FMLE is not recognizing my camera.

I'm using a Sony HDR-CX160 with an iGrabber connected via USB. FMLE is not recognizing the camera. Any suggestions?

It's not that FMLE is not recognizing your camera.... FMLE is not recognizing your capture device (the iGrabber).
Just because a capture device can capture video as a file onto your computer doesn't mean that the device is made to deliver throughput video as a "live camera" source. There is a big difference between recording to a file, and passing video through as a source.
An inexpensive caputre device that FMLE can see is the Dazzle Video Creator Platinum HD. If you have a FireWire connection on your computer I would strongly suggest using the Canopus ADVC110 capture device (works like a champ -- no issues or errors).
If you change your capture device out to one that allows other software (like FMLE, XSplit, Wirecast, etc.) to see the video as a "source" then you'll be in luck. iGrabber simply does not have that capability. This isn't the fault of Adobe, it simply wasn't designed by iGrabber to be used in this manner.

Similar Messages

Onlocation is not recognizing my camera

I have a Panasonic HPX300 and im shooting on dvcprohd connected via firewire, and when i turn OL on it reads "no video input found. connect a camera to your computer, or check your cameras connection and power" I have my camera on PC Mode. any help would be appreciated.
thanks
Sean

It's not that FMLE is not recognizing your camera.... FMLE is not recognizing your capture device (the iGrabber).
Just because a capture device can capture video as a file onto your computer doesn't mean that the device is made to deliver throughput video as a "live camera" source. There is a big difference between recording to a file, and passing video through as a source.
An inexpensive caputre device that FMLE can see is the Dazzle Video Creator Platinum HD. If you have a FireWire connection on your computer I would strongly suggest using the Canopus ADVC110 capture device (works like a champ -- no issues or errors).
If you change your capture device out to one that allows other software (like FMLE, XSplit, Wirecast, etc.) to see the video as a "source" then you'll be in luck. iGrabber simply does not have that capability. This isn't the fault of Adobe, it simply wasn't designed by iGrabber to be used in this manner.

FMLE is not recognizing camera in osx

I have OSX 10.9.3
FMLE 3.2
Flash Player 14.0.0.125
As of friday i was testing live streaming using FMLE and my internal camera on my MacBook. Today I have been trying everything i can think of for 3 hours and FMLE will not find my camera. I am at my wits end. Any suggestions?

I am sure this is a know issue and it appears to be without a fix. Each one of my MacPros with a FaceTime HD camera will not show up in FMLE 3.2 - Interestingly, the same issue applies with QuickTime Broadcast from Apple.
WireCast 5 on the other hand picks up the camera with no issues. It would seem that the only answer here is to wait for FMLE 3.3 or buy an external USB Camera. That does seem such a shame though.

No luck importing from SonyHandycam DCR-DVD650? I am using USB import to my MacBook that is running OSX 10.6.8. The MacBook is not recognizing the camera. Any ideas what the issue could be?

I am not having any success in importing my videos from Sony Handycam DCR-DVD 650 to my mac book. I am using the USB connection. The macbook is not recognizing the camera. The macbook is running OSX 10.6.8. Any ideas on what the problem could be?

http://support.apple.com/kb/HT2361 There's a recommendation that when using this camera to record in the 'Standard' format instead of VR format. So if you know what the setting was you used to record the disk that's a starting point.
According to this website the camera should be compatible with iMovie '11
http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
So here's some steps to take to get the Mac to recognize your camera.
1. Try it more than a few times, sometimes it can take 2-4 attempts to get iMovie to recognize a camera for the first time.
2. Always get the power adapter for your camera out of the bag. Hook it to the wall outlet, then plug your camera into that. Don't run it off the battery.
3. With the camera plugged into the wall, in DV playback mode. Hit play and just let it play video out continuously, then reboot the Mac. As soon as you see the desktop, launch iMovie. Go to File Menu > Import from Camera and see if the Capture window opens with your video playing through.
4. Make sure iPhoto doesn't try to launch itself automatically when it detects your camera has been connected to the Mac. Sometimes it tries to steal the videos off of a camera and 'blocks' iMovie from seeing the camera when it's attached. So make sure iPhoto hasn't interecepted your camera and is not running at all when you launch iMovie
No guarantees, but some things to try

GOES Utility not recognizing 60D camera

Does anyone have any idea why the EOS Utility is not recognizing the camera when connected to PC. All functionality are greyed out.

Hello E092176,
We are glad to assist you with downloading images from your camera to the computer using EOS Utility. Windows XP is used as an example, but the procedures are mostly the same if you use Windows Vista,or Mac OS X.
Connect the camera to the computer with the USB cable supplied with the camera.
- Set the camera's Auto Power Off settings to [Off] before making the connection.
- Please see the related information for how to connect a camera to a computer.
Set the camera's power switch to <ON>.
EOS Utility starts automatically.
- If EOS Utility does not start automatically, click the [Start] button, then select [All Programs] , [Canon Utilities] , [EOS Utility] and then [EOS Utility].
- If you use Mac OS X, click the [EOS Utility] icon registered in the Dock. When the [Welcome to iPhoto!] dialog box appears, click the [Decide Later] button. If the iPhoto starts at this time, quit iPhoto.
- If a screen for selecting the program (application) appears, select [Canon EOS Utility] and then click [OK].
[start the operation for downloading images.]
- To download all images saved in the memory card, click [Starts to download images] in the EOS Utility window.
- By default, the downloaded images are sorted into folders by their shooting date, and are saved in the [My Pictures] folder on the computer. If you wish to change the destination for the downloaded images, click [Preferences] and specify the settings in the dialog box.
- If you click [Lets you select and download images], the images saved in the memory card will be displayed in the EOS Utility window so that you can select the images to be downloaded. For the details, please see the "Downloading selected images" section below.
The images are downloaded to the computer.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

FMLE not recognizing external camera

I have the following configuration:
Mac Book Pro
FMLE Version 3.2
External Camera Source - Sony PMW-EX1 connected via i-Link (Firewire/HDV)
Camera shows up in Firewire Devise List
FMLE defaluts to iSight Camera Source
External camera is not an option in Video Device Dropdown.
Need to solve for live event Friday morning.
Thanks
Rod

if there was just a way to enter an rtsp url into the audio device dropdown menu? any suggestions on how to resolve this? happy to provide more information too if needed...

FMLE does not see my camera

I'm using Firewire 800 port to attach a Canon Vixia HV30 camera on a MacBook Pro using FMLE 3.1. I've turned the camera on before launching FMLE, turned FMLE on before starting the camera, and checked the profiler to make sure the camera is recognized (it is).
FMLE doesn't give me any option other than the iSight. If I remember right, last time I did a live stream, FMLE saw the camera with no problem but now it is not working.
How do I get FMLE to see my external camera?
Thanks.
Jason

1. Connect the camera to MAC using firewire.
2. Switch on the camera
3. Set the camera to DV mode (HDV will not work)
4. Launch FMLE. You should see the camera in FMLE.
Get back to me if above steps don't work.

Mac is not recognizing my camera AGAIN

Can someone, PLEASE, give me an answer?
Image Capture, iPhoto and Aperture stopped recognizing my camera. The camera blinks while connected as always, I can see it in the System Profiler. In About This Mac, under the USB section, I can see that Canon Digital Camera is showing.
The curious thing is that when I turn off my camera, then quickly turn in on I can see it flashing in Image Capture for like 1 second and then "no camera connected" appears again.
What could cause this problem? I once had the same problem, formatting my camera solved it, but this time I tried it a few times and it didn't work.

"when I turn off my camera, then quickly turn in on I can see it flashing in Image
Capture for like 1 second and then "no camera connected" appears"
Once ejected, a disk/camera has to be replugged in.
But this doesn't seem to be the problem. When connected properly
the cam is showing up in Finder and ATMac. I believe the three
apps aren't seeing your pics because possibly the correct camera
storage setting may not be selected in the Finder - although device
itself is connected and present. When my camera connects to the
Mac I always need to select one of several options - I select DCIM
and that turns out to be my pics. Good luck.

Iphoto and image capture not recognizing kodak camera

Hello!
I am having trouble uploading photos from my Kodak easyshare dx4530 to iphoto 6.0.5. This is a new thing as I have uploaded many times before. The camera is not recognized by iphoto or by image capture when the usb is connected. The camera and usb work fine when connected to my husband's ibook G4.
I tried moving the preferences to the trash (com.apple.iphoto.plist and com.apple.imagecaptureapp.plist) and this did not work. There is only 1 account on the computer and it is the admin account.
Thanks in advance for any help offered.

pb35:
Welcome to the Apple Discussions. Is the camera recognized by System Profiler? Did you run any updates before this problem began? A first cut would be a reinstall of the 10.4.9 COMBO updater followed by a permissions repair.
I'd create a second, non-admin, very vanilla account and see if the camera is recognized there by iPhoto or IC. A second plain account is a very good troubleshooting tool to see if the problem is with what's been added to the primary account.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

IPhone 3GS not recognized as camera on Windows XP

I connect my iPhone 3GS to my laptop to sync and it is not recognized as a digital camera and cannot download my photos to back up. Rebuilt my laptop in the mean time and it recognized the camera on the phone, but when downloading the photos, it crashes half way through. Any ideas?

Here it is
Importing personal pics and videos from an iOS device to a computer

Live media encoder not recognizing my camera

I am working on a MacBook Pro with a Sony PMW-EX3 HD camera connected through iLink with a Firewire 800. My iMovie recognizes the camera, so I know it is not the computer. However, in Live Media Encoder 3,1, I am not allowed to choose my Sony camera for input. It is like Live Media Encoder does not recognize the camera.
Any ideas?

I'm sure you checked this but just in case...
Is the camera on or in the mode to output to firewire when you have it connected to FMLE? I also have experienced devices not showing up when connected when the device is not on or sending out a picture. They also don't show up usually when you connect it or turn it on when FMLE is already running (which can be fixed by closing it and restarting the program).

MBA 11" not recognizing Canon camera

My Canon S95 camera is recognized normally on my home iMac and iPhoto opens. However, I am now traveling in Europe with my new MacBook Air 11" and find that camera is not recognized and does not appear on USB device list under Sys Profiler. Have tried resetting SMC and NVPR.
No other problems with camera or MBA.

Lightwave wrote:
My Canon S95 camera is recognized normally on my home iMac and iPhoto opens. However, I am now traveling in Europe with my new MacBook Air 11" and find that camera is not recognized and does not appear on USB device list under Sys Profiler. Have tried resetting SMC and NVPR.
I have no problem with my S95 and 11" MBA. Could the problem be with the camera's memory card (I use sandisk)?

Yosemite not recognizing Logitech Camera

Title says it all
Not recognizing my Logitec HD cam
Suggestiobns?
Thanks,

Thanks Brendan. It was a case of trying to swap out some bad drives, reconfigure and update to Yosemite all at once and the cam has been used just fine for several years
It seems that either a connection was loose or it was particular about being in a direct USB port on the Mac Pro rather than an extension strip.
At any rate, swapped it around and everything is now functioning as it should
Thanks agin for your interest
Geoff

Cannon EOS 40D and a MacBook Pro OS X Yosemite.My Mac is not recognizing my camera anymore

My Mac recognized the camera last night and imported the pictures I took. This morning, I cannot upload new photos. (I did drop my camera, but it works fine -THANKFULLY - so I am not sure why that would make a difference). My Mac is not even recognizing that the camera is plugged into it. I went into ulitities and my camera is not showing under the USB when it is plugged in. I have put in a new battery in my camera and rebooted my Mac and nothing is working. I appreciate any idea you have on how to fix this!

The cameras are fairly rugged and can take a few knocks (they're not that fragile)... but obviously there are limits. So if the knock or drop was hard enough, I suppose it's possible that you've damaged the camera. Does the body show signs of physical damage (did it fall hard enough to damage the body?) If you are using the Mac's "System Information" utility to check the devices connected via USB then it is important that you connect the camera BEFORE you start the "System Information" utility. This is because that utility only scans the connected devices when it is started and does not re-scan if devices are connected after starting. There is a menu option under "File" -> "Refresh Information" (or press Command+R) to refresh if the camera was connected after starting. If the utility does not show the device then something is wrong with the connection (e.g. loose or bad cable, bad port, bad hub etc.). I have gone through a number of external USB hubs with my own Macs. It took a while before I finally found a hub that worked reliably. I would frequently have devices that would show up in the device list when DIRECTLY connected to my Mac, but would NOT show up if connected to a hub (even "powered" hubs). For this reason, if you are having any connectivity issues, please make sure that you are connected the camera directly to the computer. Remember, there are no drivers needed for the device to show up -- so if it doesn't show up it is not a software problem. As a backup plan, it is possible to directly import the images from the computer into the computer without using the camera. I think the 40D uses Compact Flash, but you can get an inexpensive Compact Flash reader (I have a Lexar USB 3.0 reader that has both a CF card slot as well as an SD card slot.) This is actually my preferred method to perform imports because direct reading from the card is faster than transfering via the camera's USB connection.

Opening RAW files in Bridge - not recognized as "Camera RAW files"

I would appreciate any help with this as I am frustrated after spending hours trying to figure this out:
I use a Mac OS X laptop
I have a Panasonic (DMC FZ8) camera that I've been taking RAW pictures with. I plug my camera into my computer and try and open the RAW files directly from the camera using Bridge (I have Photoshop CS2)..I have also tried copying the files to a folder on my desktop and opening from there. The problem is that Bridge doesn't recognize my .RAW files as actual "Camera RAW" files and the icons remain as the Preview icon and not actually a preview of the image. If I click on it to open it in Photoshop the "Photoshop RAW Options" come up set on 8 bits and when I open it, it's just a gray screen. I have checked the settings for RAW Camera and the Panasonic RAW files .raw is selected. I have also tried selecting "show only camera raw files" in my window that is open and my .RAW files that are there gray out - so the program isn't recognizing them.
I just downloaded the Plug-in 3.7 Camera Raw and had to create folders for it in Application Support/Adobe/Plug-Ins/CS2/File Formats. the only folder I had was Application Support/Adobe so the rest I created.
I'm now lost as to what I should do next. Nothing I try seems to be working.
PLEASE HELP!

>I plug my camera into my computer and try and open the RAW files directly from the camera
Ouch! Ouch! Ouch!
That is a monumentally bad idea. Transfer the closed files to your local hard drive first.
This excerpt is from a long-gone post by the late, lamented author Bruce Fraser:
Bruce Fraser - 4:17pm Jun 14, 04 PST (#5 of 21)
Opening files directly from the camera is a bad idea for a variety of reasons*, and it most certainly isn't faster than using a FireWire or USB2 card reader.
         Drains the camera battery
         Runs the risk of the software you're using to open the images writing to the card and destroying the format
         Runs a small but significant risk of USB power frying the camera
         Slowest method known to mankind of getting images off a CF or SD card

FMLE is not recognizing my camera.

Similar Messages

Maybe you are looking for