FMS service fails to start automatically

I have Flash Media Server installed on Windows Server 2007.
I configured the Flash Media Server service to Automatic (Delayed Start), using a network logon instead of the local system account.  In case you are curious, I use the network logon for the service because  I need Flash Media Server to be able to access media stored on a  network share.
My problem is that, despite the Automatic start, the service does not seem to start automatically. Also, if I log out of that network account, the service seems to stop.
Any insights as to what I can do to make sure that Flash Media Server will always start, as well as keep it running even if no accounts are logged in?

I think this is related to how permissions work on Windows 2008 Server or on Windows 2007 . I think what is needed here is that your account needs to be an Administrator or with Administrator rights
Check this doc : http://help.adobe.com/en_US/flashmediaserver/install/WS5b3ccc516d4fbf351e63e3d119ed5bf947- 7ffc.html (see point 1)
http://help.adobe.com/en_US/flashmediaserver/install/WS5b3ccc516d4fbf351e63e3d119ed5bf7c0- 7ffc.html (see point 2.3 of Launch the Flash Media Server Start Screen > To launch the Start Screen )

Similar Messages

  • "Reporting services" service does not start automatically

    I have installed reporting services from SQL Express SP1 package. OS is Windows 2000 SP4. Just after installation "Reporting services" service has StartMode=Automatic and LogOnAS=LocalSystem as shown in SQL Server Configuration Manager. When system is rebooted reporting services state is Stopped and there is 2 errors in System log:
    1. Timeout (30000 milliseconds) waiting for the SQL Server Reporting Services (REPS) service to connect.
    2. The SQL Server Reporting Services (REPS) service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion.
    If i select "start" from service's context menu then it starting normally and it's state becomes Running.
    What can i do to make reporting services starting automatically on system load?

    i  have the same problem here in one of our servers ,, it was working and suddenly it stopped i don't know why 
    when i reviewed the Event Viewer :
    Event Type: Error
    Event Source: SQL Server Report Service
    Event Category: None
    Event ID: 0
    Date: 8/22/2010
    Time: 12:05:26 PM
    User: N/A
    Computer: SERVICE-CENTER
    Description:
    Service cannot be started. Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information. ---> System.UnauthorizedAccessException:
    Access to the path 'C:\Program Files\Microsoft SQL Server\MSSQL.3\Reporting Services\ReportServer\RSReportServer.config' is denied.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
       at Microsoft.ReportingServices.Diagnostics.Globals.SafeOpenXmlDocumentFile(XmlDocument doc, String pathToXmlFile)
       at Microsoft.ReportingServices.Diagnostics.RSConfiguration.LoadDocument()
       at Microsoft.ReportingServices.Diagnostics.R...
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Any body can help with this ,, because i didn't find anything helpful till now !!!
    dear all 
    i installed SQL Server 2005 SP2 and it solved my problem 
    wish you all luck 

  • Windows listener +service does not start automatically eventhough Automatic

    Hi
    When I restart the database server, the listener is not starting automatically , so as the service.
    Both are set to start automatically.
    This was working before and all of a sudden, this problem appeared.
    I dont remember changing any setting on the database side but on windows server side, not sure if anything is changed.
    The error we received:
    ============
    The OracleServiceGEOOAP service failed to start due to the following error: %%1053 Service error on GEPGPO01-V
    The OracleOraDb11g_home1TNSListener service failed to start due to the following error: %%1053 Service error on GEPGPO01-V
    alert log
    =======
    Fatal NI connect error 12638, connecting to:
    (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
    VERSION INFORMATION:
         TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
         Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
    Time: 11-MAR-2011 15:44:26
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12638
    TNS-12638: Credential retrieval failed
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0
    nt OS err code: 0
    listener.log
    ========
    Fri Mar 11 15:44:23 2011
    11-MAR-2011 15:44:23 * service_update * geop * 0
    11-MAR-2011 15:44:29 * service_died * geooap * 12547
    TNS-12547: TNS:lost contact
    11-MAR-2011 15:44:30 * service_died * geop * 12547
    TNS-12547: TNS:lost contact
    Fri Mar 11 15:44:37 2011
    11-MAR-2011 15:44:37 * (CONNECT_DATA=(SID=GEOOAP)(CID=(PROGRAM=C:\Program Files\Quest Software\Toad for Oracle\toad.exe)(HOST=D00661)(USER=app_nathv))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.4.136.230)(PORT=65288)) * establish * GEOOAP * 12505
    TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
    11-MAR-2011 15:44:41 * (CONNECT_DATA=(SID=GEOOAP)(CID=(PROGRAM=C:\Program Files\Quest Software\Toad for Oracle\toad.exe)(HOST=D00661)(USER=app_nathv))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.4.136.230)(PORT=65289)) * establish * GEOOAP * 12505
    TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
    11-MAR-2011 15:44:43 * (CONNECT_DATA=(SID=GEOOAP)(CID=(PROGRAM=C:\Program Files\Quest Software\Toad for Oracle\toad.exe)(HOST=D00661)(USER=app_nathv))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.4.136.230)(PORT=65290)) * establish * GEOOAP * 12505
    TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
    Fri Mar 11 15:53:46 2011
    So now we have to manually restart the listener and service , for the database to be opened. Is it possible to give direction what areas need to check, to solve this issue?
    Thanks.

    Hi Krithi,
    Can you confirm my understanding here:
    * Since a short time the automatic startup of the listener and Oracle instance fail.
    * You can manually startup the listener and database instance without any problem, and then all runs as expected
    so far so good?
    What's your procedure to start the listener and DB instances?
    Are you performing the startups with your own user account, or SYSTEM, or a dedicated Oracle account?
    Are the windows services running under SYSTEM, a dedicated Oracle user....??
    Could it be that the system administrator installed something (like a new Oracle client) which would have changed some settings?
    Can you compare the environment variables (ORACLE_HOME, ORACLE_SID, PATH) between the account YOU use for manual startup and those for the user account used to (auto)start the services?
    Maybe you can try to plan a reboot after you have set the problematic services to run under your profile?
    Well.... a few points to investigate if not yet considered.
    HTH,
    Thierry

  • HT203175 How does one fix the  problemd.... "application itunes helper.exe - mobile me service failed to start becasue missing  MSVCR80.dll" ?  This started after the last "update" of itunes

    With a recent update of itunes, ( a couple weeks ago), when plugging in my iphone, itunes did not automatically launch...and when manually selecting itune to open I recieve the statement ...
    "application itunes helper.exe - mobile me service failed to start becasue missing  MSVCR80.dll" ? 
    I have gone to the itunes site and reloaded itunes....and did not fix the problem. ....help

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (100109)

  • Trying to install the latest iTunes on my Gateway w/ Windows XP.  I keep getting the message "Service 'Bonjour Service' (Bonjour Service) failed to start.  Verify that you have sufficient privileges to start system services."

    Hi, I'm trying to re-install the latest iTunes on my Gateway w/ Windows XP.  I had to update it a while back to put songs on my brother's iPod, but my computer froze halfway through and nothing has worked right since. 
    I keep getting the message "Service 'Bonjour Service' (Bonjour Service) failed to start.  Verify that you have sufficient privileges to start system services."
    I looked through older discussions that told me to go to right click My Computer - Manage - Services and Applications - Services - Find Bonjour and restart it. 
    Well, the only option that I can click on is Start.  When I do, it says "Windows could not restart the Bonjour Service service on Local Computer.  Error 2: The system cannot find the file specified."
    Where do I go from here?  Help would be greatly appreciated, I've been trying to fix this for over a year now with no dice.  Also, I cannot do a factory reset (last effort) because it says the administor's account is disabled and I do not have the disc.

    Sorry if double posting is a no-no here, but I forgot to add that I've already tried disabling Spyware Doctor.

  • Apple Mobile Device Service fails to start

    The last update failed on my window 7 pc,
    resulting in me having to try it manually download and install, this also
    failed eventually it told me to delete and reinstall, this fails due to the
    apple mobile device service failing to start, and asking me if I have
    sufficient privileges to start system service, help please

    Hi there Jbrashear,
    It sounds like you want to know how to restart the Apple Mobile Device Service because of an alert that was displayed when you were trying to update or reinstall iTunes.
    The article below will walk you through the process starting or stopping the Apple Mobile Device Service on your PC.
    How to restart the Apple Mobile Device Service (AMDS) on Windows - Apple Support
    Also, if you haven't already, take a look at this article which walk you through the process of completely removing iTunes and then reinstalling it.
    Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
    Take care,
    -Jason

  • Apple Mobile Device Service failed to start which eventually leads to windows error 193 which never goes away no matter what I do  and the dreaded

    Mid way through download of I-Tunes after clearing every Apple program from my computer I get "Apple Mobile Device Service" failed to start message.  Eventually leading to Windows error 193 (error 7).  How do I get Apple Mobile Device Service to start so I do not get error messages and failure of I-Tunes to install?

    If you have a 64-bit machine, then try the "for older video cards" version...
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • I'm installing the newest itunes 64 bit on my win 7 64 bit professional os. using the itunes installer it loads itunes part way and then i get an error message saying that bonjour service failed to start. i cant get itunes any further. i have to back out

    I'm installing the newest version of Itunes over the last version on my laptop. win 7 pro os. it starts the install then a error msg comes up stating that Bonjour service failed to start. verify that i have sufficient priveleges to start system services. I can't retry, ignore only cancel which un-installs all that it has installed and reverts me to the last version which i had. any idea?

    it starts the install then a error msg comes up stating that Bonjour service failed to start. verify that i have sufficient priveleges to start system services.
    Sometimes we can get past that one by disabling the Bonjour Service prior to the install.
    In your Start menu, right-click Computer and select "Manage".
    Expand "Services & Applications".
    Open "Services". (Perhaps maximise the screen to better see what's going on.)
    Right-click the Bonjour Service and select "Properties".
    In the General tab, set the Startup type to "Disabled":
    ... and click OK.
    Restart the PC and try another iTunes install. Does it go through properly this time?

  • When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

    Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
    When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

    Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
    If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
    For example, here's the log entry for McAfee:
    9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
    Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
    After I made the change, iTunes installed without complaint.

  • Windows listener service will not start automatically

    I just installed 11.2.0.3 Standard Edition One and when I reboot the server, the listener service is not started. The service is set to start Automatically. I have to login, open services and then push start.
    The oraceServiceSId does start automatically,
    The listerner service does not start automatically,
    The dbconsole service does not start automatically,
    The processManger1 service (from middleware) does not start automatically
    This is Windows 7 64 bit.
    Any ideas?
    Edited by: brian.mcginity on Dec 10, 2011 11:25 AM

    I found where the services logs are recorded in the event viewer. Funny thing just happened, I was just about to do another reboot so I could check the logs when I noticed there were window updates in q.
    So after running the updates, the os requested to reboot . For the first time, the services started automatically.
    These are the updates which fixes the probem:
    Security Update for Windows 7 for x64-based Systems (KB2639417)
    Cumulative Security Update for Internet Explorer 9 for Windows 7 for x64-based Systems (KB2618444)
    Security Update for Windows 7 for x64-based Systems (KB2620712)
    Cumulative Security Update for ActiveX Killbits for Windows 7 for x64-based Systems (KB2618451)
    Edited by: brian.mcginity on Dec 13, 2011 9:52 PM
    Edited by: brian.mcginity on Dec 13, 2011 9:53 PM

  • Transport service does not start automatically after upgrade to exchange 2010 SP2 from Exchange 2010 SP1

    Hi,
    I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
    Tried manually start services, it started successfully but again goes down within few seconds automatically.
    Reboot server. but no luck.
    Any help.
    MD

    Hi,
    I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
    In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Help!!! iTunes install error "Apple Mobile Device Service Failed To Start". Error 7 (Windows Error 193)

    Help! Following a standard upgrade I got the error message "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 193).
    I am running Windows 7 and installing again brings the message "Apple Mobile Device Service failed to start. Verify that you have sufficient privileges to start system services"
    I have uninstalled everything Apple, deleted all related folders and run as administrator numerous times with no luck.
    I had hoped that iTunes 12.1.2 would resolve the issue, unfortunately it failed to do so leaving me iTunes free which is driving me mad!
    Can anyone advise what else I can do to resolve the error and bring back iTunes?
    Thanks

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version, or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • Dell 64 bit pc . Tried updating to latest version.  Error message says Apple mobile device service failed to start. Verify you have sufficient privileges to start system services.  What does that mean?

    I have a dell 64 bit pc and had an older version of ITunes installed.  When I tried to install the 12--- version, the install stopped with the message, "Apple Mobile Device Services failed to start, verify that you have sufficient privileges to start systems services".   I have no clue what that means.  can anyone help.  ????

    Hi doywks,
    The Apple Mobile Device is a component of iTunes that communicates between your computer and your iPhone or iOS device.  The error message you are seeing "verify that you have sufficient privileges to start system services" has to do with the Windows operating system.  It's possible that you are not logged in as the administrator for your Windows PC.  Or, you may have antivirus software stopping the Apple Mobile Device from running.  
    If you are having issues updating iTunes on your PC, follow the steps in the article below.
    If you can't install or update iTunes for Windows - Apple Support
    https://support.apple.com/en-us/HT201668
    How to restart the Apple Mobile Device Service (AMDS) on Windows - Apple Support
    https://support.apple.com/en-us/HT203188
    I hope this information helps ....
    - Judy

  • Service 'Apple Mobile Device Service' (Apple Mobile Device Service) failed to start. Verify that you have sufficient privileges to start system services????

    I recently got an iPhone 5s and had to download the new itunes which I had been putting off for ages, otherwise it wouldn't sync. It wouldn't let me download and instead said 'service mobile device service' failed to start. I then tried to uninstall (as recommended by apple) and re install but the same error came up. If i click ignore, it finishes downloading but refuses to open, instead coming up with 'error 7 windows error 193'. Ive tried everything and this is really frustrating, help would be much appreciated

    OK Dave, i just found one solution that worked for me.  However, I find that solutions appearing on discussion threads often are very OS and machine specific, so I normally try a variety of suggestions.  After awhile one suggestion normally works.  So try this one, remembering I have a Dell PC with Win 7 x 64 which may not fit your situation. 
    Go to https://discussions.apple.com/message/24606166#24606166 where you will find a solution from touringtest2.  The soulition requires an easy uninstall of Apple software items.  I followed the steps outlined exactly and have successfully installed the most recent iTunes software.  Hope this works for you and a few others too.  Apple support sure doesn't make it easy for interested users which is why I appreciate support communities like this.  Thank you touringtest2 wherever you are.  Best - RonS42

  • HT1926 Installation fails because Apple Mobile Device Service failed to start?

    When  I attempted to update ITunes, it failed at the starting services point because "Apple Mobile Device Service failed to start".  The ignore button would not work.  Retry did not fix it.  I have deleted all ITunes from my computer, restarted, and attempted a new install.  Same problem.  Help.

    The frequently suggested repair steps listed in comments at http://support.apple.com/kb/HT1923 and http://support.apple.com/kb/HT1926 did not work for me yesterday when I attempted for an entire day to fix this commonly reported problem with the newest iTunes update. I now realize that I overlooked one step listed in http://support.apple.com/kb/HT1923.
    My computer has a Windows 64 bit operating system. I should have  paid attention to this instruction:
    "If you have a 64-bit version of Windows, you'll need to confirm that the following folders have been removed:
    C:\Program Files (x86)\Bonjour
    C:\Program Files (x86)\Common Files\Apple\
    C:\Program Files (x86)\iTunes\
    C:\Program Files (x86)\iPod\  "
    Tonight, I removed those previous version files from the Program Files (x86) directory and executed the rest of the steps listed. Success resulted. If you are struggling like I did to install the iTunes newest update on a Windows 64 bit operating system, you might benefit to recheck that you followed the instruction listed above.

Maybe you are looking for

  • Compatibility and using NB6.8 with the IdM IDE Plugin

    What compatible versions of IdM - NB - IDE Plugin work together ? I recent versions: IdM 8.x and NB 6.8 but I don't see that there is a plugin version compatible with NB.v6.8. My IDE is version 8.1.0 of the .nbm The last link claims to have code that

  • How a custom component is called when we install a custom component in UCM.

    How a custom component is called when we install a custom component in UCM. On what event the component services will be activated and called. Suppose i create a Custom service name MULTIPLECHECKIN then this service will be called on what event and w

  • Facebook events not showing up in my calendar

    I thought facebook events were going to show up in our calendars with the new update.  Mine is not doing that. Was I wrong about that's not is there anything I can do to fix it? Thanks!

  • Mapping Type missing for Import Dimension via Interface Tables

    Greetings Everyone, I was wondering if anyone else had this issue. I have two Generic dimensions that I have created within the Shared Library. The issue that I'm having is that whenever I create a new profile for these two dimensions, there is never

  • Soundblaster live value vs soundblaster 7.1 24

    Just bought from walmart a soundblaster li've 7. 24bit card to upgrade my 4 year old sound blaster li've value card thats 5. i think. but after a little research it seems the value card is 32 bit's so i actualy downgraded? or did i really upgrade?