FME and Digital Rapids DRC 5550 card

Has anybody tried to use FME with a Digital Rapids DRC-5550 card?  I assumed that since some of the lower end digital rapids cards are compatible, that the higher end ones would be as well, but I keep getting a "capture card not found" error when I launch Flash Media Encoder.  I'm using a StreamZHD sever and trying to get FME to recognize the stream.
thanks

Does DRC 5550 has direct show drivers. FMLE can work with only those devices which are direct show compatible.
You can even check whether device is getting listed in device manager under "Sound, Video and game controllers or not"
Devices like DRC 500, DRC 1600 supports direct show drivers and hence works fine with FMLE

Similar Messages

  • AVI's (10bit) made with Digital Rapids say 'Media Pending' and never play on PC

    I am running all 3 versions of Premiere Pro on our work PC (CS6, CC, and CC2014). We use this system to edit AVI's made with
    Digital Rapids Stream 3.7.47. Before, we could load any AVI and it would read 'Media Pending' for a few seconds then load right up.
    Now, it sits on the yellow screen and never loads. I've tried 6 or 7 different AVI's and none worked in any of the 3 versions of Premiere. The only glimmer
    of hope was one loaded on After Effects CC2014, but that's it.
    So, I should also mention these are 10 bit AVI's. I HAVE been able to load 8 bit AVI's but the 10 bit are all problematic in Premiere.
    Please help... Deadlines approaching...
    Thanks!
    Mark
    [email protected]

    DustinMedlam, I have the same exact problem. I started using my Iphone 4S for shooting video about 2 months ago and tranferred them to my Windows machine with Windows 7. I use the clips in Sony Vegas pro 11 and make short movies. I upgraded to ios 6 last week and every video that I shoot with my iphone 4S now is not usable in Quictime or Sony Vegas???? My old videos from before ios 6 play just fine and I can use them in Sony Vegas with no problems. The only way to play the files is with Windows media player. this does me no good as I just began making short films and now I can not use any of the video I have shot since ios 6. I also have a Samsung Galaxy S2 and I shoot video with it and use the clips in Sony Vegas with no issues!?? I can not believe this is not BLOWING up on the internet like the WIFI issue is..... What do we do? All my video gear is for my Iphone not my galaxy S2. This is very annoying. I also notice that no one from Apple response to these support forums. So why are they available?? What a JOKE!

  • Why did myEE ask for my sort number and last 4 digits of my debit card

    When trying to set up myEE I was asked for my sort number and last four digits of my debit card, I got the myEE app from the App Store for my ipad

    It asks you for this information if you say you are the bill payer when setting up your account. This information is used to check and match the details with EE's payment systems so you can then access your bills/payments online.

  • Anyone tried Digital Rapids for encoding?

    My 15 minute HD projects is now in its 7th hour of ten to convert to Flash 8. Has anyone tried the Digital Rapids real time PCI capture card? Is there anything else on the market that can take a component signal and convert it to multiple formats at the same time?

    I don't see any Macintosh support for that product.

  • X-Fi XtremeMusic and Digital Out

    Please forgive me if this has been asked before, but here goes...
    I have a WinXP machine with an X-Fi XtremeMusic card that I would like to hook up to my Onkyo TX-SR600 receiver. The ideal situation would be to run a single digital line into the coax digitial input of my receiver. I would like all sounds to pass through the receiver and let the receiver do the decoding if possible.
    Do I need to hook up analog cables for the 6 channels in addition to the digital line?
    Thanks for any help,
    - James T

    No, just run the digital coax to the rec. If you don't have one, you will need a digital coax and a /8 mono to RCA adapter. Radio Shack has these items.
    If you play games and want surround sound, you will have to go to analog out. I acutally have both analog out and digital out. They work well.

  • Files encrypted and digital signed with cFolders

    Dear all,
    Currently I'm involved on a PPS project with cFolders. This project has legal requirements that consist in implementing encryption and digital signature in files which will be uploaded to cFolders. I've been searching on SAP Help, SDN and Service Marketplace about APIs to work with cFolders with encryption and digital signatures, but I didn't find related documents. It seems there is no documentation regarding such scenarios...
    Anyone has experience in cFolders with files encrypted and digital signed?
    Thanks in advance & regards,
    Ricardo.

    Hi Federico
    If I understood your solution you are signing your documents in a Webservice provided from a CA. For that youu2019ve created an RFC dest type G over ssl (https) and used the class CL_HTTP_CLIENT. So your requirement is only to sign documents, right?
    Well my scenario seems a little bit different as Iu2019ve to encrypt the file and also sign it. The signature is done on useru2019s laptop trough a smartcard (hardware device connected via USB that reads the chip the certificate assigned to our identity card) and cannot be signed from other entity than the user itself.
    Did you explore the PGP alternative? cFolders supports this kind of files (*.pgp). The PGP (Pretty Good Privacy) is a popular program used to encrypt and decrypt files, e-mails, etc.
    Today I installed a trial version of a PGP tool. I tested the encryption/signature with files on my desktop and it works fine. I tested a Public Key scenario where the owner publishes his PK in cFolders and the requester gets this PK in cFolders as well. The requester now can encrypt documents and upload them to cFolders with the public key provided by the owner; the owner itself has the private key to open the encrypted file (extension .pgp) after upload. But over the encrypted file the requester must sign it with his private key (another certificate) provided by a CA and here starts the second challenge...
    In cFolders after the file upload the system should gets the requester digital signature and sends it to CA for validation, only after that we know if the requester is a trusted partner or not. To do this we are thinking to use a Webservice provided by the CA, however I don't know how to extract/get the signature in the file encrypted/signed from PGP and uploaded to cFolders.
    Do you have any idea?
    Thanks & regards,
    Ricardo.

  • Why is the memory capacity of a digital camera's memory card relevant?

    Hi All,
    I'm new to all this . I have a question "Why is the memory capcity of a digital camera's memory card relevant?"
    Thanks
    Maggie

    Why is the memory capcity of a digital camera's memory card relevant?
    It is not to Photoshop.
    But to the photographer it is extremely relevant.  It determines how many images (influenced by "quality") your camera can hold before running out of room to store pictures. A larger memory capacity for your camera will allow you to take and store more and/or higher quality images.
    ("Quality" in this case is determined by  image size- the number of pixels making up the image in your camera and image "compression" -  how much JPG formatting will effect your image.)
    (attempted analogy coming... watch out!)
    Think of the camera memory card as a linen closet to store down pillows. A small closet you can store 10 pillows on a shelf. Double the size of the closet and you can store 20 down pillows.
    You also have the choice to stuff the down pillows in small sacks, allowing you to store even more pillows in the closet. The problem is after cramming the down pillows into the small container, they come out battered and not as nice as they were before storage.
    Linen Closet = Memory Card
    Down Pillows = images
    Small sacks to stuff pillows into = JPG compression.
    (and to add this this questionable analogy... the better down pillows have more feathers, and take up more room in the linen closet)
    Feathers = pixels

  • Please helpe me - Audigy 2 ZS and Digital I/O Mod

    <SPAN class=time_text>
    <SPAN>Hi,
    <SPAN>
    <SPAN>I bought the Creative Digital I/O Module, in the Creative Website, to have Digital sound from my sound card - SB Audigy 2 ZS - but now that I installed the I/O Module in the Digital Out of my card, I have no signal.
    <SPAN>It seems that Creative Digital I/O Module do not work with Creative SB Audigy 2 ZS, it'ss wright? Is any chance to have digital sound with this card and may speakers - Teac PowerMax 500, which have a decoder?
    <SPAN>
    <SPAN>Tanks
    <SPAN>
    <SPAN>JP
    <SPAN>
    <SPAN>(
    ps.
    I have read in one Portuguese magazine (PC Guia) that have made a configuration to have a PC to one room, with digital sound, and their used de Creative Aud. 2ZS with de Creative Digital I/O Module, but now I think the their are telling a big lie, since it seems that I/O Module doesn?t work with that card.)
    Message Edited by pedrom on <SPAN class=date_text>2-2-2005<SPAN class=time_text>02:57 PM
    Message Edited by pedrom on 2-2-2005 02:57 PM

    do you mean this?
    http://uk.europe.creative.com/shop/product.asp?prod=773
    base on the specification requirement there....it doesn't support audigy 2 zs....

  • FMS; multicast streaming from Digital Rapids

    Has anyone had experience configuring multicast streaming from Digital Rapids encoders to an FMS 4.5 server? I can stream RTMP to the FMS server and access the video with an embedded Flash player easily enough, but I'm interested in setting up the FMS to allow clients to access a multicast stream. Most Adobe support documentation refers to Adobe Media Encoder Live for the multicast connection configs, not necessarily non-Adobe encoders, so I'm missing a step or two.
    Thanks,
    Hugh

    Following is the link to setup multicast streaming:
    http://help.adobe.com/en_US/flashmediaserver/devguide/WS7812b00092aae0 dc-2829dcd012a54a3ed1a-8000.html
    Instead of publishing from Flash Media Live Encoder, you can publish from DR Encoder by making an "rtmp" connection to the "multicast" app on the AMS server and then start publishing to that app from the encoder using the "Publish Stream Name" generated by Multicast Config Tool.

  • What is differnce between Dashboard and digital dashboard

    Hi experts
    Please tell me
    1.What is difference between Dashboard and digital Dashboard.?
    2. What is difference Between Dashboard and balance Score card?
    Regards
    Frnds

    Hi
    i am not sure that these links helpful to you... but have a look at this
    http://www.enterprise-dashboard.com/2008/03/
    http://www.enterprise-dashboard.com/2008/03/page/2/

  • Will Digital Editions Recognize SD Card on Nook?

    This seems like an obvious question but I'm having trouble finding an answer. I use ADE to download library books, first to my PC and then to my Nook. A recent download was a large guide book (170K) and after that I found out the basic Nook (Simple Touch) only has about 250K for ADE books. I decided to add a 16 GB Micro SD card to the Nook. When I connected the Nook to my PC, Windows Explorer shows the Nook and a Removable Disk (SD Card). ADE only shows the Nook as an attached device. I decided to download a number of large books. The only way I could do it was to use ADE to download it to the Nook where they would end up in the Nook's Digital Editions folder and I would have to drag and drop the EPUB onto the Removable DIsk (SD card) using Windows Explorer so I would have enough room to download the next book. Is this the only way to do this? Is there any way for ADE to recognize the SD Card? In my "borrowed" folder of library books in ADE, the books that I had to move onto the SD card say the source is "missing" (because it's not in the Digital Editions folder on the Nook). If I de-authorize the Nook and reauthorize it, will it recognoze the SD Card? Do I need to move the Digital Editions folder to the SD card? Do I have to add a Digital Editions folder on the SD Card? I can find the books to read on the Nook but this is a pretty strange way to do things.

    After posting this question I found a suggestion on the Nook Forum, tried it and it worked. I figure that I might as well share it. In Windows Explorer you need to name the SD Card "NOOK SD" (right-click on "removeable disk" and use "rename") and then copy the folder ".adobe-digital-editions" (with its contents) from the Nook to the SD card. When you start up ADE, both the NOOK and NOOK SD show up as devices. The sources for the "borrowed books" are no longer missing and the books can be read from the SD card. I'm not sure why this isn't explained anywhere but I'm happy now.

  • Using PWM and digital outputs of myDAQ to power multiple solenoids

    Hello,
    I am attempting to use LabVIEW and myDAQ to power 3 independent solenoids with PWM. I am new to Labview, so I am having trouble grasping the best was to use a digital output to power my solenoids. I have many codes to generate PWM to digital output, but I cannot figure out how to actually power my solenoid from these signals. Any help would be greatly appreciated. 
    Zach

    Google ULN2003 which is a relay/solenoid driver chip. The digital outputs of your card feed to the inputs of the chip, Review the max current/voltage specs of your solenoids and compare to teh driver chip max ratings to ensure the chip can power them.
    How fast do you plan to PWM the solenoids? Can they achieve your PWM rate?
    -AK2DM
    ~~~~~~~~~~~~~~~~~~~~~~~~~~
    "It’s the questions that drive us.”
    ~~~~~~~~~~~~~~~~~~~~~~~~~~

  • Streaming from Digital Rapids to Flash Media Server

    Hello,
    I am using a Digital Rapids StreamZ encoder (version 3.8.0) to stream towards YouTube, Dailymotion, Akamai. I wish to install a Flash server on the same VLAN as my Digital Rapids in order to check the encoding in case there is an issue on YT/DM's side. I therefore downloaded Adobe Flash Media Server and now wish to send my stream towards the AMS. Which Server URL and Stream Name should I use to configure my Digital Rapids? How should I configure the AMS to receive the stream from the DR?
    Many thanks in advance for your help and advice,
    mdicamp

    The Digital Rapids doesn't seem to recognize my destination Server URL. I guess it is because of a port issue.
    Checking the ports situation on my AMS Server (cmd -> netstat -an), I realise port 1935 (which receives RTMP) is only listening locally (127.0.0.1:1935) instead of to the exterior (I would like to have 0.0.0.0:1935). The application does not seem to have forced the port to open (I don't have any firewall).
    I hope this helps move anyone forward in helping me out. Thanks in advance !

  • I used to have an application in my iPhone 4 and 4s that captures business card and creates its content to my contacts. Its no longer working with my i5. Can you recommend me a new apps for this same function

    I used to have an application in my iPhone 4 and 4s that captures business card and creates its content to my contacts. Its no longer working with my i5. Can you recommend me a new apps for this same function

    Try CardMunch it works well for me

  • I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM

    I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM card and need to disconnect and insert my SIM. I don't understand why this keeps happening and it's been going on for a wile now. I have tried over and over again to get this iPhone to work but nothig is happening. I've even gone on the website for support (apple.com/support) but cannot find anything that will help me with this situation. Can someone please help me find a solution to this problem? I have been without a phone and do not have money to buy another one and it is crucial for me to get it fixed. Thanks.

    wesb
    What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
    Let us go through the typical drill so as to take nothing for granted.
    1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
    school or company network?
    2. Are you running the program as Administrator and is there any "domain" account involved?
    3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
    4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
    Let us start by ruling in or out any of the above, and then we can decide what next.
    Any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR

Maybe you are looking for

  • Where are the drivers for the zen micro pho

    are they in the player itself or on theinstallation disc?my usb is looking for the device drivers but i cant find them. the computer wont recognize my micr photo without them? thanks for your help

  • Is the iPad mini wi fi able to take a SIM card ?

    Can I use a SIM card in an iPad mini? It is the wi fi model only.

  • LinksysQuickVPN

    The latest QuickVPN client says it is compatible with Vista. However I can not get it to work. Everytime I launch a connection I get an error. " wget.exe has stopped working" I have uninstalled and reinstalled but it doesnt seem to fix this. Anyone k

  • SMT1 creating trusted system error No authorization for object S_ADMI_FCD

    SMT1 creating trusted system gives error No authorization for object S_ADMI_FCD even after giving authorizations in both the system. Was not able find the issue by debugging. Thanks and appreciate your response. Betcy Moderator message: not directly

  • Full text search in mobile sales?

    Hi! CRM 4.0, Mobile sales, business partners, ... I've to include a fulltextsearch in the search tile capsearch2. The search should look into the longtext-notes created for most partners. I think i need an enhanced bscapgen/capgen_query ... the real