FMS 3.5.1 Examples work great but...

So, I've installed FMS 3.5.1 on my server and I'm able to get the sample files to run wonderfully but, now that I try to use it in the real world, it fails.
I have multiple websites that exist on a single Windows 2003 server and have installed FMS in its own directory.  So it looks like this:
D:\
    \FMS351
    \Website
E:\
    \Website2
    \Website3
When running the videoplayer.html I can view all the sample files and even my own vidoes if I don't include the [servername] but as soon as I supply either the URL or IP address, nothing.
I've tried different installations and various other ideas but to no avail.
Hopefully someone can at least point me in the right direction.
Here is a sample webpage:  http://www.sullysuniverse.com
Thank you,
Robert

All the ports but 1111 are open to the outside through my router.  1111 is now open.
(You probably couldn't see my example site because I was messing with some configurations and you may have hit it at that moment!) 
Here is something from the edge.log that I hadn't noticed before:
2009-06-19    09:52:32    3808    (i)2581173    Host: Webserver2003 IPv4: 192.168.1.125    -
2009-06-19    09:52:33    3808    (e)2631013    Failed to create listener for adaptor _defaultRoot_, IP , port 80: .    -
2009-06-19    09:52:33    3808    (i)2631174    Listener started ( _defaultRoot__edge1 ) : localhost:19350/v4    -
2009-06-19    09:52:33    3808    (i)2581252    Registering core (3800).    -
2009-06-19    09:52:34    3808    (i)2631174    Listener started ( _defaultRoot__edge1 ) : 1935/v4    -
2009-06-19    09:52:45    3808    (i)2581252    Registering core (1532).    -
2009-06-19    10:22:49    3808    (i)2581250    Edge disconnected from core (1532).
I've been trying to figure out how to fix this but haven't discovered anything yet.  Any advice?
Robert

Similar Messages

  • I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great

    I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!

    The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works.  Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up.  Try them again. 
    Google your particular isp, and ipad and many times you will find the exact settings needed for your isp.  Or tell us here, and soneone else may be on the same isp.  Some mail services need you to change a port, or have a unique name for the outgoing server.  
    Kep trying.

  • HT201272 I have tried several ways to transfer my itunes library and Playlists to a new computer. I get the music library but not the playlists. Can you advise? 2nd I purchased 21 new tunes yesterday on the new computer worked great but when I made a disc

    I have tried several ways to transfer my itunes library and Playlists to a new computer. I get the music library but not the playlists. Can you advise?
    2nd > I purchased 21 new tunes yesterday on the new computer> worked great> but when I made a disc to transfer the playlist. I get the music but no album info just 1,2,3,etc. So I have signup both computers to share thinking that would work. But no to that also.
    Please advise.
    Thanks,
    Bob

    Copy the entire /Music/iTunes/ folder from old computer to new computer.
    See this -> http://support.apple.com/kb/HT4527

  • My printer works great but I keep getting error messages from HP Solutions Center

    I'm using an HP Officejet J6480 All in One Printer on a Windows 7 64 Bit machine.  The printer works great but I kept getting error messages from the HP Solutions Center every 15 seconds that popped up making it impossible to do work on my laptop so I uninstalled the Solutions Center to try to fix the problem.  Now the printer won't print. Is there a way to re-install the Solutions Center and get rid of the pop up error messages?

    hello Danagriz, unfortunately the plugin check page lags behind. adobe has released a critical patch for a vulnerability in its flash plugin, which is reportedly already exploited in the wild. therefore firefox will block insecure versions from running by default on websites for your protection.
    https://helpx.adobe.com/security/products/flash-player/apsb14-27.html https://addons.mozilla.org/firefox/blocked/p794
    please update to Adobe Flash Player version 16.0.0.235 as soon as possible, which you can download from http://www.adobe.com/products/flashplayer/distribution3.html (use the windows-exe for plugin-based browsers).
    in order to update java, go to java.com (or if you don't need the plugin you can also uninstall it though the windows control panel)

  • Phone works great but when on a call proximity sensor kicks in turns off the screen. When I pull the phone away from my head screen is still blank. The force hangup/lock is the only way to bring the screen back on

    hi,
    phone works great but when on a call proximity sensor kicks in turns off the screen. When I pull the phone away from my head screen is still blank. The force hangup/lock is the only way to bring the screen back on.
    I purchaged it before one month onl. So i wont understand how it comes. Please help me. I am waiting for you reply.

    "Your face is so ugly, it broke your phone!" Ha ha. Get it? How I was joking there? About your iPhone not working correctly after... <sigh>
    But seriously, you said the situation only happens when you have been on a long call, so maybe the iPhone is just autolockng?

  • My Touch ID works great, but because I have been using it, I now can't remember my password

    My Touch ID works great, but because I have been using it, I now can't remember my password.
    How can I reset my password?

    Hi Each day when you power up your iphone you have to use the 4 number passcode. How can you forget this in 1 day? Cheers brian

  • I used the location app to find my daughters ipod with my ipad mini.  App worked great, but now I can't use my ipad, can't get rid of the alerte "ipod located".  Now what do I do

    I used the location app to find my daughters ipod with my ipad mini.  App worked great, but now I can't use my ipad, can't get rid of the alerte "ipod located".  Now what do I do

    Try a reset:
    Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

  • HT1338 My G5 PowerPC still works great, but what is the latest OS that is possible.  I just bought a new HP Printer and it is not compatible with OS 10.4.  Is there any hope?

    My G5 PowerPC still works great, but what is the latest OS that is possible.  I just bought a new HP Printer and it is not compatible with OS 10.4.  Is there any hope?

    A PPC G5 cannot run any version of OS X beyond Leopard 10.5.8.
    You should be able to find a Leopard retail (black) install disk on eBay. A grey update disk is machine specific and won't work.

  • My CS2 was working great but now error that my name, org and serial number are mussing and must close

    my photo shop 9 CS2 was working great but now error that my name, organization and serial number are mussing or invalid and must close>how do  I fix this I was given a download file and do no have cd to reload it??

    Does this apply?
    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

  • I have a Mac Book and purchased a Bose system that uses an antenna to play music from the the laptop - it works great, but the computer times out and shuts down - Help

    have a Mac Book and purchased a Bose system that uses an antenna to play music from the the laptop - it works great, but the computer times out and shuts down - Help

    Check in "System Preferences">"Energy Saver" to see if you have the "Computer Sleep" bar set too low.

  • I bought a iphone 4s of ebay it works great but i want to use the passcode but can't because he can't remember what he put it as

    i bought an iphone 4s of ebay and it works great but i went to set up a passcode but the person who had it before has put one on there and he can't remember what it is, is there anyway of resetting it

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
    A Complete Guide to Recover Your iDevice if You Forget Your Passcode
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • How do I stop kitkat! It trashed my razrm they replaced it, new one is working great but now 4 days later kitkat is trying to get on my new phone

    Kitkat trashed my razrm they replaced it new is working great but kitkat is trying to get on it how do I stop it? Why are they still putting it out?

        gpjfh84,
    Thanks for reaching out to us. I'm glad that you were able to get the phone replaced. There is not a way to block the Kit Kat up date from coming through. You can always reject the option to update. If you have any further questions or concerns please feel free to reach out to us at anytime.
    KevinR_VZW
    Please follow us on Twitter @VZWSupport

  • Recently started using "Remote" works great, but shows the entire library instead of only the checked songs

    Hello,
    In my itunes libraryI've got about 3000 songs, I only play 500 at a time. For my iphone I just Check the songs I want to sync, as well with Logitech SqueezBox.
    Recently I've started using the iTunes Remote, that works great, but it shows all the songs. is there any way to fix that?
    Any way to change the setting in which it will only show the Checked songs?
    Thank you very much

    Make sure you don't have the Manually manage music and videos box check on the Summary tab

  • I have a 2011 gen 2 iPad that works great but is it time to replace it?

    I have a 2011 gen 2 iPad that works great but is it time to replace it? 

    Ditto with my iPad 2 - have used it heavily since the day I bought it and it works great.  I've noticed the battery doesn't hold a charge as well and it takes quite a bit longer to recharge.  If everything keeps working I don't plan on replacing it until it can't be updated with the latest IOS version - the situation the iPad 1 is in.

  • I have new iPhone 6 all working great but problem is no any bar on signal can help me

    Hi ggot my iPhone 6 all working great but problem is no any bar on signal 02 try new sim card same problem any can help me

    Greetings andyirons,
    Welcome to the Apple Support Communities!
    I understand that you are receiving low signal strength on your iPhone. In this situation, even though the attached article was written for situations with no signal, I would still suggest working through these same steps to troubleshoot. 
    If you see No Service in the status bar of your iPhone or iPad - Apple Support
    Cheers,
    Joe

Maybe you are looking for