FMS on linux

hello,
i recently installed FMS on my centos, but actually i am having difficult to start the server.
#Fields: date   time    x-pid   x-status        x-ctx   x-comment
2012-04-18      18:58:25        2513    (i)2581173      FMS detected IPv6 protocol stack!       -
2012-04-18      18:58:25        2513    (i)2581173      FMS config <NetworkingIPv6 enable=false>        -
2012-04-18      18:58:25        2513    (i)2581173      FMS running in IPv4 protocol stack mode!        -
2012-04-18      18:58:25        2513    (i)2581173      Host: PTY11222C.FortaTrust.com IPv4: 127.0.0.1  -
2012-04-18      18:58:25        2513    (e)2631013      Failed to create listener for adaptor _defaultRoot_, IP localhost, port 19350: TCCommBridge::createListener 0.0.0.0:65535/other: create socket failed.. -
2012-04-18      18:58:25        2513    (e)2631013      Failed to create listener for adaptor _defaultRoot_, IP , port 80: TCCommBridge::createListener 0.0.0.0:80/v4: bind failed!!!.  -
2012-04-18      18:58:25        2513    (e)2631114      Failed to start listeners for adaptor _defaultRoot__edge1.      -
2012-04-18      18:58:25        2513    (e)2791225      Failed to start edge : _defaultRoot__edge1      -
~

ctive Internet connections (only servers)
Proto Recv-Q Send-Q Local Address               Foreign Address             Stat                                                                             e
tcp        0      0 0.0.0.0:3306                0.0.0.0:*                   LIST                                                                             EN
tcp        0      0 0.0.0.0:111                 0.0.0.0:*                   LIST                                                                             EN
tcp        0      0 0.0.0.0:10000               0.0.0.0:*                   LIST                                                                             EN
tcp        0      0 0.0.0.0:22                  0.0.0.0:*                   LIST                                                                             EN
tcp        0      0 127.0.0.1:631               0.0.0.0:*                   LIST                                                                             EN
tcp        0      0 127.0.0.1:25                0.0.0.0:*                   LIST                                                                             EN
tcp        0      0 0.0.0.0:989                 0.0.0.0:*                   LIST                                                                             EN
tcp        0      0 :::80                       :::*                        LIST                                                                             EN
tcp        0      0 :::22                       :::*                        LIST                                                                             EN
tcp        0      0 ::1:631                     :::*                        LIST                                                                             EN
udp        0      0 0.0.0.0:10000               0.0.0.0:*                                                                                                    
udp        0      0 0.0.0.0:44102               0.0.0.0:*                                                                                                    
udp        0      0 0.0.0.0:983                 0.0.0.0:*                                                                                                    
udp        0      0 0.0.0.0:986                 0.0.0.0:*                                                                                                    
udp        0      0 0.0.0.0:5353                0.0.0.0:*                                                                                                    
udp        0      0 0.0.0.0:111                 0.0.0.0:*                                                                                                    
udp        0      0 0.0.0.0:631                 0.0.0.0:*                                                                                                    
udp        0      0 :::5353                     :::*                                                                                                         
udp        0      0 :::33517                    :::*                                                                                                         
Active UNIX domain sockets (only servers)
Proto RefCnt Flags       Type       State         I-Node Path
unix  2      [ ACC ]     STREAM     LISTENING     6357   /var/run/cups/cups.sock
unix  2      [ ACC ]     STREAM     LISTENING     5975   /var/run/sdp
unix  2      [ ACC ]     STREAM     LISTENING     5897   /var/run/dbus/system_bu                                                                              s_socket
unix  2      [ ACC ]     STREAM     LISTENING     4875   @ISCSIADM_ABSTRACT_NAME                                                                              SPACE
unix  2      [ ACC ]     STREAM     LISTENING     6074   /var/run/pcscd.comm
unix  2      [ ACC ]     STREAM     LISTENING     6107   /var/run/acpid.socket
unix  2      [ ACC ]     STREAM     LISTENING     8267   @/tmp/fam-root-
unix  2      [ ACC ]     STREAM     LISTENING     6995   @/var/run/hald/dbus-npD                                                                              xcfuB7D
unix  2      [ ACC ]     STREAM     LISTENING     100330 /var/lib/mysql/mysql.so                                                                              ck
unix  2      [ ACC ]     STREAM     LISTENING     4858   @ISCSID_UIP_ABSTRACT_NA                                                                              MESPACE
unix  2      [ ACC ]     STREAM     LISTENING     6996   @/var/run/hald/dbus-m3x                                                                              H5OA4cR
unix  2      [ ACC ]     STREAM     LISTENING     6949   /var/run/avahi-daemon/s                                                                              ocket
unix  2      [ ACC ]     STREAM     LISTENING     6815   /dev/gpmctl
unix  2      [ ACC ]     STREAM     LISTENING     5303   /var/run/audispd_events

Similar Messages

  • FMS on linux (RH) clusters?

    I want to expand service to my cluster of rh (enterprise 5.2)
    with 2 nodes. Anyone has experiences? or any infos for reading.
    Thanks.

    We had to create a streams directory beneath our application
    on Linux, this might be because of our strict security model but
    might also apply to your case.
    we let streams save in individual instance-directories like:
    /opt/macromedia/fms/applications/<appname>/streams/<instancename>/
    This behaviour can be changed with the StorageDir tag in your
    Application.xml configuration file.

  • Installing FMS on Linux

    Hi
    I am having an issue on starting the FMS server . I could be able to install the server but when I try to start it  says , "Error: Flash Media Server needs the NSPR library installed."  So I checked the server and all the libraries are already installed .
    I have installed the FMS at the default server . i.e  /opt/adobe/fms and the relevant libraries are as follows
    /usr/lib64/libnspr4.so
    /usr/lib64/libplc4.so
    /usr/lib64/libplds4.so
    I am really stuck with this issue . Pls advise

    hi
    This is Redhat SE 4.  Further I symlinked   all the NSPR libraries to shared library path  accrodingly . But it still shows up this error . (Error: Flash Media Server needs the NSPR library installed.)
    May be FMS expects these libraries somewhere else or does it support 64 bit libraries ?
    thanks

  • FMS2 on Linux almost working!

    Hi there,
    I've been testing FMS2 on Linux (CentOS). I figured that
    since CentOS is in essence RedHat that I shouldn't have any
    trouble. The good news is that it all seems to have installed
    nicely. When I attempt a ./fmsmgr list it gives me a couple
    processes that are running and everything. I can even login to the
    administrative system. The issue is rtmp service over 1935 isn't
    responding. I attempted to connect with a simple application I
    wrote but it constantly fails.
    So I checked the logs and I'm basically getting this:
    Apr 28 09:20:04 as 257[25875]: Server stopped .
    Apr 28 09:20:44 as 257[4028]: Server starting...
    Apr 28 09:20:44 as Server[4028]: No primary license key
    found. Switching to Developer Edition.
    Apr 28 09:20:44 as Server[4042]: No primary license key
    found. Switching to Developer Edition.
    Apr 28 09:20:44 as 257[4028]: Server started
    (/opt/macromedia/fms/conf/Server.xml).
    Apr 28 09:20:44 as Server[4045]: No primary license key
    found. Switching to Developer Edition.
    Apr 28 09:20:44 as Adaptor[4042]: Listener started (
    _defaultRoot__edge1 ) : 19350
    Apr 28 09:20:45 as Adaptor[4042]: Failed to create thread
    (TCAsyncIO::init).
    Apr 28 09:20:45 as Adaptor[4042]: Failed to create thread
    (TCProtocolAdaptor::startListenerThread).
    Apr 28 09:20:45 as Adaptor[4042]: Failed to start listeners
    for adaptor _defaultRoot__edge1.
    Apr 28 09:20:45 as 257[4042]: Server aborted.
    Apr 28 09:20:49 as Server[5379]: No primary license key
    found. Switching to Developer Edition.
    Apr 28 09:20:49 as Adaptor[5379]: Listener started (
    _defaultRoot__edge1 ) : 19350
    Apr 28 09:20:50 as Adaptor[5379]: Failed to create thread
    (TCAsyncIO::init).
    Apr 28 09:20:50 as Adaptor[5379]: Failed to create thread
    (TCProtocolAdaptor::startListenerThread).
    Apr 28 09:20:50 as Adaptor[5379]: Failed to start listeners
    for adaptor _defaultRoot__edge1.
    Apr 28 09:20:50 as 257[5379]: Server aborted.
    I can start, restart the service and do everything without
    harm. But it seems as if the server itself is failing when it's
    initialized despite admin and other services running perfectly.
    I'm wondering if I need to do something to Adaptor.xml or
    Vhost.xml. This is a fresh setup and I haven't touched/configured
    anything. I'm not sure if I should be tweaking the
    configuration...assignging any IP addresses etc.
    Also you sould know that this is a shared host with multiple
    domains on the same system. So I'm not sure if that will effect it
    at all.
    Your help is greatly appreciated, I really want to see this
    working on Linux,
    David

    Try:
    /opt/macromedia/fms/fmsmaster
    If you see and error about libnspr4.so you'll need to install
    some more RPMs. You can find my notes on installing FMS on linux
    at:
    http://renaun.com/blog/2006/11/10/149/
    http://renaun.com/blog/2006/03/18/20/

  • FMS Goes Non Responsive

    It seems every couple of days, our FMS (latest version) goes
    non responsive. By this I mean, the connections on the RMTP/HTTP
    ports fail. (verified using
    http://www.404404.com/flashcomporttest/)
    We're using nothing more than the sample guestbook
    application, and find that after a couple of days, we don't get
    playback.. and have to restart the fms. Once we restart, the sample
    guestbook app works fine again. We're running the FMS on linux. Has
    anyone else had this problem?

    I seem to rememer a problem like this in FMS 2.0, with a
    bugfix issued in the 2.0.1 update. Have you updated to the latest
    version of FMS?

  • Can't download developer edition

    I can't download FMS DE Linux Version. Windows version starts
    downloading instead (the Flashmedia3_5_Int_Strm_ALP file). Help
    required urgent! Thanks in advance.

    Are you downloading from
    http://www.adobe.com/support/coldfusion/downloads.html
    You need to provide the Adobe login details to download.
    Thanks
    Sankalan
    (www.mindfiresolutions.com)

  • Optimum Configuration

    I am going to dedicate a server to FMS. I plan to have as
    many as 10,000 connections. Does FMS in linux take advantage of
    dual processors? Memory? Disk Space? I won't have sophisticated
    applications nor am I doing media streaming. This is purely for
    socket/shared object use. I'd liek to know if 4GB of memory helps
    over 2GB. Is a large amoutn of disk space required and does dual
    processors help.
    Also, from what I understand, I only need ports 1935 and 80
    open correct?
    Thanks!

    Well I'd say if you have 10,000 connections then no thats not
    enough hardware to support all those users and you should consider
    using a hosting provider instead.

  • FMS 2 on Suse Linux  9.1 - Rootserver

    Hi,
    i installed the Flash Server 2.0.1 developer version on my
    Suse Linux 9.1 Root Server.
    I can't loggin to the FlashServer Management Console
    Interface
    What exactly i need type in to the "Server Adress" Field?
    I tried ServerIp:PortNr and ServerHostName:PortNr --> I
    use 1111 as PortNr
    I think the service doesn't start.
    If i type this command:
    ./fmsmgr adminserver start
    i get:
    Admin server:fmsadmin command:start
    Starting Macromedia Flash Media Admin Server (please check
    /var/log/messages)
    if stop with
    ./fmsmgr adminserver stop
    i get:
    Admin server:fmsadmin command:stop
    Stopping Macromedia Flash Media Admin Server (please check
    /var/log/messages)
    fmsadmin: no process killed
    Admin Server has shutdown...
    ./shmrd: error while loading shared libraries: libnspr4.so:
    cannot open shared object file: No such file or directory
    if i type:
    ./fmsmgr list
    i get:
    Macromedia Flash Media Server services:
    fms
    Macromedia Flash Media Server running services:
    Processes for service "fms" in directory:
    /srv/www/htdocs/web1/html/stream/fms
    ** no server process **
    ** no administration server process **
    MY Admin Name and Password 100% correctly.
    After reinstallation i get this Message:
    Installing Macromedia Flash Media Server files...
    Configuring Macromedia Flash Media Server...
    Adding "fms" service.
    Setting default admin to "fms".
    fms 0:off 1:off 2:off 3:on 4:off 5:on 6:off
    Setting autostart for "fms".
    Server:fms command:start
    NPTL 0.61
    Starting Macromedia Flash Media Server (please check
    /var/log/messages)
    Admin server:fmsadmin command:start
    Starting Macromedia Flash Media Admin Server (please check
    /var/log/messages)
    The Macromedia Flash Media Server installation is complete.
    My questions:
    1. How can i check out over SSH command whether the
    FlashServer works correctly?
    2. If i download and install the Script with the root
    Account, what i need to enter, witch during the Flash Media Server
    processes for default "user" and default "group"?
    3. Can can i cange without some Problem the default path
    during the installation?

    The Answer is in your port TrippleEx.
    You must install libnspr4 library first.

  • FMS RED HAT LINUX PROBLEMS

    Hi,
    I hope that someone can help me. I am having so much trouble
    getting FMS to work it is unbelievable.
    We have installed FMS onto virtual server running Red Hat
    Linux Enterprise 3. We have managed to get
    FMS running but cannot get a connection to work. This is
    using the sample application 'textchat'. here is a summary of what
    we and a coleague have done.
    1) I have linked the libraries to obtain the desired
    libssl.so.4,
    libssl.so.6, libcrypto.so.4 and libcrypto.so.6.
    2) I have installed the lates mozilla firefox and the latest
    flash
    plugin (together with the update-flashplugin)
    3) Then I have created the installation by adding the
    following entry:
    /etc/redhat-release together with it's content
    4) Then I have performed a regular fms installation together
    with adding
    the licensing etc. I have also copied the textchat main.asc
    file and the
    textchat pages (swf and html)
    So basically we have added all the missing libraries (that we
    know of...cmon adobe get it together £3000
    and you don't even include relavent libraries) .
    If any body has any ideas please reply. we are almost a month
    down the line struggling with this software.
    Thanks for an help
    Paul

    Got Oracle Grid Infrastructure 11.2.0.3 to work on Red Hat Enterprise 6.3 Linux with out using asmlib and oracleasm.
    SQL> alter system set asm_diskstring='/DATA/','/FRA/' scope=both;
    SQL> show parameters asm_diskstring
    NAME TYPE VALUE
    asm_diskstring string /DATA/, /FRA/
    SQL> create diskgroup FRA external redundancy disk '/FRA/';
    Diskgroup created.
    SQL> select name,state, total_mb, free_mb from v$asm_diskgroup;
    NAME STATE TOTAL_MB FREE_MB
    DATA MOUNTED 500,000 494,000
    FRA MOUNTED 200,000 194,000
    The issue I had encountered that was that I tried to install and configure Grid Infrastructure the way that I had previously using Red Hat Linux 5.5, 5.8 and then 6.0. I had decided to install Red Hat Linux 6.3 which does not support Oracle asmlib and oracleasm to keep up with the technology and to be innovative.
    Oracle has added significant enhancements to Grid Infrastructure. The only way to become aware of these enhancements is to "Do It". I've documented this implementation and will now

  • How to force authenication to stream live content FMS Interactive Server on Linux

    We purchased Flash Media Streaming Server Interactive edition in order to have the security featuers of not allowing unauthorized connections streaming live content to the server.
    Is there a document with procedures that details how to make this happen, the allowedHTMLdomains.txt does not work when you place in IP ranges that you do not want connecting.
    I need some help just to figure out a way to keep someoen from connecting to the server and not streaming live content.
    Has anyone configured this in Linux because the documentation is mainly for Windows.
    Any help/advice would be great since this seems to be a common problem for anyone who runs Linux.

    The FMS server does not the livepkgr application as its default. There is no default application as such.
    FMS server installer comes with few applications to make it easier to get started, the four applications live, vod , multicast and livepkgr , each one of these applications trying to give an easy way of implementing the different scenarios.
    live and vod are the basic RTMP live and vod cases, while multicast gives a sample implementation for RTMFP and P2P cases, livepkgr is the sample for HDS / HLS cases using HTTP Dynamic Streaming and HTTP Live Streaming for iOS devices. None of these are default, and all of them can be made use of , depending on your scenario.
    Each of these applications have the necessary files within its folder, a main.asc file that has the server side script which can include some business logic or authentication stuff (its not mandatory to have any of these files, that means, a blank folder would still /can still act as an application ! ). So, main.asc is specific to an application and it can contain the script to guide the behavior. None of these asc files are loaded by default, they are dependent on the application,
    The application can be loaded on server start up or upon the first connection to it. So unless there is a specific activity to load it up, none of the applications (and their corresponding script files) are loaded on the server engine.
    The applications, their script and other files are not specific to the interactive server, they are present and the functionality is same on all flavors of FMS and on both windows and linux.
    main.far file is just the signed archive of main.asc to avoid any changes to be made to it (the licensing process on the streaming server to restrict unsigned applications to be loaded is the reason to make this change), and hence if you make changes to the main.far , the application will not work. But this does not mean that you cannot make any changes. You can simply delete the far file and copy the main.asc (and edit it ,if needed) from the samples folder to make the applications work. You can also make copies of the applications.
    The documentation does not cover linux because there is no difference at all from windows, and what's true for windows should be the same for linux as well , in terms of its functionality.
    By default, FMS comes with only one virtual host : _default_VHost. I am not sure where you seeing the three virtual hosts.
    What query string you want to make work on Linux ? Can you please clairfy.
    I hope the information above clarifies some of your queries. Thank you !

  • FMS on non-Redhat linux distributions?

    Hi,
    We do not use, or ever want to use Redhat Enterprise
    editions. Is it possible to get FMS to work on a non-Redhat linux?
    I can't believe a company like Adobe/Macromedia would provide
    such poor support for Linux, and constrain it to one distribution.
    Regards,
    Cormac

    Yeah - it took me a while to get it to work. By default it
    would simply exit when you try to run the server, and everything
    looked fine - but it never actually loaded. Turned out I was
    missing libraries, and there was no error(because of some bad shell
    scripting, that they should fix!!!).
    I installed it on a Debain server (owned and used by about 10
    people) - and it crashed it. They were not happy.
    Anyway,
    Cheers!

  • Deploying FMS 3 in multipla linux boxes

    Greetings!!!
    We are planning to install a Flash Media Server 3 on two
    linux boxes for load balancing with VIP URL for those. This is a
    simple application for capturing media for not more than a minute.
    Wanted to know what are the drawbacks and advantage of
    deploying in multiple boxes.
    Thanks,

    I dont know... The guy that set up FMS couple years ago  was able to connect to the FMS without any scripts to my knowloege, Once he got it done, all I had to do is upload videos to FTP and the videos stayed on the website.
    ==============================
    This is what I have in a email:
    Your all uploaded  video should go under "/public_html/wp-content/uploads"  directory.
    Streaming server will fetch videos from this directory, for your  information this is a link created for FMS-Streaming application.
    You can  generate directory tree under "/public_html/wp-content/uploads". 
    And you can generate RTMP path by following way. 
    /public_html/wp-content/uploads/2009/06/lesson_01.flv
    will become 
    rtmp://11.11.11.11/vod/?id=streams/uploads/2009/06/lesson_01.flv
    ==============================
    So, I guess what my question is how do get the FMS to fetch the videos I upload?  I kind figure I need to edit the "Application.xml" or the "fms.ini"... but what?

  • Is there a text-based FMS 3 installer for Linux?

    Just downloaded FMS 3 for Linux. Per
    (flashmediaserver_install.pdf) installer document, it implies that
    you must run some kind of X Window (Gnome or KDE) to in order to
    install the product. Is that true? If that is true, is there an
    alternative, such as a text-based installer? Thanks.

    No, there's isn't. You should install IIS 7 first, and then install 32-bit version OBIEE.

  • FMS 4.0 recordings Linux permissions

    I'm using a Flash Media Server 4.0 developer on Linux.
    it required to be installed as root, so this is how its installed.
    my application create file captures on the server via publish "record".
    file captured are created, but with limited permissions as user "nobody".
    is there a way to change the created directory and files permissions as they are created?
    Thanks,
    Ofer

    well when I change permissions on a directory i use chmod 777 this is not the most secure directory permissions but should work. chown also comes in handy. Are you sure you have FMS installed and working on linux? Because if you don't know how to change directory permissions from the terminal then I would tend to doubt you have it installed correctly.Then again I've been wrong before.

  • Linux FMS 3.5

    OK... I have successfully installed FMS 3.5 on my Linux server. If I go to the sample video player and play rtmp:/vod/48, the video plays perfectly.  I did that by SSH the video to the actual FMS media folder in /opt/adobe/fms/applications/vod/media.
    Now, I want the ability to FTP the videos to my client’s website (i.e. /home/user/public_html/videos)
    This is the part I am not sure on...
    - Where do I go and add that info so I can FTP the videos without SSH?
    - What do I actually type in?
    Thanks

    I dont know... The guy that set up FMS couple years ago  was able to connect to the FMS without any scripts to my knowloege, Once he got it done, all I had to do is upload videos to FTP and the videos stayed on the website.
    ==============================
    This is what I have in a email:
    Your all uploaded  video should go under "/public_html/wp-content/uploads"  directory.
    Streaming server will fetch videos from this directory, for your  information this is a link created for FMS-Streaming application.
    You can  generate directory tree under "/public_html/wp-content/uploads". 
    And you can generate RTMP path by following way. 
    /public_html/wp-content/uploads/2009/06/lesson_01.flv
    will become 
    rtmp://11.11.11.11/vod/?id=streams/uploads/2009/06/lesson_01.flv
    ==============================
    So, I guess what my question is how do get the FMS to fetch the videos I upload?  I kind figure I need to edit the "Application.xml" or the "fms.ini"... but what?

Maybe you are looking for