FMS 2 on Suse Linux 9.1 - Rootserver

Hi,
i installed the Flash Server 2.0.1 developer version on my
Suse Linux 9.1 Root Server.
I can't loggin to the FlashServer Management Console
Interface
What exactly i need type in to the "Server Adress" Field?
I tried ServerIp:PortNr and ServerHostName:PortNr --> I
use 1111 as PortNr
I think the service doesn't start.
If i type this command:
./fmsmgr adminserver start
i get:
Admin server:fmsadmin command:start
Starting Macromedia Flash Media Admin Server (please check
/var/log/messages)
if stop with
./fmsmgr adminserver stop
i get:
Admin server:fmsadmin command:stop
Stopping Macromedia Flash Media Admin Server (please check
/var/log/messages)
fmsadmin: no process killed
Admin Server has shutdown...
./shmrd: error while loading shared libraries: libnspr4.so:
cannot open shared object file: No such file or directory
if i type:
./fmsmgr list
i get:
Macromedia Flash Media Server services:
fms
Macromedia Flash Media Server running services:
Processes for service "fms" in directory:
/srv/www/htdocs/web1/html/stream/fms
** no server process **
** no administration server process **
MY Admin Name and Password 100% correctly.
After reinstallation i get this Message:
Installing Macromedia Flash Media Server files...
Configuring Macromedia Flash Media Server...
Adding "fms" service.
Setting default admin to "fms".
fms 0:off 1:off 2:off 3:on 4:off 5:on 6:off
Setting autostart for "fms".
Server:fms command:start
NPTL 0.61
Starting Macromedia Flash Media Server (please check
/var/log/messages)
Admin server:fmsadmin command:start
Starting Macromedia Flash Media Admin Server (please check
/var/log/messages)
The Macromedia Flash Media Server installation is complete.
My questions:
1. How can i check out over SSH command whether the
FlashServer works correctly?
2. If i download and install the Script with the root
Account, what i need to enter, witch during the Flash Media Server
processes for default "user" and default "group"?
3. Can can i cange without some Problem the default path
during the installation?

The Answer is in your port TrippleEx.
You must install libnspr4 library first.

Similar Messages

Help me on Installing FMS on Suse 10.2

hiii, please help me install FMS on suse 10.2
i installed it using ./installfms -platformWarnOnly
It was successfully installed as the script displayed at the
end.
But the service is not started , nothing in
/var/log/messages, so i tried to run fmscore from
/opt/macromedia/fms/ it prints me this error
./fmscore: error while loading shared libraries: libssl.so.4:
cannot open shared object file: No such file or directory
i made sure that openssl 9.8d is installed, i tried to
installed the newer version openssl 9.8e and still figuring this
problem
any help plz ?? i need to make it work on this distribution
thanks in advance

user543916 wrote:
... but I can not find any tutorial of how to install it on ubuntu8.10.
or if they are 8664bits version of the product ?No, 64-bit version of XE don't exist with a good reason (1 GB RAM limit).
Very useful article about installing XE on Ubuntu is available here:
http://www.oracle.com/technology/tech/linux/install/xe-on-kubuntu.html
HTH

Install of SuSE Linux 9.0 freezes early on

I recently upgraded to an MSI 865PE Neo2 motherboard, with a P4 2.8 GHz processor. I've installed Windows XP Professional without difficulty, but I tried to install SuSE Linux 9.0 and it locks up early on in the boot process during "hardware detection." Opinions on this forum about earlier versions of SuSE and the YaST program were fairly poor, and their own site says that support for the Neo2 is only "partial." Has anyone gotten Linux to install successfully on this mobo, and if so, which flavor?

I have a Neo2-S and have mixed success w/ Linux as well. I just tried SuSe Live 9.2 and it took me about 10 times to get it to boot. I think the only thing that I changed when it actually booted was the option to make the boot screen verbose. I hit something like F3 and changed that option.
Knoppix 3.3 works great for me
Knoppix 3.4 doesn't boot
Mandrake Move 10 doesn't boot
I may have some of the version numbers wrong because I am just typing them off of the top of my head. I also have only tried the bootable CD version because I don't want to risk any conflicts w/ my Win XP.
I am also about to get a new 200 GB SATA drive and I know that is going to complicate things even further. I just wish that the devs would spend more time working on hardware support so n00bs won't have probs when trying out Linux.
They really need to make all distro's of Linux be able to use all of the IDE/SATA channels in a system. This is probably dependent on the kernel though. I don't know that much about Linux.

NetWeaver 2004s installation problem on Suse Linux

Hi,
I downloaded NetWeaver 2004s 90 days version from SDN and installed on Suse linux. I am not able to execute command to get the license after installation. Here is the line I executed
add user n4sadm
unpacking adm_env.tar.bz2
Changing password for n4sadm.
New Password:
Bad password: it is based on a dictionary word
Reenter New Password:
Password changed.
add user sdb
Changing password for sdb.
New Password:
Bad password: it is based on a dictionary word
Reenter New Password:
Password changed.
add user sqdn4s
unpacking sqd_env.tar.bz2
Changing password for sqdn4s.
New Password:
Bad password: it is based on a dictionary word
Reenter New Password:
Password changed.
unpacking /mnt/iso/server/TAR/x86_64/SAPDB_I.tar.bz2
unpacking /mnt/iso/server/TAR/x86_64/SAPDB_II.tar.bz2
unpacking /mnt/iso/server/TAR/x86_64/SAPDB_III.tar.bz2
unpacking /mnt/iso/server/TAR/x86_64/SAPN4S.tar.bz2
Service visinet-gui on port 3601/tcp was deactivated...
Service cpq-tasksmart on port 3201/tcp was deactivated...
Service netxms-mgmt on port 4701/tcp was deactivated...
Service iwec on port 4801/tcp was deactivated...
Service tick-port on port 3200/tcp was deactivated...
Service netxms-agent on port 4700/tcp was deactivated...
Service iims on port 4800/tcp was deactivated...
Update the necessary information in sysctl.conf:
kernel.shmmax = 23136829430
kernel.shmall = 5242880
kernel.msgmni = 1024
fs.file-max = 32768
kernel.sem = 1250 256000 100 1024
Found interface: eth0 . Alias is eth0:0
ifconfig eth0:0 192.168.155.1 up
Ok
n4shost:n4sadm 35> /usr/sap/N4S/SYS/exe/run/saplicense -get
/usr/sap/N4S/SYS/exe/run/saplicense: Exec format error. Binary file not executable.
Can any one help me to complete the installation and execute the server successfully. I am very new to linux. Do i need to execute any other commands to complete my installation.

Dear Rajasekhar,
this error simply comes, because the architecture of your computer is not the same as the one from the test drive. As I'm not sure, which architecture the N4S test drive uses, we simply have one of the following situations here. Either
your machine is x86_64 and the N4S is i386 or
your machine is i386 and the N4S is x86_64.
Please check!
Thanks,
Hannes

Oracle 10g Installation Problem on SUSE Linux 10

Hello Friends,
I want to install SAP Solution Manager 7.0 with Oracle 10g on SUSE Linux 10.0.
But, while starting the Installation i am getting following Errors.
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1,
asianux-2 or SuSE-10
                                      Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-04-22_03-59-38PM. Please wait ...
Error in writing to directory /tmp/OraInstall2009-04-22_03-59-38PM. Please ensure that this directory is
writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
I have checked the Permissions and the Size of /tmp Directory, which is as followed:
drwxr-xr-x 11 root root    0 2009-04-22 21:19 sys
drwxrwxrwt 52 root root 1824 2009-04-22 16:00 tmp
drwxr-xr-x 15 root root 408 2009-04-19 14:43 usr
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/sda10             2104376     73112   2031264   4% /tmp
I am starting the Oracle 10g Installation within orasm7 User which is a member of dba, users, disk groups.
The directories which are created upon starting the Oracle Installation in /tmp directory are having the situations as followed:
drwxr-xr-x 3 orasm7   dba          128 2009-04-21 18:41 OraInstall2009-04-21_06-41-14PM
drwxr-xr-x 3 orasm7   dba          128 2009-04-21 18:41 OraInstall2009-04-21_06-41-25PM
drwxr-xr-x 3 orasm7   dba          128 2009-04-22 15:59 OraInstall2009-04-22_03-59-38PM
The Oracle Installation log is as follwoed:
Using paramFile: /home/MyData/51031676/database/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
                                      Passed
All installer requirements met.
The commandline for unzip:
/home/MyData/51031676/database/install/unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.0.8
/1/DataFiles/\*.jar -d /tmp/OraInstall2009-04-22_03-59-38PM
I have set DISPLAY variable in this way before starting Installation:
DISPLAY=$HOSTNAME:0.0
export DISPLAY
I tried to search the solution over the internet for this kind of problem, but i am not able to find its solution. Even i tried to start the Orale installation using this parameter: ./runInstaller ignoreSysPrereqs, but still it is giving the same unexpected error.
I have a doubt on File/Directory permissions which are created for Installation in /tmp. The umask setiing of the system is 0022.
Please, help me for this issue.
Thanks & Regards,
Bhavik G. Shroff

Hi Markus,
How are you ?
Thank you very much for your reply.
I was executing wrong runInstaller file. RUNINSTALLER is right file for starting the execution. But still i am facing the same error, which is as followed.
Preparing response files. Please wait:
======================================
Working on /home/MyData/51031676/database/SAP/SVRCUSTOM.RSP
/home/MyData/51031676/database/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.27450: Done
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
                                      Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please wait ...
Error in writing to directory /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please ensure that
this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
SHROFF:~ # cd /home/orasm7/tmpora/
SHROFF:/home/orasm7/tmpora # ll
total 0
drwxr-xr-x 3 orasm7 dba 128 Apr 22 17:25 OraInstall2009-04-22_05-25-26PM
SHROFF:/home/orasm7/tmpora # cd OraInstall2009-04-22_05-25-26PM/
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM # ll
total 4
drwxr-xr-x 2 orasm7 dba 304 Apr 22 17:25 images
-rwxr-xr-x 1 orasm7 dba 504 Apr 22 17:25 installActions2009-04-22_05-25-26PM.log
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM #
I have a doubt on tmp_netca_file & tmp_dbca_file variable.
Please give your suggestion for the same.
Regards,
Bhavik G. Shroff
Edited by: Bhavik G. Shroff on Apr 22, 2009 2:10 PM

Installation problem Oracle 9i on SuSE Linux 7.2 s390

Hi all
I've got a problem after having installed Oracle9i on a S390 box with SuSE linux 7.2. When I launch sqlplus, I've got the following message :
sqlplus: error while loading shared libraries: libclntsh.so.9.0: cannot load shared object file: No such file or directory
It appears the shared library libclntsh.so.9.0 was not included in the tarball I've downloaded from the Oracle site.
Any idea ?
Thanks
Frangois Basquin

Forget my question : I've found the answer in the document ID 158104.1. Even if my problem was not exactly the one mentioned (I hadn't any problem during compile time), the cure was good.
Frangois

9i and 9ias installation on SuSE linux 7.3

Hi,
Are there any known issues involved in installation of 9i
and 9ias on SuSE linux 7.3 ??
Also please let me know what are the workarounds for those
problems and where the patches may be downloaded from ??
I am asking this question because SuSE 7.3 is not yet
certified by oracle.
Thanks,

For the database, look at
http://www.suse.com/en/support/oracle/db/9i_73.html

Oracle9i Installation on SuSe Linux 7.3 Professional Edition

Hi,
I'm trying to Install Oracle 9i Database server on SuSe Linux 7.3 Professional Edition. I have gone throgh the Oracle 9i release notes for the Linux version. In the release notes document, in the OS Software Requirement section ( the following statement is mentioned as below ):
"The following executables must present in the /usr/bin directory : make, ar, ld, nm"
But after the Linux insalltion I found that only make executable is present and other doesn't. My doubt is, if I continue with the Oracle Installtion without these files does the installer cause any problems? If so how do I get these executables, as these executables doesn't exist in the "Software Installation" listing of SuSe 7.3 Professional edition?
Another doubt is, Does SuSe 7.3 Professional edition suitable for Oracle 9i Database server? I checked the Kernal version, it seems to be OK.
Please help.
Thanks in advance
Sriram Subbiah

Hi,
I'm trying to Install Oracle 9i Database server on SuSe Linux 7.3 Professional Edition. I have gone throgh the Oracle 9i release notes for the Linux version. In the release notes document, in the OS Software Requirement section ( the following statement is mentioned as below ):
"The following executables must present in the /usr/bin directory : make, ar, ld, nm"Thats compiler, linker and linktool, install "binutils"!
Sincerly,
Christine

Developer 6i on suse linux 7.3 INSTALLATION gives me 'rdbms' error ? what can i do ?

hi
i am trying to install developer6i release 2 on suse linux 7.3 and before installation get the following error :
rdbms' software is not available in the current
distribution source and has not been installed.
You must obtain and install 'rdbms' software from
some other source first.
Note: You may also get this error if the Installer
registry file has been overwritten
what can i do to fix this ???

hi
i am trying to install developer6i release 2 on suse linux 7.3 and before installation get the following error :
rdbms' software is not available in the current
distribution source and has not been installed.
You must obtain and install 'rdbms' software from
some other source first.
Note: You may also get this error if the Installer
registry file has been overwritten
what can i do to fix this ???

Redhat or suse linux installation on lenovo g560

Hi,
I have a linovo g560 with os window xp,now i want to install redhat linux,also tried to install suse linux on my laptop with cd.but after some screen and runnibg kernel the cd drive and hard drive detection gets failed.and the installation mode goes to manual with install driver screen.i tried every driver but cd not get detected setup always say insert cd 1 into drive press any key when ready something this type of message.there are also eject cd button but that don,t work.i tried to text mode also but same situation for that mode also.i am not having more linux experience can anyone please help and suggest me to how to install redhat on my system redhat version 4 enterprise edition i am using for installation i have another cd of suse ver 10 but none of them get install,cd drive detection get failed
thanks in advance

If you have a pendrive, you can use Universal USB Installer to copy all files into it, and install Linux.
Look this page: http://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/
IPnaSh
First Spanish Community Guru - Colaborador ad honorem

Can not focus or edit on JTextField on SuSe Linux 9.1

Hi,
I am trying to debug a strange problem with JTextField on SuSe Linux 9.1.
The problem is that the mouse click can not gain focus to the JTextField
in a very high frequency. Once problem occurs, the keyboard tab also
does not work. The problem does not happen all the time.
I wrote a simple event listener that dump out events that confirm that
the TextField got the mouse click event.
We are using JDK1.4.2_05.
The same piece of code works fine with Windows XP and RedHat.
I would greately appreciated if you have any suggestion to debug this
issue.
Thanks,

The first thing to do is identify which of the two rows with the same key value are correctly referenced by rows in other tables. If all referencing rows relate to only one of the errant pair then you can insert the non-key values from the other
one into a new row, and then delete the original 'bad' row. If you find that there are rows in referencing tables which relate to each of the errant pair, then, after copying the non-key values from one into a new row and deleting the 'bad' original,
you'll need to change the foreign key values in those rows in any referencing tables which related to the 'bad' original to the value of the primary key in its replacement row. You'll need to delete the relationship before doing any of this of
course.
Once you've done the above I'd then be inclined to copy the table to a new one under a different name, delete the original table, rename the copy to the original name, and then re-create the enforced relationship. Finally, compact and repair the database.
Ken Sheridan, Stafford, England

C++ - JNI on a SuSe Linux - Can't seem to find my Java files

Hi all,
I have been playing around with the JNI for a bit now on my windows box and got it working fine and all :) Now, however, I need to port my stuff to a SuSe linux, and I have started out really basic - just trying to start the JVM too see how that went... badly, would be the answer to that question, in case you were wondering.
I made a really simple textbook example (alot of those, when searching this forum - and searched, I have) to just create myself a JVM. I am not even daring to actually try and find any classes, call methods or anything as bold as that yet.
My example compiles fine, but when I run the program I get this error message:
"Can't find class java.lang.NoClassDefFoundError. Invalid class path ?"
Now, please note, this is not the actual NoClassDefFoundError exception being thrown here, but looks to me as if the system wanted to throw that exception object, but couldn't even find the object to throw at me ;-)
This leads me to believe that there's is something really basic wrong with my Java setup here. I can run "java" just fine from the commandline, but it occurs to me, that the JVM, when invoked via the JNI, can't find it's own stuff.
Any suggestion what needs to be done here?
I can post code if that helps, but I doubt that is the problem - as it is really textbook stuff and I can get this stuff to work on Windows. I think the problem is "external" to my code, as it happens before I even try to use the JVM. Maybe some env vars needs to be set? I have manually tried to export a CLASSPATH variable, just to see if that helped - I even tried adding full path to core.jar in my "-Djava.class.path" property ;-)
I have tried removing and adding the Java RPM's again (Java version 1.4.1 FYI) to no avail aswell.

Hi,
As you hv started working on JNI. You must know the following things.
1. If you want to work on Windows they must hv to hv a .dll file of your c/C++ program while on linux you should have .so file. i.e. shared object file.
2. On Linux you should set LD_LIBRARY_PATH environment variable to your the path where you have stored your .so file.
Let me know if you do have above things and still getting error.
- Uday
P.S. You will find help on internet abt How to make dll's and .so file?

Installation ColdFusion MX 7.02 on SUSE Linux 10

I tried to install ColdFusion MX 7.02 on SUSE Linux 10 with
Apache 2 web server and I have this very unusual error. ..
./coldfusion-702-lin.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer
archive...
Configuring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot
open shared object file: No
such file or directory
dirname: error while loading shared libraries: libc.so.6:
cannot open shared object file:
No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1:
cannot open shared object file
: No such file or directory
basename: error while loading shared libraries: libc.so.6:
cannot open shared object file
: No such file or directory
dirname: error while loading shared libraries: libc.so.6:
cannot open shared object file:
No such file or directory
basename: error while loading shared libraries: libc.so.6:
cannot open shared object file
: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot
open shared object file: No
such file or directory
/tmp/install.dir.25814/Linux/resource/jre/bin/java: error
while loading shared libraries:
libpthread.so.0: cannot open shared object file: No such
file or directory
Any ideas why it might be are really appreciated.

Take a look at
this
thread on Steve Erat's blog.

Error while trying to install NI-VISA driver on SUSE LINUX 11.1(The version of gcc in the path does not match the version of gcc used to compile the currently running kernel.)

hi i am trying to install NI-VISA driver on SUSE LINUX 11.1.
the error message it shows is
******************************** ERROR ****************************************
* The version of gcc in the path does not match the version of gcc used to    *
* compile the currently running kernel. This can cause unpredictable         *
* behavior in kernel drivers and should be fixed.                             *
* gcc version: Linux)                                                          *
* kernel compiled with: 4.3.2                                                 *
******************************** ERROR ****************************************
my kernel source version is
linux-8nes:/home/admin # rpm -qi kernel-source
Name        : kernel-source                Relocations: /usr/src
Version     : 2.6.27.29                         Vendor: openSUSE
Release     : 0.1.1                         Build Date: Sun 16 Aug 2009 03:43:52 PM IST
Install Date: Sat 24 Oct 2009 02:13:12 AM IST      Build Host: rinck
Group       : Development/Sources           Source RPM: kernel-source-2.6.27.29-0.1.1.src.rpm
Size        : 309251954                        License: GPL v2 only
Signature   : RSA/8, Sun 16 Aug 2009 03:57:25 PM IST, Key ID b88b2fd43dbdc284
Packager    : http://bugs.opensuse.org
URL         : http://www.kernel.org/
Summary     : The Linux Kernel Sources
Description :
Linux kernel sources with many fixes and improvements.
Authors:
    Linus Torvalds <[email protected]>
    see /usr/src/linux/CREDITS for more details.
Source Timestamp: 2009-08-15 17:53:59 +0200
GIT Revision: 8a413546901c407e96f7fba18574cceeb40452af
GIT Branch: SLE11_BRANCH
Distribution: openSUSE 11.1
i had also installed GCC 4.3.2.
it shows the error message as i had posted.
please kindly help me on this.
Thanks and regards,
P.karthick

Check this solution

Can't Install Solution Manager on Suse Linux Enterprise Server 10 - JAVA

Hello everyone!
I've been trying to complete the pre-requisites in order to install Solution Manager SR2 on Suse Linux Enterprise Server 10 x64 - SP1.
There's only one last condition that I haven't met, and it's the Java Runtime Environment version...
I checked the recommended note 867110 and it says that i need to have installed the J2SDK 1.4.2_08.
SLES10 includes the 1.4.2_13, so I had to uninstall it, and download the right version from Sun Microsystem's official webpage.
When I installed the version 1.4.2_08, i'm not able to run SAPINST because there's no Java Runtime Environment running on the server.
I started to investigate and I found in some forums [NOT EXPLICITLY] that there's no port for J2SDK 1.4.2_08 on x64 linux systems.
I can't believe this is true because SLES10 is recommended by SAP to install Solution Manager, so I hope somebody can help me on this.
My specific question is: Does anybody know if is true that J2SDK 1.4.2_08 is NOT COMPATIBLE with x64 Linux?
In case of being true, is there any way to be able to run SAPINST ? because if I enable the version SLES brings built in, i'm able to run the SAPINST but it detects that i'm not running version 1.4.2_08 and doesn't allow me to continue installation.
I hope somebody can help me soon...
Regards!

> SAPINST_JRE_HOME=/opt/IBMJava2-s390-142/jre/bin:$PATH
>
> JAVA_HOME=/opt/IBMJava2-s390-142/jre/bin:$PATH
You downloaded the wrong version - the one you have is for Z-Linux(Linux running on the mainframe - not for x64).
You need to download the x86_64 (or AMD64) version.
Install the correct one and try on a new console:
export JAVA_HOME=/opt/IBMJava2-amd64-142
export PATH=$JAVA_HOME/bin:$PATH
Then execute
java -fullversion
and it should show the correct version.
Markus

FMS 2 on Suse Linux 9.1 - Rootserver

Similar Messages

Maybe you are looking for