Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE)

Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE) --not able to use the Beats Speakers. Any software updates I need to install?
This question was solved.
View Solution.

Hi Jim,
You're welcome
Is the version of Windows 7 Ultimate you have installed 32bit or 64bit?
Open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers - do you see an existing entry for the IDT High Definition Audio CODEC listed here?
There is an alternative IDT Audio driver you may wish to try on the following link.
http://ftp.hp.com/pub/softpaq/sp53001-53500/sp53281.exe
Let me know if you get the same error with this version.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Touchpad hot-keys don't work after installing Wii XP on Satellite A200-1HV

Synaptics hot-keys after installing WinXp doesn't work.
http://i043.radikal.ru/0805/c5/09a7324bc1d2.jpg
On Vista i touch "Two arrows" touchpad lite up blue colour but now this does not happen.
I installed driver from Toshiba web-site for Win XP.
How to on hot-keys on touchpad?
From Russia with love = )

May be i said not good, about problem? I will try tell about my trouble. In Windows Vista Home Basic, when i touch "2 arrows" (You can see it, on screenshot, in up-right angel), after that, touchpad Began fluoresce by the blue colour, and after that i push 1 button from 6 buttons on touchpad (they all in red circle) and starts tha application. But no, when i touch "2 arrows", nothing happened. Is it information help to solve problem?
P.S. I try phone to Support, but, now in Russia we have holidays = (
Sincerely your JIABP.

Fn+b keys don't work after installing windows7 home premium.

I already installed the IDT Audio but the Beats icon does not show when the fn+b keys were pressed. What should I do?
Product Name: Pavilion dm1-4000au
Product number: QG411PA

Hi hotjicks,
Do you see the beats icon in the systray?
It appears to be time to reinstall the IDT audio driver and update the quick launch software. This can be done by use of the Recovery manager or by downloading the driver and software.
Select the driver or software you need to install and then click on next.
Here is a link to the support portal for your notebook. The drivers are in the driver and software download section.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Macbook pro 13inch,mid2010 qwertyu keys don't work after upgrade os x Yosemite

macbook pro 13inch,mid2010 qwertyu keys don't work after I upgrade os x 10.10 Yosemite. but it works on keyboard viewer. I'm not sure if it's hardware or software problem, how can I fix it?

Hello there, kipolo.
Great job using the Keyboard viewer to troubleshoot your issue so far. The following Knowledge Base article provides a great checklists of steps to pinpoint the issue a bit further:
One or more keys on the keyboard do not respond - Apple Support
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Accessibilty or Universal Access pane in System Preferences, then click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Accessibilty or Universal Access pane, click the Mouse tab, and make sure Mouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, see Unable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
Start from the Mac OS X Install Disc, choose Terminal from the Utilities menu and test the keys which were previously not working. If the keys work while started from the Install disc, then the keyboard itself is working correctly. Use How to troubleshoot a software issue to isolate the software issue that may be causing the keys to not respond.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Buit in ethernet don't work after installing Lion

Built in ethernet don't work after installing OSX 10.7 on my MacBookPro 2.4 Ghz Intel Core 15.
Someone else has the same problem?
On my MacPro 2 x 2.6 GHz Dual-Core Intel Xeon it's not working good, i have to do a restart to get internet connection.
Is there somebody who has te same problem and has a solution?

Something does look odd to me unless it's a typo in your post.
This look like what I'd expect from the NetGear Router - not form the modem. That is when You browse the router stats (http:/192.168.1.1)
I work with a modem with te folowing preverences:
Wan IP address    87.211.205.210
Lan IP address     192.168.1.1
Primery DNS server       62.58.50.5
Secondary DNS server   62.58.50.6
and a separate router Netgear WGT624v3
This is not exactly what I would expect from System Preferences/Network
the system preferences for the network are
Configure       by DHCP
IP address     192.168.1.15
Subnetmask 255.255.255.0
Router           192.168.5.1 <<<<<<<<<<< this should be 192.168.1.1??????
DNS              208.67.222.222
                     208.67.220.220
The Router address in System Preferences/Network should be the same as the LAN IP Address. In this case it's on a different network.
If this is not a type then this is a problem!
Not sure how it got to be that way.
Does it persist when resetting the modemand router?/
Steve

Card reader don't work after installing win 7 ultimate on pavilion dv-6 1260ej

card reader don't work after installing win 7 ultimate on pavilion dv-6 1260ej.
Tried downloading this driver:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75456-1&cc=il&dlc=he&lc=he&...
still dont work.

Hi,
Download and install the Chipset driver on the link below.
ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45041.exe
After the installation has completed, restart the notebook.
Next, download and install the Card Reader driver on the following link.
ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45046.exe
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

PL/SQL don't work after install Oracle 9204 patch set

I'm using Oracle 9.2.0.1.
some pl/sql don't work after i install database patch set 3 (9.2.0.4).
code--------------------------------
BEGIN
dbms_aqadm.stop_queue(
queue_name => 'WB_RT_SERVICE_QUEUE');
exception
when others
then
null;
END;
error message is: ora-03113 end-of-files on communication channel.
please help. thank you !!

Can you please tell me the soluation of this problem as I am also facing the similar problem ?
Thanks in advacne ?
Regards
Satpal

HT204408 FaceTime on imac don't work after installing mavericks, After log in it says: check internet connection and try again.

facetime stops working after installing mavericks. After login it says: check internet connection and try again. My internet connections are ok, I have both wifi and lan.

Please describe in detail what happened when you took all the applicable steps in the support article. That's the starting point for any further efforts to solve the problem.

Satellite A300 (PSAG8E) - Hardware problems after installing win7 ultimate

Hello and good day,
I've installed win7 ultimate a few days ago and windows managed to recognize most of my hardware accept my build in mic and camera and another component I am not sure about what it is (Windows update automatically downloaded the sound and graphics driver for me).
My questions are - where can find the remaining drivers and where can I get the preinstalled Toshiba tools and software? (The driver site in the Toshiba support page does not include those drivers and software)
Thank you very much
Roi Ben Simon

Hi
I have Satellite A300 (PSAG8E) too and installed Win7 Home premium and everything works perfect.
At first I must say that I don't know where you have searched drivers and Toshiba tools and utilities because all stuff is downloadable on Toshiba support & download page under http://eu.computers.toshiba-europe.com
It is logic that mic will not work if you didn't installed proper driver. Install drivers alone and not using Microsoft update. What you need are real and tested drivers and not some free drivers from internet.
Go to Toshiba download page and install all stuff following this installations order:
-Win7
-chipset driver
-storage manager
-display driver
-sound driver
-modem driver
-supervisor utility
-infrared
-patches
-configfree
-VAP
-toshiba hardware setup
-HDMI control
-WLAN driver
Everything works well but missing some drivers
Added Vista stuff:
-Toshiba assist - work properly
-Card reader - installed properly
-Webcam driver for A500 - tested with Skype - work properly.
-Synaptics driver

Volume buttons don't work after installing ios 7.0.4

I have an Iphone 4 (MC603B/A) and after installing IOS 7.0.4 the volume buttons and the mute switch don't work. Also, if I receive a call or a message I don't get any sound.
There is no sound either if I play a video. At the same time, the alarm does work and the voice in the GPS works also.
Any ideas on how to resolve this issue?
Thanks

I have exact the same problem as you! Soon I will go to an Apple Genius Bar. When I got the solution, I will tell you!

Satellite P200-RT1 - FN keys don't work after downgrade to XP

Hi
I have a Satellite P200-RT1, PSPBOC.
I have downgraded my operating system from Vista to XP.
Now I am having a driver issue, I have installed all of the drivers for my computer. I have installed all of the HotKey utilities for my computer as well and I still have an issue. Some of my FN Key functions don't work. The ESC to F5 Functions work but all of the functions above there do not.
I am really looking for the Display Brightness and Dimmer keys F6&F7 to work, if possible I would also like the F9 key touch pad enable/disable key to work as well, which as of right now they don't.
I was wondering if there is a driver that I am missing and if so which driver is it. I have taken my computer into three computer shops now and no one can figure this out. Please Help ME!
Thanks Ken.

Hello
It seems that your notebook is a Canadian model and therefore you can download the drivers on the Toshiba Canada website:
http://www.toshiba.ca
The problem is that I cant find Windows XP drivers on this website. :(
The only way I know is that you try the drivers and utilities from the European website. Normally the models are very similar and maybe it works. Its worth a try.
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Try to download and install Toshiba Accessibility and Controls (Driver).
Greets

My PWM don't work after install new cooler...

Hi...
I have MSI P55-GD65 and i have a problem... My PWM don't work anymore
I had a Intel stock cooler and PWM on this cooler work nice (when is idle speed is about 2000 RPM, on load above 2500 and up RPM), but i buy Cooler Master Hyper TX3 (with 4 pins and PWM control) and now speed on this cooler is 2900 RPM (100%) and don't go up or down depend of temps.
Just on start when i boot windows speed is nice i guest 2000 RPM (i hear that) but only 5-6 secounds (until boot logo appers) and then go full 100% 2900 RPM...
I don't change anything in BIOS after installation of this cooler (Hyper TX3). When i see that PWM don't work correctly i go in BIOS and try to load optimal settings, but again don't work...
Also "smart Fan Control" was disable when i using Intel stock cooler and also this option is disable now...
Please if somebady know, help me.... Im desperate

Quote
But PWM and Smart Control Speed is not same, right?
The SmartFan control is the automatic regulation of the PWM signal. If it is disabled, there is no regulation. It is that simple. Set the SmartFan Target Temperature to 55°C and see what happens.
Quote
Ok, but with intel stock cooler this option (smart control speed) was disable and my fan speed spin dependly of votage or temps.
Sorry, but I doubt that what you say is true.
Quote
smart control speed is option for change fan speed dependly of temps
Yes, and? That is what a fan is for: keep the processor cool. If it is cool enough, the fan slows down. As soon as the temperature is increasing, the fan speed will increase as well until it cools down again. That is how it is supposed to work.
Quote
PWM is depend of voltage, this is my problem....
PWM is a way to regulate the fan speed (pulse-width modulation). The PWM regulation method as such has not much to do with voltages but with the pulse width of the regulating signal.
What you are referring to is the event that triggers the PWM logic to speed up or slow down the fan. Tying it to "voltage" (what voltage?) would not make any sense whatsoever. Of course, a higher CPU voltage will theoretically result in higher temperatures. However, the BIOS does not know (or care) what kind of heatsink you have installed or how effective it is. The best way for an effective automatic an regulation is to make it dependend on CPU temperature alone (to treat the symptoms of raised voltage: heat) and that is exactly how it works on your board.

Keyboard volume keys don't work after waking from sleep

This problem has existed for many months on my 2009 Mac Pro. I'm running 10.6.3. The problem is reproducible 100% of the time. I use external speakers. Sound output is set to "Line Out."
1. Boot machine. External speakers work fine. Volume keys on keyboard (F11, F12) work correctly.
2. Put machine to sleep.
3. After waking from sleep, F11 and F12 no longer control the volume of the external speakers. The "pop" noise when hitting F11 and F12 is emitted from the internal speaker. The mute key (F10) does work for the external speakers, however.
4. The keyboard volume controls become responsive again by switching the sound output from Line Out to another output option and then back to Line Out.
This bug is a huge hassle. Does anyone have a solution?

I have several mid-2009 8-core Mac Pro's, all running Snow Leopard, and all have been having this problem as well.
I will not guarantee this is going to work for anyone else....but we have found a (slightly inelegant) workaround for it that has been working for several weeks now without fail.
Prior to putting your MacPro to sleep, run the volume all the way up and leave it there. Afterwards, put it to sleep as usual. We use the keyboard to do this, but I would imagine any method should have the same affect. However, I've not experimented.
Anyway...this has worked 100% of the time for us. The only downside of it is that you have to remember to run it up before....and then back down after waking (else that first alert sound or music file you play will really wake YOU up!)
If this works for anyone else, let me know.
Apple should never have let this one out the door with this bug. Especially, as Apple Support is....wanting, at best.
...sT

Some mouse features don't work after installing Mountain Lion

Any one else having these problem?
Swipe between ful-screen apps: Does not work after system has been asleep. Have to restart or log out/in to get it to resume working.
Mission Control: Does not work.
Smart Zoom: Does not work.

Assuming you've first checked Software Update to see if there are any updated drivers and it's still not working, you could try resetting the printing system.
System Preferences>Print & Scan, Control+Click or Right Click on a printer on the left and select 'reset printing system'. All printers will be deleted and need to be added again.

Why the flash player don't work after installing the video downloader add-on?

I've installed and uninstall the Firefox mobile app several times to try and fix this issue. Every time I add the video downloader add-on the flash player won't let me tap to play videos anymore. I've tried to completely enable the flash but still didn't work. I've used this add on for a few months and it worked fine up until the last Firefox update. Without the add-on the flash player works fine but after I've added the video downloader add-on I would have to uninstall and reinstall the mobile spot to get the flash to work again. I really love to use this add-on that's the advantage that Firefox mobile app has over other web browser. Please tell me how I can fix this issue. THANKS

Hello FRYDAE
Welcome to SuMo help Forum,
Thankyou for reaching us here
About your problem , have you tried to clear your privacy/browsing data? And see if flash works?
And you can try to disable the add-on, if you don't want to use it . and enable it again if you want to download a video .
Cheers!

Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE)

Similar Messages

Maybe you are looking for