FMLE with Blackmagic Design H.264 Pro Recorder (or other similar HD-SDI to USB devices)

Anyone know is Flash Media Live Encoder will see the Blackmagic Design H.264 Pro Recorder as the video device?
http://www.blackmagic-design.com/products/h264prorecorder/
I have tested it with the Ion Audio Video2PC Mk II device and it works just fine.  That device is for capturing standard SD video at DVD res.
The BMD Pro Recorder has all the full broadcast standard inputs and puts it out to USB 2.0....
I called BMD and they said they haven't tested it but to ask Adobe.
Thanks!

I talked with BMD and they said the H.264 recorder is not Microsoft Direct Show compliant.

Similar Messages

  • Long encoding times for footage captured with BMD H.264 Pro Recorder

    Hi there,
    I'm experiencing very long render times when encoding footage captured with the BMD H.264 Pro Recorder. Watching it encode (either through Premiere CS6, or AME) it looks like the encoding stops for periods of time. With other footage I can encode a 50 minute project in about 15-20 minutes, encoding with footage from the Pro Recorder is almost 1:1 in terms of project length/encode time.
    The Pro Recorder uses QuickTime for H.264 captures, so don't know if that is causing issues. Don't seem to have the same issue with other H.264 formats.
    System Info:
    Windows 8 Enterprise (RTM)
    HP Z820 with dual hexcore processors, 32GB RAM
    Quadro 2000 plus Tesla for Maximus configuration
    All latest updates have been installed (yesterday)
    MPE is enabled for project
    Also tested on a Z800 with Windows 7 and got same results
    Editing the footage is fast and playback through timeline looks great. Anyone have a suggestion?
    Thanks,
    Jeff

    QuickTime is still a 32 bit process and the 64 bit PP has to use a sort of "band-aid" to make QuickTime files work right.  It's possible that might slow things down.

  • Blackmagic H.264 Pro Recorder (H.264 Encoder) kompatibel mit Premiere Pro CC?

    Hallo, ich habe einen Blackmagic H.264 Pro Recorder (H.264 Encoder) mit dem ich bisher über die Blackmagic Media Express Software Aufnahmen importiert habe. Leider captured Media Express diese nicht mehr obwohl der Recorder erkannt wird. Blackmagic gibt an das Premiere Pro CC ebenfalls kompatibel mit dem Recorder ist. Ich habe mir nun CC als Testversion heruntergeladen, aber leider erscheint bei ,Aufnehmen‘ ,Aufnahmegerät offline obwohl der PC das Gerät erkennt. Ich nutze Windows 7 64 bit. Kann mir jemand weiterhelfen?

    QuickTime is still a 32 bit process and the 64 bit PP has to use a sort of "band-aid" to make QuickTime files work right.  It's possible that might slow things down.

  • FMLE and blackmagic design ultrastudio sdi ?

    hi all,
    I would like to know if "blackmagic design ultrastudio sdi" works well with FMLE before buy one.
    Regards
    Nicolas

    We (KulaByte/Haivision) have been working with Blackmagic engineering on the USB 3 issues.  It turns out that the Blackmagic DirectShow drivers had some issues that needed to be addressed; Blackmagic's native drivers have been working fine with USB 3.  The KulaByte encoder as well as FMLE use DirectShow drivers for capture and thus explains the problems we have all been experiencing with the USB 3 Blackmagic devices.  The DirectShow USB 3 issues have been resolved in the "Desktop Video 9.0 for Windows" driver and the Intensity Shuttle and UltraStudio Pro are both working with the KulaByte encoder; we will be testing the UltraStudio SDI but it should work if the other two do.  It is likely that FMLE will work now as well.
    Regarding which laptop to use, we have successfully used the Dell E6420 and the Dell Precision M4600 which both have a relatively recent NEC/Renesas USB 3 chipset.  Make sure you update your laptop to the latest BIOS and follow the instructions with the Blackmagic USB 3 device to update both the firmware and driver for the USB 3 chipset except update to the most recent versions, not the older version shown in the Blackmagic instructions.

  • My MacBook Pro blacks-out when I plug in any USB device. It then doesn't start up until I open the bottom casing and reconnect the battery connector and start it up again. Why is this happening and how do I fix it?

    what could be the possible causes for this?
    Also, when it is at its blackout stage, the macbook charger flashes dim orange lights.

    Apple Does Not recommend that. Please Read.
    http://support.apple.com/kb/HT1490
    From that article
    "Portables with built-in batteries"
    Current Apple portable computer batteries are pre-calibrated and do not require the calibration procedure outlined in this article. These computers use batteries that should be replaced only by an Apple Authorized Service Provider.
    MacBook 
    MacBook (13-inch, Late 2009) and later
    MacBook Air
    MacBook Air (all models)
    MacBook Pro
    MacBook Pro with Retina display (all models)
    MacBook Pro (13-inch, Mid 2009) and later
    MacBook Pro (15-inch, Mid 2009) and later
    MacBook Pro (17-inch, Early 2009) and later
    Thanks.
    Allan Mac wrote:
    Apple recommend calibrating the battery when you buy a new Macbook and then every few months, or monthly if it used on mains all the time. This, as Apple says is to keep the battery operating at maximum efficiency. When the battery discharges and shuts the macbook down, it still has reserve power for a good number of hours. There is also a logic board battery to hold various settings.
    I rather think I will take Apples advice on using their equipment not yours, but I would be intrigued to discover what is it you know that Apple doesnt about its batteries?
    Allan

  • Adobe Premiere Pro CS5 with Blackmagic Multibridge Pro

    After having upgraded to Premiere CS5 and Blackmagic 7.6.4, I am experiencing a short list of undesirable video playback results (that were not present in CS4 with Blackmagic 7.6).  The issues are likely specific to Blackmagic with Premiere, so I'll spare everyone the details for now -- If anyone out there is using a similarly equipped system, please chime in--I'd like to run some of this past you, see if you're having the same issues and troubleshoot either way.  Thanks!
    Windows Vista Ultimate 64-bit SP2
    16GB RAM
    Intel Xeon  24GHZ (dual quad-core 3GHZ processors)
    CalDigit 2TB Raid
    Blackmagic  Multibridge Pro

    In the time since my original post, both Adobe and Blackmagic have released several updates, resolving most of the issues which led me to start this thread. Still, there are always quirks and curiosities specific to each editing system and its unique configuration, so I'll just bump this thread with an open invitation to anyone--with problems, questions, kudos or curiosities--regarding the use of Adobe Premiere Pro software with Blackmagic Design hardware.
    OS:  Windows 7 Ultimate 64-bit
    CPU: 24GHz (dual quad-core Intel Xeon E5450 @ 3GHz)
    RAM: 16GB
    GPU: NVIDIA Quadro CX v259.81
    DRV: RAID5 2TB CalDigit HDOne PCIe
    Blackmagic Multibridge Pro v7.7.3
    Premiere Pro CS5 v5.0.3

  • PP CC 2014.2 no longer will Playback to Blackmagic Design Mini Monitor. But CC and CC 2014.1 did.

    The latest update to Premiere Pro has created problems. Sequences are frozen from playing and there is no video out to the broadcast monitor. If "Enable Mercury Transmit" is turned off then the timeline will play.  There is not a problem with the Blackmagic Mini Monitor as it works fine with AE CC 2014.2 or with Premiere Pro CC. And it worked fine with Premiere Pro CC 2014. Of course we can't use PP CC to open any projects created since updating to CC 2014. We are editing commercials and must have broadcast monitoring.  PLEASE HELP. AGENCY COMING IN TOMORROW FOR EDIT SESSION!
    Also, another odd problem is that in this version when I open an existing project, it opens with random older sequences instead of what was open when it was saved/closed. This never happened in other versions.

    I experienced the same problem. Try the following:
    1) Uninstall BlackMagic Design Desktop Video and Drivers completely.
    2) Reboot to finalize uninstall.
    3) Install old BlackMagic Design Desktop Video v.10.1.4.
    4) Restart
    In my case rolling back to v10.1.4 helped to solve the problem.
    Please report here if this works all right.
    I am not sure who to blame: Adobe for their update or  BlackMagic Design for a buggy driver.

  • Problems with USB device when using WindowsNT

    Hi,
    my problem is that I want to use a simulator which can only be connected with USB to the computer.
    I used the VISA Driver Development Wizard as discribed in this link (http://zone.ni.com/devzone/conceptd.nsf/webmain/6792BAB18242082786256DD7006B6416) and it didn't work.
    I'm using Windows NT and VISA 3.1 and I read that it isn't possible to create a USB connection with VISA when using Windows NT. So my questions
    1) is this right
    2) Has someone a idea what I can do? I tried to use VISA USB Control and this also didn't work.
    I hope I discribed my problem detailed enough. It's my first post.
    Thanks for your responses
    Joerg

    As you can see in this table, USB is not supported by VISA under NT:
    http://digital.ni.com/public.nsf/websearch/EE34F21ECC2BE01286256C52005D1A1F?OpenDocument
    I would recommend to use Win2000 or XP. Using one of these OSes you could use this turorial  to create your VISA-driver:
    http://zone.ni.com/devzone/devzoneweb.nsf/Opendoc?openagent&1D0DD81FF1448CAE86256D90006EE2B4
    If it is not posssible to change the OS, you have to look for other ways of programming your usb-device. Check the web or the Microsoft site for help concerning Windows SDK and USB.
    Hope this helps a little!

  • CS6 Error message:  "A low-level exception occurred in: Blackmagic Design (recorder) "

    Hi,
    I have problem when install Adobe Pr Pro CS6 with DeckLink HD Extreme 3D
    My workstation have configuration as following:
    Supermicro workstation
    Super Micro x8DAL-i
    Intel Xeon E5645 2.40Ghz
    4GB DDR3-RAM x 2
    NVIDIA Quadro 2000 1GB Graphics
    250GB SATA 7200 RPM
    2TB 7200 RPM SATA x 2
    DVDRW
    Window 7 Pro 64bit
    I can capture with  Media Express but when I try to capture from CS6 with Decklink HD Extreme 3D,   the Error message:  “A low-level exception occurred in: Blackmagic Design (recorder) “
    Any one can help me urgent please
    Thank you,
    Dragonhn

    I have seen an issue with the latest Blackmagic driver and capturing with the current version of Premiere. I would use Media Express to capture and then just import the files.
    Eric
    ADK

  • Blackmagic Design Intensity Pro HDMI card

    Hey I work with Final Cut Pro 6.0.5 on a Mac Pro OS x 10.5.7, and we are looking into getting a Blackmagic Design Intensity Pro HDMI card. I'm just looking for assurances that these cards do work with my version of final cut pro, and any tips or tricks to installing and working with them.
    Thanks,
    Tim McDonald

    I have the Intensity, didn't need the pro. The card works, though sometimes flakey. Audio always work fine when playing through HDMI to monitor (if monitor has speakers) but video is hit or miss. While it does work more often than not, there are times when I have to sit and keep switching the resolution output from 720/60, to 720/59.94 to 1080i/59.94 and so on just to get a picture. It's annoying and honestly sometimes it takes 5 minutes to get it work.
    Blackmagic's awesome support told me the reason I was having problems was because I had a cheap HDMI cable. Apparently it works flawlessly all the time with Monster $150 HDMI cables. Bulls...
    Make sure you have the newest Blackmagic software. I believe they are on version 3.2.

  • Does Flash Media Live Encoder work with all the blackmagic-Design Decklink Studio?

    Does Flash Media Live Encoder work with all the Blackmagic-Design Decklink Studio?

    Well, I have my XH A1 Canon video camera hooked up to Shuttle Thundbolt as composite and the thunderbolt to my Macbook Pro (Late 2011 - 2.4GHz, i7, 16GB Ram) and FLM 3.2 does not see my camera.
    When I hook my same camera up to my Windows i7, 2.8Ghz, 8GB Ram using my "Hauppauge capture card" as composite it can see my camera.
    I'm going to try a simple VHS tape deck and see if my macbook pro can see it using the Shuttle Thunderbolt. I'm going to guess and say it won't.
    I installed the drivers as well.
    Evan

  • Premiere Pro CC 5 支援 Blackmagic Design Control Panel.

    我在去年試用2014 Premiere Pro CC時.可以使用我之前安裝的Blackmagic Design Control Panel. 但今年初向Adobe 購買2014 Premiere Pro CC使用時.卻發現編輯無法使用Blackmagic Design Control Panel來預覽畫面.此問題一直困擾著我.

    Hi Piero,
    Here's a few ideas you can try.
    1. Place your Blackmagic card in slot 2
    2. Set your OS system sound to Built-in or Line out audio
    3. Set your buffer size to 1024
    4. If those settings fail to help you can place the 9.7.3 plugins into the CC folder. Here's how:
    Mac:
    Copy from:
    /Library/Application Support/Adobe/Common/Plug-ins/CS6/MediaCore
    Paste to:
    /Library/Application Support/Adobe/Common/Plug-ins/7.0/MediaCore
    Hope that is helpful. Let us know how it goes.
    Peter Garaway
    Adobe
    Premiere Pro

  • Hi! After Effects CC 2014 do not work with Blackmagic Intensity Pro.

    After Effects CC, Premiere Pro CC 2014, Photoshop CC 2014 work correct with Blackmagic Intensity Pro.

    Uninstall the Blackmagic drivers and install the latest version.
    If that doesn't help, make sure you are using a comp size that matches a frame format supported by the Blackmagic card.
    Rather than repeat myself, here are other threads where I've replied about similar issues. Please read through them.
    AE CC 2014 Mercury Transmit kills odd sizes
    mercury transmit doesn't work with my blackmagic studio 2 card
    Problems with preview video with BM ultrastudio mini monitor and AE CC 2014
    Here is more information about Mercury Transmit in After Effects CC 2014 (13.0): http://bit.ly/AE_video_preview

  • Hello I was useing final cut pro 7 . I was sending video with blackmagic or i was catrue but now i cant see blackmagick my mac system is mac os x 10.7.5

    hello I was useing final cut pro 7 . I was sending video with blackmagic or i was catrueing but now i cant see blackmagick my mac system is mac os x 10.7.5

    Thank you for your reply. My problem is I used to be able to send video via Blackmagic.  But now I can not find the Blackmagic in the menu of premier. How can I divert any bridge with thunderbird or firewall?
    Samsung cihazımdan gönderildi

  • QT Pro recorded video not compatible with FCP?

    Is a video recorded in QT Pro compatible with FCP?
    I was getting errors earlier today importing QT video clips recorded in QT Pro.
    FCP said "unknown file type" and wouldn't import it.
    I tried different decks, different footage, all to no avail.
    Drag and drop, file>Import, neither worked.
    I never tried this before and was surprised.
    It's not that it needed rendering, it just wouldn't import.
    QT was set to use the native format of the recording device.
    FCP was set to DV NTSC easy set up.
    OS 10.4.7, QT 7.1.2, FCP 5.0.4.
    Thanks,
    Richard
    G5 dual 2 gig   Mac OS X (10.4.7)  
    G5 dual 2 gig   Mac OS X (10.4.7)  

    The files open fine in QT player.
    640 X 480 was the QT captured frame size, 29.97 fps, and it was captured as "device native" in QT preferences. The source tapes where mini DV/NTSC so its frame size should be 720 X 480.
    If this frame size is the problem, why is QT pro recording a 640 X 480 image when the original is 720 X 480? Also, can't FCP handle a 640 X 480 QT video size anyway?
    I tried different tapes with different decks and kept coming up with the "file not recognized" error when trying to import into FCP.
    Thanks for your help,
    Richard
    G5 dual 2 gig   Mac OS X (10.4.7)  

Maybe you are looking for

  • How to have Dynamic Columns based on Work centers in CRHD table?

    i need to create dynamic internal table......based on the number of entries(work centers ) in CRHD table....this is number of work centers...like how many manufac unit....How to have the work center names at heading and how to fill values at rows...a

  • Connect new g5 to wireless

    I just got my G5, I forgot to order it wireless internet ready so I got the airport extreme card. When setting it up I opened the computer and can't find the antenna cable the intructions mention. I don't think it came with the computer. What do I do

  • User Profile DS_Export

    I have been following this guide. Unfortunately, I am unable to get the sync from SharePoint to Active Directory. I get the following error in FIM: permission-issue, Insufficient access rights to perform the operation. I get successes for MOSS_EXPORT

  • How can I keep metadata on an embedded EPS file in AI?

    How can I keep metadata on embedded EPS images (from Photoshop) in Illustrator, like it does for JPG? The top image is an eps I embedded, and the bottom one is a JPG. They are both located on a remote server. Any help will be appreciated. Thanks!

  • ITunes 9 Home Sharing Error -3259

    I was so excited about the Home Sharing Option with iTunes 9... until I tried to use it. It says to check that firewall software is allowing communication on port 3689. Well, it is, but home sharing still won't work. HELP!