FMS3 - shared memory (__FCS__serverstats_) init failed
We are using SLES10 on 64-bit system and are unable to start
the development version of FMS3. An error is reported in
/var/log/messages :
shared memory (__FCS__serverstats_) init failed
Help is needed, thank you.
tmp/ is (/opt/adobe/fms/tmp) 777 and owned by root, I even tried chown'ing to the user that runs fms, no luck.
tmp gets created when i run it the FIRST time:
[root@vid10 fms]# ls -al tmp/
total 8
drwxrwxrwx 2 admin admin 4096 Apr 8 21:15 .
drwxr-xr-x 11 admin admin 4096 Apr 8 21:09 ..
-rwxrwxrwx 1 admin admin 0 Apr 8 21:09 __FCS__serverstats__shm_mem
-rwxrwxrwx 1 admin admin 0 Apr 8 21:09 __FCS__serverstats__shm_mtx
Could it be something with the shm setting, maybe sysctl?
I have 4GB of ram in this machine. Same exact machine works perfect on rhel 4
I appreciate your quick reply.
Similar Messages
-
Centos 5.2 'shared memory init failed' issue - doesn't start
I am running centos 5.2 32bit and I installed FMS 3.0.2 (Tried FMS 3.0.4 also)
FMS installed just fine with the -platformWarnOnly flag.
My problem is it will not start at all, nothing starts. no logs in the /opt/adobe/fms either, I only get logs in /var/log/messages with the following
Apr 8 17:14:48 vid Server[22463]: Process (22463) : shared memory (__FCS__serverstats_) init failed.
Apr 8 17:14:53 vid Server[22475]: Process (22475) : shared memory (__FCS__serverstats_) init failed.
Apr 8 17:21:15 vid Server[22733]: Process (22733) : shared memory (__FCS__serverstats_) init failed.
Apr 8 17:21:20 vid Server[22745]: Process (22745) : shared memory (__FCS__serverstats_) init failed.
I also did a ldd on fmsmaster and symlinked "libasneu.so.1 => not found" to the real file, that did nothing.
Here are some of the rpms that im pretty sure are needed.
[root@vid fms]# rpm -qa | grep compat
compat-gcc-34-g77-3.4.6-4
compat-libgcc-296-2.96-138
compat-glibc-headers-2.3.4-2.26
compat-gcc-34-3.4.6-4
compat-libf2c-34-3.4.6-4
compat-gcc-34-c++-3.4.6-4
compat-libstdc++-296-2.96-138
compat-glibc-2.3.4-2.26
compat-libstdc++-33-3.2.3-61
[root@vid fms]# rpm -qa | grep stdc
compat-libstdc++-296-2.96-138
libstdc++-4.1.2-44.el5
compat-libstdc++-33-3.2.3-61
libstdc++-devel-4.1.2-44.el5
[root@vid9 fms]# rpm -qa | grep nspr
nspr-devel-4.7.3-2.el5
nspr-4.7.3-2.el5
Would appreciate any help guys!!
I also googled my error and there is one post with no answer here: http://forums.adobe.com/message/105674#105674
Thanks!tmp/ is (/opt/adobe/fms/tmp) 777 and owned by root, I even tried chown'ing to the user that runs fms, no luck.
tmp gets created when i run it the FIRST time:
[root@vid10 fms]# ls -al tmp/
total 8
drwxrwxrwx 2 admin admin 4096 Apr 8 21:15 .
drwxr-xr-x 11 admin admin 4096 Apr 8 21:09 ..
-rwxrwxrwx 1 admin admin 0 Apr 8 21:09 __FCS__serverstats__shm_mem
-rwxrwxrwx 1 admin admin 0 Apr 8 21:09 __FCS__serverstats__shm_mtx
Could it be something with the shm setting, maybe sysctl?
I have 4GB of ram in this machine. Same exact machine works perfect on rhel 4
I appreciate your quick reply. -
1494 ERROR: xa_open() - failed to get shared memory
Hi,
I am getting the following error when I try to create a Q Space with number of
messages in it as 5,00,000. But if I try the same for 4,00,000 messages, it is
successful.
I checked the Shared memory in the machine and it is much more than it is required
for 5,00,000 messages Q Space.
Do I need to tune any other operating system parameter ?
1494 ERROR: xa_open() - failed to get shared memory, key = key, errno = errno
Description
While opening the queue space, xa_open() was unable to get the necessary shared
memory. The error number, errno, is printed in the message.
Action
This failure can be caused by a number of reasons but the most likely is that
either the amount of shared memory requested would cause an operating system tunable
to be exceeded (shared memory for the system or shared memory identifiers), or
another application is using the same key. Determine and correct the problem.
Thanks
VipulPeter,
the errno value is 22
thanks
Vipul.
Peter Holditch <[email protected]> wrote:
vipul,
What errno value did you get when you saw this message?
Regards,
Peter.
vipul wrote:
Hi,
I am getting the following error when I try to create a Q Space withnumber of
messages in it as 5,00,000. But if I try the same for 4,00,000 messages,it is
successful.
I checked the Shared memory in the machine and it is much more thanit is required
for 5,00,000 messages Q Space.
Do I need to tune any other operating system parameter ?
1494 ERROR: xa_open() - failed to get shared memory, key = key, errno= errno
Description
While opening the queue space, xa_open() was unable to get the necessaryshared
memory. The error number, errno, is printed in the message.
Action
This failure can be caused by a number of reasons but the most likelyis that
either the amount of shared memory requested would cause an operatingsystem tunable
to be exceeded (shared memory for the system or shared memory identifiers),or
another application is using the same key. Determine and correct theproblem.
Thanks
Vipul -
Q_CAT:1494: ERROR: xa_open() - failed to get shared memory
I am getting this error while booting tuxedo.
My question is how do I calculate shared memory on solaris and then which parameter to increase in /etc/system file.
ThanksVaibhav,
You need to make sure that the product of SHMMAX and SHMSEG is at least
equal to the total amount of shared memory needed by Tuxedo and any other
applications running on your machine.
"tmboot -c" will tell you the amount of shared memory required for the
Tuxedo bulletin board, but this does not include any space required by /Q.
To get /Q shared memory requirements, you can use the qmadmin subcommand
"qspacelist". If you have more than one queuespace on your system, you must
do this for each queuespace on your system, and add this total to the
bulletin board requirements. If any other applications on your machine use
shared memory, add their requirements as well. In case requirements change
in the future, it is good to add a comfortable amount of padding to this
sum.
Ed
<Vaibhav Gaur> wrote in message news:[email protected]..
I am getting this error while booting tuxedo.
My question is how do I calculate shared memory on solaris and then which
parameter to increase in /etc/system file.
Thanks -
Disp+work stop because of shared memory?
Hello Gurus, I have an SAP server that will not start. It was running previously, but after a parameter update and an instance restart, I cannot get the dispatcher running.
System is Windows 2012 Server, MSSQL 2008 R2, 16 Core 132 GB RAM.
I believe it is related to shared memory overlapping somehow, but I am not sure how to resolve or investigate. I have had issues previously with memory overlap halting SAP servers with Diagnostics Agents, but this server is not currently running any DAA. It is running SAPRouter and some SAP Web Dispatcher instances.
I will include my trace files below:
Please help!
DEV_W0:
trc file: "dev_w0", trc level: 1, release: "721"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid PRD
M systemid 562 (PC with Windows NT)
M relno 7210
M patchlevel 0
M patchno 100
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile \\SAPERP\sapmnt\PRD\SYS\profile\PRD_DVEBMGS00_SAPERP
M pid 7668
M
M kernel runs with dp version 137000(ext=119000) (@(#) DPLIB-INT-VERSION-137000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 7668) [dpxxdisp.c 1376]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 42864 (2256)
M DpShMCreate: sizeof(tm_adm) 5517056 (27448)
M DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
M DpShMCreate: sizeof(comm_adm) 1384080 (2744)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (80)
M DpShMCreate: sizeof(vmc_adm) 0 (2160)
M DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3952
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000000200050, size: 7174832)
M DpShMCreate: allocated sys_adm at 0000000000200060
M DpShMCreate: allocated wp_adm_list at 00000000002030B0
M DpShMCreate: allocated wp_adm at 00000000002032A0
M DpShMCreate: allocated tm_adm_list at 000000000020DA20
M DpShMCreate: allocated tm_adm at 000000000020DA70
M DpShMCreate: allocated wp_ca_adm at 0000000000750980
M DpShMCreate: allocated appc_ca_adm at 0000000000760390
M DpShMCreate: allocated comm_adm at 000000000076FDA0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 00000000008C1C40
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated gw_adm at 00000000008C1CF0
M DpShMCreate: allocated j2ee_adm at 00000000008C1D30
M DpShMCreate: allocated ca_info at 00000000008C2CB0
M DpShMCreate: allocated wall_adm at 00000000008C2D40
M DpCommAttachTable: attached comm table (header=000000000076FDA0/ft=000000000076FDB0)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use spinlock for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
M
M Fri May 16 01:23:14 2014
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Fri May 16 01:23:15 2014
M ThInit: running on host SAPERP
M
M Fri May 16 01:23:16 2014
M calling db_connect ...
B Loading DB library 'E:\usr\sap\PRD\DVEBMGS00\exe\dbmssslib.dll' ...
B Library 'E:\usr\sap\PRD\DVEBMGS00\exe\dbmssslib.dll' loaded
B Version of 'E:\usr\sap\PRD\DVEBMGS00\exe\dbmssslib.dll' is "721.02", patchlevel (0.44)
C Callback functions for dynamic profile parameter registered
C Thread ID:4168
C Thank You for using the SLODBC-interface
C Using dynamic link library 'E:\usr\sap\PRD\DVEBMGS00\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C SAP patchlevel 0
C SAP patchno 100
C Last MSSQL DBSL patchlevel 0
C Last MSSQL DBSL patchno 44
C Last MSSQL DBSL patchcomment DBSL support for Microsoft ODBC Driver 11 for SQL Server (1816426)
C ODBC Driver chosen: SQL Server Native Client 11.0 native
C lpc:(local) connection used on SAPERP
C lpc:(local) connection used on SAPERP
C Driver: sqlncli11.dll Driver release: 11.00.3000
C GetDbRelease: 11.00.3339.00
C GetDbRelease: Got DB release numbers (11,0,3339,0)
B Connection 0 opened (DBSL handle 0)
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
I
I Fri May 16 01:23:17 2014
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000018030050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FFDDAB0050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000018470050, size: 134217728)
M SHM_ROLL_ADM (addr: 0000000020480050, size: 2767448)
M SHM_PAGING_ADM (addr: 0000000020730050, size: 787488)
M ThCreateNoBuffer allocated 548152 bytes for 1000 entries at 0000000020800050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 31056 bytes (50 server) at 0000000000910050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
B
B Fri May 16 01:23:18 2014
B db_con_shm_ini: WP_ID = 0, WP_CNT = 19, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0000000027280160, size: 90000000, end: 000000002C854BE0)
B dbtbxbuf: Buffer TABLP (addr: 000000002C860160, size: 20480000, end: 000000002DBE8160)
B dbsync[db_syinit]: successfully attached to shared memory, sync_adm_p = 0000000011BE0050
B dbsync[db_syinit]: Buffer synchronisation started with
B sync_concept = SEQ_NR
B sendon = 1
B bufreftime = 120
B max_gap_wait_time = 60
B ddlog_del_time = 60
B last_counter = 702514
B oldest_gap = (2147483647,00000000000000)
B time_of_last_sync = 20140516012317
B MySysId = 'SAPERP 00'
B dbexpbuf[EXP_SHB]: buffer EIBUF installed with
B semkey = 35
B shmkey = 54
B wp_n = 19
B sclass = 0
B block_length = 256
B max_objects = 2000
B max_obj_size = 859872
B pref_obj_size = 0
B est_large_obj_size = 16384
B free_vec_lg = 65
B hash_vec_size = 4001
B buffer_l = 4194304
B max_blocks = 13438
B free_blocks = 13438
B mutex_n = 4001
B max_mtx_wait_time = 17000
B recovery_delay = 500000
B tracing = 0
B force_checks = 0
B protect_shm = 0
B dbexpbuf[EXP_SHM]: buffer ESM installed with
B semkey = 56
B shmkey = 65
B wp_n = 19
B sclass = 0
B block_length = 256
B max_objects = 2000
B max_obj_size = 859872
B pref_obj_size = 0
B est_large_obj_size = 16384
B free_vec_lg = 65
B hash_vec_size = 4001
B buffer_l = 4194304
B max_blocks = 13438
B free_blocks = 13438
B mutex_n = 4001
B max_mtx_wait_time = 17000
B recovery_delay = 500000
B tracing = 0
B force_checks = 0
B protect_shm = 0
B dbexpbuf[EXP_CUA]: buffer CUA installed with
B semkey = 30
B shmkey = 47
B wp_n = 19
B sclass = 10
B block_length = 512
B max_objects = 1500
B max_obj_size = 626016
B pref_obj_size = 0
B est_large_obj_size = 98304
B free_vec_lg = 193
B hash_vec_size = 3001
B buffer_l = 3072000
B max_blocks = 4892
B free_blocks = 4892
B mutex_n = 3001
B max_mtx_wait_time = 17000
B recovery_delay = 500000
B tracing = 0
B force_checks = 0
B protect_shm = 0
B dbexpbuf[EXP_OTR]: buffer OTR installed with
B semkey = 55
B shmkey = 64
B wp_n = 19
B sclass = 13
B block_length = 256
B max_objects = 2000
B max_obj_size = 859872
B pref_obj_size = 0
B est_large_obj_size = 20480
B free_vec_lg = 81
B hash_vec_size = 4001
B buffer_l = 4194304
B max_blocks = 13438
B free_blocks = 13438
B mutex_n = 4001
B max_mtx_wait_time = 17000
B recovery_delay = 500000
B tracing = 0
B force_checks = 0
B protect_shm = 0
I MPI: dynamic quotas disabled.
I MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M rdisp/thwpsf_critical_path : -1 -> 0
M CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
M CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
G RelWritePermissionForShm( pLocation = 120, pEnforce = 0 )
G GetWritePermissionForShm( pLocation = 99, pEnforce = 1 )
G RelWritePermissionForShm( pLocation = 100, pEnforce = 1 )
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0000000034052380
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 00000000382B00D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 00000000382B06A0
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
A ***GENER* Trace switched on ***
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 23104kb, dir_size: 22312kb.
A Attached to PXA (address 000007FFEDAE0050, size 300000K, 1 fragments of 276896K )
A PXA allocated (address 000007FFEDAE0050, size 300000K)
A abap/pxa = shared protect gen_remote
A PXA: checking structure sizes: 752|272|16
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ATRA: pfclock execution time = 0
A abap/force_local_update_task=0
A ABAP ShmAdm attached (addr=000007DFDF142000 leng=20955136 end=000007DFE053E000)
A >> Shm MMADM area (addr=000007DFDF639B80 leng=242240 end=000007DFDF674DC0)
A >> Shm MMDAT area (addr=000007DFDF675000 leng=15503360 end=000007DFE053E000)
A RFC Destination> destination SAPERP_PRD_00 host SAPERP system PRD systnr 0 (SAPERP_PRD_00)
A RFC Options> H=SAPERP,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
H HTTP> Parameter icf/ssocookie_mandatory set to 0
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:721.02]):
B max_blocking_factor = 50, min_blocking_factor = 5,
B max_in_blocking_factor = 255, min_in_blocking_factor = 10,
B max_union_blocking_factor = 50, min_union_blocking_factor = 5,
B prefer_union_all = 1, prefer_join = 1,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0,
B select * =0x00, character encoding = STD / []:X,
B use_hints = abap->1, dbif->0x1, upto->0
M ThrCreateShObjects allocated 39514 bytes at 0000000011C00050
Y dyWpInit
Y ztta/dynpro_ara 800000
Y ztta/cua_ara 500000
Y ztta/diag_ara 250000
N SsfSapSecin: getenv(SECUDIR)=="E:\usr\sap\PRD\DVEBMGS00/sec"
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF library is E:\usr\sap\PRD\DVEBMGS00\exe\sapcrypto.dll .
N ===...SSF default hash algorithm is SHA1 .
N ===...SSF default symmetric encryption algorithm is DES-CBC .
N ===...SECUDIR="E:\usr\sap\PRD\DVEBMGS00/sec"
N ===...loading of Security Toolkit successfully completed.
N === SAPCRYPTOLIB 5.5.5C pl32 (Apr 2 2011) MT-safe
N =================================================
N
N Fri May 16 01:23:20 2014
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 721, [7210.0.100.20020600]
W ITS Plugin: Int.version, [34]
W ITS Plugin: Feature set: [31]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N SignInit: successfully obtained handle for Security Context cache
N SPNegoInit: SPNego disabled ("spnego/enable" not set to 1)
N VSI: WP init in ABAP VM completed with rc=0
E EnqLockTableSizeCalculate: session quota = 100%
E EnqLockTableAttach2: attach to lock table (size = 33554432)
E EnqLockTableMapToLocalContext: enque/use_pfclock2 = FALSE
E EnqId_Initialize: local EnqId initialization o.k.
M
M Fri May 16 01:23:40 2014
M *** ERROR => ThPlgConnectToIcm: IcmReadAck failed (-8, ni_rc=-6) [thxxplg.c 5172]
M in_ThErrHandle: 1
M *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c 11348]
M
M Info for wp 0
M
M pid = 7668
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M req.req_info =
M req.tid = -1
M req.uid = 4294967295
M req.mode = 255
M req.len = 0
M req.rq_id = 65535
M req.rq_source =
M last_tid = 0
M last_uid = 0
M last_mode = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ? tid -1 wp_ca_blk -1 wp_id -1
M -IN-- action - uid -1 appc_ca_blk -1 type -
M -IN-- new_stat NO_CHANGE mode 255 len 0 rq_id -1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: hook >TrThHookFunc< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M ThrSaveSPAFields: not an update task, no update info saved
M ThrSaveSPAFields: not a batch task, field zttabtckey not saved
M ThCallHooks: hook >ThrSaveSPAFields< o.k.
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 7668) [dpnttool.c 339]
DEV_DISP:
trc file: "dev_disp", trc level: 1, release: "721"
sysno 00
sid PRD
systemid 562 (PC with Windows NT)
relno 7210
patchlevel 0
patchno 100
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\SAPERP\sapmnt\PRD\SYS\profile\PRD_DVEBMGS00_SAPERP
pid 4924
kernel runs with dp version 137000(ext=119000) (@(#) DPLIB-INT-VERSION-137000-UC)
length of sys_adm_ext is 588 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4924) [dpxxdisp.c 1314]
shared lib "dw_xml.dll" version 100 successfully loaded
shared lib "dw_xtc.dll" version 100 successfully loaded
shared lib "dw_stl.dll" version 100 successfully loaded
shared lib "dw_gui.dll" version 100 successfully loaded
shared lib "dw_mdm.dll" version 100 successfully loaded
shared lib "dw_rndrt.dll" version 100 successfully loaded
shared lib "dw_abp.dll" version 100 successfully loaded
shared lib "dw_sym.dll" version 100 successfully loaded
shared lib "dw_aci.dll" version 100 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Fri May 16 01:23:12 2014
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6438]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >SAPERP_PRD_00 <
DpShMCreate: sizeof(wp_adm) 42864 (2256)
DpShMCreate: sizeof(tm_adm) 5517056 (27448)
DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
DpShMCreate: sizeof(comm_adm) 1384080 (2744)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (296)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (2160)
DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3952
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000005460050, size: 7174832)
DpShMCreate: allocated sys_adm at 0000000005460060
DpShMCreate: allocated wp_adm_list at 00000000054630B0
DpShMCreate: allocated wp_adm at 00000000054632A0
DpShMCreate: allocated tm_adm_list at 000000000546DA20
DpShMCreate: allocated tm_adm at 000000000546DA70
DpShMCreate: allocated wp_ca_adm at 00000000059B0980
DpShMCreate: allocated appc_ca_adm at 00000000059C0390
DpShMCreate: allocated comm_adm at 00000000059CFDA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0000000005B21C40
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 0000000005B21CF0
DpShMCreate: allocated j2ee_adm at 0000000005B21D30
DpShMCreate: allocated ca_info at 0000000005B22CB0
DpShMCreate: allocated wall_adm at 0000000005B22D40
DpCommAttachTable: attached comm table (header=00000000059CFDA0/ft=00000000059CFDB0)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (10 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
Fri May 16 01:23:13 2014
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> EsILock: use spinlock for locking
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 134981MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 134984MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 33745 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 4.0.1 4.0.1 5.1) [dpxxdisp.c 1700]
Fri May 16 01:23:40 2014
***LOG Q0K=> DpMsAttach, mscon ( SAPERP) [dpxxdisp.c 12667]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >SAPERP_PRD_00 <)
DpStartStopMsg: start msg sent
CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
*** ERROR => DpIcmMsgProcess: IcmRecMsg (rc=-8,-6) [dpxxdisp.c 19121]
Fri May 16 01:24:20 2014
*** ERROR => DpHdlDeadWp: W0 (pid 7668) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W1 (pid 7456) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W2 (pid 8096) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W3 (pid 4376) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W4 (pid 3000) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W5 (pid 3520) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W6 (pid 7024) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W7 (pid 6172) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W8 (pid 6576) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W9 (pid 7756) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W10 (pid 624) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W11 (pid 7468) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W12 (pid 1176) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W13 (pid 6812) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W14 (pid 6968) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W15 (pid 5036) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W16 (pid 5576) died (severity=0, status=0) [dpxxwp.c 1729]
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:30 2014
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri May 16 07:24:30 2014
========================
No Type Pid Status Cause Start Rstr Err Sem Time Program Cl User Action Table
0 DIA -1 Ended no no 1 0 0 NO_ACTION
1 DIA -1 Ended no no 1 0 0 NO_ACTION
2 DIA -1 Ended no no 1 0 0 NO_ACTION
3 DIA -1 Ended no no 1 0 0 NO_ACTION
4 DIA -1 Ended no no 1 0 0 NO_ACTION
5 DIA -1 Ended no no 1 0 0 NO_ACTION
6 DIA -1 Ended no no 1 0 0 NO_ACTION
7 DIA -1 Ended no no 1 0 0 NO_ACTION
8 DIA -1 Ended no no 1 0 0 NO_ACTION
9 DIA -1 Ended no no 1 0 0 NO_ACTION
10 UPD -1 Ended no no 1 0 0 NO_ACTION
11 ENQ -1 Ended no no 1 0 0 NO_ACTION
12 BTC -1 Ended no no 1 0 0 NO_ACTION
13 BTC -1 Ended no no 1 0 0 NO_ACTION
14 BTC -1 Ended no no 1 0 0 NO_ACTION
15 SPO -1 Ended no no 1 0 0 NO_ACTION
16 UP2 -1 Ended no no 1 0 0 NO_ACTION
Dispatcher Queue Statistics Fri May 16 07:24:30 2014
===========================
+------+--------+--------+--------+------------+------------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+------------+------------+
| NOWP | 1 | 33 | 2000 | 43 | 42 |
+------+--------+--------+--------+------------+------------+
| DIA | 5 | 5 | 2000 | 5 | 0 |
+------+--------+--------+--------+------------+------------+
| UPD | 1 | 1 | 2000 | 1 | 0 |
+------+--------+--------+--------+------------+------------+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| BTC | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| SPO | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
max_rq_id 40
wake_evt_udp_now 0
wake events total 40, udp 5 ( 12%), shm 35 ( 87%)
since last update total 40, udp 5 ( 12%), shm 35 ( 87%)
DpGetLoadAverage: la1[1] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[1] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[1] = 0.055556 / -1.000000 %
Dispatcher Load Statistics
+------+---------+---------+---------+
| Typ | LA1 | LA5 | LA15 |
+------+---------+---------+---------+
| DIA | 0.000 | 0.000 | 0.056 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[2] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[2] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[2] = 0.011111 / -1.000000 %
| UPD | 0.000 | 0.000 | 0.011 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[3] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[3] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[3] = 0.000000 / -1.000000 %
| ENQ | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[4] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[4] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[4] = 0.000000 / -1.000000 %
| BTC | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[5] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[5] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[5] = 0.000000 / -1.000000 %
| SPO | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[6] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[6] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[6] = 0.000000 / -1.000000 %
| UP2 | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
Dump of tm_adm structure: Fri May 16 07:24:30 2014
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T19, U20, , , 01:23:40, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Fri May 16 07:24:30 2014
=============================
Slots: 1000, Used: 2, Max: 46
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | 0xdeadbeef |
| 546 | DISPATCHER | -1 | 0xdeadbeef |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:35 2014
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >SAPERP_PRD_00 < (normal)
DpJ2eeDisableRestart
DpMBufRead: read server list from MBUF (1 entries)
DpMBufMod: name [SAPERP_PRD_00 ], types 191 state 3 (0x0 0x0 0x0 0x0)
DpMBufMod: call hooks for event MBUF_DPEVT_DSTATE (5->3)
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 000007F7B2B8B6E0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
DpWpBlksLow: wp_blks_in_queue/limit/max = 2/800/1000
DpLockWpBlkEx: lock wp ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqIPutIntoQ: put elem in queue DIA, elems=6
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 41)
MBUF server state SHUTDOWN
DpModState: change state STARTING -> SHUTDOWN
NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
DpHalt: switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
DpHalt: stop work processes
DpHalt: stop gateway
killing process (7752) (SOFT_KILL)
DpHalt: stop icman
killing process (5940) (SOFT_KILL)
DpHalt: terminate gui connections
send SHUTDOWN to REM TM 19
DpWpBlksLow: wp_blks_in_queue/limit/max = 3/800/1000
DpLockWpBlkEx: lock wp ca_blk 2
return errno (-17) to T19
DpTmSend: errormsg without overhead: use mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
DpTmSend: try to send 14 bytes to T19/M0
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 2
set status of T19 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 25 in set0
SiSelNSet: set events of sock 1440 to: ---
NiBufISelRemove: remove hdl 25 from set0
SiSelNRemove: removed sock 1440 (pos=3)
SiSelNRemove: removed sock 1440
NiSelIRemove: removed hdl 25
DpDelSocketInfo: del info for nihdl 25 (pos/type=3/3)
NiICloseHandle: shutdown and close hdl 25/sock 1440
NiBufIClose: clear extension for hdl 25
dp_tm_adm[19].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1400225080/234000
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 19
DpListRemove: remove elem 19 from tmadm_inuse_list
DpListRemove: 19 elems in tmadm_inuse_list
DpListInsert: insert elem 19 into tmadm_free_list (at begin)
DpListInsert: 182 elems in tmadm_free_list
DpHalt: wait for end of work processes
DpHalt: wait for end of gateway
[DpProcDied] Process lives (PID:7752 HANDLE:1300)
DpHalt: waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:36 2014
NiISelect: TIMEOUT occured (1000ms)
*** ERROR => [DpProcDied] Process died (PID:7752 HANDLE:1300 rc:0x0) [dpnttool2.c 147]
DpHalt: wait for end of icman
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:37 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:38 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:39 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:40 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:41 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:42 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:43 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:44 2014
NiISelect: TIMEOUT occured (1000ms)
*** ERROR => [DpProcDied] Process died (PID:5940 HANDLE:1296 rc:0x0) [dpnttool2.c 147]
DpStartStopMsg: send stop message (myname is >SAPERP_PRD_00 <)
DpStartStopMsg: Write AD_STARTSTOP message with type= 0, name=SAPERP_PRD_00 , sapsysnr= 0, hostname=SAPERP
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 000007F7B2B8B6E0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 4
AdCallRegisteredCvtToExt: opcode 4 call 000007F7B2BB1470
AdCallRegisteredCvtToExt: opcode 4 exit rc=SAP_O_K
DpConvertRequest: net size = 189 bytes
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
MsISnd2: send msg (ms hdr/msg 110/452 bytes) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 17 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 17
NiBufReceive starting
MsINiRead: received 274 bytes
MsIReceive: received msg (ms hdr/msg 110/164 bytes), flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 17 recv would block (errno=EAGAIN)
NiIRead: read for hdl 17 timed out (0ms)
DpHalt: more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
MsISnd2: send msg (ms hdr/msg 110/4 bytes) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiIRead: hdl 17 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 17 (r)
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 17 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 17
NiBufReceive starting
MsINiRead: received 114 bytes
MsIReceive: received msg (ms hdr/msg 110/4 bytes), flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsISendKeepalive : keepalive sent to message server
NiIRead: hdl 17 recv would block (errno=EAGAIN)
Fri May 16 01:24:45 2014
NiIPeek: peek for hdl 17 timed out (r; 1000ms)
NiIRead: read for hdl 17 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
DpHalt: detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 13064]
NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server (SAPERP / 3900)
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 17 in set0
SiSelNSet: set events of sock 1400 to: ---
NiBufISelRemove: remove hdl 17 from set0
SiSelNRemove: removed sock 1400 (pos=2)
SiSelNRemove: removed sock 1400
NiSelIRemove: removed hdl 17
DpDelSocketInfo: del info for nihdl 17 (pos/type=2/4)
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 000007F7B2B8B6E0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
DpWpBlksLow: wp_blks_in_queue/limit/max = 3/800/1000
DpLockWpBlkEx: lock wp ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqIPutIntoQ: put elem in queue DIA, elems=7
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 44)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 17/sock 1400
NiBufIClose: clear extension for hdl 17
MsIDetach: detach MS-system (SAPERP / 3900)
DpHalt: cleanup EM
EsCleanup( )
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4924) [dpxxdisp.c 11574]
DpHalt: Good Bye .....
SAPSTARTSRV
trc file: "sapstartsrv.log", trc level: 0, release: "721"
pid 6196
[Thr 6528] Fri May 16 00:38:09 2014
SAP HA Trace: SAP Microsoft Cluster library '721, patch 100, changelist 1397439' initialized
CCMS agent initialization for instance type ABAP: return code 0.
CCMS agent start: return code 0.
Initializing SAPControl Webservice
Starting AutoRestart thread
AutoRestart thread started, version check is enabled
SapSSLInit failed => https support disabled
Starting WebService Named Pipe thread
Starting WebService thread
Webservice named pipe thread started, listening on port \\.\pipe\sapcontrol_00
Webservice thread started, listening on port 50013
\sapadmin is starting SAP System at 2014/05/16 0:38:18
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 213]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 920]
\sapadmin is stopping SAP System at 2014/05/16 0:49:10
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 213]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 920]
\sapadmin is starting SAP System at 2014/05/16 0:50:47
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 213]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 920]
\sapadmin is stopping SAP System at 2014/05/16 1:21:22
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 213]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 920]
\prdadm is starting SAP System at 2014/05/16 1:23:04
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 213]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 920]Hi Alwina, here is the DEV_ICM trace:
From this trace, it appears that it is listening to 65000?
Netstat shows that the system is listening to 127.0.0.1:65000 .
Other SAP ports show listening on 0:0:0:0:xxxx , is ICM listening on 127 a problem?
trc file: "dev_icm", trc level: 1, release: "721"
sysno 00
sid PRD
systemid 562 (PC with Windows NT)
relno 7210
patchlevel 0
patchno 43
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\SAPERP\sapmnt\PRD\SYS\profile\PRD_DVEBMGS00_SAPERP
pid 5940
[Thr 1812] Fri May 16 01:23:13 2014
[Thr 1812] Parameter system/type has value: "ABAP"
[Thr 1812] started security log to file ./dev_icm_sec
[Thr 1812] ICM running on:
[Thr 1812] MtxInit: 30001 0 2
[Thr 1812] ***LOG IM1=> IcmInit, Startup (ICM&SAPERP.CORP.CANSEL.CA&5940&) [icxxman.c 1934]
[Thr 1812] IcmInit: listening to admin port: 65000
[Thr 1812] DpSysAdmExtCreate: ABAP is active
[Thr 1812] DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
[Thr 1812] DpIPCInit2: read dp-profile-values from sys_adm_ext
[Thr 1812] DpShMCreate: sizeof(wp_adm) 42864 (2256)
[Thr 1812] DpShMCreate: sizeof(tm_adm) 5517056 (27448)
[Thr 1812] DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
[Thr 1812] DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
[Thr 1812] DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
[Thr 1812] DpShMCreate: sizeof(comm_adm) 1384080 (2744)
[Thr 1812] DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
[Thr 1812] DpShMCreate: sizeof(slock_adm) 0 (296)
[Thr 1812] DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
[Thr 1812] DpShMCreate: sizeof(file_adm) 0 (80)
[Thr 1812] DpShMCreate: sizeof(vmc_adm) 0 (2160)
[Thr 1812] DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
[Thr 1812] DpShMCreate: sizeof(gw_adm) 48
[Thr 1812] DpShMCreate: sizeof(j2ee_adm) 3952
[Thr 1812] DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000022F0050, size: 7174832)
[Thr 1812] DpShMCreate: allocated sys_adm at 00000000022F0060
[Thr 1812] DpShMCreate: allocated wp_adm_list at 00000000022F30B0
[Thr 1812] DpShMCreate: allocated wp_adm at 00000000022F32A0
[Thr 1812] DpShMCreate: allocated tm_adm_list at 00000000022FDA20
[Thr 1812] DpShMCreate: allocated tm_adm at 00000000022FDA70
[Thr 1812] DpShMCreate: allocated wp_ca_adm at 0000000002840980
[Thr 1812] DpShMCreate: allocated appc_ca_adm at 0000000002850390
[Thr 1812] DpShMCreate: allocated comm_adm at 000000000285FDA0
[Thr 1812] DpShMCreate: system runs without slock table
[Thr 1812] DpShMCreate: system runs without file table
[Thr 1812] DpShMCreate: allocated vmc_adm_list at 00000000029B1C40
[Thr 1812] DpShMCreate: system runs without vmc_adm
[Thr 1812] DpShMCreate: allocated gw_adm at 00000000029B1CF0
[Thr 1812] DpShMCreate: allocated j2ee_adm at 00000000029B1D30
[Thr 1812] DpShMCreate: allocated ca_info at 00000000029B2CB0
[Thr 1812] DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
[Thr 1812] MPI: dynamic quotas disabled.
[Thr 1812] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
[Thr 1812] CCMS: initialize CCMS Monitoring for ABAP instance with J2EE addin.
[Thr 1812] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
[Thr 1812] Fri May 16 01:23:14 2014
[Thr 1812] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
[Thr 1812] IcmCreateWorkerThreads: created worker thread 0
[Thr 1812] IcmCreateWorkerThreads: created worker thread 1
[Thr 1812] IcmCreateWorkerThreads: created worker thread 2
[Thr 6912] IcmProxyWatchDog: proxy watchdog started
[Thr 1812] IcmCreateWorkerThreads: created worker thread 3
[Thr 1812] IcmCreateWorkerThreads: created worker thread 4
[Thr 1812] IcmCreateWorkerThreads: created worker thread 5
[Thr 1812] IcmCreateWorkerThreads: created worker thread 6
[Thr 1812] IcmCreateWorkerThreads: created worker thread 7
[Thr 1812] IcmCreateWorkerThreads: created worker thread 8
[Thr 1812] IcmCreateWorkerThreads: created worker thread 9
[Thr 4024] IcmMpiWatchDogThread: MPI watchdog started
[Thr 4400] IcmWatchDogThread: watchdog started
[Thr 6524] HttpISubHandlerAdd: Added handler HttpFileAccessHandler(000000000C2E2750), slot=0, flags=4098) for /sap/public/icmandir/, active: 1, table 000000000C2E24C0
[Thr 6524] ISC: created 400 MB disk cache.
[Thr 6524] ISC: created 50 MB memory cache.
[Thr 6524] HttpISubHandlerAdd: Added handler HttpCacheHandler(000000000C3EB4B0), slot=1, flags=12293) for /, active: 1, table 000000000C2E24C0
[Thr 6524] HttpExtractArchive: files from archive E:\usr\sap\PRD\DVEBMGS00\exe/icmadmin.SAR in directory E:/usr/sap/PRD/DVEBMGS00/data/icmandir are up to date
[Thr 6524] HttpISubHandlerAdd: Added handler HttpAdminHandler(000000000C461480), slot=2, flags=36869) for /sap/admin, active: 1, table 000000000C2E24C0
[Thr 6524] HttpISubHandlerAdd: Added handler HttpModHandler(000000000C461570), slot=3, flags=12293) for /, active: 1, table 000000000C2E24C0
[Thr 6524] CsiInit(): Initializing the Content Scan Interface
[Thr 6524] PC with Windows NT (mt,unicode,SAP_CHAR/size_t/void* = 16/64/64)
[Thr 6524] CsiInit(): CSA_LIB = "E:\usr\sap\PRD\DVEBMGS00\exe\sapcsa.dll"
[Thr 6524] HttpISubHandlerAdd: Added handler HttpAuthHandler(000000000C4615F0), slot=4, flags=12293) for /, active: 1, table 000000000C2E24C0
[Thr 6524] HttpISubHandlerAdd: Added handler HttpSAPR3Handler(000000000C4AFAE0), slot=5, flags=1052677) for /, active: 1, table 000000000C2E24C0
[Thr 6524] Started service PORT=8000,PROT=HTTP,TIMEOUT=60,PROCTIMEOUT=60
[Thr 6524] Started service PORT=0,PROT=SMTP,TIMEOUT=120,PROCTIMEOUT=120
[Thr 6524] Fri May 16 01:23:18 2014
[Thr 6524] IcmNetCheck: network check passed without detecting problems
[Thr 4268] Fri May 16 01:23:24 2014
[Thr 4268] HttpExtractArchive: files from archive E:\usr\sap\PRD\DVEBMGS00\exe/ITS.SAR in directory E:/usr/sap/PRD/DVEBMGS00/data/icmandir are up to date
[Thr 8156] Fri May 16 01:24:14 2014
[Thr 8156] *** WARNING => IcmCallAllSchedules: Schedule func 1 already running - avoid recursion [icxxsched.c 481]
[Thr 5948] Fri May 16 01:24:24 2014
[Thr 5948] *** WARNING => IcmJ2EEScheduleFunc: Cannot access "/sap/public/icman" (rc=500)- please check node in TA sicf [icxxman.c 2598]
[Thr 6912] Fri May 16 01:24:44 2014
[Thr 6912] IcmProxyWatchDog: Shutdown request received
[Thr 4400] IcmWatchDogThread: Shutdown request received
[Thr 6912] *** IcmProxyWatchDog: exit thread ***
[Thr 4024] *** IcmMpiWatchDogThread: exit thread ***
[Thr 4400] *** IcmWatchDogThread: exit thread ***
[Thr 1812] IcmLoop: Shutdown request received
[Thr 1812] Deactivated service PORT=8000,PROT=HTTP,TIMEOUT=60,PROCTIMEOUT=60
[Thr 1812] Deactivated service PORT=0,PROT=SMTP,TIMEOUT=120,PROCTIMEOUT=120
[Thr 1812] Removed service PORT=8000,PROT=HTTP,TIMEOUT=60,PROCTIMEOUT=60
[Thr 1812] Removed service PORT=0,PROT=SMTP,TIMEOUT=120,PROCTIMEOUT=120
[Thr 1812] *** ICM shutdown completed (pid: 5940) *** -
ORA-27101: shared memory realm does not exist and ORA-01139: RESETLOGS
HI ALL,
After the oracle has installed on a solaries server successfully, i am unable to login into oracle database.
Below are the errors messages :
1) ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
2) Media recovery complete.
alter database open resetlogs
ERROR at line 1:
ORA-01139: RESETLOGS option only valid after an incomplete database recovery.
and When i try to login into oracle as root .
this is the error :
sqlplus / as sysdba
SQL*Plus: Release 10.2.0.4.0 - Production on Fri Feb 12 15:52:49 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
ld.so.1: oracle: fatal: libskgxp10.so: open failed: No such file or directory
ERROR:
ORA-12547: TNS:lost contact
my Operating system details :
SunOS Blade3-Chassis2 5.10 Generic_142900-03 sun4v sparc SUNW,Netra-CP3060
Anyone please help me here. waiting for your reply.
Below are the ORACLE_SID Details :
1) echo $ORACLE_SID ----- > ems
2)ps -eaf | grep smon -------> ora_smon_ems
do you need any data?
Edited by: user8959150 on Feb 11, 2010 7:19 PMHi
We mostly receive this error message ( ORA-27101: shared memory realm does not exist and ORA-01139)
When our SGA_MAX_SIZE is greater than 1.7 G.b on
You again configure your sga size
and sga_max_size paramete will not greater than 1.7 G.b
Hope your database will work correctly.
for test purpose you set all your init.ora parameter
db_cache_size=512m
db_keep_cache_size=64m
db_recycle_cache_size=16m
java_pool_size=8m
large_pool_size=16m
shared_pool_size=256m
shared_pool_reserved_size=64m
sga_max_size=1600m
sga_max_size will not be grater than combination of of db_cache_size db_keep_cache_size,db_recycle_cache_sizejava_pool_size+share_pool_size+share_pool_reserved_size
Hope it will work fine.
Regard
Abdul Hameed Malik
[email protected] -
FATAL: shared memory region is being held at - Error when installing SAP with sapinst
Hi guys
This error is kinda odd since i have installed 3 systems under the same OS/DB Conditions
Windows 2012 R2 with ASE 15.7.
14GB Memory
30GB PageFile
Firewall Off
On the previous two systems, when executing a System Copy using an Export File it completed with no problems.
On this System Installation, during ASE Server Setup, SAPINST fails, checking ASE logs it seems releted to memory, but I cant figure out what is the problem since 14GB would be enough, and it never happened on the previous installations.
Any idea what could be causing this?
init logs.
Finished loading file 'charset.loc'.
03/13/15 06:23:20 AM End output from 'charset'.
03/13/15 06:23:20 AM Character set 'utf8' has been successfully installed.
03/13/15 06:23:20 AM Task succeeded: install a character set(s).
03/13/15 06:23:20 AM Running task: set the default character set and/or default
sort order for the Adaptive Server.
03/13/15 06:23:20 AM Setting the default character set to utf8
03/13/15 06:23:20 AM Sort order 'binary' has already been installed.
03/13/15 06:23:21 AM SQL command: exec sp_configure 'default character set id',
190, binary
03/13/15 06:23:21 AM SQL command: exec sp_configure 'default sortorder id', 25,
utf8
03/13/15 06:23:21 AM Sort order 'binary' has been successfully set to the
default.
03/13/15 06:23:23 AM SQL command: shutdown
03/13/15 06:23:25 AM Waiting 15 seconds for the operating system to reclaim
resources before rebooting.
03/13/15 06:23:45 AM Calling the shell with
'"J:\sybase\AEC\ASE-15_0\bin\sqlsrvr.exe"
-d"J:\sybase\AEC\sybsystem\master.dat" -sAEC
-e"J:\sybase\AEC\ASE-15_0\install\AEC.log"
-i"J:\sybase\AEC\ini" -M"J:\sybase\AEC\ASE-15_0" '.
03/13/15 06:23:55 AM Calling the shell with '0 = return code.'.
03/13/15 06:24:11 AM Calling the shell with
'"J:\sybase\AEC\ASE-15_0\bin\sqlsrvr.exe"
-d"J:\sybase\AEC\sybsystem\master.dat" -sAEC
-e"J:\sybase\AEC\ASE-15_0\install\AEC.log"
-i"J:\sybase\AEC\ini" -M"J:\sybase\AEC\ASE-15_0" '.
03/13/15 06:24:11 AM waiting for server 'AEC' to boot...
03/13/15 06:24:21 AM SERVER ERROR: Failed to boot server 'AEC'.
03/13/15 06:24:21 AM SERVER ERROR: Couldn't reboot server 'AEC' after changing
internal tables.
03/13/15 06:24:25 AM CONNECTIVITY ERROR: Open Client message: 'ct_connect():
network packet layer: internal net library error: Net-Lib
protocol driver call to connect two endpoints failed
Failed to connect to the server - Error is 10061 No
connection could be made because the target machine
actively refused it.
03/13/15 06:24:25 AM CONNECTIVITY ERROR: Initialization of auditinit
connectivity module failed.
03/13/15 06:24:25 AM Task failed: set the default character set and/or default
sort order for the Adaptive Server. Terminating
configuration.
03/13/15 06:24:25 AM Configuration failed.
03/13/15 06:24:25 AM Exiting.
03/13/15 06:24:25 AM The log file for this session is
'J:\sybase\AEC\ASE-15_0\init\logs\log0313.007'.
03/13/15 06:24:25 AM Log close.
Install Log
00:0000:00000:00000:2015/03/13 06:24:13.07 kernel SySAM: Using licenses from: J:\sybase\AEC\\SYSAM-2_0\licenses\SYBASE.lic;J:\sybase\AEC\\SYSAM-2_0\licenses\SYBASE_ASE_DE.lic
00:0000:00000:00000:2015/03/13 06:24:13.70 kernel SySAM: Checked out license for 2 ASE_CORE (2020.1231/permanent/100C 0F04 3F88 1821).
00:0000:00000:00000:2015/03/13 06:24:13.70 kernel This product is licensed to: SAP, for use with SAP Business Applications.
00:0000:00000:00000:2015/03/13 06:24:13.70 kernel Checked out license ASE_CORE
00:0000:00000:00000:2015/03/13 06:24:13.70 kernel Adaptive Server Enterprise (Enterprise Edition)
00:0000:00000:00000:2015/03/13 06:24:13.71 kernel Using config area from primary master device.
00:0000:00000:00000:2015/03/13 06:24:13.71 kernel Warning: Using default file 'J:\sybase\AEC\AEC.cfg' since a configuration file was not specified. Specify a configuration file name in the RUNSERVER file to avoid this message.
00:0000:00000:00000:2015/03/13 06:24:13.73 kernel Allocating a shared memory segment of size 131137536 bytes.
00:0000:00000:00000:2015/03/13 06:24:13.73 kernel WARNING: shared memory segment is being held by another application
00:0000:00000:00000:2015/03/13 06:24:13.75 kernel FATAL: shared memory region is being held at 131104768 bytes but 131137536 bytes are required
00:0000:00000:00000:2015/03/13 06:24:13.75 kernel kbcreate: couldn't create kernel region.
00:0000:00000:00000:2015/03/13 06:24:13.75 kernel kistartup: could not create shared memory
Best
MartinAfter implementing solution in Note 2011550 - SYB: SAP ASE on Windows fails to start, issue was fixed
-
"shared memory realm" error -- cross-posted in "installation"
I've just installed 8.1.7 on a Solaris 8 workstation. The installation went fine up until the database creation assistant tried to create a database: it failed. But the software was all installed, so I did a "connect internal" and created a database myself. Once I start the database, I can connect as system/manager; but when the database is shutdown, connecting as system manager gives me an "Oracle not available" error (ORA-01034) followed by a "shared memory realm not available" error (ORA-27101) followed by a "no such file or directory" error (SVR4 Error: 2:).
All of the shared memory and semaphore parameters are specified in the /etc/system file, and they show up when I execute a "sysdef -i" command.
Any ideas why I'm getting these errors?
I did a search and found a few posts on "shared memory realm," but none of them seemed to address the fact that I can connect when the database is started/mounted, but not when it's shutdown.
Thanks in advance,
Richmake sure the env var ORACLE_SID is set.
check PROCESSES in your init.ora file. if you lower this number (to say, 15) and errors go away then you need to up the semiphores kernel parameter (or leave PROCESSES set to a low number). Also, it is correct to get an error when trying to connect to a database that is shutdown. the only way to not get an error is use svrmgrl or "sqlplus /nolog" and then connect / as sysdba (or connect internal).
Andrew -
CTM ERROR: ASA hardware accelerator init failed
Hi Guys, I have bought a refurbished firewall and upon reloading I see the following error from console. Is something that I can rectify?
Loading disk0:/asa904-k8.bin... Booting...
Platform ASA5510
Loading...
IO memory blocks requested from bigphys 32bit: 13264
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
Starting check/repair pass.
Starting verification pass.
/dev/hda1: 104 files, 12459/63613 clusters
dosfsck(/dev/hda1) returned 0
Processor memory 864026624, Reserved memory: 62914560
Total SSMs found: 0
Total NICs found: 7
mcwa i82557 Ethernet at irq 11 MAC: d0d0.fd1d.5d57
mcwa i82557 Ethernet at irq 5 MAC: 0000.0001.0001
i82547GI rev00 Gigabit Ethernet @ irq11 dev 1 index 05 MAC: 0000.0001.0002
i82546GB rev03 Ethernet @ irq09 dev 2 index 03 MAC: d0d0.fd1d.5d5b
i82546GB rev03 Ethernet @ irq09 dev 2 index 02 MAC: d0d0.fd1d.5d5a
i82546GB rev03 Ethernet @ irq09 dev 3 index 01 MAC: d0d0.fd1d.5d59
i82546GB rev03 Ethernet @ irq09 dev 3 index 00 MAC: d0d0.fd1d.5d58
Verify the activation-key, it might take a while...
Running Permanent Activation Key: 0x6122cb5d 0xc06c1a74 0xec92a120 0xbd44e8e8 0x8e372a8a
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 100 perpetual
Inside Hosts : Unlimited perpetual
Failover : Active/Active perpetual
Encryption-DES : Enabled perpetual
Encryption-3DES-AES : Enabled perpetual
Security Contexts : 2 perpetual
GTP/GPRS : Disabled perpetual
AnyConnect Premium Peers : 2 perpetual
AnyConnect Essentials : Disabled perpetual
Other VPN Peers : 250 perpetual
Total VPN Peers : 250 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
Cluster : Disabled perpetual
This platform has an ASA 5510 Security Plus license.
CTM ERROR: ASA hardware accelerator init failed, cause: boot_init completion timeout, ctm_nlite_boot_init:2284
CTM ERROR: ASA hardware accelerator init failed, cause: boot initialization failure, ctm_nlite_download:3342
CRYPTO ERROR: Microcode download failure, boot instance 0
Cisco Adaptive Security Appliance Software Version 9.0(4)
Thanks in advanceHi Mike,
Thanks for your reply. Considering it was at an early stage I had asked the supplier to replace it.
Regards
Stefan -
Ora.asm -init failed on second node root.sh
Hi All,
Installing Grid Infrastructure for a 11gr2 Cluster on two nodes Oracle Linux 5 + Vsware vSphere v4, shared disk on same host machine. When run root.sh, first node was success but the second node got following error message (actually the first node was cloned from the seoncd):
CRS-2672: Attempting to start 'ora.ctssd' on 'wandrac2'
Start action for octssd aborted
CRS-2676: Start of 'ora.ctssd' on 'wandrac2' succeeded
CRS-2672: Attempting to start 'ora.drivers.acfs' on 'wandrac2'
CRS-2672: Attempting to start 'ora.asm' on 'wandrac2'
CRS-2676: Start of 'ora.drivers.acfs' on 'wandrac2' succeeded
CRS-2676: Start of 'ora.asm' on 'wandrac2' succeeded
CRS-2664: Resource 'ora.ctssd' is already running on 'wandrac2'
CRS-4000: Command Start failed, or completed with errors.
Command return code of 1 (256) from command: /orapp/racsl/11.2.0/bin/crsctl start resource ora.asm -init
Start of resource "ora.asm -init" failed
Failed to start ASM
Failed to start Oracle Clusterware stack
Thanks in advance for any information and helps,Hi,
I came across this error and I am about to start a fresh installation of the grid. (ealier one failed because it was unable to read the memory in rac2 )
Is there anything specific I can change before I start my installation.
PS - I didnt get what exactly is going on with the hosts file.
My files are as follows :
RAC1 - etc/hosts
[oracle@falcen6a ~]$ cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
# Public
192.168.100.218 falcen6a.a.pri falcen6a
192.168.100.219 falcen6b.a.pri falcen6b
# Private
192.168.210.101 falcen6a-priv.a.pri falcen6a-priv
192.168.210.102 falcen6b-priv.a.pri falcen6b-priv
# Virtual
192.168.100.212 falcen6a-vip.a.pri falcen6a-vip
192.168.100.213 falcen6b-vip.a.pri falcen6b-vip
# SCAN
#192.168.100.208 falcen6-scan.a.pri falcen6-scan
#192.168.100.209 falcen6-scan.a.pri falcen6-scan
#192.168.100.210 falcen6-scan.a.pri falcen6-scan
on RAC2
[oracle@falcen6b ~]$ cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
#Public
192.168.100.218 falcen6a.a.pri falcen6a
192.168.100.219 falcen6b.a.pri falcen6b
# Private
192.168.210.101 falcen6a-priv.a.pri falcen6a-priv
192.168.210.102 falcen6b-priv.a.pri falcen6b-priv
# Virtual
192.168.100.212 falcen6a-vip.a.pri falcen6a-vip
192.168.100.213 falcen6b-vip.a.pri falcen6b-vip
# SCAN
#192.168.100.208 falcen6-scan.a.pri falcen6-scan
#192.168.100.209 falcen6-scan.a.pri falcen6-scan
#192.168.100.210 falcen6-scan.a.pri falcen6-scan
Can someone please confirm this?? -
Oracle not Available, Shared Memory realm doesn't exist
Hi,
I have problem during XE installation on Windows 2003 R2 SP 2 Enterprise edition. I have uninstall the oracle xe and the result still the same. Finally I uninstall the windows and start all over again, surprisingly the result still the same. FYI, we normally has no issue during installation because this is part of our system we sell to our customer which require oracle xe. This is the first time we have seen this issue.
ORA-01034 : Oracle Not available
ORA-27101 : Shared memory realm doesn't exist.
Oracle XE and listener services is started in the windows services.
if we try to do startup the following message occured.
SQL> connect /as sysdba
Connected to an idle instance.
SQL> startup
ORA-44412: XE edition memory parameter invalid or not specified
SQL>
I can send you the oracle_xe log, init ora, and OpsBuildAll.log to create the database.
When we compare with the working installation, we saw that the size of oraclexe folder is less, it's just 233MB while the working one is over 1GB. After investigation, found out that the .dbf files is not avaiable in the oradata folder, i have tried to copy those files from the working one but the problem stay the same, probably there are a lot of files more missing.
Appreciate your help on this.
Thanks,
AgusHi,
Please find the log below
SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\init.ora";
ORA-44412: XE edition memory parameter invalid or not specified
SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\rmanRestoreDatafiles.sql;
SQL> set echo off;
select TO_CHAR(systimestamp,'YYYYMMDD HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
declare
ERROR at line 1:
ORA-01034: ORACLE not available
select TO_CHAR(systimestamp,'YYYYMMDD HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
Connected to an idle instance.
SQL> spool C:\oraclexe\app\oracle\product\10.2.0\server\config\log\cloneDBCreation.log
I have css log as well if you are interesting to see.
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Tue Mar 20 14:13:29 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5308M/6133M, Ph+PgF:7152M/8000M, VA:1933M/2047M
Tue Mar 20 14:13:29 2012
Starting ORACLE instance (normal)
Tue Mar 20 14:13:30 2012
Starting ORACLE instance (normal)
Tue Mar 20 14:13:31 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Tue Mar 20 19:43:31 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5351M/6133M, Ph+PgF:7150M/8000M, VA:1932M/2047M
Tue Mar 20 19:43:31 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Tue Mar 20 19:55:39 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5254M/6133M, Ph+PgF:7052M/8000M, VA:1932M/2047M
Tue Mar 20 19:55:39 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 05:23:41 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5259M/6133M, Ph+PgF:6894M/8000M, VA:1932M/2047M
Wed Mar 21 05:23:41 2012
Starting ORACLE instance (normal)
Wed Mar 21 05:29:12 2012
Starting ORACLE instance (normal)
Wed Mar 21 05:31:42 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 05:50:45 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5143M/6133M, Ph+PgF:6768M/8000M, VA:1932M/2047M
Wed Mar 21 05:50:45 2012
Starting ORACLE instance (normal)
Wed Mar 21 06:02:38 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 06:04:03 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5205M/6133M, Ph+PgF:6866M/8000M, VA:1944M/2047M
Wed Mar 21 06:04:03 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 06:06:00 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5195M/6133M, Ph+PgF:6837M/8000M, VA:1944M/2047M
Wed Mar 21 06:06:00 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 06:06:11 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5195M/6133M, Ph+PgF:6836M/8000M, VA:1944M/2047M
Wed Mar 21 06:06:11 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 06:06:40 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5191M/6133M, Ph+PgF:6832M/8000M, VA:1944M/2047M
Wed Mar 21 06:06:40 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 06:07:18 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5191M/6133M, Ph+PgF:6831M/8000M, VA:1932M/2047M
Wed Mar 21 06:07:18 2012
Starting ORACLE instance (normal)
Wed Mar 21 06:07:38 2012
Shutting down instance (abort)
Wed Mar 21 06:07:51 2012
Starting ORACLE instance (normal)
Wed Mar 21 06:13:31 2012
Starting ORACLE instance (normal)
I have finished installing the XE on windows but result is the same, dbf file is not created on oradata folder.
Thanks,
Agus -
ORA-01034: ORACLE not available ORA-27101: shared memory realm does not exi
Hi all,
suddenly our oracle 10g database stopped working. When we tried export the database following was the output
C:\Documents and Settings\Administrator>EXP PMIS/PMIS FILE=C:\PMIS.DMP
Export: Release 10.2.0.1.0 - Production on Wed Mar 25 16:15:08 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
EXP-00056: ORACLE error 1034 encountered
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
EXP-00005: all allowable logon attempts failed
EXP-00000: Export terminated unsuccessfullyalert log file had the output as
Wed Mar 25 16:02:12 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:>sessions = 49
>__shared_pool_size = 71303168
>__large_pool_size = 8388608
>__java_pool_size = 4194304
>__streams_pool_size = 0
>spfile = C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
>sga_target = 146800640
>control_files = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
>__db_cache_size = 58720256
>compatible = 10.2.0.1.0
>db_recovery_file_dest = C:\oraclexe\app\oracle\flash_recovery_area
>db_recovery_file_dest_size= 10737418240
>undo_management = AUTO
>undo_tablespace = UNDO
>remote_login_passwordfile= EXCLUSIVE
>dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
>shared_servers = 4
>job_queue_processes = 4
>audit_file_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
>background_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
>user_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
>core_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
>db_name = XE
>open_cursors = 300
>os_authent_prefix =
>pga_aggregate_target = 41943040
PMON started with pid=2, OS id=1632
PSP0 started with pid=3, OS id=1312
MMAN started with pid=4, OS id=200
DBW0 started with pid=5, OS id=1864
LGWR started with pid=6, OS id=188
CKPT started with pid=7, OS id=1328
SMON started with pid=8, OS id=1848
RECO started with pid=9, OS id=1760
CJQ0 started with pid=10, OS id=1920
MMON started with pid=11, OS id=768
MMNL started with pid=12, OS id=948
Wed Mar 25 16:02:13 2009
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Wed Mar 25 16:02:13 2009
alter database mount exclusive
Wed Mar 25 16:02:17 2009
Setting recovery target incarnation to 2
Wed Mar 25 16:02:17 2009
Successful mount of redo thread 1, with mount id 2563569989
Wed Mar 25 16:02:17 2009
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Wed Mar 25 16:02:17 2009
alter database open
Wed Mar 25 16:02:18 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_lgwr_188.trc:
ORA-00600: internal error code, arguments: [3700], [1], [15], [2], [2], [], [], []
Wed Mar 25 16:02:18 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_lgwr_188.trc:
ORA-00600: internal error code, arguments: [3700], [1], [15], [2], [2], [], [], []
Wed Mar 25 16:02:18 2009
LGWR: terminating instance due to error 470
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_dbw0_1864.trc:
ORA-00470: LGWR process terminated with error
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_ckpt_1328.trc:
ORA-00470: LGWR process terminated with error
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_psp0_1312.trc:
ORA-00470: LGWR process terminated with error
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mman_200.trc:
ORA-00470: LGWR process terminated with error
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_pmon_1632.trc:
ORA-00470: LGWR process terminated with error
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_reco_1760.trc:
ORA-00470: LGWR process terminated with error
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_smon_1848.trc:
ORA-00470: LGWR process terminated with error
Instance terminated by LGWR, pid = 188Again when we tried by connecting sqlplus following was output
SQL> connect sys/manager as sysdba
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 146800640 bytes
Fixed Size 1286220 bytes
Variable Size 83890100 bytes
Database Buffers 58720256 bytes
Redo Buffers 2904064 bytes
Database mounted.
ORA-03113: end-of-file on communication channelWe actually need database dump for user PMIS, any help would be highly appreciatedHi Wim
You should say that "It may be Control File problem", but you shouldn't say that "it's due to Control File" problem
Please refer to Errors Documentation for more information on ORA-00600
http://download.oracle.com/docs/cd/B19306_01/server.102/b14219/e0.htm#sthref371
ORA-00600: internal error code, arguments: [string], [string], [string], [string], [string], [string], [string], [string]
Cause: This is the generic internal error number for Oracle program exceptions. This indicates that a process has encountered an exceptional condition.
Action: Report as a bug - the first argument is the internal error number
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com -
ORA-27101: shared memory realm does not exist
Hi all
I have a problem related to sap xi-7.0 server.
when I start server than dispature is not started . and the trans file show these problem , i am past the this trans file ,
so plz solve this problem,
4 ETW000 R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 20.02.2009 - 01:11:50
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Fri Feb 20 01:11:52 2009 3963 0.003963
4 ETW000 [dev trc ,00000] db_con_init called 710 0.004673
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 188 0.004861
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 71 0.004932
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 74699 0.079631
4 ETW000 [dev trc ,00000] using "D:\usr\sap\D10\SYS\exe\uc\NTI386\dboraslib.dll"
4 ETW000 75 0.079706
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 19 0.079725
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 22 0.079747
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "700.08", patchlevel (0.73)
4 ETW000 5493 0.085240
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 42 0.085282
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 91 0.085373
4 ETW000 [dev trc ,00000] New connection 0 created 59 0.085432
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 32 0.085464
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 43 0.085507
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 17 0.085524
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 21 0.085545
4 ETW000 [dev trc ,00000] CLIENT_ORACLE_HOME is not set as environment variable or
4 ETW000 DIR_CLIENT_ORAHOME is not set as profile parameter.
4 ETW000 assuming using instant client with unspecified location.
4 ETW000 9668 0.095213
4 ETW000 [dev trc ,00000] Fri Feb 20 01:11:54 2009 1849124 1.944337
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.1.0' 58 1.944395
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 23 1.944418
4 ETW000 [dev trc ,00000] Fri Feb 20 01:11:55 2009 511982 2.456400
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 59 2.456459
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 18 2.456477
4 ETW000 [dev trc ,00000] Connecting as /@D10 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
4 ETW000 44 2.456521
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 39103 2.495624
4 ETW000 [dev trc ,00000] 0 UTF8 1 0241DCB8 024231EC 02422A74
4 ETW000 31 2.495655
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 31702 2.527357
4 ETW000 [dev trc ,00000] Allocating server context handle 47 2.527404
4 ETW000 [dev trc ,00000] Attaching to DB Server D10 (con_hdl=0,svchp=024229C0,svrhp=02434234)
4 ETW000 230 2.527634
4 ETW000 [dev trc ,00000] Fri Feb 20 01:12:01 2009 5281432 7.809066
4 ETW000 [dev trc ,00000] Assigning server context 02434234 to service context 024229C0
4 ETW000 67 7.809133
4 ETW000 [dev trc ,00000] Allocating user session handle 56 7.809189
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=024229C0,srvhp=02434234,usrhp=0246F9C8)
4 ETW000 2370 7.811559
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
4 ETW000 656067 8.467626
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=1,svrhp=02434234) 16 8.467642
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=024229C0,srvhp=02434234)
4 ETW000 19 8.467661
4 ETW000 [dev trc ,00000] Deallocating server context handle 02434234 23932 8.491593
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1034'
4 ETW000 64 8.491657
4 ETW000 [dev trc ,00000] Try to connect with default password 83 8.491740
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@D10 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
4 ETW000 21 8.491761
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 21 8.491782
4 ETW000 [dev trc ,00000] 0 UTF8 1 0241DCB8 024231EC 02422A74
4 ETW000 21 8.491803
4 ETW000 [dev trc ,00000] Allocating server context handle 48 8.491851
4 ETW000 [dev trc ,00000] Attaching to DB Server D10 (con_hdl=0,svchp=024229C0,svrhp=02434234)
4 ETW000 35 8.491886
4 ETW000 [dev trc ,00000] Fri Feb 20 01:12:02 2009 458152 8.950038
4 ETW000 [dev trc ,00000] Assigning server context 02434234 to service context 024229C0
4 ETW000 56 8.950094
4 ETW000 [dev trc ,00000] Assigning username to user session 0246F9C8 17 8.950111
4 ETW000 [dev trc ,00000] Assigning password to user session 0246F9C8 35 8.950146
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=024229C0,srvhp=02434234,usrhp=0246F9C8)
4 ETW000 24 8.950170
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
4 ETW000 234917 9.185087
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=1,svrhp=02434234) 799 9.185886
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=024229C0,srvhp=02434234)
4 ETW000 42 9.185928
4 ETW000 [dev trc ,00000] Deallocating server context handle 02434234 1364 9.187292
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1034'
4 ETW000 61 9.187353
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 1034 performing CON [dblink#3 @ 431]
4 ETW000 10170 9.197523
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-01034: ORACLE not available 49 9.197572
4 ETW000 ORA-27101: shared memory realm does not exist [dblink#3 @ 431]
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'D10'"Hello Pankaj,
Try starting Oracle database from SQL plus using orasid as user and then start SAP
Refer to Note 491174 and perform all the tests as mentioned
You will be able to solve it
Let me know if it helps
Rohit -
ORA-27101: shared memory realm does not exist urgent cannot connect
Hi i can't succeed connectivity test with netmgr
Initializing first test to use userid: scott, password: tiger
Attempting to connect using userid: scott
The test did not succeed.
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
There may be an error in the fields entered,
or the server may not be ready for a connection.
Here is what i get from tcpdump:
0x00a0: 5241 2d30 3130 3334 3a20 4f52 4143 4c45 RA-01034:.ORACLE
0x00b0: 206e 6f74 2061 7661 696c 6162 6c65 0a4f .not.available.O
0x00c0: 5241 2d32 3731 3031 3a20 7368 6172 6564 RA-27101:.shared
0x00d0: 206d 656d 6f72 7920 7265 616c 6d20 646f .memory.realm.do
0x00e0: 6573 206e 6f74 2065 7869 7374 0a4c 696e es.not.exist.Lin
0x00f0: 7578 2045 7272 6f72 3a20 323a 204e 6f20 ux.Error:.2:.No.
0x0100: 7375 6368 2066 696c 6520 6f72 2064 6972 such.file.or.dir
0x0110: 6563 746f 7279 0a ectory.
Here an attempt with sqlplus that didn't work
sqlplus scott/tiger@CHUCKY
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Mar 29 17:05:03 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Another attempt with sqlplus that succeed i dunno why
oracle@debian:~$ sqlplus scott/tiger
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Mar 29 17:06:02 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL>
Can someone help me to understand what is wrong please?user499283 wrote:
Well I don't understand exactly what you mean
here is the listener status
SNRCTL for Linux: Version 10.2.0.1.0 - Production on 29-MAR-2006 18:24:33
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=debian)(PORT=1521)))
Services Summary...
Service "CHUCKY" has 1 instance(s).
Instance "CHUCKYSON", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:3 refused:0
LOCAL SERVER
Service "chucky.rss-global.com" has 1 instance(s).
Instance "CHUCKY", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "chuckyXDB.rss-global.com" has 1 instance(s).
Instance "CHUCKY", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: debian, pid: 11725>
(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=49930))
Service "chucky_XPT.rss-global.com" has 1 instance(s).
Instance "CHUCKY", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
The command completed successfully
I dont know if it is a good thing i copy an init.ora file to initCHUCKY.ora and now database is using it I have just changed some values in it like control files dbname ... that were pointing to another database maybe this is why i dont manage to get this database runing.
Now i am stucked I dunno what to do
racle@debian:~$ tnsping chucky
TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 29-MAR-2006 18:27:45
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/home/oracle/u01/app/oracle/oracle/product/10.2.0/db_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = debian)(PORT = 1521))) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = CHUCKY)) (HS = OK))
OK (0 msec)
I am so new to it as i understand the listener is working if i beliave what reports tnsping
As I understand the database is started
SQL> startup
ORACLE instance started.
Total System Global Area 167772160 bytes
Fixed Size 1218316 bytes
Variable Size 62916852 bytes
Database Buffers 100663296 bytes
Redo Buffers 2973696 bytes
Database mounted.
Database opened.
As Inunderstand it is listeneing on 1521
netstat -anp | grep 1521
tcp 0 0 0.0.0.0:1521 0.0.0.0:* LISTEN 11762/tnslsnr
tcp 0 0 127.0.0.1:46370 127.0.0.1:1521 ESTABLISHED11703/ora_pmon_CHUC
tcp 0 0 127.0.0.1:1521 127.0.0.1:46370 ESTABLISHED11762/tnslsnr
unix 2 [ ] DGRAM 43990 11521/su
I made a tcpdump i saw the data is comong on localhost port 1521
Synthese I think the listener is runing, the database too, it is making a listen on 1521 port , when I try to connect data arrives on the right interface.
But I can't login by
sqlplus scott/tiger@CHUCKY
qlplus SCOTT/tiger@CHUCKY
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Mar 29 18:32:49 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
I dunno what is this fuckin shared memoryThis fuckin shared memory is how oracle does interprocess communication. When you connect to Oracle, you have to connect to this area. If you tell it the wrong area, it won't find it. You can see the areas with the ipcs command on the server. Since you can connect locally, but can't connect remotely, there is something wrong with how you told Oracle to connect remotely. Remotely can be on the same host if you have an @ in the connect string.
>
env | grep ORACLE
ORACLE_SID=CHUCKY
ORACLE_BASE=/home/oracle
ORACLE_HOME=/home/oracle/u01/app/oracle/oracle/product/10.2.0/db_1/
seems like my variables are good.
Well I dunno what to do I didn't think getting a simple login locally over tcp/ip would be so difficult, I am afraid of what will happen after this will work :) As it should be one of the easiest things on oracle what about the hardest :)Well, first try removing the trailing slash from ORACLE_HOME everywhere, including if you have it in the listener.ora. Then compare the tnsnames.ora ORACLE_HOME with your environment ORACLE_HOME. In fact, if you have a listener.ora, try renaming it to something else and restarting the listener.
That error is normally due to a bad ORACLE_HOME or ORACLE_SID. Since your tnsping works, that indicates the ORACLE_HOME is good. But all that tells you is that the listener responds. Other causes may be inadequate processes in init.ora or case issues with the sid, or just generally not following the installation instructions. But are there installation instructions for debian?
With multiple databases on one host, some kernel parameters may need to be increased. -
ORA-27101: shared memory realm does not exist after kernel upgrade
Hi,
I have installed ECC 6.0 on windows 32 bit. After I upgraded the kernel, the database can't be started as well as SAP. When I checked the logs, the error ORA-27101: shared memory realm does not exist was encountered.
M calling db_connect ...
C Prepending E:\usr\sap\ERP\DVEBMGS01\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@ERP on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06E217E8 06E26D84 06E2660C
C Attaching to DB Server ERP (con_hdl=0,svchp=06E26558,srvhp=06E38144)
C Starting user session (con_hdl=0,svchp=06E26558,srvhp=06E38144,usrhp=06E4CEB8)
C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1034
[dboci.c 4532]
C Detaching from DB Server (con_hdl=0,svchp=06E26558,srvhp=06E38144)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 11042]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@ERP on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06E217E8 06E26D84 06E2660C
C Attaching to DB Server ERP (con_hdl=0,svchp=06E26558,srvhp=06E38144)
C Starting user session (con_hdl=0,svchp=06E26558,srvhp=06E38144,usrhp=06E4CEB8)
C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1034
[dboci.c 4532]
C Detaching from DB Server (con_hdl=0,svchp=06E26558,srvhp=06E38144)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 11042]
B ***LOG BV3=> severe db error 1034 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error 1034 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10283]
M
Please help.
Thanks.
Regards.Hi. First restart the server, then start the LISTENER, and repeat startsap again. Check if messages repeated. Regards.
Maybe you are looking for
-
Can't sync photos to iPod Touch
Downloaded 4.3 to my iPod Touch today. I'm running 10.5.8 on my MacBook. Now it won't sync with iPhoto. I keep getting the message, IPod "Touch" cannot be synced. The required file can't be found. I don't know what this means or what file it can't fi
-
Socket Exception in Admin Server Logs
Hi All, We are facing a socket exception in Admin Server log. PFB for the exception logs: [2011-12-26T00:36:21.793-06:00] [AdminServer] [WARNING] [] [oracle.adfinternal.view.faces.renderkit.rich.TreeRendererUtils] [tid: [ACTIVE].ExecuteThread: '44' f
-
Loading resources via classpath
My application should load resources (as XML files) from the ClassLoader. For example, this code fragment should load the file "constantes.xml" if it is on the claspath: ClassLoader cl = ClassLoader.getSystemClassLoader(); InputStream recurso = cl.ge
-
I have a report that is printing out a series of barcode sheets. I need for the barcode image to be centered on the page each time it prints, but the problem is that the item will vary in size from page to page, depending upon the actual value behind
-
How to Activate component is Support Message
Dear Friends, Path: Support Message -> Transaction Data -> SAP Attributes-> Component Field, press F4 in the F4 I will get list of components. But for ' MM Material Management' its Grey. If I select MM, system gives error"Software component PP not av