need to connect the audio to the TV separately, so check to make sure your TV will allow audio from a different input when using the HDMI input for video; not all do.

FME 3.0 Audio from Audio Conferencing Bridge issue

Similar Messages

Maybe you are looking for