FMLE and video capture devices

Hi, I have a streaming application that captures camera video
devices and streams using FMS 3.5. Today, I was playing around with
FMLE and it captured the TV cards I have in my computer. I tried my
video object in my Flex app to capture the same TV card that FMLE
captured, but to no avail. Does any one know why the stream from my
TV card is available to FMLE and not to my Flex app video object?
Thanks

"Mainmanian" <[email protected]> wrote in
message
news:gnthjl$5qs$[email protected]..
> Hi, I have a Flex streaming application that captures
camera video devices
> and
> streams using FMS 3.5. Today, I was playing around with
FMLE and it
> captured
> the TV card I have in my computer. I tried my video
object in my Flex app
> to
> capture the same TV card that FMLE captured, but to no
avail. Does any one
> know
> why the stream from my TV card is available to FMLE and
not to my Flex
> app? I
> tried the getCamera and I pointed to the TV device, but
it did not get the
> stream. I appreciate if anyone has an insight into this.
Thanks
Probably FMLE (whatever that is) has acess to the system in
ways that Flex
doesn't.

Similar Messages

FMLE 3.0.0.4743 Problem with video capture device

log:
Tue May 05 2009 14:26:54 : Selected video input device: Beholder A/V Capture (SAA7135) [Slot 2]
Tue May 05 2009 14:26:54 : Selected audio input device: Beholder Aud Capture (SAA7135)
Tue May 05 2009 14:26:55 : Problem with video capture device. Please verify that the video capture device is working correctly and is not already in use.
Tue May 05 2009 14:26:56 : Audio Device Error : The selected audio device "Beholder Aud Capture (SAA7135)" doesn't allow setting volume intensity. Disabling the volume slider control.
Flash Media Encoder 2.5 working without any errors

The second message that you are getting "The selected audio device "Beholder Aud Capture (SAA7135)" doesn't allow setting volume intensity. Disabling the volume slider control." is because your device does not let you change intensity of volume. This warning message is just to tell user that volume slider will remain disabled for the selecetd device. This is new addition in FMLE 3.0 and was not there in FMLE 2.5
Also for first message, please make sure that no other instance of FMLE is already running using this device. You can verify this from task manager. If any other instance of FMLE is running then please close that instance so that device gets free for new instance.

Opinions on low cost USB video capture devices for FMLE?

I have already tried a few such devices. I would at least like to achieve reasonable SD at 720 X 480. HD would be a plus, but not necessary. My camera has HDMI, SDI, and Component and composit out. I have already tried a couple of capture devices, and the results were as follows.
SIIG USB 2.0 Video Capture Device - JU-AV0012-S1
Pretty clear as to why this was so cheap. It claims full NTSC support, but that is only on the input. Output is 320 X 240 only.
DIAMOND USB 2.0 HD Game Console Video Capture Device GC500 USB 2.0 Interface
Again, this unit claims "HD" but that is only on the input. Output is 640 x 480. The image quality was terrible with the supplied software, or with Adobe FMLE. Noisy, and well below full NTSC quality. Even when fed with the component out of a Sony NX5. Unacceptable. Even for the bargain price at Frys.
Hauppauge HD PVR 2 Gaming Edition
Seems I bought a dud. I went back and forth with Hauppauge support, and never could get this to be detected by FMLE, or the included software. On doing a search online for the error message I received, I discovered many similar trouble reports on various forums. I bought this one at a discounted price. Perhaps this is the reason why.
The notebook I have is a Windows unit, with no expresscard slot, or 1394 input (unfortunately). I did look briefly at the Blackmagic Intesity Shuttle, but it needs USB 3.0.
Curious to hear of any sucess with USB capture and FMLE, and with a device under (hopefully well under?)$200.

I've been streaming with the ION Video2PC capture device...it works flawlessly with no problem. The machine I've been testing it on can only pump out 480p or 540p at the most. But, I'm sure if I used it on a faster machine I would get way better results. You can find them used under $30 bucks online and unlike most cheap capture/input devices, you can access the video and audio in FMLE. Just thought, I'd share they info.

Video capture devices and Flex

Hi, I have a Flex streaming application that captures camera
video devices and streams using FMS 3.5. Today, I was playing
around with FMLE and it captured the TV card I have in my computer.
I tried my video object in my Flex app to capture the same TV card
that FMLE captured, but to no avail. Does any one know why the
stream from my TV card is available to FMLE and not to my Flex app?
I tried the getCamera and I pointed to the TV device, but it did
not get the stream. I appreciate if anyone has an insight into
this. Thanks

"Mainmanian" <[email protected]> wrote in
message
news:gnthjl$5qs$[email protected]..
> Hi, I have a Flex streaming application that captures
camera video devices
> and
> streams using FMS 3.5. Today, I was playing around with
FMLE and it
> captured
> the TV card I have in my computer. I tried my video
object in my Flex app
> to
> capture the same TV card that FMLE captured, but to no
avail. Does any one
> know
> why the stream from my TV card is available to FMLE and
not to my Flex
> app? I
> tried the getCamera and I pointed to the TV device, but
it did not get the
> stream. I appreciate if anyone has an insight into this.
Thanks
Probably FMLE (whatever that is) has acess to the system in
ways that Flex
doesn't.

I need a video capture device for downloading Band and family video tapes.

Hi, I need to download some old video tapes before they turn to dust. Are there any fairly inexpensive video capture devices that work well with the Imac?
Thanks

Are they VHS video cassettes or something like 8MM camcorder tapes?
If they're camcorder tapes, usually it's best to try to buy an old video camera (MUST have FIREWIRE port).
Then you can play the tape in the camera and capture from the Firewire. Also important, if you have a 2010 (maybe 2009?) or newer iMac, you'll need a cable that is Firewire 400 to fit the camera at one end and Firewire 800 at the other end to connect to the iMac.

Problem with video capture device, with a virtual camera

I try to use Adobe Flash Media Live Encoder 3 with a virtual camera(DirectShow Filter) but met such a problem:
"Error connecting input preview RGB filter."
"Failed with error 80004005:SetupInputVideoPreview(pFilter, pguidCategory)"
"Failed with error ffffff97:SetupVideoPreview(pFilterSource)"
"Problem with video capture device. Please verify that the video capture device is working correctly and is not already in use."
However, it is good to use AMCap,
what's the problem with FMLE.
Looking forward to your replies. Thx!

Did you ever figure out the problem/solution?
I am experiencing the same thing with my virtual camera filter when connecting to FME?
Shawn

Detecting Video Capture Devices without Installing JMF

Hi All,
I want to detect the video capture devices, without installing the JMF.
I had included the jmf (windows version) in lib path in netbeans ide. I am able to detect the audio capture device. But unable to detect the video capture devices. But if I install the JMF, I am able to detect the Video Capture devices in My system. Can anyone help me?
Thanks,
Vinoth Kumar.

YES! Please take a look at SIP Communicator project. They have all what u want.
The main idea is copy all .dll files to System or System32 (Please check files which JMF will copy to ur computer and where).
U need to have jmf.jar and sound.jar too ( maybe more) in your computer.
Your program should have DirectSoundAuto.java, JavaSoundAuto.java, JavaSoundDetector.java, JMFInit.java. Those files are in JMStudio source code. They are used to detect all capture devices and register it to JMF, but wait !!! where they will be saved? In order to save information about capture devices which are detected, you should create "jmf.properties" file in the same location with jmf.jar.Therefore, u should modify the JMFInit.java so it can check if the "jmf.properties" exists. If it's not, you have to create it.
Check SIP Communicator at Folder "media" then "device". They have modified those files I mentioned above and created some new files to SC can detect more devices.
Edited by: tamngminh on Sep 16, 2008 9:50 AM

How to connect a video capture device to Satellite M30X 127

I'm going around in circles trying to find a video capture device that will function with a laptop and would be grateful for advice. By way of example, I'm now looking at the 'Canopus ADVC-110', although still looking around (but not Pinnacle, who seem to have a terrible reputation for capture items).
Problems include:
1. Main problem is - many video capture external devices require a 'line-in' to PC for good quality audio transfer. This laptop doesn't have a line in, only the mike and headphone jacks. In addition, I've also tried a few RCA pins in the 3.5mm microphone/headphones jack and they were too small. How to solve the problem of getting audio from vcr to my PC?
2. The ADVC-110 connects to the PC via Firewire (and S-video), but is a SIX-pin type. M30X is a FOUR-pin type. Are there adapters available?
3. Some capture programmes seem to require huge capacity of RAM. Is a laptop going to be suitable to do the job? (I simply want to capture old vhs tapes from vcr to PC, then burn to DVD with Nero 7 or similar).
Thanks in advance!

Hello
You are right! You must use external device for signal transfer to your notebook. I dont know where you have this info but I have good experiences with Pinnacle product. For data transfer I have used USB port.
'Canopus ADVC-110 is not known to me but I dont see any reason why this should not work well. Use delivered software for video capturing and there should not be any problem.
Only thing is that after recording the whole video material must be prepared for burning and unit need a lot of power to do this well und fast. When you buy this and want to use on right way I recommend you to expand RAM to 1GB.
Compatible memory modules for your Satellite M30x are:
PC2700 512MB (PA3312U-1M51)
PC2700 1024MB (PA3313U-1M1G)
Bye

Advice Needed for Video Capture Device

Hi,
I'm looking to buy a USB (or Firewire if they exist) video capture device that can take S-Video and composite connections. Could someone recommend me best one under $150 that is compatible with Snow Leopard? Also, and more importantly, does anyone know if it is possible to capture the signal via Quicktime Pro or Final Cut Pro rather than bundled third party software.
Thanks!

I used the predecessor to the Canopus ADVC55 to load VHS tapes into a mac. As I recall I brought the firewire signal into iMovie (could have been Final Cut Pro too, as I had both on the system). Here are the specs: http://www.grassvalley.com/products/advc55 . Also some comments on it at http://www.amazon.com/Hardware-ADVC-55-d-Converter-Ntsc/dp/B000HGVZG0/ref=sr_1_2 ?ie=UTF8&qid=1323954590&sr=8-2 Here's another source to buy it: http://www.bhphotovideo.com/c/product/312315-REG/Grass_Valley_602005_ADVC_55_Ana log_to_Digital.html .
They also make an ADVCmini, which I haven't used, which is probably less expensive, with specs at http://www.grassvalley.com/products/advcmini

Adobe premiere elements 12 with diamond vc500 one touch video capture device.

Adobe premiere elements 12 and using Diamond vc500 one touch video capture device.
AVI files will not load into Adobe premiere elements 12.
I bought what I thought were the two best software and capture devices.
I am archiving old VHS tapes and using Diamond vc500 capture software called EZ grabber. I thought the best archiving format would be AVI files. As I just started this project. I am willing to do what is needed.
That even being, going and buy another capture device that being for a VCR to PC using a USB are even a Video card.
EZ grabber software ask you to record in what format. I picked AVI. There is DVD - SVCD - VCD - MPG4. I want to archive then go back and edit. The DVD or SVCD format, is that not the same as mpeg 2?
You and I know the drill. Saving in what long term archive format and that dare thing about video compression and losing quality of the videos. Its all a nightmare.
Once again I am willing to buy another capture device for a VCR that will work with Adobe premiere elements 12.
Help please with long term archiving format and capture device.
Thanks

The answer is B.
Capturing the VHS content to computer (via the Diamond vc500 and USB connection and EZ grabber) to obtain an .avi file on your computer and then trying to import that into Premiere Elements with its Add Media/Files and Folders?
When I do that, the Adobe premiere elements 12 crashes or only loads a 2 mins of video.
The firewire connection device "Canopus" product sounds great. But I really don't want to spend that much on my home videos. My PC does not have a Firewire connection. So add a new card for that and the Canopus product. I could just pay someone to do my VHS tapes.
Diamond vc500 $35
Adobe premiere elements 12 $65
Firewire card $50 plus
Canopus $180
$330 is way too much for simple home VHS videos

Can't get driver to work with ezcap usb 2.0 video capture device on windows 8.1

I have an ezcap video capture device that works fine on my windows 7 machine but will not work in windows 8.1. The software (arcsoft 3.5) functions properly but will not let me select the video grabber as a source. The driver itself indicates not compatible with 8.1 and the there are no drivers out there that I can find to address this issue? Any known solution would be helpful.

Hi,
It is not from HP. Please try driver from the following link:
http://www.ezcap.tv/ezcap116-drivers?zenid=r53fvgj1n510tdme9itqc9ql52
(After the first screen shot).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not

After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not on DVD player. Tech support for the VCD said my HP DVD burning software has to burn "DVD Video and not DVD data" and to check with HP. How can i check myself.

Grahamster, welcome to the forum.
I recommend trying CDBurnerXP for burning video CD's. I have been using it for years without a glitch. I use it mainly for burning ISO's, but have used it for all types. Please let us know if it works or not.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Why i can not open Video Capture Device Settings in Adobe Flash Media Live Encoder?

Hi! I've got a problem with Adobe Flash Media Live Encoder 3.2. Why i can not open Video Capture Device Settings? I'm clicking this button, but it doesn't appear, there is just a blinking of the camera's window. Please help me, i'm looking like a shining red pig! Need to change the light or contrast.

"The audio preview in FMLE indicates there IS audio being input"
How do you know this?
are you "Saving to file"? how is the audio in the saved file?
Adninjastrator

Video capturing devices !

Hi every body !
Can any body please give me the list of all online video streaming JMF compatable video capturing devices!
any response will be highy appreciated.
please try to be specific to the company and model because i am going to buy one!
Thank you !

This might help. Scroll down to the bottom of this page:
http://java.sun.com/products/java-media/jmf/2.1.1/formats.html
Regards,
Paul

Video Capture Device

I have a cheapo Capit usb video capture device. It works fine in my Win 7 T61 with only 4gb RAM and a 2.0gh C2D. When I try to use it in the T400, it's not so good. The monitor frame is scrambled when I go to record and the audio and caption is way off. What did I do? These are both set up nearly identically.
T400,, 2.53ghz T9500,8gb ram Windows 7 Home Premium
T61,15.4 T7300, 2gb RAM, Windows 7 Home Premium
14.1 T23, type 2647 9LU, 1.13 PIII, 1gb, XP Pro

Yea I actually have a sony that has analog to digital passthrough. However, i've been using it as a webcam recently and i'm almost convinced that that has something to do with the fact that i've had to send it for repairs recently. I think that having it on for long periods of time without having a tape in it or using it for recording poses a potential risk for head damage. So im a little wary about using it as a bridge to capture hours of analog footage to my computer. So would you know of any other peripherals designed specifically for capturing analog sources on an imac?

FMLE and video capture devices

Similar Messages

Maybe you are looking for