FMIS on Windows 2003 Enterprise SP2 (will it install?)
Hi all,
Might be a dumb question but a client has Windows 2003 Enterprise SP2 R2 and I was wondering if Flash Media Interactive Server will install and run fine on it?
The requirements on the site say Microsoft® Windows Server® 2003 with Service Pack 2 but no about "Standard" or "Enterprise".
Thanks for your help!
Ryan
JayCharles you mentioned installed FMIS on Windows 2003.
I installed FMIS 3.0 on Windows 2003.
CPU is Sempron 3500, 2gig Mem, 1gig ethernet card.
The streaming videos on VOD play fine internally within local lan.
Duration is over 1hour encoded in .flv format
I published swf's to wwwroot on Windows Server on C:\
the VOD's are in on E:\ in .flv format
DSL speed is up at about
Download Speed: 1741 kbps (217.6 KB/sec transfer rate)
Upload Speed: 434 kbps (54.3 KB/sec transfer rate)
Latency: 57 ms
The question is why the sound/video to outside world is not smooth.
Sample is here http://auffant.selfip.org/flvs/poly1.swf
Any suggestions to improve the quality, Where I am missing the boat?
Thanks
Similar Messages
-
Hi,
Does PM7 work on WIndows 2003 Enterprise SP2?
I have PM7 installed and it starts but when opening a template an error pop's up:
Cannot open file
Error code 8009:-001
I have read some articles on this forum and other websites that PM7 is to old to run on Windows Vista and Windows 7. So I was wondering about Windows 2003.....It's not clear to me if your "No!" refers to the explicit question of the title, or to the implicit one ending the message...
-
CA and Certificate Issue in ACS 4.0 For Windows 2003 Enterprise Server
Hi,
I have configured Microsoft CA server on the same ACS 4.0 for Windows 2003 enterprise server which was configured earlier using the self generated certificates for EAP and PEAP authentications.
After I change the certificate from self generated to the new CA certificate that can be viewed under install ACS certificate option on ACS server but having the following problems
1. SSL is not functioning while internet browser access to the ACS server and going through http instead of https.
2. Wireless clients are authenticated successfully even after the certificate is uninstalled.
Any help on these problems will be appreciated.
Thanks
Best Regards,
AhmedHi Rohit,
Thanks for reminding the HTTPS option under Administration Control on ACS.
I have some doubts pertaining to installation of certificates on Wireless clients though it is optional for Self Generated Certificates but what in case of Mirosoft CA as I tested wireless client authentications even after removing the certificate from microsoft supplicant WindowsXP SP2 having installed the patch KB885453 for PEAP. How the certificate on wireless client works.
Is it mandatory or optional to keep certificate on Wireless Clients as they could able to get authenticated through ACS after removing the certificate.
Thanks
Best Regards,
Ahmed -
Oracle 9i - Unable to set /PAE and /3GB Switch in Windows 2003 Server SP2
Hi
I was wondering if anyone had any experience on Windows 2003 Server (SP2) with setting /PAE and /3GB switches.
I am unable to set both together, setting one or the other works fine in the boot.ini.
Oracle seem to think you can set both but it causes my OS to crash/become unstable.
Has anyone set both switches together on 32 bit Windows 2003 Server successfully?
I am using Oracle 9.2.0.3 Enterprise Edition.
ThanksThe server is new. But we installed 10g before 11g was available. Then upgraded to 11g, so it is a little mess. What the oracle installer should have done in a fresh install, it is maybe not what the server has now.
I have checked for memory issues, processor issues, http errors, every EM setting and metric, and everything looks just right, but the applications are slow and the users are upset.
Anyway, thanks for the advice. Maybe we will need to re-install everything or go back to 10g on Windows 2003 Server x32. That configuration was working fine before rushing into 11g. -
Error launching Infoview on Windows 2003 R2 SP2 64 bits
In our Lab, just installed BO XI 3.1 on a Windows 2003 R2 SP2 32 bits AND a Windows 2003 R2 SP2 64 bits servers.
When launching Infoview on the 64 bits server, I get the following error message:
Server Error in '/InfoViewApp' Application
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this applicationprevent the details of the application error from being viewed.
Details: To enable the details of this specific error message to be viewable on the local server machine, please create <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application....
I did modify the web.config file for the tag: <customErrors mode="RemoteOnly"/>
When accessing Infoview after the change, I get:
Server Error in '/InfoViewApp' Application
Retrieving the COM class factory for component with CLSI {E063B04A-CB8B-460E-99D0-F7D8FA2FAAA2} failed due to the following error: 80040154
Description: An unhandled exception occurred during the execution of the current web request. Pleas review the stack trace....
I don't have any problems accessing Infoview on my 32 bits server. Same installation procedure.
I uninstalled BO on my 64 bits server and reinstalled without solving my problem.
Any ideas or experience with 64 bits envir.?
Thanks for any advice, suggestions. Wondering if I should just be going with 32 bits but we're trying to go with as many 64 bits servers in the field.
RegardsDenis,
You pointed me in the right direction. Found something in the DB knowledge of SAP (with some patience..).
I'm not too sure if it's the article ID but here's what show up next to the title: 1326978
Mainly, here's the solution:
Symptom
How to configure XI 3.1 with Win2003 64-bit using IIS
When navigating to InfoView, user receives "Server Error" message.
Server Error in '/businessobjects/Enterprise115/InfoView' Application. -- displayed for XIR2
Server Error in '/InfoViewApp/ Application. -- displayed for XI 3.x
Reproducing the Issue
Issue could occur in any 32-bit version of XI (XIR2 and XI 3.x) that supports 64 bit windows 2003 operating systems
Cause
While newer versions of XIR2 and XI 3.x are supported on 64 bit OS's they do not currently support 64 bit .net
Resolution
XI 3.1 is a 32-bit application and InfoView/CMC cannot run while IIS is in 64-bit mode. In addition, IIS cannot run in both 32-bit and 64-bit modes simultaneously. Follow these steps to change IIS to run in 32-bit mode and unregister/register the correct IIS app pools.
Open the windows command prompt and do the following:
To disable 64-bit .NET 2.0:
cd C:\windows\microsoft.net\Framework64\v2.0.50727
aspnet_regiis /u
To enable IIS to run in 32-bit mode:
cd C:\Inetpub\AdminScripts
cscript adsutil.vbs SET W3SVC/AppPools/Enable32bitAppOnWin64 1
To enable 32-bit .NET 2.0:
cd \WINDOWS\microsoft.net\Framework\v2.0.50727
aspnet_regiis /i
In IIS manager under Web Service Extensions:
ASP.NET v2.0.50727 (32-bit) (The new one that appeared when you enabled 32-bit .NET 2.0) Set to Allow.
ASP.NET v2.0.50727 (the 64-bit version that has been there since you installed .NET 2.0 framework) If it is still listed, Set to Prohibit.
Restart IIS (via Windows command prompt)
iisreset
I am now able to get to the login screen of InfoView but I'm missing the type of authentication field (Enterprise, Windows AD)
I'll take a look early tomorrow.
Thanks again.
Jay -
Iphone 5 S can't get sync with itunes installed on windows 2003 server SP2
After successfully installed itunes 11.1.5 for windows (i'm using windows 2003 server SP2 32bit). Whenever time I connect my iphone 5S to this computer, it always pops up an error message "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install iTunes again"
After I uninstalled/reinstalled many times I got successful install iTunes software, but this still having problem with this error message. When I open iTunes application and plug my iPhone 5S it always show the above error message & on iTunes application --> Files --> Devices I couldn't see any devices available (i.e Syns option is faded out & not clickable)Hi Tolga,
You face with this error, because of Trex installation package is trying to install native i386 redistributables (vcredist_x86.msi) during the process. In order to patch Trex system on x64 architecture, follow the instructions, below;
1) Start sapinst, under your <TREX_PATCH> path
2) Ignore AMD64 warning popup
3) When popup appears on the "1603:Fatal error during installation." error, change temp folders on both environment variables, on my computer
4) Download and execute "vcredist_x64.exe" then run installer
5) After respective installation click on "Retry" button on error popup
At the end of this operation, your Trex patch will be succeeded. Please do not forget to undo your temp directory settings, on your Trex host. I hope that it is clarify your question.
Best regards,
Orkun Gedik
Senior SAP Development And Basis Consultant -
Bootcamp with Windows 2003 Server SP2
First of all I've got a bootcamp installation of Windows 2003 Server SP2 on my Mac Mini 2Ghz Core Duo, but until now I can't get the following:
- installation of Bootcamp software in Windows
- drivers for video and bluetooth
If some one can give me help on getting the correct software/drivers for this.
Already thanks.
Robbertgo to services window and set all your Oracle services to automatic instead of manual. this will start your database automatically rather you start it manually
Anil Malkai -
Error while Installing R12.1.1 on Windows 2003 Enterprise Edition
Dear All,
I am installing R12.1.1 on Windows 2003 Enterprise Edition Server. I am using the media source that i have downloaded from Oracle Edelivery. I have done a MD5Sum check on the dowloaded files based the MD5SUM Check details given in site. (Not after staging).
I have the stage files in the same partition as the partition in which the OS & Oracle is being installed (Free space is 300GB after staging)
When the Installation reaches 53%, the installation fails with the following Error: "RW-50004: Error code received when running external process. Check log file for details. Running APPL_TOP Install Driver for VIS Instance"
Log File:
=====================
e:\oracle\VIS\inst\apps\VIS_r12\logs\03021433.log
================================
Processing Step 3 of 5
Executing: e:\oracle\VIS\inst\apps\VIS_r12\temp\adrunias.cmd
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Perform the registration for tech stack
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Statusstring Registering Applications Technology Stack
Statusstring Registering Applications Technology Stack
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>(echo APPS & echo APPS ) | D:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -mx512M -classpath .;D:\StageR12\startCD\Disk1\rapidwiz\jlib\java;D:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyAppsTechStack -e e:\oracle\VIS\inst\apps\VIS_r12\appl\admin\VIS_r12.xml -stage D:\StageR12\startCD\Disk1\rapidwiz -showProgress -phase reg -nopromptmsg
Log file located at e:\oracle\VIS\inst\apps\VIS_r12\admin\log\ApplyAppsTechStack_03021625.log
**** truncated *************
- 3% completed
\ 3% completed RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
RC-50013: Fatal: Failed to instantiate driver e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :REG_OK
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Cannot execute registration of Applications Techstack
Cannot execute registration of Applications Techstack
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "" == "TRUE" goto :INSIAS_OK RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running APPL_TOP Install Driver for VIS instance
ApplyAppsTechStack_03021625.log
=========================
Started ApplyAppsTechStack at Wed Mar 02 16:25:21 IST 2011
Version:
ApplyAppsTechStack.java : 120.23
Executing home registration for s_weboh_oh...
Registering using Registration Driver
e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
instantiate file:
source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\adouiweboh.pl
dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\ouicli.pl
setting permissions: 700
instantiate file:
source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\txkstubcfg1013.pl
dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\txkstubcfg1013.pl
setting permissions: 700
instantiate file:
source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\apachectl_sh_1013_oh.tmp
dest : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl
backup : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl to e:\oracle\VIS\inst\apps\VIS_r12\out\apachectl
setting permissions: 700
Executing script in InstantiateFile:
e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I e:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
script returned:
Timed out( 3750000 ): Interrupted Exception
Beginning OUI CLI cloning for s_weboh_ohWed Mar 2 16:25:24 2011
e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre\bin\java.exe -classpath D:\StageR12\startCD\Disk1\rapidwiz\jlib\java;e:\oracle\VIS\apps\tech_st\10.1.3\oui\jlib\OraInstaller.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e e:\oracle\VIS\inst\apps\VIS_r12\appl\admin\VIS_r12.xml -nolink -oaVar s_weboh_oh -homestub weboh -log e:\oracle\VIS\inst\apps\VIS_r12\admin\log\ohclone.log
running OUI CLI home cloning:
e:\oracle\VIS\apps\tech_st\10.1.3\oui\bin\setup.exe -nowait -clone -silent -force -nolink -waitForCompletion session:ORACLE_HOME=e:\oracle\VIS\apps\tech_st\10.1.3 oracle.as.j2ee.top:s_asInstanceName=VIS_r12_WEBOH oracle.as.j2ee.top:s_adminName=oc4jadmin oracle.as.j2ee.top:s_adminPassword=welcome ORACLE_HOME_NAME=VIS_r12_WEBOH -J-Doracle.installer.noLink=true
Executing script in InstantiateFile:
e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I e:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
script returned:
.end std out.
.end err out.
instantiate file:
source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\adouiweboh.pl
dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\ouicli0.pl
setting permissions: 700
instantiate file:
source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\txkstubcfg1013.pl
dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\txkstubcfg10130.pl
setting permissions: 700
instantiate file:
source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\apachectl_sh_1013_oh.tmp
dest : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl
backup : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl to e:\oracle\VIS\inst\apps\VIS_r12\out\apachectl0
setting permissions: 700
e:\oracle\VIS\inst\apps\VIS_r12\admin\log\adcvmlog.xml does not exist. Ignore it
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I e:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone
ouicli.pl INSTE8_APPLY -1
AutoConfig is exiting with status 1
RC-50013: Fatal: Instantiate driver did not complete successfully.
e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
I have gone through the meta link document [989752.1]. But I feel that document does not apply to me as i am not running the installation from a network storage area.
Pl. help me.
Thanks and regards,
Adm.AN Update:
The Oracle Universal Installer shows the following in the screen before the error appears:
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks w
ill be executed.
Preparing to launch Oracle Universal Installer from D:\DOCUME~1\ADMINI~1\LOCALS
~1\Temp\OraInstall2011-03-02_04-25-26PM. Please wait ... Oracle Universal Instal
ler, Version 10.1.0.6.0 Production
Copyright (C) 1999, 2007, Oracle. All rights reserved.
...............................................................Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
Val: 0
Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
path: D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2011-03-02_04-25-26PM\jre\bin
;.;D:\WINDOWS\system32;D:\WINDOWS;D:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;D:
\MVS\VC\bin;D:\cygwin\bin;D:\WINDOWS\system32;D:\WINDOWS;D:\WINDOWS\System32\Wbe
m
toload is D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2011-03-02_04-25-26PM\Win
dowsGPortQueries.dll
100% Done.
Copying files in progress (Wed Mar 02 16:25:59 IST 2011)
.................................................Val: 0
. 79% Done.
Copy successful
Setup in progress (Wed Mar 02 16:26:05 IST 2011)
.....Oracle JAAS [Wed Mar 02 16:26:28 IST 2011]: exception: 9
opmnctl: opmn started
Please help me.
Thanks and regards,
Adm -
Hi Guys,
I'm experiencing a problem with CoCreateInstance, where it returns error 0x8007007e.
The code is something like this:
HRESULT hRes = S_OK;
CComPtr<IMyInterface> spObj;
if(FAILED(CoInitialize(NULL))) { /* quit */ }while(FAILED(hRes = spObj.CoCreateInstance(CLDIS_MyClass, NULL, CLSCTX_LOCAL_SERVER)))
// LogFailure(hRes);
Sleep(10);
The problems occurs only on a single machine having Windows 2008 Enterprise SP2 installed (it works fine on other machines / OS versions). It happens only during the system startup (this is a Windows Service) and only for the first call of the CoCreateInstance.
The second call always succeeds.
The problem does not occurr when starting the service manually from Services.
I did some investigation using Process Monitor and found that the HKCR\CLSID\[CLSID of MyClass]\LocalServer32!LocalServer32 registry value is accessed before the failure. The registry value exists - it is added by the Windows Installer during
installation.
If I remove the registry value then the CoCreateInstance always succeeds.
I've been trying to lookup for some documentation on HKCR\CLSID\...\LocalServer32!LocalServer32 but haven't found anything useful other than it's a "Windows Installer Entrypoint". I assume that the Windows Installer does some integrity checks when
calling CoCreateInstance for such class and this fails for some reason but currently I fail to find the reason.
Can anyone help finding out what's the root cause of the 0x8007007e error here, please? Any help or tip is much appreciated.
Many thanks!
Marcin.Hi Marcin,
This forum is mainly for talk about the product use related issue and not the best place to talk about the develop issue, for the develop issue we can post in MSDN forum for
the further help and your issue may need capture a dump then for the further analysis it is not an efficient way to work in this community since we may need more resources which is not appropriate to handle in the community. I‘d like to suggest that you submit
a service request to MS Professional tech support service so that a dedicated Support Professional can further assist with this request.
MSDN forum
https://social.msdn.microsoft.com/Forums/en-US/home
Please visit the below link to see the various paid support options that are available to better meet your needs.
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Thanks for your understanding and support.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Using Windows 2003 enterprise edition?
Hi,
I am about to install a SAP j2ee instance in windows 2003.
I was under the impression that only Windows 2003 enterprise edition was supported/recommended for SAP productive instances. Enterprise version is costly compared to standard version.
Now, it looks like standard edition is acceptable itf you can handle memory limits (4GB for 32-bit and 32GB for 64-bit).
Can someone confirm my assumption?
thanks.Hi Eric. From instguide you can use this servers for 64 bit (example for Central System) :
Windows Server 2003 :
Windows Server 2003 Standard Edition
Windows Server 2003 Enterprise Edition
Windows Server 2003 Datacenter Edition
For any version of Windows Server, you need the
latest supported service pack.
A suitable Windows Resource Kit is strongly
recommended.
You can't use 32 bit for Production system, in any case for release NW SR3 -->
you can't even install on 32 bit platform.
P.S. for HA for example you can't use Standart Edition ...
P.P.S for example read this
Re: SAP's compatibility with Windows Server 2003
latest answer are from SAP member.
Regards.
Edited by: Sergo Beradze on Nov 12, 2008 10:54 PM -
Admin Console errors in fresh install on Windows 2003 Enterprise.
I have attempted to install 6.1 SP4 on two different Windows 2003 Enterprise boxes. Neither has W2K3 SP1 on them. The installs proceed using a typical install with no errors reported. All defaults were accepted during the install. I can start the server for the Admin and web server instances. I can hit the default page on the web server instance. When I attempt to launch the admin console, I am prompted to logon, as expected. I enter my credentials and promptly get an HTTP 500 error. I check the logs in C:\Sun\WebServer6.1\https-admserv\logs\errors and find the following line:
[26/Apr/2005:12:43:26] failure ( 2596): for host 192.168.175.128 trying to GET /https-admserv/bin/index, cgi_scan_headers reports: HTTP4044: the CGI program C:\Sun\WebServer6.1\bin\https\admin\bin\index.exe did not produce a valid header (program terminated without a valid CGI header. Check for core dump or other abnormal termination)
I searched for others reporting similar problems and the closest I could come to an answer was to make sure cookies were enabled on the brower (they are). I get the same error in IE and Firefox, both locally and remotely. After becoming frustrated with one W2K3 server, I decided to try on another. Exactly the same errors.
Increased loglevels in the server.xml provide no additional logging for this problem. Any pointers to a resolution would be most appreciated as I'm about ready to scrap Sun and move to Apache.
Thanks,
SeanYes, there appear to be problems where certain old versions of Netscape and iPlanet products can leave old DLLs lingering in the Windows system32 directory.
I'd check for the following files in the Windows system32 directory (typically C:\WINNT\system32 or C\WINDOWS\system32):
libnspr4.dll
libplc4.dll
libplds4.dll
nss3.dll
nssckbi.dll
smime3.dll
ssl3.dll
nsldap32v50.dll
nsldappr32v50.dll
nsldapssl32v50.dll
If you find any of these files, you can try replacing them with a copy from your Web Server install. Don't forget to backup first.
Please report back what you find! -
Restore 2003 std system state backup on windows 2003 Enterprise
Hi
I have taken windows 2003 std SP2 full backup (systsem state, C drive, and Data drive) few days back. My question is, can i restore this backup on windows 2003 Ent SP2 version?.
Regards,
Suhag.Hi Suhag,
please check this link: http://support.microsoft.com/kb/249694#method4
It is well explained there. The preferred method to use in order to restore Windows 2003 backup is by using ASR.
However, I think you can backup/restore only the same version of the OS:
"Operating system version
The source and destination computers must use identical operating system versions and identical Windows stock-keeping units (SKUs). For example, you can't back up Windows 2000 Server and then restore it on a computer that is running Windows 2000 Advanced
Server. Also, the source and destination computers should both use retail versions of Windows or the same OEM version of Windows. The best practice is to install Windows on the destination computer by using the same installation media that you used to install
Windows on the source computer."
Also, servers also have to have the same HAL (hardware Abstraction layer) which basically means the same hardware (CPU, MBU and so on).
Hope this helps.
Regards,
Vladimir -
IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit
Dear all,
we are just trying to install IDES 4.7:
IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit
But the installation break with error Message:
Error 5 (Access is denied.) in excution of a "NetServerGetInfo" function, line (233), with parameter (saptranshost, 101).
MOS-01224 Failed to add privileges "NetcbPrivilege SeAssignPrimaryTokenPrivile SeIncreaseQuotaPrivilege to account ....." ....
FJs-00012 Error when excuting script....
Any experience or help from your side?
Thanks in advance
HanseAtikHi. First login in your server with user "sid"adm after go to START --> RUN --> CMD
adn execute "R3trans -d" Tell what result .
About documentation read -->
service.sap.com/~form/sapnet?_SHORTKEY=00200797470000065912&
in left corner chek your release like :
"SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00 (SR1)"
After read the document for your release, for example if you use the Oracle on WIn and R/3 Enterprise 4.7 x 2.00 SR1 -->
Inst. Guide - R/3 Enterprise 4.7 x 2.00 SR1 on Win: Oracle
Regards.
Edited by: Sergo Beradze on Mar 21, 2008 10:55 AM -
Cannot install jwsdp-1.2 on Windows 2003 Enterprise Server
Hello,
We are trying to install jwsdp-1_2-windows-i586.exe on a Windows 2003 Enterprise Server system, but unfortunately we are not able to do this.
Even worse the installation program simply stops without any message at all. So we have no clue how to proceed. Any help would be appreciated.
Greetings,
Erwin.Yes,
I have attached the output, but the installation just stops..
Greetings,
Erwin.
D:\install>jwsdp-1_2-windows-i586.exe -console
Initializing InstallShield Wizard...
Searching for Java(tm) Virtual Machine...
Searching for Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Searching for Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Searching for Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Searching for Java 1.4X by Sun Microsystems
Verifying Java 1.4X by Sun Microsystems
D:\install> -
EP 6.0 on Oracle 9i 32 bit for Windows 2003 server x86_64 bit env Install
We are facing issues while performing instalations of EPortal 6.0 on Windows 2003 enterprise edition server(X64 version) on AMD 64 bit processor.We have installed 32 bit Oracle software alongwith 32 bit SAP kernel 640 dumps
We had to install oracle 9.2.0.5 32 bit ,since there is no oracle
realease for oracle 9i 64 bit ,on OS windows 2003 server X_86 64 bit,after doing this when we go ahead kenel 32 bit, we faced error during database creation phase of the NW java installation.The error logs are
as follows,
ERROR 2008-04-05 23:09:27
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message:
ORA-12546: TNS:permission denied
plz respond asaphi sm,
this seems to be an issue with the rights of the user and the DB install. check is the TNS is up and running and that the SIDADM has fill access to it. Also , have you checked the latest PAM. why are you trying to implement EP6 right now? I would suggest to go for EP7.0
regards,
Shantanu
Maybe you are looking for
-
Generated RoboHelp Packager for Adobe Air Errors
Generated RH 8 to AIR 2 help yesterday and it is working. Now I want to package the AIR file for deployment using the RoboHelp Packager for Adobe AIR utility. My Finish Dialog box displays" The Adobe AIR package was not generated". The 1st grouping o
-
Is any extra isolation required when using Analog output to dirve higer power circuitry?
I want to connect the analog output of a DAQcard-1200 to a current amplifier to give 5A and a tranformer to give approx 200V, is any extra isolation required to protect the card?
-
Nvidia + Svideo TVout on old CRT TV
I ve been using arch linux for years for creating small servers with no gui with old machines. Now I want to use a spare quite fast laptop I have for emulating MAME and other older systems that where meant to be played on a CRT screen. Since SVIDEO T
-
How to color correct a portion of a photo?
I am new to photoshop. I have version cs5. I have several photos that were taken through a Blue tinted plexiglass window. Some or all of the photo has acquired the tint. Also parts may have a reflection minor of people standing around. How do I remov
-
I restore my iphone 2g but there's an error occured (2003) how can I restore my iphone
I restore my iphone but there's an error occurred (2003) how can I restore it