FMS does not start (windows 7)

FMS does not start in win 7.
There were some starts but only when first run after the installation. (i checked it 3 times) After the computer reboot, FMS does not start. Whats the problemm ? And one more quastion: where can i find server address ?

Do you see the FMS and FMSAdmin services running in your machine?
Is your concern that FMS does not start by itself after restarting your machine? Or your were not able to start FMS.
To connect to your server using Administration Console, Enter your server name or IP in "Server Address' text box.
Regards,
Janaki L

Similar Messages

Does not start windows and just show me the HP System recovery window

Hello,
I have a HP G60-445DX Notebook PC. When I start the PC just open the Recovery Manager and does not open windows.
I have an upgrated Windows Vista to Windows 7 version and do not have any installation CD just the ones which were send for the upgrade (HP Upgrade Manager and Windows 7 Home Premium Upgrade Media).
I do not want to run the System Recovery since I need to recover some files. How can I run windows? I do not have any installation CD and if I need which one Vista or Windows 7? Could you please advise me?
Thank you for your help!

Hi,

Acrobat Pro X 10.1.10 Does Not Start Windows 8.1

I have Create Suite CS6 which apparently bundles Adobe Acrobat Pro X. I have upgraded to 10.1.10. Under Window 8.1, this version simply does not start. There is no startup screen. There is no error in EventViewer of Windows. It simply does NOTHING.
I went to Windows Program and Features and did a "Repair" on Acrobat Pro X. This redid the install but the result is the same.
Is there a known compatibility issue here? How do I work around this?

Hello,
Have you tried to run the Acrofix patch on your computer?
If not, please follow this link, http://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days.html
Regards,
Yuvraj.

GoldenGate Manager Does not start - Windows 7 64-bit, 11gR1 database

Hi Experts,
I ran into very tricky situation and seeking for clarification and if possible solution for the same, here how it goes: (This is a practice setup for my knowledge and not production)
My environement:
GGSCI (msheth-work) 18> versions
Operating System:
Version 6.1 (Build 7601: Service Pack 1)
Database:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
I have two database installed called gg1, gg2 on the same local system.
I have two goldengate installation at following location: C:\gg1 , C:\gg2
I was successfully able to start Manager, Extract and Replicate process with out creating windows services for manager.
I read in discussion forum that it is recommneded to have different manager name and create services for them if you have multiple Goldengate installation in the same system. (Oracle Golden Gate installation
Now when I create services using INSTALL ADDSERVICE ADDEVENTS, manager process does not start and manager report log and event viewer from windows shows following error despite of providing correct login details in manager parameter file:
2012-08-23 10:42:31 ERROR OGG-00664 Oracle GoldenGate Manager for Oracle, mgr.prm: OCI Error beginning session (status = 1017-ORA-01017: invalid username/password; logon denied).
GGSCI (hostname) 19> DBLOGIN USERID ggs_owner, PASSWORD ggs_owner
Successfully logged into database.
Manager Parameter File:
PORT 7810
USERID ggs_owner, PASSWORD ggs_owner
PURGEOLDEXTRACTS C:\gg2\dirdat\ex, USECHECKPOINTS
Your explaination and help will be highly appreciated.
Regards,
Mitul Sheth
Edited by: 954634 on Aug 23, 2012 11:46 AM

Thanks all of you to responding to my post, although I have bad news that I tried everything but it did not work. let me show you what all I have done:
1) Adding windows services for manager
GGSCI (msheth-work) 4> edit params ./globals
MGRSERVNAME MGR1
GGSCI (msheth-work) 5> exit
c:\gg1>install addservice addevents
Oracle GoldenGate messages installed successfully.
Service 'MGR1' created.
Install program terminated normally.
When I try to start manager service either from GGSCI or from services.msc it gives same login error as mentioned earlier in the post.
2) Using tnsnames while login into database:
GGSCI (msheth-work) 1> edit params mgr
PORT 7809
USERID ggs_owner@gg1, PASSWORD ggs_owner
PURGEOLDEXTRACTS C:\gg1\dirdat\ex, USECHECKPOINTS
Just to make sure username and password is fine I login into database using GGSCI command prompt as follows:
GGSCI (msheth-work) 4> dblogin userid ggs_owner@gg1, password ggs_owner
Successfully logged into database.
Hence, after making sure on all your suggestion I could not get it started and still situation is the same. I would need manager login into database becuase I have implemented DDL replication.
Also, just by removing manager service from windows, same configuration without any change works like a charm. It just that for evey goldengate process a new window is create and it can't be closed. (If closed process dies).

Lightroom cc does not start windows 8.1

updated lightroom cc (6) on windows 8.1. Now lightroom does not start. nothing happens when I open it???

Hi,
After installing lightroom CC you need to log out from the Creative Cloud and once again Sign in.
Do this by:
Preferences>Account>Log out from the Creative Cloud.
Let me know if worked.

Satellite C660D froze and does not start - Windows failed to start

Ok pretty much the most dense person you will ever likely to meet when it comes to things like this. but will try my best to explain.
Couple of days ago my laptop froze on me resulting on me having to turn it off and start it again by the power button. When I started it again the message below appeared.
WINDOWS ERROR RECOVERY
Windows failed to start . A recent hardware or software change might be the cause.
If windows files have been damaged or configured in incorrectly, start up repair can help and diagnose the problem, if power was interrupted during start up, choose start windows normally.
-Launch Start up repair (recommended)
-Start windows normally
When I press Launch Start up repair it goes to a screen with a big cursor (which you can move around) but nothing else happens.
When I pressed on the start windows normally setting it went through to the windows logo whilst starting up but then stalls at this point.
My question is, is it easy to fix & if not where is the best place to take it to get fixed. Said I was pretty dense :p
Thanks for looking
Dean

>My question is, is it easy to fix & if not where is the best place to take it to get fixed. Said I was pretty dense
I think its easy to fix but you would need an Toshiba Recovery disk.
Did you create one in the past?
If not, try to start the HDD recovery: power up the unit, press F8. Now choose Repair my Computer.
Now new Window should open and here you should choose Toshiba HDD recovery option. This would set the notebook back to factory settings.
In case this isnt possible, you would need to boot from a recovery disk to reinstall the system.

Tecra A2 does not start Windows

My Tecra A2 has suddenly stop starting windows.
I get the "We apologize for the inconvenience....." screen that says Windows had to shut down unexpectedly and asked to choose how I want to start (Safe Boot, Las known settings, Normally etc)
When I choose any of these the Win XP Start screen comes up for a while, then the PC restarts and the "We apologise for the inconvenience....."screen comes up again.
Any ideas how to fix/troubleshoot this??

> I do not have a MS WIN XP disc so I tried the Toshiba Recovery Disc. I could not find CHKDSK on the CD but it did do some kind of recovery process. Is this the same thing?
The repair console is available ONLY on original MS Win XP disk and not on the recovery disk.
> Any further suggestions? Is there any way of checking the hardware? I think this may be a HDD problem, but it would be nice to get confirmation
I agree with you it could be a HDD issue
You could check the HDD using a tool called Drive Fitness Test.
Check this page
http://www.hitachigst.com/hdd/support/download.htm

Itunes does not start windows xp

all of the sudden my I-tunes does not open. have downloaded new version, etc. and still won't open

Do you get an error message when you try to install iTunes? If so, what does it say? (Precise text, please.)

HP Pavilion 15-n253sv Notebook Computer does not start (Windows 8)

Hello, yesterday my laptop shut down and since then it cannot start.
Even with repair/install disks of windows (8.1) or Linux, it recognises the disk, gets to the first menu (of the Linux disk) or the press any key to boot from cd/dvd (on windows disk) but then it get to a blank screen and does nothing else.
I run the System tests (quick and extensive) and both found (pretty quickly I might add) an error on the HDD (I think).
the error Id istrk03-74j79q-mfpv6j-60wc03 but I cannot find any reference of that on the web.
I suppose that since it is a hardware issue I will have to take it to HP support, the main thing that concerns me (as you might have already guested) is if I might lose any files.
Thank you in advance
Orestes

Yes, I just took it to a service support and they told me just that, if I want to keep my files I would have to pay extra.
The live cd solution was my first thought too but (as I wrote at my original post) it doesn't seem to be hopeful either.
It gets to the first stage of the disks (boot menu of linux live disk/press any key to boot from disk on the windows disk) and then it gets to blank screen doing nothing as well, also the optical drive stopped reading the disk (that is how I figure that's doing nothing). :-(
Anyway thank you for your good will but I suppose I would have to pay for the recovery if I do not want to void my warranty.
PS:By the way and since you mentioned it, the issue with the bootable disks can it be connected with the hard disk failure?

SAProuter does not start, Windows Server 2008 64

I cannot get SAProuter to start on a Windows Server 2008 64-bit server. I used the following version of SAProuter:
SAPROUTER 7.10 - Windows Server on x64 64bit
- I was able to add the service correctly using the following command:
ntscmgr install saprouter -b <drive>:\usr\sap\saprouter\saprouter.exe -p "service -S <port> -r"
- I configured the service to logon as the <system number>adm account.
When I try to start the service I receive the following error:
The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail.
When I check the Application event log I see the following error:
Activation context generation failed for "f:\usr\sap\saprouter\saprouter.exe". Dependent Assembly Microsoft.VC80.CRT,processorArchitecture="amd64",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4053" could not be found. Please use sxstrace.exe for detailed diagnosis.
What is the issue?
Edited by: Jeff Kinard on Jul 14, 2010 1:21 AM

Hi,
Wrong forum I reckon!
Anyway probably you need to check out SAP Note 1375494, most likely that you need to apply the the MS patch mentioned in the note & the attached PDF
Regards
Chris

Not Starting - Windows xp

When I switch on the laptop blank screen appears.
I tried to enter by giving f10 but screen appears bank.
Plz gig me suggestion to switch on my laptop.

Hi AntonyJeni,
Welcome to the HP Support Forums!
I would like to be able to assist you with hopefully getting your computer to start again! The troubleshooting steps that you will need to follow in hopes of bringing your computer back to life are in the following link Computer Does not Start (Windows 7, Vista, XP). The symptom that you will want to click on is LED lights do not glow, display is black, computer does not start.
Please let me know the outcome of the troubleshooting steps.
Looking forward to your response!
I worked on behalf of HP

WebAnalysis does not start after workspace is set on Windows Authentication

I've used [doc Hyperion System 9.3.x Configuring the BI+ Workspace for Single Sign-On (SSO) with Internet Information Services (IIS) [ID 1100096.1] to configure SSO for workspace users. It works fine. Though since then the WA service does not start anymore. The error message which is raised sounds very very familar but still I am not able to tackle it. The message in the log or the analysis console is "[WARN] [STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.analyzer.utils.general.HYAUtil - Wait for workspace [
[WARN] Timer-2 com.hyperion.analyzer.utils.general.HYAUtil - ."
I am very sure it had something to do with rights/ permissions, but also after playing around with IIS and ntfs permissions for hours I can't get SSO en WA both working at the same time.
As soon as I set my workspace aplication in IIS on windows integrated, the SSO is working but as soon as a I restart the WA service it fails to start. When I set the workspace application IIS on anonymous the WA service start fine but then the SSO is not working anymore.
It drives me crazy.
Hopefully its a small matter for you to solve!
Thanks in advance.

Dont know exactly whats happened but I presume something went wrong during the update procedure.
If you will be not able to start the notebook in the safe mode or to boot the notebook then user the Toshiba recovery CD to gets the notebook working!

Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I d

Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I do have it listed in my Firewall as an exception program with Permit All. What is happening?
== This happened ==
Every time Firefox opened
== After removing Firefox and Reinstalling it. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; MS-RTC LM 8)

If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See also [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]

PE 9 does not start on Windows 7 Ultimate 32 bit

No matter how I try to start PE 9, it does not start.
From Welcome Screen -> New Project: nothing happens. Form Elements Organizer -> File - New - Premiere Elements Video project it takes some time loading all modules, libraries and sorts of things until an error message appears saying that PE 9 does not function anymore.
That's all, no error log or something like this. Please let me know what info is needed.
PS: Why does my cursor jump to the beginning when I press enter in text editor here?

Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various
parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle...
this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video
editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708?tstart=0 for more) with Windows
(or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on
drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in
the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the
type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208?tstart=0 and Jim Simon in the Premiere Pro forum
http://forums.adobe.com/thread/856433?tstart=0 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but
eSata DOES have a fast enough data transfer for video editing... I have not used this eSata Dock... for reference only, YMMV and all the usual
disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

Photoshop 32bits does not start up anymore on Windows 7 64bits.

This is the situation:
We have 2 PCs that have been configured identically, with the exception of a scanner (canonScan 9950F) attached to the computer and the 32 bits twain scanner driver installed.
Both PCs worked correctly, the one with the scanner attached started 32 bit PhotoShop when there was need to scan. But for some obscure reason, 32 bits Photoshop does not work anymore. I have tried disabling the twain driver (by moving it out of the plugins directory), restarting the machine, updating to the latest software, but despite this, Photoshop does not start anymore... no beep, no crash, no nothing.
I deinstalled Photoshop, Reinstalled - same phenomena.
At least the Event Viewer of Windows has something to tell, even if it is not quite understandable to me:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2011-07-04T15:39:45.000000000Z
EventRecordID
8452
Channel
Application
Computer
pwlu0w977.paulwurth.agn
Security
EventData
Photoshop.exe
12.0.0.0
4bbc56b6
Photoshop.exe
12.0.0.0
4bbc56b6
c0000006
00e8beff
12b4
01cc3a608276fe50
C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Photoshop.exe
C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Photoshop.exe
d70b772e-a653-11e0-b8c6-6431503f59b8
May be someone out in the user community has a solution? Needless to say, that the second machine works fine!
Lucien.

The Photoshop executable really should be showing 12.0.4.0 as the executable version should have been updated by the updater.
I'm sorry for the really basic question, but did you reboot after installing the 12.0.4 update?
I do vaguely remember a few forum posts claiming the updater had only worked partially, though in my own case it updated all the files no problem. Can you recall whether you changed anything under the Photoshop 32 bit installation area (e.g., did you move or remove any of the Adobe plug-ins, for example)?
If memory serves, the workaround for a "partial update" was to uninstall Photoshop, then reinstall 12.0.0, then update to 12.0.4.
-Noel

FMS does not start (windows 7)

Similar Messages

Maybe you are looking for