FMS Audio (MP3) Glitches - Hosting Issue or Not
I've got several webinars that an associate of mine helped me
build several years ago in Flash MX 2004. They are about 40 minutes
long, but have been broken into about 8 chapters (seperate .swf
files). The .swf files connect to audio (mp3) streams running off
of an external hosted FMS server via RTMP. We are using the older
MediaDisplay and MediaPlayback components from MX 2004 to play the
audio while the screens within Flash are setup with cuepoints to
sync to the audio.
This has worked for years, except the problem is that the
chapters do not always seem to make the connection to the external
FMS audio. Sometimes simply pressing the pause button on and off
will get it to play. Other times you have to refresh the screen. I
can't figure out if this is a hosting issue or not. We have tried a
few different FMS hosts at this point at about the $100/month
plans, but keep having the same problems.
What can we do to eliminate (or diminish) these connection
problems? We really don't want to redevelop these at this point in
time, so if there is anything we can do to modify what we have or
our hosting, that would be helpful.
thanks,
route3w
It sounds like the swf doesn't handle onSync correctly. I
would suggest logging the connection event, stream events, etc to
gain more insight into the problem (both client side logging and
server side).
Similar Messages
-
I have gotten an mp3 of a lecture into my itunes but can't get it onto my ipod nano. I'm on a mac. How do I do this?
Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan -
I added an audio file on to my website, http://www.widescreenonlinereview.com/COMIC-REVIEWS.html. However, the mp3 file stop midway though the song, but the .mp3 file plays completely in the IE Browser.
I tried update Firefox, but I lost some major add-on, which me caused to return to my present Firefox browser, and the .mp3 file still would not play completely in the updates browser either.Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
We have audio books that are converted to mp3 files. They will not play on our 2-year old Ipad. What can I do to make them compatible?
LesHi - what I neglected to include in the question is that the book was uploaded on Google Drive. It sounds like I will need to make the book a playlist and upload it.
Thank you for the response.
Les -
The title more or less says it all. I have Elements 13 & am Using the Panasonic HC 750V. I shot in AVCHD 1080/60p & instead of surround sound choose the directed feature to focus on the voices in front of me. The audio works in preview but not on the timeline. I am also getting Headless errors when working with premiere that pop up in windows but it does not shut down the system.
Any help apprecaited.pc
Have you updated your Premiere Elements 13 to 13.1 using an opened project's Help Menu/Update. If not, please do so.
Just some points of clarification on the AVCHD 1080/60p with which you are having audio problem in Premiere Elements 13.
a. I see no option to record to tape with your Panasonic model. Is there one? if not, what was recorded to, a memory card?
b. When you talk about directed not surround audio, are you saying that your video uses Dolby Digital 2 channel stereo instead of 5.1 channel?
c. Is your AVCHD footage presented to you as AVCHD.mts rather than AVCHD.mp4. I think that is the case if you are referring to Dolby Digital
rather than AAC audio.
Are you saying that you get play back video and audio if you double click the video's thumbnail in Project Assets, but you get video but no audio after you drag the file to the Timeline and play back its contents in the Edit area monitor?
a. Have you checked the Volume control under the Adjust Tab/Adjustments Palette/Volume Panel expanded to make sure the Volume has been taken all the way down? Under that condition, you will get play back in the Preview Window, but no audio from the Timeline level play back in the Edit area monitor.
b. In that same regard, if you look at the Timeline audio clip, note a yellow orange line that runs horizontally across the duration of the audio clip. Is that at the bottom of the frame or is it in the middle or at the top?
Do you work with the Elements Organizer at all? That Headess issue sounds like an Elements Organizer issue. More on that later. That issue should not prevent you from continuing your work. But we will explore that next.
Thanks.
ATR -
Audio pitch / playback speed issue, MacBook Pro 10.4.10
I experienced a very strange audio pitch and speed issue that affected a recording I was making in Ableton Live 6.0.3.
Setup is MacBook Pro 2.16GHz, Mackie Onyx Satellite FW interface for audio, recording straight to internal HD.
I made two multitrack recordings (3-4 tracks each) which played back fine initially within Live. I then rendered the audio to AIFF in order to burn data and audio CDs.
Testing the playback in iTunes, the audio was strangely pitched lower than what we originally recorded. Checking other tracks from my iTunes library, they were playing back FASTER or higher-pitched than normal, and so did audio streamed from MySpace that I was familiar with.
CDs burnt from these AIFFs exhibited the same "lower pitch" / slower playback.
Reopening the Live Set, they were now also playing back lower pitched than what we had heard just minutes beforehand during the recording / mixing.
After I let the computer sleep for a few hours, I came back and checked -- system and internet audio was now playing back at normal speed, but the Live Set was still lower-pitched - the individual WAV files in the set were all pitched lower.
The Live recording prefs were stock standard - set to record 24 bit WAV at 44.1Khz. Since the issue seemed to affect non-Live audio as well, I'm guessing it was something more at the CoreAudio level?
I managed to salvage the session by taking the exported AIFFs into Tracktion 3 and using the pitch change function in the Clip Properties pane. One track was 1.5x off, the other was 1.125x off.
I'm at a complete loss as to why this would happen. It's a first (and hopefully only) occurrence. Has anyone had this happen to them? Could this be some sort of intermittent hardware (clock) glitch? Something to do with 6.0.3 and OS 10.4.10?
I do need to take this MacBook Pro in for servicing - it experienced the "bulging battery" issue and has a partially dead keyboard (the keys near the upper right) - but even with those issues I've not had audio issues like this.In any case, if my Mac had problems, I'd send it in for service....!!!
About your problem, I don't think that it depends on hardware.
I'd check Live configuration and the SR of the audio files: you know, Live has so many features to modify speed and a lot of other parameters that bacomes easy to forget something.
Try recording something with Garage Band so you will be sure if there is a real problem.
cheers
rob -
Virtual host _defaultVHost_ is not available
Hi,
I just installed FMS2 and placed in a dummy sharedBall
application. I can connect to the app once, but every single
connection after that one fails and I see this in the edge.00.log
file:
2006-09-14 17:04:53 26981 (i)2631213 Connection rejected by
server. Reason : Virtual host _defaultVHost_ is not available. -
2006-09-14 17:04:53 26981 (w)2641213 Connection rejected by
server. Reason : [ Server.Reject ] : Virtual host _defaultVHost_ is
not available. -
And then I see this is master.00.log
2006-09-14 17:02:00 26968 (i)2581221 Core (27589) started,
arguments : -adaptor "_defaultRoot_" -vhost "_defaultVHost_" -app
-inst -conf "/usr/local/macromedia/fms/conf/Server.xml" -name
"_defaultRoot_:_defaultVHost_::". -
2006-09-14 17:02:31 26968 (i)2581223 Core (27589) is no
longer active. -
2006-09-14 17:02:31 26968 (w)2581256 Core (27589)
_defaultRoot_:_defaultVHost_:: experienced 1 failure[s]! -
2006-09-14 17:02:31 26968 (i)2581221 Core (27726) started,
arguments : -adaptor "_defaultRoot_" -vhost "_defaultVHost_" -app
-inst -conf "/usr/local/macromedia/fms/conf/Server.xml" -name
"_defaultRoot_:_defaultVHost_::". -
2006-09-14 17:02:31 26968 (i)2581223 Core (27726) is no
longer active. -
2006-09-14 17:02:31 26968 (w)2581256 Core (27726)
_defaultRoot_:_defaultVHost_:: experienced 2 failure[s]! -
2006-09-14 17:02:31 26968 (i)2581223 Core (27589) is no
longer active. -
2006-09-14 17:02:31 26968 (i)2581223 Core (27726) is no
longer active. -
Can anyone shed some light as to why I'm getting these
failures?
Thanks in AdvanceHi,
I sent you an email, maybe it's in your spam box though.
Thanks!Dany
Date: Wed, 4 May 2011 03:03:49 -0600
From: [email protected]
To: [email protected]
Subject: Connection rejected by server
@http://forums.adobe.com/people/Chicohuman , if you are referring to your RTMFP issue that we are discussing on the other forum post, then that is entirely different from this one, because it is FMS 4.0 in your case (FMS 2.0 in this post's case) and its RTMFP in your case (RTMP in this case). Or are you saying you are also finding connection rejects with RTMP as well ?
I would like to know if the original problem of connection rejects are still happening with VHost being unavailable ?
Thank you !
> -
Showmount: new-host: RPC: Program not registered
I always have problem shutting down my solaris system, anytime i issue the shutdown command i always get this error "showmount: new-host: RPC: Program not registered" and the system dows not shutdown instead reboots.
bash-3.00$ su
Password:
# shutdown
Shutdown started. Wednesday, March 5, 2008 12:03:30 PM EST
Broadcast Message from root (pts/3) on new-host Wed Mar 5 12:03:30...
The system new-host will be shut down in 1 minute
showmount: new-host: RPC: Program not registered
Broadcast Message from root (pts/3) on new-host Wed Mar 5 12:04:00...
The system new-host will be shut down in 30 seconds
showmount: new-host: RPC: Program not registered
Do you want to continue? (y or n):I think the shutdown command executes "showmount" as part of its execution process and if the nfs deamon is not running at that time, it produces this error. If you just execute "showmount", you'll see the same problem. Check this page:
http://access1.sun.com/FAQSets/Solarisx86FAQs.html#14
You should execute shutdown with some parameters:
# shutdown -i0 -g0 -y
-y : non-interactive shutdown
-i0 : init state 0 (for shutdown)
-g0 : grace period in seconds (0 for immediate, 60 by default) -
Host command is not working on linux
Hi
I m using linux for application server n windows for client. I need to create folder from client machine by cliking a button of forms10g runtime.HOST command is not working which was working fine in windows.
Any help is appriciateable.
kazi mokaremHi
I had the same issue on linux a few weeks back. What tuned out was, when you install the Oracle app svr it does not include the system paths by default.
The path where mkdir is located may not be visible to the app.
Try to hardcode the path for mkdir as /bin/mkdir .... and seee if that works.
If the above statement works then add that path in the paths variable in default.env file located in $ORACLE_HOME/forms/server directory
HTH
Arvind -
OS 10.4.10 Update Causing Audio Popping (AND HUM) Issues:
OS 10.4.10 Update Causing Audio Popping (AND HUM) Issues:
The problem on my Intel Mac mini with external Klipsch speakers (two mid-range/high and a subwoofer) is REAL obvious as the system emits a hum like a Spinal Tap amplifier turned up to #11 when 10.4.10 powers down the audio circuitry
Then, if I play a song in iTunes, it first pops and the hum disappears right before playing.
Quite annoying. I restored the mini from a recent backup to 10.4.9. Problem gone.
I'm glad I test updates on the mini before applying them to my Intel iMac 24. I guess I'll just hide & watch what happens before doing any more updates.
Here's what I sent to Apple tech support:
Guys/Gals (OS X Engineers):
Concerning the Snap, Crackle Pop Audio problem in the 10.4.10 update:
Please. Just do the right thing and fix the audio.
There is no need to power cycle the audio subsystem to save .0005 amps on the laptop line.
And then to make your Mac mini/iMac/other desktop users have to put up with it when using AC power is ridiculous.
Put the audio subsystem back like it was in 10.4.9 and let the laptop battery freaks looking for mini-amp savings get a "work-a-round".
Crikey!
iMac 2.16 Ghz Intel Core 2 Duo 2GB RAM Mac OS X (10.4.9) 20 Years of Microsoft-Induced Grey Hair
Mac Mini 1.83 Ghz Intel Core Duo 1GB RAM Mac OS X (10.4.9) 20 Years of Microsoft-Induced Grey HairLibby,
Backup is unable to make a restorable by Disk Utility backup. You can restore pieces of the software as outlined in my FAQ about backing up user data:
http://www.macmaps.com/backup.html
But to be able to restore a backup with Disk Utility, you need a cloning utility to have made the backup.
I suggest starting a new thread here, where someone else could help you out better:
http://discussions.apple.com/forum.jspa?forumID=752&start=0
First off, you'll get a wider audience who may be able to solve your problem. Secondly, responses to you won't confuse the original poster with solutions that don't apply to them. And thirdly, you'll know for certain whether or not a response applies to you. -
I am trying to save a mp3 file but firefox does not allow me to save it...it allows me to play the file but not download and asave it to my computer. How do I enable Firefox to save mp3 files on my computer?
Go to Options>Applications tab > search MPEG Layer 3 audio(audio/mpeg) > use "Save File" option on drop down menu.
-
I get a pop-up message saying "A server with the specified host name could not be found", whenever I try to access any streaming websites/apps or even WhatApp over Wi-Fi and I cannot access the specific THING for that moment, and I've tried switching Wi-Fi On and Off both in my Phone and also in the Router. I got an internet connection and a Wi-Fi router just before two days, and it's happening since. I got the internet speed around 80kbps and i can easily stream YouTube videos except sometimes, I receive that annoying message. I can't even browse the internet in Safari, which says "No Internet Connection"(Even though the Wi-Fi is connected), and I can access it after somewhile (say 10 minutes, it'll be perfectly alright). I use iPhone 4s. And everything about the internet connection is totally fine in my Computer, but not in my iPhone, as I've explained the issues, above. If there are any technical settings that I should change/modify, either on my computer(Windows 7 OS) or in my iPhone(iOS 7.0.4), PLEASE let me know
I hope I've provided enough information for the reader to understand my point. (I apologize for my verbal mistakes, if there are )
THANKSHello Paneesh,
Thank you for the details of the issue you are experiencing with Wi-Fi on your iPhone 4s. I recommend the following steps:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
If the issue is still unresolved Wi-Fi disconnects or signal strength is less than expected
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
You can find the full article here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Security issue - or not? (remote trigger SMC startup)
Hi,
During installation of a few zones on a Sol10U2 system today, I noticed that simply running an nmap scan on a freshly installed and booted zone would cause the SMC to start:
Starting Solaris Management Console server version 2.1.0.
endpoint created: :898
Adding instance of solaris_providerpath
Adding class Solaris_LocalFileSystem
Adding class Solaris_Directory
Adding class Solaris_Mount
Adding class Solaris_UFS
Adding class Solaris_HSFS
Adding class Solaris_UFSMount
Adding class Solaris_HSFSMount
Adding class Solaris_LocalFSResidesOnExtent
Compilation succeeded.
Adding class Solaris_DiskDrive
Adding class Solaris_DiskPartition
Adding class Solaris_MediaPresent
Adding class Solaris_LogicalDisk
Adding class Solaris_PhysicalMedia
Adding class Solaris_Disk
Adding class Solaris_PhysicalPackage
Adding class Solaris_RealizesExtent
Adding class Solaris_RealizesDiskPartition
Adding class Solaris_RealizesDiskDrive
Adding class Solaris_DiskPartitionBasedOnDisk
Adding class Solaris_DiskPartitionBasedOnFDisk
Adding class Solaris_SCSIController
Adding class Solaris_IDEController
Adding class Solaris_MPXIOController
Adding class Solaris_USBSCSIController
Adding class Solaris_GenericController
Adding class Solaris_SCSIInterface
Adding class Solaris_MPXIOInterface
Adding class Solaris_IDEInterface
Adding class Solaris_ExtraCapacityGroup
Adding class Solaris_MPXIOGroup
Adding class Solaris_ControllerLogicalIdentity
Adding class Solaris_MPXIOCtrlrLogicalIdentity
Adding class Solaris_ControllerComponent
Adding class Solaris_MPXIOComponent
Adding class Solaris_StorageLibrary
Compilation succeeded.
Adding class CIM_ManagedElement
Adding class CIM_SettingData
Adding class CIM_Share
Adding class CIM_FileShare
Adding class CIM_NFSShare
Adding class CIM_SharedElement
Adding class CIM_HostedShare
Compilation succeeded.
Adding class Solaris_NFSShare
Adding class Solaris_NFSShareSecurity
Adding class Solaris_NFS
Adding class Solaris_PersistentShare
Adding class Solaris_MountSetting
Adding class Solaris_NFSMountSetting
Adding class Solaris_ShareSetting
Adding class Solaris_NFSShareSetting
Adding class Solaris_ShareService
Adding class Solaris_MountService
Adding class Solaris_NFSMount
Adding class Solaris_NFSShareSecurityModes
Adding class Solaris_NFSShareDefSecurityMode
Adding class Solaris_HostedShare
Adding class Solaris_PersistentShareConfiguration
Adding class Solaris_PersistentShareForSystem
Adding class Solaris_NFSShareEntry
Adding class Solaris_SharedElement
Adding class Solaris_NFSExport
Adding class Solaris_SharedFileSystem
Compilation succeeded.
Adding instance of solaris_providerpath
Adding instance of solaris_providerpath
Adding class Solaris_VMStateDatabase
Adding class Solaris_VMSoftPartition
Adding class Solaris_VMExtent
Adding class Solaris_VMStripe
Adding class Solaris_VMConcat
Adding class Solaris_VMMirror
Adding class Solaris_VMRaid5
Adding class Solaris_VMTrans
Adding class Solaris_VMHotSparePool
Adding class Solaris_VMDiskSet
Adding class Solaris_VMStorageVolume
Adding class Solaris_VMConcatComponent
Adding class Solaris_VMDriveInDiskSet
Adding class Solaris_VMExtentBasedOn
Adding class Solaris_VMSoftPartComponent
Adding class Solaris_VMExtentInDiskSet
Adding class Solaris_VMHostInDiskSet
Adding class Solaris_VMHotSpareInUse
Adding class Solaris_VMHotSpares
Adding class Solaris_VMMirrorSubmirrors
Adding class Solaris_VMRaid5Component
Adding class Solaris_VMStatistics
Adding class Solaris_VMStripeComponent
Adding class Solaris_VMTransLog
Adding class Solaris_VMTransMaster
Adding class Solaris_VMUsesHotSparePool
Adding class Solaris_VMVolumeBasedOn
Adding class Solaris_DiskIOPerformanceMonitor
Compilation succeeded.
Adding instance of solaris_providerpath
Adding class Solaris_ActiveUser
Adding class Solaris_ActiveProject
Adding class Solaris_ProcessStatisticalInformation
Adding class Solaris_UserProcessAggregateStatisticalInformation
Adding class Solaris_ProjectProcessAggregateStatisticalInformation
Adding class Solaris_ProcessStatistics
Adding class Solaris_ActiveUserProcessAggregateStatistics
Adding class Solaris_ActiveProjectProcessAggregateStatistics
Compilation succeeded.
Registration setup: 8/8 (Executing SUNWpmgr_reg.sh)
Registering components: 64/64 (Registering PatchMgrCli.jar) er)
Solaris Management Console server is ready.For interest, the nmap result is:
toby@deepthought ~ $ nmap -v 192.168.1.122
Starting Nmap 4.01 ( http://www.insecure.org/nmap/ ) at 2006-08-29 20:39 EDT
DNS resolution of 1 IPs took 0.23s. Mode: Async [#: 2, OK: 0, NX: 1, DR: 0, SF: 0, TR: 1, CN: 0]
Initiating Connect() Scan against 192.168.1.122 [1672 ports] at 20:39
The Connect() Scan took 44.49s to scan 1672 total ports.
Host 192.168.1.122 appears to be up ... good.
Interesting ports on 192.168.1.122:
(The 1662 ports scanned but not shown below are in state: closed)
PORT STATE SERVICE
21/tcp open ftp
22/tcp open ssh
23/tcp open telnet
79/tcp open finger
111/tcp open rpcbind
513/tcp open login
514/tcp open shell
898/tcp open sun-manageconsole
4045/tcp open lockd
7100/tcp open font-service
Nmap finished: 1 IP address (1 host up) scanned in 44.874 seconds(port 7100 is actually a non-standard VNC server which was carried over from the global zone)
Of course, this is immediately before running Solaris Security Toolkit (jass) to apply a secure profile.
Does it matter that this SMC startup can be triggered so easily remotely?It just struck me odd that simply port-scanning the
machine could produce this behaviour, and I wonder if
it might be a security issue.Probably not directly. Sun has distributed several items in the past that launch via inetd connections (calendar manager and font server were two common ones). Just because it launches doesn't mean it's a security problem. The application itself may require authentication after running.
Of course the resources required by the process may be non-trivial, and the application may have security issues, but the fact that it launches isn't a direct indication of a problem.
Darren -
Constant Resolving Host Issues
I have had a good service until recently but now Constant Resolving Host Issues. Pages slow to load making it difficult to use.
HH3 Software version 4.7.5.1.83.8.94.1.37 (Type A)
I have factory reset hub and tried opendns and Google DNS.
Can anyone help?
KeithHi cookiesandjava
Sounds stange I'll be happy to have a look over your connection stats and see if there is anything out of place.
Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Making MP3 CDs (and issues with AAC files)
Hello All,
I like to burn MP3 CDs so I can play several hours worth of tunes while riding my motorcycle or in the car. I have a large collection of songs that I purchased from the iTunes store. When I burn a CD my choices are Audio, MP3 or Data. The AAC (earlier versions are protected and recent purchases are purchased AAC) won't work cause they are not MP3 files and iTunes won't allow me to make an MP3 copy. The latter only seems to work if I ripped a song from CD to AAC format. Any suggestions? I believe my CD player will also play AAC files. How can I either create a mix of MP3 and AAC files on a CD or convert purchased AAC files to MP3. Thanks for your help!To create an MP3 CD in iTunes, you need to have a playlist of songs that are already in MP3 format. If you need to convert AAC files to MP3, simply follow these instructions: http://support.apple.com/kb/HT1550
Note that format conversion creates a new file in MP3 format, but does not replace the file in any playlist. Make sure that the playlist you are going to burn has only MP3s in it. The best way to check is by looking at the Kind column. If Kind is not visible, enable it by going to View > View Options.
Maybe you are looking for
-
I'm trying to install the 64 and 32 bit driver for the HP laserjet 1525 printer on a server. I can get to the page where the download is found, I extract the files and put them on the desktop of the server. When I go through the wizard in windows ser
-
HP OfficeJet J6410 won't install under Windows 8 & Windows 8.1
Recently I made a posting about installing the HP OfficeJet J6410 printer on my daughter's new HP laptop. Please, before answering my question, I would like to point out to two earlier postings from me. 1. The first posting. Around april this year (2
-
Sles poa not listening on default ports
we dbcopied the domain and post office from netware 6.5.8 to sles 10 spk2, gw7.0.3. installed mta, poa and gwia... the poa starts but is not listening on ports 1677, 7181 or 7101 all default ports. all 3 agents are running on the host... these ports
-
How To Integrate BPEL Process Into Oracle Weblogic Portal 10.3
Hi All, I have bpel process which which has db adapters and Human Work Flow. I need to integrate this bpel process [ created using Oracle SOA Suite 10131] with Oralce weblogic portal 10.3 Please let me know how to achieve this. Thanks, Irfan Khan
-
I have an emac running 10.2.8, two users, when i sign in and try to open a word document from the desktop a window opens and says i can not open the document because it's in use by another user. I created this document and the other user has not sign