Fn+F5 does not run WiFi SwitchOn/Off Utility

Fn+F5 and Fn+F8 dont work. When launching same utilities from Productivity center everthing is ok.
From Manual I read that following drivers and Utilities should be installed
ThinkPad Power Management driver
OnScreen Display Utility
Wireless device drivers
I could not find at my computer(Installed programm list) only OnScreen Utility.
1. How could understand installed this Utility on my T61 or not?
2. Are there other reasons for this problem?

The On Screen Display Utility is part of the Hotkey Driver package.
I was previously employed by Lenovo but have no formal role on this forum.
I am here on my own time because I like fooling with PCs, especially Lenovo ones. ALL my posts are purely my personal opinion.

Similar Messages

TS1398 my phone does not detect wifi at all

my phone does not detect wifi at all. what should i do? i did everything from turning it off to resetting my phone.

try a hard reset and charging it. then get it replaced through apple

List of games that are not running correctly or does not run in ICS update

I hope to start a list for apps (esp games) that does not run after the ICS update.
Kindly list the game name along with the error. Hopefully its not off topic.

Since many of us having issues with gaming [both HD and Non-HD] after updating to ICS, so i decided to share a little bit of info regarding gaming performance in ICS.
For the gaming troubles we are not yet sure whom to blame? SONY, ICS or the Game developer.
1. Few game developers said that their 3D engine is not yet compatible with ICS.
2. No response from Google yet.
3. Sony was suppose to update their Graphics driver [Adreno] in ICS, so we were expecting better gaming experience, but in reality it declined. [Hoping to solve in 4.0.4, if SONY releases]
Remember Gaming performance and experience can be different depending on device, application version etc. Results stated below may not be same for all.
Few Gaming updates from different users:
# Angry Birds Space : For some it worked/some not working [Worked for me]
# Temple Run : Touch Control issues [ Game Developers said that their 3D engine is not yet compatible with ICS]
# Fruit Ninja: Some reported it lags. The speed of movement is slow.
# Asphalt 6HD : Works but some weird lines appears in the screen.
# NOVA 2 HD : Runs for 2-3 mins then force closes.
# Backstab HD : Runs for 2-3 mins then force closes.
# Dead Space : Working well till now.
# MW3: Working.
# Fifa 12 : Not working for me.
# Shadow Gun: Not Working.
Now it was advised that you must use the latest version of the games available in Google play store. The version worked in Gingerbread may not work in ICS. So it is recommended that you download the latest version of the games you want to play in ICS.
**Before Downloading you can also contact the developers if the games has any compatibility issues with ICS or not.
Message was edited by: Auni

Labview 2011 executable does not run on AMD Quad Core

I have recently bought a brand new Toshiba Satellite with AMD Quad Core- A8-4500M 1.9GHz processor and Windows 7 OS. It does not run any labview executables. It runs on all my Intel machines without any problem. This is the first AMD ever bought (and the last). I need help in resolving this problem.
When I run an exe on the AMD, under Task Manager\Processes, I do see *.exe process running, but the Memory usage goes up and tops off at 100% and then it returns to 0. It's like a saw tooth waveform of memory usage, as if it's looking for some missing files. I have cleaned up the computer twice now and even a simple Add Two Numbers.exe does not work on this AMD.
Any clue, anyone? please?

I believe you are running into the problem described in this KB.
http://digital.ni.com/public.nsf/allkb/4734A6405B123FA58625799900813593
Regards,
Jon S.
National Instruments
LabVIEW R&D

IBook does not run on battery

My Ibook does not run on battery when it reaches 48%. It just shutsdown with no warnings. I have to connect the AC adapter to work if i disconnect it the ibook just shuts down. I have to waut until it reaches 100% and then i take the AC adapter. I book shuts down and after i turn it on with out the AC and it stays running on bat until the 48%. Then i have to go through everything again.

Jobbaman wrote:
Till now my battery has been working perfectly. The machine is about 1 year old and I use it heavily for my work. I prefer to unplug my battery when it's full, and use it till it go's to sleep before plugging it in again. This results in a very high Cycle count (453) but a still perfectly working battery (98% according to CoconutBattery), I can use the machine for about 4 hours on a full battery.
The amperage would be 0 since your battery is not in a charge cycle.
Part of your problem could honestly be your cycle count and method of caring for your battery. If you check some of the research about Li_ion batteries this is the worse way to use it. Li-Ion batteries work best with little charges. Deep cycling Li-Ion can kill the cells. There is no good reason to charge the battery and then use it as you have been doing. This just kills your battery for no reason. The MacBook is designed to cut the charge off when the battery is full and it does not hurt the battery to lie idle like this. The method you're using can prematurely kill your battery.
Either the battery has a problem that is not showing on you readings or the battery circuit is fried. Do you know someone that has a MacBook or live near an Apple store so you can test your battery on a known good MacBook. Or you could try one of their batteries in it.

HT1365 Hi I have Imac 5 processor and I guess installed Lion I am having difficulty with Wifi connection. Sometimes after shut down number of times still does not access wifi or if it does I can see wifi bar on iMac but can't open any webpage. Please help

Hi everybody,
I have Imac 5 processor and I guess installed Lion I am having difficulty with Wifi connection. Sometimes after shut down number of times still does not access wifi or if it does I can see wifi bar on iMac but can't open any webpage. Please help
Thanks

Hello:
There was an OS X 10.7 update released a month or so ago that fixed this problem. Run software update.
Barry

TS2570 iMac does not recognize wifi keyboard and track pad... cursor stays in top left corner under apple ?...

iMac does not recognize wifi keyboard and track pad... cursor stays in top left corner under apple ?...

Phillip,
I had this problem recently with a 3-year old Mac Pro intel, which was eventually replaced by Apple due to myriad other problems. When the frozen mouse happened, there was nothing I could do. Very frustrating to have the screen boot and the cursor is up there stuck, on the top left corner of the screen. Frozen. I called support several times. They were amazed. At one point they had me buy a cheap USB mouse (I was using a wireless mouse from Logitech and they thought there might be some kind of conflict). The USB mouse didn't work, either. Neither did an Apple mouse when I went out to buy one.
I ended up driving 70 miles to take the Mac to an Apple Store. I think they reinstalled the (Leopard) system in some secret way, because when the mouse was frozen so was everything else and I couldn't open the disk drive to put the OSX disk in there.
Why I'm here right now is that the same thing happened today with my NEW 3-month-old REPLACEMENT MAC PRO using its brand new wireless mouse, and I was hoping to find some insight. Again, a frozen cursor after the boot. Same top-left corner of the screen. Unlike you, when I click the mouse nothing happens -- no drop down.
Luckily, when I hard-rebooted by holding the button in, the mouse cursor came back. This time. Now I am afraid to turn my computer off. Been there done that before. Anyone have suggestions?
Thanks in advance.

REPORT DOES NOT RUN CORRECTLY , URGENT PLEASE HELP

Hi,
I am trying to run a report from visul basic screen, but it does not run correctly. Here is how I am running the report. There is a screen developed in VB This screen prompts the user for user id and password. Once it gets that, it connects to the oracle database and pulls out a column from a table. And passes that value as a parameter to the report. Now I am calling the the report for each individual value . There are 21 value being pulled out of the database and it invokes the report 21 times. So there are 21 report engines gets started. Is there a better way to do that ? Secondly when I pass the parameter , some parameters does not pass correctly I guess , because its not generating any out put . Like out of 21 may be 10 or 11 reports gets generated correctly but rest of the reports are blank. I debug the screen i saw that the parameter value is correct, everything seems good. But still the reports are comming blank. Any Idea why it is so ? The command line that i am using in VB screen is
Shell "C:\progra~1\ora95_2\bin\rwrun60.exe P:\Business_Analysis_&_Reporting_Tool\Test_REPORT_Templates\STORE_TYPES\Baby_Distribution_Report.Rdf USERID=" & UID & "/" & PWD & "@cposp201 DESFORMAT=PDF DESTYPE=FILE DESNAME=" & txtPath.Text & Replace(strName, " ", "_") & ".PDF BRND='" & adoRecBrand!Brand & "' PRINTJOB=NO PARAMFORM=NO"
In the above command " adoRecBrand!Brand " is the parameter thats being passed. This is actually a recordset and brand is the column in it. When I debug the screen , I see the value also there. But the report comes out blank. Please help. This is urgent.
Thanks
Feroz

The way you call reports is not scalable. If you have 100 records come back from database, you would end up launch 100 engines at the same times, which probably will blow up your machine. You should use oracle reports server to do that. You can either use rwcli60 to submit the job to reports server, or invoke rwcgi60 from URL.
I am afraid some of reports engine failed to start and you get nothing back in your case.
After switch to use reports server achitecture, if you still see some report is blank in your application, then you can run that report with that special set of parameters manually and see if any problem with the report itself.
Hope this helps.
Thanks,
-Shaun

ICal does not run one event that has a Applescript attached to it. 24u?

I have a number of reoccurring events in iCal that run a Applescript. Tow of them refuses to run. I have tried it as a Applescript and saved it as a run only and neither works (the script run fine if I test them by hand).
so I thought I have a look in the log and found this 24u information.
can anybody help out here? I am not sure why it appears, if it is good or bad, how to fix it and if it is at all realted to my problem. Other scripts seem to run well, it is this one and an other one that do not get activated by iCall.
They run on a MM running 10.6.8, iCall 4.0.4 (1395.7)
Thanks.
Log today:
19/09/2011 07:00:00          iCal Helper[211]          Error loading /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: dlopen(/Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX, 262): no suitable image found. Did find:
          /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: mach-o, but wrong architecture
19/09/2011 07:00:00          [0x0-0x12012].com.apple.iCal.helper[211]          iCal Helper: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/24U Appearance OSAX.osax" declares no loadable handlers.
19/09/2011 07:45:01          iCal Helper[317]          Error loading /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: dlopen(/Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX, 262): no suitable image found. Did find:
          /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: mach-o, but wrong architecture
19/09/2011 07:45:01          [0x0-0x28028].com.apple.iCal.helper[317]          iCal Helper: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/24U Appearance OSAX.osax" declares no loadable handlers.
19/09/2011 14:30:02          iCal Helper[1019]          Error loading /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: dlopen(/Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX, 262): no suitable image found. Did find:
          /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: mach-o, but wrong architecture
19/09/2011 14:30:02          [0x0-0x73073].com.apple.iCal.helper[1019]          iCal Helper: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/24U Appearance OSAX.osax" declares no loadable handlers.

Hi,
It looks like the version of 24U's Appearance OSAX you have installed does not run on Lion.
I would contact the developer to see if they have a version that does yet. See http://www.24usoftware.com/AppearanceOSAX
Alternatively you could look to see if the Applescript really needs to use it.
Best wishes
John M
Edit: If you are running Snow Leopard, I think you may need to make the application "iCal Helper" (which you'll find in iCal's application package) run as 32 bit. I'd also suggest you check this with 24U.

Add does not run with sql server 2008

Hi all,
My add on in the development environment does not run with SQL SERVER 2008. It ran well with SQL Server 2005 and sap b1 2207 B.
On executing the project file system throws an error "YOU ARE NOT CONNECTED TO THE COMPANY"
we are trying this scenario on a test machine where SAP B1 2007B with temporary license for one month and SQL server 2008
is installed.
Help needed.
Thanking you
Pradnya

Hi Use this
Dim i as integer
i=oCompany.Connect()
if i<> 0 Then
msgbox(ocompany.GetLastErrorDescription ())
end if
the you will get the error description also use try catch wherever necessary
Alternatively you can use
Dim SboGuiApi As SAPbouiCOM.SboGuiApi
Dim sConnectionString As String
Set SboGuiApi = New SAPbouiCOM.SboGuiApi
sConnectionString = Command
SboGuiApi.Connect sConnectionString
Set SBO_Application = SboGuiApi.GetApplication()
Set ocompany = New SAPbobsCOM.Company 'initialate DI company object
ocompany = SBO_Application.Company.GetDICompany
HTH,
Atul

Premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."

premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden." Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?

Jurgen Freund
Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
How to fix the ERROR 126 when you open OpenGL programs - YouTube
The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
LoadLibrary failed with error 126: cant find the required
Please let us know if that worked for you.
Thank you.
ATR
Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update.

My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows proc

My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows processes, while Firefox does not run.
I manually deleted Firefox from the list once I have Windows processing.
And when I clicked on Firefox, Firefox will open quickly and easily.
Firefox process in Windows Processes names list called "firefox.exe * 32" is.
Please try to solve my problem, my problem is how to solve?

Hi, are you saying that you start Firefox and it stalls -- you can see it in the Task Manager but it never displays -- but if you kill that process and start Firefox again it starts up properly that second time?
If you look at the statistics available in the Task Manager's processes tab such as bytes read or other bytes, can you see whether Firefox is doing anything at all? ''Note: You might need to add columns if your Processes tab isn't set up to display statistics. You can do that from the View menu.''
You might already have seen these troubleshooting articles. If not, does anything here help:
* [[Firefox won't start - find solutions]]
* [[Firefox hangs or is not responding - How to fix]]

Lightroom 5.6 does not run following latest CC Photoshop 2014 and Bridge updates

I am running Creative Cloud Photography on OSX 10.9.4. Yesterday I updated Photoshop 2014 and Bridge using the CC desktop app as prompted by CC. Since then Lightroom does not run. When I open it the blue intro screen flashes up for less than a second. To try and recover I have uninstalled Lightroom (5.6) and re-installed it several times using both the CC app and directly from the Adobe website. The result is always the same. I can find nothing about this on Adobe Support although I can find others who have had the same symptoms on a web search. Their solution was to re-install Lightroom from the web site but that hasn't worked for me. I had Lightroom installed before I went to CC and before CC included Lightroom in the Photography package. Does anyone understand this issue and can you please advise me what to try next? Many thanks.

Okay, Solution 1 from this link Error "Unable to start correctly - 0Xc00007b" fixed it for me. But now it's asking me for the serial number which I can't find anywhere... shouldn't that go without with the cloud?

Finder does not run properly after starting up [Mountain Lion]

I've installed MountainLion from Snow Leopard 10.6.8
My Mac is Macbook7,1 (Macbook White) Intel Core 2 Duo
When the installation finish, it seems like Finder does not run. I have to click on the Finder icon on the Dock to make it run.
And then I got some of problem after that
1. When I Click "About This Mac", nothings happen.
2. When I Click "Restart...", "Shutdown..." or "Sleep", nothings happen. So, I have to Shutdown or Restart my Macbook from "Login Window..." only.
3. Some of my settings in "System Preferences" do not be saved. Such as Trackpad settings (I can't "Tap to Click" in every time I start up my Macbook, I have to use physical click instead.) and Spotlight Hotkey settings (When I switch the Language, the Spotlight is popping up.)
I'm not sure what is the cause of these problem.
Could anyone help me please.
Thank You.

I forgot to mention (and add a new level of strangeness) that Mail is retreiving all of my messages from my personal (AT&T) account without issue.
And I just discovered an even bigger problem: all of my emails from my Sent and other folders from my work account are completely gone!
I may have no choice but to revert to my Lion system as of yesteday, before I installed ML.

QT/KDE Java does not run

I decided to learn Qt Java and KDEJava. I found some demo code here but I can't get it to work.
It compiles fine.
$ javac -classpath $CLASSPATH:/opt/kde/lib/java/qtjava.jar ScribbleWindow.java
But does not run.
$ java -classpath $CLASSPATH:/opt/kde/lib/java/qtjava.jar ScribbleWindow
Exception in thread "main" java.lang.UnsatisfiedLinkError: no qtjava in java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at org.kde.qt.qtjava.initialize(qtjava.java:272)
at org.kde.qt.qtjava.<clinit>(qtjava.java:283)
at ScribbleWindow.<clinit>(ScribbleWindow.java:300)
$
Wiki says that
==> Kdebindings has been built with support for Java and GTK.
==> If you want to use these features use the following pacman commands:
==> 'pacman -S j2sdk'
==> 'pacman -S gtk'
I have kdebindings and j2sdk installed. After searching the forum I'm not sure if Wiki is right. Is kdebindings compiled with java support or not? Am I supposed to install or recompile something to get it working?

phrakture wrote:
ummm, try it like this:
$ java -classpath $CLASSPATH:/opt/kde/lib/java/ ScribbleWindow
It gives different error:
$ java -classpath $CLASSPATH:/opt/kde/lib/java/ ScribbleWindow
Exception in thread "main" java.lang.NoClassDefFoundError: org/kde/qt/QWidget
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.security.SecureClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.access$100(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)

Fn+F5 does not run WiFi SwitchOn/Off Utility

Similar Messages

Maybe you are looking for