FME freezes when connecting Canon HV20 via firewire

Hoping someone can help me out. I'm using a Canon HV20 camera
as a live video stream via FME and every time I try FME will freeze
and my laptop will freeze and I have to restart. My camera settings
are DV standard and it should work.
The necessary drivers for the Canon HV20 are installed and
I'm using a firewire card in my PC laptop that to connect the
camera feed. Restarting several times still results in the same
problems.
Is there something I should modify/check on my system to
ensure it's working correctly?

Some more troubleshooting tips.
Cheers
Eddie
Forum FAQ
Premiere Pro Wiki
- Over 250 frequently answered questions
- Over 100 free tutorials
- Maintained by editors like
you

Similar Messages

Can't recall password when connecting 2 Macs via Firewire (Snow Leopard)

In Leopard I used to be able to connect my iMac and my Macbook to each other with a Firewire cable and share/move large files between them. Since the upgrade to Snow Leopard when I connect the two machines up I'm prompted to enter a password which I can't recall setting. I've tried all my usual password variants to no avail
Is there anyway I can find the password that I set or can I change one of them?
EDIT: If I connect as a Guest I can see the shared folder on my machines (I have Filesharing turned on). An easy workaround would probably be to add the folders I need to play with to the Filesharing list but I'm more concerned about the password issue
Message was edited by: robbo™

Essentially I am connecting the 2 Macs to each other with a Firewire cable. In Finder, under Shared, I can see my Macbook and I can connect as a guest but the password that should work simply doesn't

10 3.9 - external drive crashes PB when connected by USB or FireWire

Subject says most of it... "10 3.9 - external drive crashes PB when connected by USB or FireWire"
Details: I have one external drive which, when connected to my PowerBook via either FireWire or USB, causes the computer to lock up with the message: "You need to restart your computer. Hold down the Power button for several seconds or press the Restart button." The same thing happens whether the drive is there on bootup or if it is connected later.
The drive worked fine until yesterday, when I stupidly installed Windows Media Player even though the internal drive was almost full. It took a while, but I discovered that disconnecting this particular external drive made everything work again, though slowly.
Then I freed up 15GB on the internal drive, and everything works normally _unless that drive is attached. Another drive connected the same way works fine.
I have searched around on this message but have yet to find the way out. I did figure out what the first question will probably be, so here's the answer:
The "kernel panic message" each time seems to be the date and time and then "localhost /usr/libexec/panicdump: Error (-1) setting variable - 'aapl,panic-info'"
Where should I start?
Thanks.
15" Powerbook Mac OS X (10.3.9) External drives connected via USB or FireWire

Still hoping for some sort of advice here... Have tried many approaches but can only confirm that simply connecting that particular drive (or enclosure?) always gets an immediate shutdown.
Thanks for anything,
Steve

My iPhone 5 is freezing when connected to the charger. This is not happinning if it is connected to the computer USB. How to solve this problem?

My iPhone 5 is freezing when connected to the charger. This is not happinning if it is connected to the computer USB. How to solve this problem?

Possibly faulty charger. The supplied Apple Charger is covered by the iPhone Warranty. Make Genius reservation or set up service and take or send iPhone and Charger to Apple for resolution.

Macbook freezes when I start phoning via Skype

Macbook freezes when I start phoning via Skype but it’s continuing ringing. Here’s the log file for this time
23.11.13 17:26:54,943 xpcproxy[16877]: assertion failed: 13A603: xpcproxy + 3438 [EE7817B0-1FA1-3603-B88A-BD5E595DA86F]: 0x2
23.11.13 17:26:55,084 com.apple.launchd[1]: (com.apple.WebKit.Networking.F6B93F72-8D4D-4EA3-A78F-71544BB270CC[16776]) Could not terminate job: 3: No such process
23.11.13 17:26:55,084 com.apple.launchd[1]: (com.apple.WebKit.Networking.F6B93F72-8D4D-4EA3-A78F-71544BB270CC[16776]) Using fallback option to terminate job...
23.11.13 17:26:55,087 com.apple.launchd[1]: (com.apple.WebKit.Networking.F6B93F72-8D4D-4EA3-A78F-71544BB270CC[16776]) Exited with code: 1
23.11.13 17:26:55,293 com.apple.iCloudHelper[16877]: *** WARNING: CFMachPortSetInvalidationCallBack() called on a CFMachPort with a Mach port (0x7c17) which does not have any send rights. This is not going to work. Callback function: 0x7fff89eca981
23.11.13 17:26:55,305 secd[207]: securityd_xpc_dictionary_handler AuthBrokerAgent[16878] copy_matching The operation couldn’t be completed. (OSStatus error -34018 - client has neither application-identifier nor keychain-access-groups entitlements)
23.11.13 17:26:55,309 AuthBrokerAgent[16878]: SecOSStatusWith error:[-34018] Не удалось завершить операцию. (OSStatus, ошибка -34018 - Remote error : The operation couldnвАЩt be completed. (OSStatus error -34018 - client has neither application-identifier nor keychain-access-groups entitlements))
23.11.13 17:26:56,515 syncdefaultsd[16876]: *** WARNING: CFMachPortSetInvalidationCallBack() called on a CFMachPort with a Mach port (0x6417) which does not have any send rights. This is not going to work. Callback function: 0x7fff89eca981
23.11.13 17:26:56,518 secd[207]: securityd_xpc_dictionary_handler AuthBrokerAgent[16878] copy_matching The operation couldn’t be completed. (OSStatus error -34018 - client has neither application-identifier nor keychain-access-groups entitlements)
23.11.13 17:26:56,519 AuthBrokerAgent[16878]: SecOSStatusWith error:[-34018] Не удалось завершить операцию. (OSStatus, ошибка -34018 - Remote error : The operation couldnвАЩt be completed. (OSStatus error -34018 - client has neither application-identifier nor keychain-access-groups entitlements))
23.11.13 17:27:40,000 bootlog[0]: BOOT_TIME 1385202460 0

Maybe you need a new VGA adapter? Can you bring your MacBook and adapter in to an Apple store and have them test your adapter and a known working adapter?
-Doug

Grrrrrr.... ipod Mini freezes when connecting to mac

when i connect to synch with itunes -
itunes does not recognize ipod
ipod freezes with regular screen (not the "do not disconnect" screen)
itunes recognizes my 40GB ipod and synchs fine; just not the mini
i have done the following with no success -
reset the mini (over and over)
put it in disk mode
reinstalled latest updater (ipod still freezes when connecting)
what could be the matter? please help ...
iBookG4 Mac OS X (10.3.9)

See these.
iPod doesn't appear in iTunes or on the Mac desktop.
iPod does not appear in iPod Updater or iTunes in Mac OS X.
iPod appears on the Mac OS X desktop but not in iTunes.

IPod Classic 80 GB Freezes when connecting to Computer

Hi.
My iPod Classic 80 GB Freezes when connecting to my computer (Vista... yes... I know). I've got my iPod for over a year now and I've never had real trouble with it.
When I plug it in (iTunes already running) my computer gives me the 'thumbthumb' noise because an USB thingamajib is connected to the computer. At this moment my iPod freezes and stays on. iTunes doesn't seem to find my pod. When I disconnect my iPod, it'll stay on (doesn't go energy safe mode) and stays frozen until the battery is empty. But by then, I've already lost my playing info (Which I really value).
Pllllllease help me out her.

Someone has finally found a solution to this problem and i decided that i would spread the word around ... so here are the steps:
1) Quit iTunes.
2) Delete iTunes from your Applications folder.
3) Go to your ~/Music/iTunes folder. Delete or rename the "iTunes Library" file.
4) Open the "Previous iTunes Libraries" folder and look for the backup of your old pre-9 library; it should be dated at about the time you first ran iTunes 9. Copy it back out to the ~/Music/iTunes folder, and rename it to "iTunes Library".
6) Go to <http://support.apple.com/downloads/iTunes8_21> and download iTunes 8.2.1. The page says it's for G3, but the Read Me file says it'll run on G4, G5, and Intel too. Open the diskimage and run the installer.
You should now be able to run iTunes 8.2.1 again.
And your iTunes will restore to before you upgraded and you won't lose anything.
*If you download the iTunes file from the "support.apple" link, and you can't open it, go to http://www.mydigitallife.info/2009/06/28/apple-itunes-8-2-and-quicktime-7-6-2-di rect-download-links/ and download "iTunes 8.2 for Windows: iTunesSetup.exe
WhittWhitt

Computer is crashing (freeze) when connecting my iPod Nano

Hello,
my computer is crashing (freeze) when connecting my iPod Nano. I have a Pentium IV with windows XP Pro. Can anybody help me please.

This came from another thread, but worked for me. Problem is with newest iTunes 4.62. Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update). Reboot, and reinstall iTunes. It will reinstall all the other ones and you should be able to connect your nano. Good luck.

Ipad 3rd gen shows blank screen when connecting to projector via HDMI AV adapter. I have an ipad 2 that works perfectly. Projector is a Dukane ImagePro 8106HA. Only difference I see is that the ipad 3 owner has not updated to IOS 6. Any thoughts?

Ipad 3rd gen shows blank screen when connecting to projector via HDMI AV adapter. I have an ipad 2 that works perfectly. Projector is a Dukane ImagePro 8106HA. Only difference I see is that the ipad 3 owner has not updated to IOS 6. Any thoughts?

Ipad 3rd gen shows blank screen when connecting to projector via HDMI AV adapter. I have an ipad 2 that works perfectly. Projector is a Dukane ImagePro 8106HA. Only difference I see is that the ipad 3 owner has not updated to IOS 6. Any thoughts?

MBP freezes when connected to VGA projector

My MacBook Pro (15" 2.4Ghz SR, 4Gb) freezes when connected to a VGA projector, doesn't matter whether the DVI-VGA adapter is connected to cable first or last. Boot time while connected to the projector is also inordinately long. I have seen this happen a number of times specifically with other Santa Rosa MBPs.
I haven't called Apple yet on this and I suspect it will require a firmware update to fix; is this a known issue (and is it known to apple?)
thanks
--p

Just to update this thread with what I've posted elsewhere:
On my machine this problem only happens if the computer has been put to sleep before being connected to a projector. That is, put to sleep after being booted but before connection to the computer. It can be connected after booting without sleep. Once it has been successfully connected to a projector, it can be disconnected, put to sleep, awakened and reconnected with no problem.
I think that this "first sleep after boot" issue is what makes the occurrence of this problem so variable.
Some people just leave their computer on for long periods, only putting it to sleep when not using it. If they connected to a projector before putting it to sleep the first time they wouldn't see this problem.
Jim

Computer doesn't recognize ipod and ipod freezes when connected via USB

My ipod has developed a problem.
1. When hooked up to a computer it suddenly is not recognized by the computer--there is no "sync" noise and it odesn't appear in itunes. Also, all the buttons cease to function.
2. Interestingly, it still works fine in my Boise player and also when in the car via audio cable.
3. When i unplug it from the computer it works fine again.
4. I tried a manual reset into disk mode hoping that i could "start over." Bad idea--still no connection AND now everything is off it.
Any ideas to help with this?
Thanks a ton.

I have tried with two different cords and in different USB ports. I think it is an ipod problem, not a computer problem.

Firewire device causing problems when connected to Mini via LaCie ExtHD/Bus

Hello there..
Just bought LaCie 300GB Ext.HD/Bus(Firewire &USB). It was recognized by my Mini no problem. I have used the firewire connection between The HD and the mini. The problems begin when I try to connect my M-Audio firewire audio interface (it's mains powered, by the way) to one of the firewire bus inputs of the LaCie - then every action gets the dreaded spinning beachball and I have to shut down etc. The connection of this device has even prevented the HD being recognized by my system, in the case where I have tried having it already connected and powered up before switching on and connecting the HD to the Mini.
I've tried other things such as PMU reset, to no lasting avail.
This is the same firewire audio interface that has worked fine for months when plugged directly into the Mini, so why should there be a problem when it's connected to the bus port of the HD?
Now, as a temporary solution, I have changed the connection between the Mini and the HD/Bus from Firewire to USB - this means I can now use the FW port on the Mini to connect my audio interface (as before). The problem with this is that I work alot with video as well as audio, and have learned that it's very advisable to use firewire drives when working on video...but there is only one FW input on my Mini, so if the La Cie HD is using that, there is no port for audio interface to go in...that's why I bought this particular HD - more storage on a FW HD which has extra FW bus ports for such things as audio interfaces!
I hope I've explained the problem OK, thank you in advance for any advice.
Jimmy

You don't mention which model you have, but this is from the M-Audio Firewire 410 Manual Troubleshooting section:
The FireWire 410 has been designed to give you high performance and professional quality audio. It has been tested under a wide range
of systems and operating conditions. In the real world, however, there is a nearly infinite number of possible operating scenarios, any of
which could affect your system’s performance. Much like owning an automobile, “your mileage may vary.” This section can not begin to
cover all possible issues you may encounter, however we want to give you some suggestions on common problems you may experience.
One thing to avoid is connecting too many devices. The FireWire bus is a dependable, high-speed, high-bandwidth protocol which is ideally
suited for digital audio. Nonetheless, it’s important to remember that audio and multimedia streaming places considerable demands on
your processor and the FireWire bus. Although it is theoretically possible to chain many multiple FireWire devices in series, doing so may
potentially degrade your audio performance.
I guess this degradation could also affect the Firewire HD. Maybe there is a simple fix, but it sounds like the M-Audio people have been down this road before.

Connecting DV camera via firewire disconnects external firewire drive

All of a sudden this has started happening.
When i connect my video camera via firewire to my external Lacie harddrive, and turn the camera on, the drive I have it connected to goes off line. A window come up saying 'Device Removal'. When I disconnect the camera, the drive comes back online.
I have 4 drives connected inline and it happens to any one of them, whichever I attach the firewire to.
I trashed FCP permissions, but that didn't help. I'm running FCPHD 4.5.
Any ideas?
PowerBook G4 15 Titanium Mac OS X (10.3.9)

Its the canon camera. Firewire and canon cameras apparently don't play in the same sandbox very well. All macs have only one firewire bus. For a macbook pro you can use an express card slot, but the imac's you are kinda stuck. The best course of action is to copy to hard drive and then move it within imovie. I read this in Tom Wolksy's book on FCE. It is weird. I have a Sony HDV and an older imac and i can use one firewire port for importing and go straight to an external firewire drive--no problem. However, in his book on page 56. It states the firewire issue. I know this is an imovie forum, but i can assume its also the same for imovie.

My new MacBook Pro and Imac can't recognize my digital video camera (Canon GL2) via FireWire 800 9 pin to 4 pin cable.

My new MacBook Pro and Imac can't recognize my digital video cameras (Canon GL2 or Sony) via FireWire 800 9 pin to 4 pin cable. I've tried two different cables. Any suggestions? Thanks.

Is your DV camera plugged in to AC power (not batteries only)? When you step down from 9 pins to 4 pins, you lose the "power" pins.

I cannot play music when connect to stereo via 30-pin connector. Help?

Since I first upgraded my iPod Touch 2nd Gen to iOS 4.x, I cannot play music when connect to external speakers via the 30-pin connector. I've tried several different speaker systems, but none work. My iPod freezes after making my song selection and doesn't do anything until after rebooting. Even then, it just goes through the same cycle if I select another song. My iPod is 100% functional until I try to plug it in to an external speaker system.
Keep in mind that it worked up until iOS 3.1.3.

Sounds like iOS 4 broke the compatibility with your accessory, something that sometimes happens with major OS changes. Your only hope is to see if the accessory manufacturer has an update to make it compatible with iOS 4, or downgrade your Touch back to 3.1.3.

FME freezes when connecting Canon HV20 via firewire

Similar Messages

Maybe you are looking for