FN-F5 toggles both OSD and flight mode

On my X230 with Windows 8.1 pro, I installed the hotkey integration package in Windows 7 compatibility mode. The result is that FN-F5 seems to perform two competing actions simultaneously, or sometimes only a random one of the two - it sometimes launches the classic "TpFnF5.exe" OSD, which is what I want. Many times, it also toggles airplane mode and pops up the Metro wireless settings tab on the right side of the screen, which is NOT what I want. It would seem the keystroke is intercepted by two different apps?
I would like FN-F5 to behave the same way as on Windows 7 - show an osd menu and let me choose what I want to do. Any hints, anyone with similar problems?
The BIOS is from June if that matters.

I have a similar problem. I have T440s with WWAN module Sierra EM7345 and when I try to turn off WWAN module with button in F8 / FN+F5 utility the utility freezes and exits. I hava Windows 7 x64 Enterprise. I tried to reinstall the drivers for WWAN, the hotkey utility etc. and nothing helped. Does anyone know a solution for this problem. Tnx.

Similar Messages

My phone automatically toggles between silent and ringer mode. How to fix ?

my phone automatically toggles between silent and ringer mode. How to fix ?

Hey there Sam1011,
It sounds like you are not flipping the side switch but the phone keeps muting and unmuting by itself.
I would start by toggling the side switch manually to mute, then unmute. Then evaluate it for a bit. If the issue persists, reset the phone with this article and test the issue.
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If your device stops responding, you can reset it by pressing and holding both the Sleep/Wake and Home buttons for at least ten seconds, until the Apple logo appears
If the issue persists I would next backup your phone to iTunes and then restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
All the best,
Sterling

My iPhone is lost and flight mode is activated - can the cellular company remotely disactivate this to find it ?

my iPhone is lost and flight mode is activated - wifi is enabled but I dont have a data package can the cellular company remotely disactivate this to find it ?

So basically - I'm bunched ??

FireFox 4 Crashes When Started (Both Normal and Safe Mode)

When I open up FireFox 4 (both in normal mode and safe mode) it crashes within a few seconds. It is a fresh install of FireFox 4 but I also have FireFox 3.6 installed as well. The report that was given is:
Add-ons: [email protected]:1.0.6,{5F590AA2-1221-4113-A6F4-A4BB62414FAC}:0.45.6.20100202.1, :1.2,[email protected]:1.0rc1,{8545daff-ad1e-493f-a37e-eed1ac79682b}:1.0,[email protected]:6.0,{972ce4c6-7e08-4474-a285-3208198ce6fd}:4.0b1
BuildID: 20100630141702
CrashTime: 1279002364
EMCheckCompatibility: true
Email: [email protected]
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1278990773
ProductName: Firefox
ReleaseChannel: beta
SecondsSinceLastCrash: 38
StartupTime: 1279002344
Theme: classic/1.0
Throttleable: 1
URL: http://en-us.start3.mozilla.com/firefox?client=firefox-a&rls=org.mozilla:en-US:official
Vendor: Mozilla
Version: 4.0b1
I have Windows 7 32bit

1. You have a pre-release Beta 1 version of what will become Firefox 4 in like 5 or 6 months. Unless you are intending to test it for flaws and report those flaws to help in the development process, don't use it.
2. Did you create a new Profile for 4.0b1, and are you using that Profile with it? ''That isn't done automatically when you install 4.0b1, and those of us who have been doing the "testing" for many years consider a new Profile as the basis of doing out testing.''
[http://support.mozilla.com/en-US/kb/Managing+Profiles]
IMO, Mozilla is making a huge mistake by directly offering these beta versions to the general public.
Also IMO. if you want to play with 4.0b1, use the Portable Firefox 4.0beta version to minimize any conflicts with a currently installed version of Firefox, and to eliminate the need for creating a new Profile for 4.0 Beta #:
Download Firefox Portable Test to your hard drive and double click the '''FirefoxPortableTest_4.0_Beta_#_English.paf.exe''' file. The entire installation (including a new Profile for "Portable") will be self-contained in the \Program Files\FirefoxPortableTest\ folder and won't interfere with an "official" version that you already have installed. Your Profile will be in the \Program Files\FirefoxPortableTest\Data\profile\ folder.
The "down side" is that Firefox Portable won't launch if any other version of Firefox is already running.
[http://portableapps.com/apps/internet/firefox_portable/test]

N8 and Flight Mode?

Hello
My old Nokia 6300 had an option - Flight Mode, where the phone would disconnect the radio and other transmission possibilities that might interfere with the planes eletronic systems.
Some say it's a myth that such interference occurs - some don't. But just to be safe.
Is there such an option with the N8 or do you simply have to turn the phone off?
Solved!
Go to Solution.

Remember to not accept wlan connections when setting the phone to off line mode.

Option to allow filmstrip to work the same in both develop and library mode

First of all, let me say that one of the greatest features that LR2 brings to the table it the keyboard shortcuts for adjusting things in develop mode. That is the single improvement that has really made a HUGE difference in editing images the way I work.
I'm so happy to be able to get almost everything on the keyboard, that I wanted to point this out.
When in library mode, I can select a series of images in a row using shift + an arrow key. When I'm done adjusting the images, I can press the right arrow key, and I've now effectively deselected all the previous images, and gone on to the next one. This is intuitive and makes sense to me.
But in Develop mode, pressing the right arrow key swings me back around to the first image on the left.
Perhaps for the way some people works, this makes a lot of sense. For me, there's no reason that I would need to do this.
Of course I can deselect all photos (apple-D), but then to get back on track, I have to go to the mouse to select the next image. I would like the option of having the filmstrip act the same way in both modes.
Another solution would be to continue to allow the "Select only active photo" shortcut that is available in Library mode, but for some reason is not available in Develop mode.
Yes, this is a small change, but I feel like things are getting so close to perfect that I wanted to chime in with something that in the end I think will really help to speed up people who have to work through and adjust a large number of images.

Hi,
If the songs were purchased from itunes, I suggest that you delete the tracks from your itunes library and move to trash (providing you live in a country that permits redownloading). See http://support.apple.com/kb/PH12283.
Jim

My IMac version 10.6.8 with Intel core duo beeps and turns off unexpectedly in both Mac and Windows mode. How do I fix this?

My IMac turns off unexpectedly in both Mac & Windows mode. I've repaired disc and permissions using the Snow Leopard install disk and cleared the cache without help. Any ideas how to prevent this?

The HAT test detected no problems. Perhaps one of the peripherals, e.g., the backup disk, is causing the problem. I'll try to run the MAC without peripherals for a few days and see what happens, unless you have other suggestions.
Thanks

Pixelated image in both Loupe and Developp modes (LR3.2)

I wonder if you also observe the issue:
Often when making any kind of changes to the image,it appears probably for performance reason extremely pixelated, as if blurred. But when I zoom-in and zoom-out, or add-and-remove lens profile, LR renders the image in a good resolution.
I found no any specific "setup" option for this in the Lightroom menus, nor a hint to some sort of rendering mode in the manual.
Is this phenomenon observed by others as well?
Thomas

Yes, since 3.0. A well known and much discussed bug.
http://forums.adobe.com/message/2899461?tstart=0#2899461
http://forums.adobe.com/thread/658701?tstart=30

Firefox crashes when I open in both regular and safe mode, i am on windows vista help!

The crash ID is
bp-319da289-3ff9-4ac8-943a-c15462110923

The problem began because my computer had to be sent in because it wouldnt turn on so i had to get it fixed they replaced the motherboard this was the second time the motherboard was replaced and once they did that my firefox hasnt worked the same. I can go on google chrome but thats not what i prefer to use.
& when i right click on firefox it says troubleshoot so im assuming its built in to my computer. im not sure.
I tried the profile manager to create a new profile and that has seemed to work so far. No crashing but it does freeze when i got to facebook and then i have to click ctr alt delete to open task manager to end firefox. It happened twice, the third time i went to google, then twitter and it didnt freeze. I then went to youtube and it froze. So Facebook and youtube make it freeze. Any idea why it does that?
& thank you so much for helping and responding to me.

I turned on my iMac on 10.6.8 and it had a greenish fuzzy screen on normal boot and I can't see anything and both recovery and safe modes work but glitchy vetical bars similar to jail bars because of thier color. What do I do!?

My iMac is giving me a real bad glitchy screen. I've tried wiping my hard drive and installing mavericks, but it didn't work. I restored from time machine and it worked for a few hours an then I was back to square one. How do I fix it!?

What model of iMac do you have? If it's a 2011 27" iMac with the AMD Radeon HD 6970M graphics card it might quality for this recall:iMac (27-inch): AMD Radeon 6970M Video Card Replacement Program - Apple Support.

E72 - How to toggle between portrait and landscape...

Some games refuse to run by displaying "This game is not supported in landscape mode. Please turn your handset to portrait mode".
How can I toggle between landscape and portrait modes in Nokia E72?

You can't do that because of the screen orientation which is landscape only in case of E72, E71, E5.
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

Firefox 19 crashes on startup in normal and safe modes.

upon startup, ff19 crashes in both normal and safe modes. I've disabled all add ons and extensions.
XP Pro sp3.
It started crashing occaisionally, then increasingly more often, now, upon startup.
I tried reloading ff19.
I can't start ff with the -p command.
Crash ID: bp-89fc95f5-6efb-4c72-8721-fbf1b2110906
1361302409
1360392309
1358921494
1357934458
1354939166

its not correct crash id.
We're sorry to hear that your Firefox seems to be crashing when you open it. Please perform the following steps to give us a crash report ID that helps us find out more about the cause of the crash.
#Press the following shortcut to get a Run window: [Windows] + [R]. This should bring up a window that contains a text field.
#In that text field, enter %APPDATA% and press Enter. An explorer window should open.
#From that explorer window, double-click on the ''Mozilla'' folder, then double-click on ''Firefox'' and then on ''Crash reports''. Double-click on ''submitted''.
#Now, you should see a list of files that contain reports. Go to ''View'' > ''Arrange Icons by'' > ''Modified'' to get the most recent files at the top of the window.
#Open the most recent 5 files with a text editor and copy the IDs.
#Paste each ID with '''bp-''' into the reply window on the forums.
Thanks in advance!
You can find more information and troubleshooting steps in the [[Firefox crashes]] article.

How to use a single page for create and update mode.

Hi,
I need to develop a single page to be used for both create and update modes.
I am going to use a variable MODE
and i will set this in the emp summary page.
Based on the button clicked by the user i have to render the JSF page.
For tis if the user selects a perticular and cliks on update thn i will pass the empno to the next.
so there in the next i will appy a ViewCreiteria on my View Obj to fetch only that row so that only that emp will be displayed ion update mode.
This is working fione for me.
So now the issue is
when the user clicks on CreatEmp button.
i need to enable my VO for insert operations.
for this i wrote the code like this in the beforePhase event
FacesContext ctx = FacesContext.getCurrentInstance();
ValueBinding valBinding = ctx.getApplication().createValueBinding("#{data}");
BindingContext bContext = (BindingContext) valBinding.getValue(ctx);
DCDataControl dcControl = bContext.findDataControl("DataControl");
Application app = ctx.getApplication();
ApplicationModule am = (ApplicationModule) dcControl.getDataProvider();
System.out.println("After Appmodule initiation");
// get the VO reference and initiate the query
System.out.println("Before Page VO initiation");
PrismDmPageSectionViewImpl vo = (ViewImpl)am.findViewObject("View");
//ViewRowImpl row = (ViewRowImpl) vo.createRow();
/* TO CREATE AN EMPTY ROW*/
Row row=vo.createRow();
System.out.println("New Row is created");
//vo.createKey(row);
vo.insertRow(row);
vo.setCurrentRow(row);
By doing this a new empty page is rendered.
But when i fill up the values and click on ok.. i am getting the error like this..
JBO-27023: Failed to validate all rows in a transaction.
JBO-27027: Missing mandatory attributes for a row with key null of type View3
JBO-27014: Attribute Id in View3 is required
JBO-27014: Attribute PageeId in View3 is required
Please point me out where i am missing.
Thanks

Hi,
In my opinion you are over complicating things.
This is what I do for using the sme page as both create and update without all this code.
1) Create a browse page containing a an adf table with a select one component bound to your view object.
2) Create an additional edit page containing only an edit form containing fields of your view object that your users must enter in order to add or edit rows.
3) Link the pages in the JSF diagram with an "edit" navigation case from browse to edit page and a "return" navigation case from edit to browse (make sure that redirect option is NOT set on both cases)
4) Remove the submit button from the edit page and add two application module bindings for the commit and rollback operations as command buttons in the form footer facet. Make sure that both buttons has an action of return and that their disabled property is set to false. You will probably change their labels to ok and cancel respectively.
5) Drop a create action for your view object from the data control palette inside your page as a command button and set the action property to edit also.
3) Set the action property of the view button to edit
This should basically work without any code from your part. -- at least it does so for me -- if you like to make it a bit more funcy you may add am action listener inside your buttons and set a requeScope variable for example #{requestScope.editing} to true or false depending on the button clicked. Then add a title to your page with a value like #{requestScope.editing == true ? 'Editing record' : 'Adding a new record'}..
Hope that helps.
Thanassis

Captivate 5.5 Template -- Settings for Demo and Training modes

Hi
I am trying to create a Captivate 5.5 template for our simulations which will be captured in both Demonstration and Training modes.
In the template file, I go to Edit > Preferences > Modes, select the both the modes (from the drop-down list) and make required settings, and save the template.
Now, when I try to record a new project based on this template, I am asked to select any one of the modes. As a result, I get only one type of output. How to get both modes in one go? Is there a workaround?
Thanks for your help.

You'll need to add your simulation capture slides to the template AFTER capturing the two outputs. The template can only really be used as a shell to add introduction and conclusions, as well as quizzing etc.
Since (as Lieve points out) you end up with separate files for each different output, you'll also need to use the templates to create a shell project for each different output, and then paste the slides from the captures into the shell as it were.
Quite frankly, you're better off doing things this way anyway (capturing first and then pasting the capture slides into another shell project) because in any capture project you need to do quite a bit of editing and culling of duplicates or redundant captures. It's quicker and easier to do this editing when the project file is smaller. So what I do is clean up my captures first to get down to the minimum number of slides required for the simulation, and then paste those slides into my project file generated from the template. I do the copy/paste after culling out the unnecessary slides, but before saving the capture file. That way, I always have all of the original captures as a backup in case I went too far in the culling. Only after the project has been finalised to I go back and delete the original captures.

Reporting Services in both SharePoint 2013 connected and native mode?

Is it possible to configure Reporting Services (SQL Server 2014) to support both SharePoint 2013 connected mode and local Report Server in native mode on the same server using multiple instances of RS? The reason for this setup is to avoid having to purchase
SharePoint Enterprise CALs for other users than analysts and still be able to publish standard reports to all employees.
Management and analysts -> Custom reports published through SharePoint 2013 Enterprise (SP2013 ECALs and SQL Server 2014 core license). Data alerts and Power View enabled if possible.
All employees -> Standard reports published through Native Mode Report Server (SQL Server 2014 core license). Possible subscriptions.
I find the official documentation a bit lacking in this area but can't find anything stating against the above. It would be greatly appreciated if someone could confirm before planning the installs.
What I'm aiming for is somewhat similar to the "2 Tier Topology" described at: Example
License Topologies and Costs for SQL Server 2014 Self-Service Business Intelligence
With the difference that there is a separate SQL Server 2014 server used both by SharePoint and as a standalone BI-server.
SharePoint EE + SQL Server 2014 EE
Excel Services
SSRS Add-in (Reporting Services, Power View)
SQL Server DB for SP Content, Configuration and Service Application DB:s
SQL Server 2014 EE - SharePoint + Standalone for BI
SSRS SharePoint Mode
SSRS Native Mode
SSAS (Not in SharePoint mode, skipping PowerPivot for now. Would Power View still work?)
SQL Server DB for Data Warehouse
= 1 x SharePoint EE Server Licence, 2 x SQL Server 2014 EE Server Licenses?
Deployment
Topologies for SQL Server BI Features in SharePoint - Actually gives a good overview in the section "PowerPivot for SharePoint
2013 and Reporting Services Three Server Deployment". Just remove PowerPivot Service from Server 1 and change the Analysis Services in Server 2 to a regular native multidimensional mode. Server 2 would also be used for native Reporting Services.
Fallback or even beneficial option to install SSRS in SharePoint mode on the SQL Server instance used for content and configuration?

Hi Daniel Wikar,
As per my understanding, you want to install two SQL Server instances on the same server, and configure one of the Reporting Services to SharePoint integrated mode, another to native mode.
According to my knowledge, multiple instances of Reporting Services on the same computer, where one instance runs in SharePoint integrated mode and the other instance runs in native mode is supported. But we must run all report server instances at the same
level. For example, if we are using SQL Server 2014, all report server instances must be SQL Server 2014.
Besides, Analysis Services and Reporting Services can be installed as standalone servers, in scale-out configurations, or as shared service applications in a SharePoint farm. Installing the services in a farm enables BI features that are only available in
SharePoint, including PowerPivot for SharePoint and Power View.
For more information about Feature Comparison of SharePoint and Native Mode and Supported and Unsupported Configurations, please refer to the following documents:
http://msdn.microsoft.com/en-us/library/ms157231.aspx
http://technet.microsoft.com/en-US/library/bb510781(v=SQL.105).aspx
For detailed information regarding to the license issue, please call
1-800-426-9400,
Monday through Friday, 6:00 A.M. to 6:00 P.M. (Pacific Time) to speak directly to a Microsoft licensing specialist. For international customers, please use the Guide to Worldwide Microsoft Licensing Sites to find contact information in your locations.
You can also visit the following site for more information and support on licensing issues:
http://www.microsoft.com/licensing/mla/default.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.

FN-F5 toggles both OSD and flight mode

Similar Messages

Maybe you are looking for