FMS4 Sample player RTMP fails but HTTP works

FMS4: localhost or localhost:8134 the same:
For the Stream Video (RTMP) I cannot connect; but using the PLAY VIDEO(HTTP) is fine.
RTMP show: "we are unable to connect to the content you've requested...."
Currently config enabled HTTP Proxy and allow all in/outbound connection in windows 7 firewall.
BTW, this is for the samples;  the "dynamic stream" and "interactive" are all fine.
Any idea?
Thanks!

I installed FMS4 on my Windows 7 machine. And for me everything is working fine. Is it like just after completing the installation, when it opens index.html then sample play for rtmp is not working?
Have you tried playing other videos using rtmp?  

Similar Messages

  • Pkgrepo fails over HTTP, works on NFS

    Hello everyone,
    I am trying to set up a local copy of solaris 11 x64 packages, so have downloaded, concatenated and unpacked the repo ISOs in a folder on a Linux box, thinking it would be a simple matter of making the files available under Apache's root. pkgrepo seems to think otherwise though, as it makes a request for a non-existent file then fails:
    root@sol11:~# pkgrepo info -s http://linuxbox/pub/sol11/repo/
    pkgrepo: http protocol error: code: 404 reason: Not Found
    request is for "GET /pub/sol11/repo/versions/0/ HTTP/1.1" which is very much not there.
    I did triplecheck the ISOs, no files are missing. Also, when exporting the same folder from linuxbox over NFS:
    /repo on linuxbox:/mnt/sol11/repo remote/read/write/setuid/devices/rstchown/xattr/dev=8b00004
    pkgrepo info -s /repo/
    PUBLISHER PACKAGES STATUS UPDATED
    solaris 4292 online 2012-09-04
    All is fine, i can install packages etc.
    Any clue on what breaks it when specifying a HTTP source?

    NM, figured it out. Creating a working repo seems to require a Solaris box, from which I mounted the NFS share of the Linux box, unpacked the ISOs on it, linked the foldr in the webroot, and
    pkgrepo create /repo (the NFS mount point)
    pkgrecv -s http://pkg.oracle.com/solaris/release/ -d /repo/ '*' (d/l all available updates)
    pkgrepo -s /repo refresh
    pkg set-publisher -G '*' -M '*' -g http://linuxbox/sol11/repo/ solaris

  • [SOLVED] make fails but makepkg works fine (when building zathura git)

    Hello,
    when I build the "zathura-girara-git" AUR package with makepkg everything works fine, but if I try to build zathura after cloning the git repo make fails with some errors.
    make output from makepkg:
    zathura build options:
    CFLAGS = -march=native -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -std=c99 -pedantic -Wall -Wno-format-zero-length -Wextra -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng14
    LIBS = -lgirara-gtk2 -pthread -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lcairo -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0 -ldl -lpthread -lm
    DFLAGS = -g
    CC commands.c
    CC = cc
    CC document.c
    CC render.c
    CC zathura.c
    CC completion.c
    CC bookmarks.c
    CC utils.c
    CC shortcuts.c
    CC config.c
    CC callbacks.c
    CC print.c
    CC database-plain.c
    CC -o zathura
    installing executable file
    installing header files
    installing manual pages
    which: no rst2man in (/usr/lib/ccache/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/usr/bin/vendor_perl:/usr/bin/core_perl:/usr/local/bin/:/home/bexie/bin)
    installing desktop file
    installing pkgconfig file
    make output:
    zathura build options:
    CFLAGS = -std=c99 -pedantic -Wall -Wno-format-zero-length -Wextra -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng14
    LIBS = -lgirara-gtk2 -pthread -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lcairo -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0 -lsqlite3 -ldl -lpthread -lm
    DFLAGS = -g
    CC = cc
    CC commands.c
    In file included from commands.c:3:0:
    commands.h:7:20: fatal error: girara.h: No such file or directory
    compilation terminated.
    make: *** [commands.o] Error 1
    I tried exporting the enviroment variables from /etc/makepkg.conf, to no avail. I also tried adding the girara include files to CFLAGS, but it throws the same kind of error about some gtk dependency.
    I don't know if this is a general issue, but as I can compile it through makepkg I don't think this is due to zathura.
    Does anyone have a clue on what could be wrong here?
    Last edited by donbex (2012-01-22 12:56:59)

    In the PKGBUILD, they are cloning the repo by doing :
    _gitroot="git://pwmt.org/zathura.git"
    _gitname="zathura"
    git clone $_gitroot
    cd $_gitname && git checkout --track -b develop origin/develop
    Are you doing the same ?

  • Flash Player X installed but not working (6MB file instead of 15MB)

    I installed version 11 Active X 11.5.502.135 BUT it is only  6MB file and should be 15MB so it does not play videos. It did not hang up during installation (download timeout) but went right ahead and installed but it cannot be the full deal. I have unistalled older versions and started fresh but no go. Can anyone help please?

    Thanks for looking at my problem Pat.
    1) In the list of programs in the control panel. The Flash Player file
    is 6MB but in the Adobe site
    download button it says the file size is 15MB.
    /Name/___/  Publisher Installed        Size             Version/_
    Adobe Flash Player 11 ActiveX        Adobe Systems Inc. 12/11/2012   
    6MB       11.5.502.135
    I thought maybe it is only partially downloaded or partially installed.
    2) I should say nothing plays. I get this screen always:
    The Adobe Flash Player is required for video playback.
    Get the latest Flash Player <http://get.adobe.com/flashplayer/>
    What do you think?
    Thanks again,
    Dave Dawson

  • Flash player saying installed but doesnt work

    i have a toshiba laptop with internet explorer 6 and its an
    xp machine
    basically some websites that need flash redirect me to the
    adobe flash player site and i click install and it installs.
    then an animation plays when its successfully installed
    but then when i go back to the website that requires
    flash...flash doesnt work!
    im going crazzy now cos no-one knows what to do.
    any suggestions. any???? xx

    Well, first of all you might want to get IE7. Just go to
    filehippo.com. In any case, go to start>control
    panel>internet options. Go to the security tab and set the
    internet zone to default>apply. Then go to the privacy tab and
    click on sites. Make sure the website is allowed to set cookies.
    Then set the cookie slider to medium or medium-high. This internet
    options screen is different for IE6 and IE7, so your buttons may
    vary slightly from mine since I have IE7. Really, IE7 is better in
    my opinion and your favorites will carry over.

  • Safari fails but Opera works

    I am trying to reach a web site using Safari on my iPhone 3GS, but it fails to connect (although it worked a month or so ago). When I try to reach the same web site using the Opera app it successfully connects.
    Any ideas as to why and how to get Safari working? Updating OS didn't help.
    iPhone 3GS 16GB
    iOS 4.2.1
    Thanks!
    SP

    try
    document.myform.myelement
    forms[0] returns the first form on the html page.
    so forms[0].myform is duplication - looking for the form twice.
    When debugging javascript, I would suggest writing into the address bar like this:
    javascript:alert(document)
    javascript:alert(document.myform)
    javascript:alert(document.myform.myelement)
    It executes the javascript directly from the address bar. Building up the javascript expression, you can see where you take a "wrong turn"
    Hope this helps,
    evnafets

  • My flash player is installed but not working?

    I have the Adobe Flash Player 9.0 Installed, but when i open
    games that require it. They say i don't have Flash 8.0 or higher
    would i like to install, I then hit yes and it gets 1/4 of the way
    through stops and says i don't have access to install it goto the
    website and install it. I've done that and it's installed
    completely. Help?

    James j,
    You have a different problem. Your screenshot shows "The Adobe Flash plugin has crashed".
    See [[Plugin crash reports]] and [[The adobe Flash plugin has crashed]]. If you need more help you should [[ask a question|ask a new question]] (start a new thread).

  • Flas player 11 installed but not working

    the adobe flash player 11 was just installed but i can not use it for games or videos what can i do?

    Without any more info than that, it's really anybody's guess.
    What OS and what browser do you use?

  • Wifi setup: wifi-menu fails but wpa_supplicant works

    Guys,
    I've installed archlinux for the first time, and I'm mighty pleased. I've been following the installation guides, and have run into a slightly annoying issue.
    When I try to setup my wifi(WPA) with "wifi-menu", I end up with "CONNECTION FAILED" error message. The steps I'm following are.
    # wifi-menu
         In ncurses
        1. choose the SSID
        2. Enter the password
        Result - CONNECTION FAILED
    However, running wpa_supplicant command from commandline works well.
    # wpa_supplicant -B -i wlp3s0 -c <(wpa_passphrase "ssid" "password")
    .. works!
    So, wifi drivers are properly loaded for sure. I believe that wifi-menu internally uses wpa_supplicant. Why would "wifi-menu" command fail? Ultimately I want to use netctl profiles to automatically enable the wifi rather than manually enabling wi-fi every time. Any ideas?

    @luisgmarine, I have tried it with and without the single quotes -- no difference. Thanks for the idea though.
    @progandy, Interesting. I'm not sure how to figure out if it's an issue with the router communication or not, though.
    Anyway, thanks for the ideas and thoughts. I'll mark this as solved, because it is working; I was just curious to see if there was an apparent explanation.

  • N73 firmware update failed but still working?

    Few days ago I saw new firmware for N73 is out. Downloaded program, stared to update firmware.
    After cca. 90% of progress bar I heard same sound you hear every time you plug in/out your phone over USB cable. My heart almost stopped since I heard stories you must not unplug phone during firmware update, that it will not work after that. Suprisingly software offered me to repeat update process!
    I clicked OK and it started all over again.
    Once again after reaching about 90% progress bar instalation stopped with same un plugg sound. This time there was no repeat update offer. I tryed everything but update din't work.
    I plugged USB out of comp and phone and tryed to turn on phone. I wasn't able to turn in on! Then I took out battery, put it back in and turned on phone.
    All worked, menu was in english, but I had option to change it back to croatian again. Installed old programs and they all worked. Voice dialing working, camera working... all working.
    What the hell happened?
    Why installation stopped on 90% and my phone is working without problems on NEW firmware? Bug in Nokia Firmware update software?

    I've understood it's quite normal that the update prosedure may seem to stop even for some minutes and then go on again. The connection between the phone and computer will also break and then reconnect couple of times...
    Are you sure, you did wait long enough before unplugging your phone (at least some minutes)?
    But if your phone has the new firmware now and everything is working fine so I hope there is no problem!
    Nokia N97 v. 12.0.024

  • Flash player is updated but wont work??

    Flash Version: 15.0.0
    Browser Name: Internet Explore
    Operating System: Windows (Windows 8)
    I've done every thing the trouble shooting says to do and it still says to check flash player?

    Flash Player wouldn't throw a "you need a codec" message.  Something else is up.
    I'd start by running a reputable antivirus and anti-malware scanner.
    http://www.malwarebytes.org is free and well respected, as is Windows Defender: Turn Windows Defender on or off - Windows Help

  • NETWORK marked [FAIL] but works...

    Hi everyone,
    Recently, during boot, network is marked as failed but everyhting works properly... This only happens with wireless connection (ipw2100), ethernet is marked [DONE] and works too 
    Thanks in advance for any advice...
    Cheers

    I'm not sure if I completely understand your post, but if you have multiple network interfaces and one fails, then network shows fail even if others were successful. There's a bug report filed about it, but it's been quite a while without being fixed...
    And if that doesn't answer your question then ignore me.

  • [solved] Owncloud over SSL: http works, but over https only apache

    Hello,
    I try to setup owncloud with SSL.
    Accessing over http works, but over https, I reach the default apache page instead of the owncloud page.
    (I set up SSL according to https://wiki.archlinux.org/index.php/LAMP#SSL )
    How could I make the owncloud site available over https?
    relevant files:
    owncloud.conf:
    <IfModule mod_alias.c>
    Alias /owncloud /usr/share/webapps/owncloud/
    </IfModule>
    <Directory /usr/share/webapps/owncloud/>
    Options FollowSymlinks
    Require all granted
    php_admin_value open_basedir "/srv/http/:/home/:/tmp/:/usr/share/pear/:/usr/share/webapps/owncloud/:/etc/webapps/owncloud/:/mt/daten/owncloud/"
    </Directory>
    <VirtualHost *:80>
    ServerAdmin [email protected]
    DocumentRoot /usr/share/webapps/owncloud
    ServerName http://example.com/owncloud
    </VirtualHost>
    I tried to change 80 to 443, but then, systemctl restart httpd didn't work. (apache failed)
    httpd.conf:
    # This is the main Apache HTTP server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
    # In particular, see
    # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
    # for a discussion of each configuration directive.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "logs/access_log"
    # with ServerRoot set to "/usr/local/apache2" will be interpreted by the
    # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
    # will be interpreted as '/logs/access_log'.
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # Do not add a slash at the end of the directory path. If you point
    # ServerRoot at a non-local disk, be sure to specify a local disk on the
    # Mutex directive, if file-based mutexes are used. If you wish to share the
    # same ServerRoot for multiple httpd daemons, you will need to change at
    # least PidFile.
    ServerRoot "/etc/httpd"
    # Mutex: Allows you to set the mutex mechanism and mutex file directory
    # for individual mutexes, or change the global defaults
    # Uncomment and change the directory if mutexes are file-based and the default
    # mutex file directory is not on a local disk or is not appropriate for some
    # other reason.
    # Mutex default:/run/httpd
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses.
    #Listen 12.34.56.78:80
    Listen 80
    <IfModule mod_ssl.c>
    Listen 443
    </IfModule>
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    LoadModule authn_file_module modules/mod_authn_file.so
    #LoadModule authn_dbm_module modules/mod_authn_dbm.so
    #LoadModule authn_anon_module modules/mod_authn_anon.so
    #LoadModule authn_dbd_module modules/mod_authn_dbd.so
    #LoadModule authn_socache_module modules/mod_authn_socache.so
    LoadModule authn_core_module modules/mod_authn_core.so
    LoadModule authz_host_module modules/mod_authz_host.so
    LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
    LoadModule authz_user_module modules/mod_authz_user.so
    #LoadModule authz_dbm_module modules/mod_authz_dbm.so
    #LoadModule authz_owner_module modules/mod_authz_owner.so
    #LoadModule authz_dbd_module modules/mod_authz_dbd.so
    LoadModule authz_core_module modules/mod_authz_core.so
    #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
    LoadModule access_compat_module modules/mod_access_compat.so
    LoadModule auth_basic_module modules/mod_auth_basic.so
    #LoadModule auth_form_module modules/mod_auth_form.so
    #LoadModule auth_digest_module modules/mod_auth_digest.so
    #LoadModule allowmethods_module modules/mod_allowmethods.so
    #LoadModule file_cache_module modules/mod_file_cache.so
    #LoadModule cache_module modules/mod_cache.so
    #LoadModule cache_disk_module modules/mod_cache_disk.so
    #LoadModule cache_socache_module modules/mod_cache_socache.so
    LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
    #LoadModule socache_dbm_module modules/mod_socache_dbm.so
    #LoadModule socache_memcache_module modules/mod_socache_memcache.so
    #LoadModule watchdog_module modules/mod_watchdog.so
    #LoadModule macro_module modules/mod_macro.so
    #LoadModule dbd_module modules/mod_dbd.so
    #LoadModule dumpio_module modules/mod_dumpio.so
    #LoadModule echo_module modules/mod_echo.so
    #LoadModule buffer_module modules/mod_buffer.so
    #LoadModule data_module modules/mod_data.so
    #LoadModule ratelimit_module modules/mod_ratelimit.so
    LoadModule reqtimeout_module modules/mod_reqtimeout.so
    #LoadModule ext_filter_module modules/mod_ext_filter.so
    #LoadModule request_module modules/mod_request.so
    LoadModule include_module modules/mod_include.so
    LoadModule filter_module modules/mod_filter.so
    #LoadModule reflector_module modules/mod_reflector.so
    #LoadModule substitute_module modules/mod_substitute.so
    #LoadModule sed_module modules/mod_sed.so
    #LoadModule charset_lite_module modules/mod_charset_lite.so
    #LoadModule deflate_module modules/mod_deflate.so
    #LoadModule xml2enc_module modules/mod_xml2enc.so
    #LoadModule proxy_html_module modules/mod_proxy_html.so
    LoadModule mime_module modules/mod_mime.so
    #LoadModule ldap_module modules/mod_ldap.so
    LoadModule log_config_module modules/mod_log_config.so
    #LoadModule log_debug_module modules/mod_log_debug.so
    #LoadModule log_forensic_module modules/mod_log_forensic.so
    #LoadModule logio_module modules/mod_logio.so
    #LoadModule lua_module modules/mod_lua.so
    LoadModule env_module modules/mod_env.so
    #LoadModule mime_magic_module modules/mod_mime_magic.so
    #LoadModule cern_meta_module modules/mod_cern_meta.so
    #LoadModule expires_module modules/mod_expires.so
    LoadModule headers_module modules/mod_headers.so
    #LoadModule ident_module modules/mod_ident.so
    #LoadModule usertrack_module modules/mod_usertrack.so
    #LoadModule unique_id_module modules/mod_unique_id.so
    LoadModule setenvif_module modules/mod_setenvif.so
    LoadModule version_module modules/mod_version.so
    #LoadModule remoteip_module modules/mod_remoteip.so
    LoadModule proxy_module modules/mod_proxy.so
    LoadModule proxy_connect_module modules/mod_proxy_connect.so
    LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    LoadModule proxy_http_module modules/mod_proxy_http.so
    LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
    LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
    #LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
    LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
    LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
    LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
    LoadModule proxy_express_module modules/mod_proxy_express.so
    #LoadModule session_module modules/mod_session.so
    #LoadModule session_cookie_module modules/mod_session_cookie.so
    #LoadModule session_crypto_module modules/mod_session_crypto.so
    #LoadModule session_dbd_module modules/mod_session_dbd.so
    LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
    #LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
    LoadModule ssl_module modules/mod_ssl.so
    #LoadModule dialup_module modules/mod_dialup.so
    LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
    LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
    LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
    LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
    #LoadModule mpm_event_module modules/mod_mpm_event.so
    LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
    LoadModule unixd_module modules/mod_unixd.so
    #LoadModule heartbeat_module modules/mod_heartbeat.so
    #LoadModule heartmonitor_module modules/mod_heartmonitor.so
    #LoadModule dav_module modules/mod_dav.so
    LoadModule status_module modules/mod_status.so
    LoadModule autoindex_module modules/mod_autoindex.so
    #LoadModule asis_module modules/mod_asis.so
    #LoadModule info_module modules/mod_info.so
    #LoadModule suexec_module modules/mod_suexec.so
    #LoadModule cgid_module modules/mod_cgid.so
    #LoadModule cgi_module modules/mod_cgi.so
    #LoadModule dav_fs_module modules/mod_dav_fs.so
    #LoadModule dav_lock_module modules/mod_dav_lock.so
    #LoadModule vhost_alias_module modules/mod_vhost_alias.so
    LoadModule negotiation_module modules/mod_negotiation.so
    LoadModule dir_module modules/mod_dir.so
    #LoadModule imagemap_module modules/mod_imagemap.so
    #LoadModule actions_module modules/mod_actions.so
    #LoadModule speling_module modules/mod_speling.so
    LoadModule userdir_module modules/mod_userdir.so
    LoadModule alias_module modules/mod_alias.so
    #LoadModule rewrite_module modules/mod_rewrite.so
    #own additions:
    LoadModule php5_module modules/libphp5.so
    <IfModule unixd_module>
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # It is usually good practice to create a dedicated user and group for
    # running httpd, as with most system services.
    User http
    Group http
    </IfModule>
    # 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents. e.g. [email protected]
    ServerAdmin [email protected]
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    #ServerName www.example.com:80
    # Deny access to the entirety of your server's filesystem. You must
    # explicitly permit access to web content directories in other
    # <Directory> blocks below.
    <Directory />
    Options FollowSymLinks
    AllowOverride none
    Require all denied
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "/srv/http"
    <Directory "/srv/http">
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    # The Options directive is both complicated and important. Please see
    # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # for more information.
    Options Indexes FollowSymLinks
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    # AllowOverride FileInfo AuthConfig Limit
    AllowOverride None
    # Controls who can get stuff from this server.
    Require all granted
    </Directory>
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    <IfModule dir_module>
    DirectoryIndex index.html
    </IfModule>
    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    <Files ".ht*">
    Require all denied
    </Files>
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "/var/log/httpd/error_log"
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    <IfModule log_config_module>
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    <IfModule logio_module>
    # You need to enable mod_logio.c to use %I and %O
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    CustomLog "/var/log/httpd/access_log" common
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog "/var/log/httpd/access_log" combined
    </IfModule>
    <IfModule alias_module>
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL. You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client. The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
    </IfModule>
    <IfModule cgid_module>
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #Scriptsock cgisock
    </IfModule>
    # "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "/srv/http/cgi-bin">
    AllowOverride None
    Options None
    Require all granted
    </Directory>
    <IfModule mime_module>
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    TypesConfig conf/mime.types
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #AddType application/x-gzip .tgz
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi
    # For type maps (negotiated resources):
    #AddHandler type-map var
    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
    </IfModule>
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #MIMEMagicFile conf/magic
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://www.example.com/subscription_info.html
    # MaxRanges: Maximum number of Ranges in a request before
    # returning the entire resource, or one of the special
    # values 'default', 'none' or 'unlimited'.
    # Default setting is to accept 200 Ranges.
    #MaxRanges unlimited
    # EnableMMAP and EnableSendfile: On systems that support it,
    # memory-mapping or the sendfile syscall may be used to deliver
    # files. This usually improves server performance, but must
    # be turned off when serving from networked-mounted
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    # Defaults: EnableMMAP On, EnableSendfile Off
    #EnableMMAP off
    #EnableSendfile on
    # Supplemental configuration
    # The configuration files in the conf/extra/ directory can be
    # included to add extra features or to modify the default configuration of
    # the server, or you may simply copy their contents here and change as
    # necessary.
    # Server-pool management (MPM specific)
    Include conf/extra/httpd-mpm.conf
    # Multi-language error messages
    Include conf/extra/httpd-multilang-errordoc.conf
    # Fancy directory listings
    Include conf/extra/httpd-autoindex.conf
    # Language settings
    Include conf/extra/httpd-languages.conf
    # User home directories
    Include conf/extra/httpd-userdir.conf
    # Real-time info on requests and configuration
    #Include conf/extra/httpd-info.conf
    # Virtual hosts
    #Include conf/extra/httpd-vhosts.conf
    # Local access to the Apache HTTP Server Manual
    #Include conf/extra/httpd-manual.conf
    # Distributed authoring and versioning (WebDAV)
    #Include conf/extra/httpd-dav.conf
    # Various default settings
    Include conf/extra/httpd-default.conf
    # Include owncloud
    Include /etc/httpd/conf/extra/owncloud.conf
    Include conf/extra/php5_module.conf
    # Configure mod_proxy_html to understand HTML4/XHTML1
    <IfModule proxy_html_module>
    Include conf/extra/proxy-html.conf
    </IfModule>
    # Secure (SSL/TLS) connections
    Include conf/extra/httpd-ssl.conf
    # Note: The following must must be present to support
    # starting without SSL on platforms with no /dev/random equivalent
    # but a statically compiled-in mod_ssl.
    <IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    </IfModule>
    # uncomment out the below to deal with user agents that deliberately
    # violate open standards by misusing DNT (DNT *must* be a specific
    # end-user choice)
    #<IfModule setenvif_module>
    #BrowserMatch "MSIE 10.0;" bad_DNT
    #</IfModule>
    #<IfModule headers_module>
    #RequestHeader unset DNT env=bad_DNT
    #</IfModule>
    thanks!
    Last edited by Carl Karl (2014-05-06 07:40:53)

    OK, solved.
    What I made wrong:
    https://localhost leads to the apache page
    https://localhost/owncloud leads to the owncloud page.
    (Just as an information if there are other apache noobs like me...)

  • Flash player is installed but it doesnot work in i e9

    flash player is installed but it does not work in ie9 i cant download from a site like facebook to install it just stops

    http://forums.adobe.com/thread/885448
    http://forums.adobe.com/thread/867968
    [topic moved to Flash Player forum]

  • Since downloading Yosemite Flash Player not working. Have downloaded Flash Player for Mac, but still not working. Is there a fix for this? Thanks.

    Since downloading Yosemite Flash Player not working. Have downloaded Flash Player for Mac, but still not working. Is there a fix for this? Thanks.

    1. System Preferences >  Flash Player > Advanced >  Delete  All
         Press the "Delete All" button.
         Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
       Download it first.
       The next step is important.
       Click Safari in the menubar and select “Quit Safari”.
       If it doesn’t quit, Force Quit it.
       Press command + option + esc keys together at the same time. Wait.
       When Force Quit window appears, select the application if not already.
       Press Force Quit button at the bottom of the window. Wait.
       Application will quit.
        Follow the prompts and install it.
        Restart computer. Relaunch Safari.
    2.  Allow  Plug-ins
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.

Maybe you are looking for