Fn+F5 function and touchpad doesn't work correctly on Satellite A series

Hi
I just setup a windows Vista & I install the driver after download it from the net but i found that;
1- the switch between the screen & s-video (fn + f5) doesn't work but the other function (fn) work
2- when i put my finger in the right of the mouse pad it must scroll the screen & in the bottom of the pad it must scroll left & right the screen but it didn't work
So plz tell me the solution if it is a program or driver issue.
Plz give me the direct link
thinku

Hi
What notebook do you have?
I presume your notebook was delivered with XP and now you want to use it with Vista OS.
Please note that you need to install the Toshiba Vista Value Added Package to use all the notebook features.
Very important is the Components Common Driver and the TOSHIBA Flash Cards.
The Flashcards provides the Hotkey function and the launcher function that starts the Hotkey function.
Please reinstall it!
The additional touchpad functionality must be configured firstly!
This can be done in control panel -> mouse
There you should look for the touchpad settings and could configure the touchpad scroll areas again.
Bye

Similar Messages

Touchpad doesn't work correctly

My touchpad isn't working correctly anymore.
i don't know if this is due to hardware or software but i will explain the problem and maybe someone can help me.
the pad is working correctly, so i can move the mouse, but when i try to push the touch pad it doesn't work anymore. i've already activated the touch option so that i can still whithout a usb mouse.
But please someone help me

If the click function is working with the tap, but not by physically clicking the touch pad, it is more than likely a hardware failure. Take it to the apple store for a diagnosis.

Installed Panther on Older iMac and Mail Doesn't Work Correctly

I installed panther on my son's iMac recently. I created a subaccount for him from my verizon dsl account. I made sure all the info was the same on my mail preferences as in his but we can't send or received anything. I keep getting a message to put in the password for the account and I do and it doesn't let me in, just the same message comes up again. I put his account into my mac's Mail program and it works fine, but on his it doesn't. All the info is the same - I've checked and checked his password and it doesn't work. I even put my account info onto his computer and I have the same password problems. Anybody?

thank you now everything works
For people with the same problem:
Outgoing server (SMTP): port 587 – you must also choose “TLS” for the option “Use the following types of encrypted connection”.

[SOLVED]Keyboard and touchpad doesn't work after reboot from Arch

Excuse me, but i'm a newbie. I'm not sure if this is an arch problem, but i will just post it here.
I've beening using Arch64 and it works just fine. However, every time i reboot from arch into Windows 7 (32bit), the keyboard and touchpad will stop responding just when the Win7 splash screen shows, however the mouse works fine. Then when you shutdown the computer (from win7 now) it will take apparently longer time, and sometimes i have to press the power key 5 seconds to make it shutdown.
It seems the correct way (to reboot from arch to win7) is to shutdown down the computer first and start it again, and everything will work fine.
And rebooting from win7 to win7 or arch to arch or win7 to arch will work fine too.
I'm glad to post extra information, but I've got no clue and i'm not sure what to put here.
The laptop is a Lenovo Y450 with Intel Core Dual P7540, 4G Memory, NV GT240M. Kernel version of Arch is 3.0.6 (but the problem existed long since earlier versions) I don't have a swap partition. If you need extra information, please mention the item.
Thanks a lot!
Last edited by crlf0710 (2011-11-15 10:29:38)

Hi!
That is indeed strange. Since your external mouse works fine (which probably is connected via USB, right?) it appears that the problem lies somewhere around the internal keyboard/touchpad access. I'm not sure how this works with a Lenovo Y450, but just try to enter BIOS (in case you have not been there, you probably have to hit F1 or F2 during startup - less likely it would be delete or escape ...) and look for your keyboard/touchpad options.
You should probably find something like "... legacy support ...". This is a relic from PS/2 times and emulates your internal input devices as PS/2 devices. So - when found, just change the setting (you cannot mess anything up, and both systems will probably not even pop up a message). My guess is it is set to "enabled" and Arch somehow messes with the PS/2 emulation in your case .... so just turn it off.
good luck

Synaptics Touchpad doesn't work correctly after update

I have a Lenovo T61 with 2.6.37-ARCH #1 SMP PREEMPT Tue Mar 15 11:40:49 UTC 2011 i686 Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz GenuineIntel GNU/Linux.
xf86-input-synaptics is installed, version 1.4.0-1
Since an update, I get the following error when running startx:
Query no synaptics: 6003C8
Touchpad unable to query/initialize Synaptics Hardware
PreInit returned NULL for "Touchpad"
That is a part of /var/log/Xorg.0.log. The module "synaptics" is loaded two times...
X.Org X Server 1.9.4.901 (1.9.5 RC 1)
Release Date: 2011-03-04
[ 19041.695] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 25 16:17:46 2011
[ 19041.716] (==) Using config file: "/etc/X11/xorg.conf"
[ 19041.736] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 19041.757] (==) ServerLayout "Xorg Configured"
[ 19041.757] (**) |-->Screen "Screen0" (0)
[ 19041.757] (**) | |-->Monitor "Monitor0"
[ 19041.757] (**) | |-->Device "Card0"
[ 19041.757] (**) |-->Input Device "Keyboard0"
[ 19041.757] (**) |-->Input Device "USB Mouse"
[ 19041.757] (**) |-->Input Device "Touchpad"
[ 19041.757] (**) Option "DontZap" "False"
[ 19041.757] (**) Option "AllowMouseOpenFail" "true"
[ 19041.757] (**) Option "AutoAddDevices" "False"
[ 19041.757] (**) Option "AutoEnableDevices" "False"
[ 19041.757] (**) Not automatically adding devices
[ 19041.757] (**) Not automatically enabling devices
[ 19041.758] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 19041.758] (II) Loader magic: 0x81f3280
[ 19041.758] (II) Module ABI versions:
[ 19041.758] X.Org ANSI C Emulation: 0.4
[ 19041.758] X.Org Video Driver: 8.0
[ 19041.758] X.Org XInput driver : 11.0
[ 19041.758] X.Org Server Extension : 4.0
[ 19041.759] (--) PCI:*(0:1:0:0) 10de:0429:17aa:20d8 rev 161, Mem @ 0xd6000000/16777216, 0xe0000000/268435456, 0xd4000000/33554432, I/O @ 0x00002000/128
[ 19041.759] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 19041.759] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 19041.759] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 19041.759] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 19041.759] (II) "record" will be loaded by default.
[ 19041.759] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 19041.759] (II) "dri2" will be loaded by default.
[ 19041.759] (II) LoadModule: "ddc"
[ 19041.759] (II) Module "ddc" already built-in
[ 19041.759] (II) LoadModule: "dbe"
[ 19041.759] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 19041.759] (II) Module dbe: vendor="X.Org Foundation"
[ 19041.759] compiled for 1.9.4.901, module version = 1.0.0
[ 19041.759] Module class: X.Org Server Extension
[ 19041.759] ABI class: X.Org Server Extension, version 4.0
[ 19041.759] (II) Loading extension DOUBLE-BUFFER
[ 19041.759] (II) LoadModule: "dri"
[ 19041.759] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 19041.759] (II) Module dri: vendor="X.Org Foundation"
[ 19041.759] compiled for 1.9.4.901, module version = 1.0.0
[ 19041.759] ABI class: X.Org Server Extension, version 4.0
[ 19041.759] (II) Loading extension XFree86-DRI
[ 19041.759] (II) LoadModule: "extmod"
[ 19041.760] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 19041.760] (II) Module extmod: vendor="X.Org Foundation"
[ 19041.760] compiled for 1.9.4.901, module version = 1.0.0
[ 19041.760] Module class: X.Org Server Extension
[ 19041.760] ABI class: X.Org Server Extension, version 4.0
[ 19041.760] (II) Loading extension MIT-SCREEN-SAVER
[ 19041.760] (II) Loading extension XFree86-VidModeExtension
[ 19041.760] (II) Loading extension XFree86-DGA
[ 19041.760] (II) Loading extension DPMS
[ 19041.760] (II) Loading extension XVideo
[ 19041.760] (II) Loading extension XVideo-MotionCompensation
[ 19041.760] (II) Loading extension X-Resource
[ 19041.760] (II) LoadModule: "glx"
[ 19041.760] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 19041.782] (II) Module glx: vendor="NVIDIA Corporation"
[ 19041.782] compiled for 4.0.2, module version = 1.0.0
[ 19041.782] Module class: X.Org Server Extension
[ 19041.782] (II) NVIDIA GLX Module 260.19.44 Sun Feb 27 21:47:21 PST 2011
[ 19041.782] (II) Loading extension GLX
[ 19041.782] (II) LoadModule: "synaptics"
[ 19041.782] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 19041.782] (II) Module synaptics: vendor="X.Org Foundation"
[ 19041.782] compiled for 1.9.4, module version = 1.4.0
[ 19041.782] Module class: X.Org XInput Driver
[ 19041.782] ABI class: X.Org XInput driver, version 11.0
[ 19041.782] (II) LoadModule: "record"
[ 19041.782] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 19041.783] (II) Module record: vendor="X.Org Foundation"
[ 19041.783] compiled for 1.9.4.901, module version = 1.13.0
[ 19041.783] Module class: X.Org Server Extension
[ 19041.783] ABI class: X.Org Server Extension, version 4.0
[ 19041.783] (II) Loading extension RECORD
[ 19041.783] (II) LoadModule: "dri2"
[ 19041.783] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 19041.783] (II) Module dri2: vendor="X.Org Foundation"
[ 19041.783] compiled for 1.9.4.901, module version = 1.2.0
[ 19041.783] ABI class: X.Org Server Extension, version 4.0
[ 19041.783] (II) Loading extension DRI2
[ 19041.783] (II) LoadModule: "nvidia"
[ 19041.783] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 19041.783] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 19041.783] compiled for 4.0.2, module version = 1.0.0
[ 19041.783] Module class: X.Org Video Driver
[ 19041.783] (II) LoadModule: "kbd"
[ 19041.783] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[ 19041.783] (II) Module kbd: vendor="X.Org Foundation"
[ 19041.783] compiled for 1.9.4, module version = 1.6.0
[ 19041.783] Module class: X.Org XInput Driver
[ 19041.783] ABI class: X.Org XInput driver, version 11.0
[ 19041.783] (II) LoadModule: "mouse"
[ 19041.783] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 19041.784] (II) Module mouse: vendor="X.Org Foundation"
[ 19041.784] compiled for 1.9.4, module version = 1.7.0
[ 19041.784] Module class: X.Org XInput Driver
[ 19041.784] ABI class: X.Org XInput driver, version 11.0
[ 19041.784] (II) LoadModule: "synaptics"
[ 19041.784] (II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 19041.784] (II) NVIDIA dlloader X Driver 260.19.44 Sun Feb 27 21:31:52 PST 2011
[ 19041.784] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 19041.784] (--) using VT number 7
[ 19041.891] (II) Loading sub module "fb"
[ 19041.891] (II) LoadModule: "fb"
[ 19041.891] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 19041.891] (II) Module fb: vendor="X.Org Foundation"
[ 19041.891] compiled for 1.9.4.901, module version = 1.0.0
[ 19041.891] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19041.891] (II) Loading sub module "wfb"
[ 19041.891] (II) LoadModule: "wfb"
[ 19041.891] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 19041.891] (II) Module wfb: vendor="X.Org Foundation"
[ 19041.891] compiled for 1.9.4.901, module version = 1.0.0
[ 19041.891] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19041.891] (II) Loading sub module "ramdac"
[ 19041.891] (II) LoadModule: "ramdac"
[ 19041.891] (II) Module "ramdac" already built-in
[ 19048.959] (**) Option "CoreKeyboard"
[ 19048.959] (**) Keyboard0: always reports core events
[ 19048.959] (**) Option "Protocol" "standard"
[ 19048.959] (**) Option "XkbRules" "xorg"
[ 19048.959] (**) Option "XkbModel" "pc105"
[ 19048.959] (**) Option "XkbLayout" "de"
[ 19048.959] (WW) Option "XkbVariant" requires an string value
[ 19048.959] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
[ 19048.983] (WW) USB Mouse: No Device specified, looking for one...
[ 19049.058] (II) USB Mouse: Setting Device option to "/dev/input/mice"
[ 19049.058] (--) USB Mouse: Device: "/dev/input/mice"
[ 19049.058] (==) USB Mouse: Protocol: "Auto"
[ 19049.058] (**) Option "SendCoreEvents" "true"
[ 19049.058] (**) Option "CorePointer"
[ 19049.058] (**) USB Mouse: always reports core events
[ 19049.058] (**) Option "Device" "/dev/input/mice"
[ 19049.191] (**) Option "Buttons" "5"
[ 19049.191] (==) USB Mouse: Emulate3Buttons, Emulate3Timeout: 50
[ 19049.191] (**) Option "ZAxisMapping" "4 5"
[ 19049.191] (**) USB Mouse: ZAxisMapping: buttons 4 and 5
[ 19049.191] (**) USB Mouse: Buttons: 9
[ 19049.191] (II) XINPUT: Adding extended input device "USB Mouse" (type: MOUSE)
[ 19049.191] (**) USB Mouse: (accel) keeping acceleration scheme 1
[ 19049.191] (**) USB Mouse: (accel) acceleration profile 0
[ 19049.191] (**) USB Mouse: (accel) acceleration factor: 2.000
[ 19049.191] (**) USB Mouse: (accel) acceleration threshold: 4
[ 19049.218] (II) USB Mouse: Setting mouse protocol to "ExplorerPS/2"
[ 19049.510] (II) USB Mouse: ps2EnableDataReporting: succeeded
[ 19049.510] (**) Option "Device" "/dev/input/mouse0"
[ 19049.521] (--) Touchpad: invalid x-axis range. defaulting to 1615 - 5685
[ 19049.521] (--) Touchpad: invalid y-axis range. defaulting to 1729 - 4171
[ 19049.521] (--) Touchpad: invalid pressure range. defaulting to 0 - 256
[ 19049.521] (--) Touchpad: invalid finger width range. defaulting to 0 - 16
[ 19049.521] (**) Option "SHMConfig" "on"
[ 19049.521] (**) Option "LeftEdge" "1300"
[ 19049.521] (**) Option "RightEdge" "5900"
[ 19049.521] (**) Option "TopEdge" "1100"
[ 19049.521] (**) Option "BottomEdge" "5200"
[ 19049.521] (**) Option "FingerLow" "25"
[ 19049.521] (**) Option "FingerHigh" "30"
[ 19049.521] (**) Option "MaxTapTime" "180"
[ 19049.521] (**) Option "MaxTapMove" "220"
[ 19049.521] (**) Option "VertScrollDelta" "100"
[ 19049.521] (**) Option "VertTwoFingerScroll" "on"
[ 19049.521] (**) Option "MinSpeed" "0.06"
[ 19049.521] (**) Option "MaxSpeed" "0.6"
[ 19049.521] (**) Option "AccelFactor" "0.0040"
[ 19049.541] (EE) Query no Synaptics: 6003C8
[ 19049.541] (--) Touchpad: no supported touchpad found
[ 19049.542] (EE) Touchpad Unable to query/initialize Synaptics hardware.
[ 19049.558] (EE) PreInit returned NULL for "Touchpad"
Running synclient returns the following:
Couldn't find synaptics properties. No synaptics driver loaded?
Running syndaemon returns the following:
Unable to find a synaptics device.
The Touchpad is still working, but changing options in the xorg.conf or the 10-synaptics.conf doesn't have any effect anymore. For example, I can not enable VertTwoFingerScroll, what was no problem before the error occured.
The section for the touchpad in /proc/bus/input/devices is the following:
I: Bus=0011 Vendor=0002 Product=0007 Version=81b1
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input5
U: Uniq=
H: Handlers=mouse0 event5
B: EV=b
B: KEY=6420 0 30000 0 0 0 0 0 0 0 0
B: ABS=11000003
I tried the following:
Removing the 10-synaptics.conf and commenting out the touchpad-section in the 10-evdev.conf
Adding the line MatchDevicePath "/dev/input/event*" to the 10-synaptics.conf
Thanks for help

I commented the whole
#Section "InputDevice"
# Identifier "Synaptics Touchpad"
#EndSection
part
and the appropiate line
#InputDevice "Synaptics Touchpad" "SendCoreEvents"
on Sever Layout.
It stopped the EE error, touchpad works here
but it's reverted to old "typing=accidentally doing clicks" since it got way too sensitive
I can't run gsynaptics , synclient or syndaemon to fix it (as I used to)
since I get
drini ~ $ synclient
Couldn't find synaptics properties. No synaptics driver loaded?

What should I do if my ipod has warranty and it doesn't work correctly

I bought my iPod this year and it is supposed to have a 1 year warranty. I'm wondering if I can take it the the apple store because I know that they must cover the damage in my microphone.

Charliegascon wrote:
I'm wondering if I can take it the the apple store ...
Sure. Be sure to make an appointment first...
http://www.apple.com/retail/geniusbar/

Re: Cool Edit Pro doesn't work on my Satellite L Series

As suggested by Tech Support, I have downloaded new drivers from Realtek, hoping to fix the Windows 7 problem (a device id has been used that is out of range for your system).
Nothing seems to work. Can anyone suggest a fix?
Don

Toshiba doesnt support third part applications so if you have some problem talk with manufacturer support.
If you use original drivers from Toshiba they are definitely OK and all are tested including sound driver.
Im afraid there must be some other problem.
Thanks Jeka for doing this test.

Translation from CS5 to Cloud doesn't work correct, navi and linked images are broken.

Translation from CS5 to Cloud doesn't work correct, <navi> and linked images are broken.
The data of CS5 was created at another PC. I installed Cloud version into two different PC. One has had the site data since dreamweaver CS5 and it works correct in Cloud version. Another PC got the site data from remote server and it doesn't work correct. <navi> and linked image are broken.

Another PC got the site data from remote server and it doesn't work correct. <navi> and linked image are broken.
This implies your site is not properly defined in DW. Go to Site > Manage Sites.
Or simply go to your other installation of DW and export the site definition file from Manage Sites.
Save it to a flash stick or other removable drive. Then import the STE file into your 2nd installation of DW.
Nancy O.

Hello, I just got an iPhone 4S and it seems that the bluetooth function in it doesn't work. I tried few times to pair it to other non Apple phones and it never worked. Does anyone has an idea how to solve the problem? Tks.

Hello, I just got an iPhone 4S and it seems that the bluetooth function in it doesn't work. I tried few times to pair it to other non Apple phones but it never worked. Does anyone has an idea how to solve the problem? Tks.

This is not a feature of iPhone, iPad or iOS.
Bluetooth is supported for stereo headsets/speakers, handsfree telephone
devices/headsets, some keyboards, some peer-to-peer apps from the
app store and internet tethering where provided by the carrier.
Other than this it will not connect to a phone/computer/device. (thanks to ckuan for the wording)

Satellite PRO A200-1S1 with Windows 7 x32. Touchpad doesn't work

Hi everybody
I Installed Windows 7 on my Satellite Pro A200-1S1, retrieved all the drivers on Toshiba site, everything works fine (less than the web camera that didn't work even with previous s.o. XP or Vista...). But my Touchpad doesn't work at all.... No Fn+F9, no driver, nothing works. And in my control panel-device manager seems to be everything ok.
Any suggestion?

Hi
Never had any problems with the touchpad using Win 7 32bit.
I recommend installing VAP (value added package) and Flash Card Support Utility to get the FN button functionality. Then you could try FN + F9
Both tools can be downloaded from Toshiba European driver page there you should choose Sat L500 series because I didnt find mentioned Win 7 software for A200 series.
Check also the touchpad drivers which I found in L500 download area (Alps a Synaptics)
<img src='http://img510.imageshack.us/img510/5830/capturelxz.jpg' border='0' width='550px'/>

Touchpad doesn't work - HP Pavilion DV4 - 2120ca

Re: Pavilion DV4-2120ca
Touchpad doesn't work after cleaning out the dust collection in the fan, heat sink area. New Therma paste was applied.
Both the keyboard & touchpad were the 2 things that didn't work following reassembly. The keyboard didn't work but able to use USB wireless mouse. Couple days ago the replacement battery finally arrived, installed and charged for 12 hours. After restart, the keyboard works as it should.
Unfortunately, touchpad still doesn't work. The light switch above the touchpad works, clicking on it turns white & amber but any movement scrolling doesn't work.
We tried the following, but unsuccessful
double tapping top left corner
Hard Reset
Uninstalled ALPS & Synaptics -- reinstalled , restarted
Updated Windows, HP, BIOS, Drivers
Don't recall during reassembly if touchpad has a cable or connector. If so, perhaps worth try to disconnect & reconnect to ensure correct connection.
What do u advise to try next?
Thank u
~ Gayle ~

Did you connect the ribbon cable for the Touchpad. Often times there is one for the keyboard and one for the touchpad separately. Hopefully you have not damaged the ribbon cable. Just make sure you push it all the way in and seat it properly.
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HELP! Uploading AS3 Game to server, no sound and Spacebar doesn´t work HELP!

Hello, relatively new to AS3 and flash, this is the first time i am publishing anything. We are trying to upload our simple flashgame to our webserver, the game works perfectly fine locally save for one thing. We get an error regarding TLF which says it wont stream or something. So when it gets online, no sounds play and spacebar doesn't work, left and right arrow does work. We have three TLF text fields that are used to update score, lives and show you final score. If i turn these into classical text they stop working.
Things we have tried: Changing default linkage from RLS to Merged into code, changing the text boxes to classical text(they then stop working), made sure the paths are correct(all files are in the same directory including the .swz file)
This is the code from the soundclass:
package
    import flash.net.URLRequest;
    import flash.media.Sound;
    import flash.media.SoundChannel;
    import flash.events.*;
    public class MySound
        private var bgSound:Sound;
        private var fireSound:Sound;
        private var waterSound:Sound;
        private var earthSound:Sound;
        private var lightSound:Sound;
        private var soundChannel:SoundChannel;
        public function MySound()
            soundChannel = new SoundChannel();
            bgSound = new Sound();
            var req:URLRequest = new URLRequest("BackgroundSound.mp3");
            bgSound.load(req);
            //fire
            fireSound = new Sound();
            var req2:URLRequest = new URLRequest("soundFire.mp3");
            fireSound.load(req2);
            // water
            waterSound = new Sound();
            var req3:URLRequest = new URLRequest("soundWater.mp3");
            waterSound.load(req3);
            // earth
            earthSound = new Sound();
            var req4:URLRequest = new URLRequest("soundEarth.mp3");
            earthSound.load(req4);
            // light
            lightSound = new Sound();
            var req5:URLRequest = new URLRequest("soundLight.mp3");
            lightSound.load(req5);
        public function playBgSound()
            soundChannel = bgSound.play(0, 999999);
        public function stopBgSound()
            soundChannel.stop();
        public function playFireSound()
            fireSound.play();
        public function playWaterSound()
            waterSound.play();
        public function playEarthSound()
            earthSound.play();
        public function playLightSound()
            lightSound.play();
I can somewhat get that sound can bugg out, but why does spacebar stop functioning? ANy help is greatly appreciated as this has to be delivered in twelve hours(published online) for a school assignment.

Also might add publishing it locally in my own browser everything works, as does ofcourse playing it in flash itself. Changing from RLS to merged into code stops the error from coming, but doesn´t fix the problem on the server.
Code from main class related to sound and spacebar:
import flash.display.*;
    import flash.events.*;
    import flash.ui.Keyboard;
    import flash.text.TextField;
    import flash.media.Sound;
    import flash.net.URLRequest;
    import flash.events.MouseEvent;
    import flash.utils.Timer;
    import flash.events.TimerEvent;
    public class main extends MovieClip
        private var fireTimer:Timer; //delay between shots
        private var canFire:Boolean = true;
        private var mySound:MySound;
        private var bulletSpeed:Number = -450;
          public function main()
            //load sounds
            mySound = new MySound();
        private function playGame(event:MouseEvent)
            gotoAndStop(2);
            // initialize
            myLives = 5;
            myHitsNo = 0;
            weaponType = 1;
            mybullets = new Array();
            enemys = new Array();
            myScoreTxt.text = "Score: " + myHitsNo;
            myLivesTxt.text = "Lives: " + myLives;
            fireTimer = new Timer(400, 1);
            fireTimer.addEventListener(TimerEvent.TIMER, shootTimerHandler, false, 0, true);
            stage.addEventListener(KeyboardEvent.KEY_DOWN, listenKeyDown);
            stage.addEventListener(Event.ENTER_FRAME, addEnemy);
            stage.addEventListener(Event.ENTER_FRAME, checkCollision);
            player = new thePlayer(stage.stageWidth-40, spawnPoint2);// stage.stageHeight/2);
            stage.focus = player;
            addChild(player);
            mySound.playBgSound();
public function listenKeyDown(event:KeyboardEvent) // Controls and weapontype selector
            if (event.keyCode == 37) //left
                player.movethePlayerDown();
            if (event.keyCode == 39) //right
                player.movethePlayerUp();
if (event.keyCode == Keyboard.SPACE) //space
                shootBullet();
                //soundFX.attachSound("Pistol Fire.wav");
                //soundFX.start();

I just downlouded the latest version of the Muse CC and it doesn't work well, it freezes all the time, in particular with the tools. Example the selection tool doesen't wor at all.

I just downlouded the latest version of the Muse CC and it doesn't work well, it freezes all the time, in particular with the tools. Example the selection tool doesn't wor at all. Is there any solution for this problem?

Hi!
I restarted the computer, but the same issue happens again. When I move my mouse over some object or tool, it doesn’t come active at all (only some of the tools works) When I try to change “site properties”, I can’t choose tablet or phone mode or even I can’t select the checkboxes, only thing what I can do is change the numbers (high and width) . After all the main problem is that I can’t select some of the items or functions by mouse, but only by the keyboard.

I have Adobe Acrobat 9.5.4 installed on my computer and it doesn't work when PDFing

I have Adobe Acrobat 9.5.4 installed on my computer and it doesn't work when PDFing my document using Microft Word 2010. I have tried using the tab add-in, but it doesn't respond either. The only way to convert my document is to save it as a .pdf from the save as drop down box. I need to be able to have the full functionability of creating a PDF document with the tabs and links working.
Please help!

From OFFICE 2010 you either have to have AA X or just print to the Adobe PDF printer. You give no information on your operating system or specifically what you mean by PDFing -- there are multiple ways to create a PDF from a WORD document and you have given no information. However, in this case your only choice is to print to the Adobe PDF printer. Otherwise, you need to upgrade Acrobat.

Function app.mailmsg doesn't work in Acrobat 9.4.2.220

Hello all:
Today I update Acrobat 9 from 9.3 to 9.4.
I find the function app.mailMsg() doesn't work any more.
when I use app.mailMsg() in Javascript, the Acrobat will be aborted and send Error Report.
Is anyone able to help me with this?
Many thanks!

I have tried your suggestion (for example cPdfAVDoc->FindTextA(WideString("R1").c_bstr(), 0, 0, 1);
but the result is the same.
Searching directly in the find window of the Acrobat in my application obviously all works correctly. But my target is to search from an external button.
Thanks

Fn+F5 function and touchpad doesn't work correctly on Satellite A series

Similar Messages

Maybe you are looking for