FN+F8 WLAN Aktivation ist not possible. How does ist work?

Fn F8 doenst reakt. FN-Key is witout funktion. How do I aktivate this WLAN-Key? Is there a go around?

Hi
What notebook and what system you are using?
The FN keys require additional installation of Toshiba software but this depends on the system which is installed on the notebook.

Similar Messages

In Mac Mail on OS 10.5.8 I am receiving bogus emails which claim to be sent by people in my address book, but actually are not. How does this happen and how can I correct this problem

n Mac Mail on OS 10.5.8 I am receiving bogus emails which claim to be sent by people in my address book, but actually are not. How does this happen and how can I correct this problem

You said:
I am receiving bogus emails which claim to be sent by people in my address book, but actually are not.
...and:
Are you saying that my address book has not been hacked into? That others are getting these email addresses from another source?
This confuses me. Are you saying that you are receiving bogus e-mails from some of your contacts, or are you saying that they are receiving bogus e-mails from you?
If the latter, there are a number of reasons that people might be getting e-mail from you. Malware, though technically possible, is extremely unlikely. See Someone is sending messages from my e-mail address!
If the former, that's rather unusual. The only decent explanation I can think of is that a bunch of your Windows-using contacts got infected with something and their machines are being used to spam everyone in their contact lists, which would include you.

ABNAN- Posting not possible (Asset does not manage postable areas)

Hi Experts,
I am trying to do a post capitalization creating a new asset using transaction ABNAN with the transaction type 400.
I get the Error " Posting not possible (Asset does not manage postable areas) "
Can some one help me with this.
Thanks in Advance
Vijayanth

Dear,
Check Asset master if it has depreciaiton areas activated.
Regards,
Chintan Joshi.

Itunes 11.1.5 will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message? How does one work around this?

Itunes 11.1.5 (MacBook Pro,OS 10.6.8) will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message? How does one work around this?

Just reboot your laptop... While its rebooting try to reboot your phone also by holding the home and power buttonn for 10-15 seconds...When your phone is turned off try to connect it to iTunes and it will recognize your phone in recovery mode.
If you have the .ipsw file for iOS 7.0.6 saved in your desktop then in itunes press shift and click on Restore.
Select the ipsw file and let it restore.
If you dont have it downloaded then simply click on restore.
I hope it works
Cheers !

With PS 7 create new Place two objects on the new file then you may cut copy and paste Cs2 create new place two object on the new file Cut is not available how does one cut and paste in new file

With PS 7
create new
Place two objects on the new file
then you may cut copy and paste
Cs2
create new
place two object on the new file
Cut is not available how does one cut and paste in new file

If your using File>Place then photoshop cs2 creates what's known as Smart Objects, which photoshop 7 didn't have.
In photoshop cs2 you can rasterize the smart objects and that should make the Cut function available.
Select both placed layers, right click on the area to the right of the tumbnail and select Rasterize Layers.
If in photoshop cs2 you to Help>Photoshop Help and look under Layers>Smart Objects, that should give you a good overview of what smart objects are.

UPC_F104 Entry not possible, var does not have replacement type user-spec.

Hi,
On of my exit variable keeps issuing me the following message when selecting a value:
UPC_F104 Entry not possible, var does not have replacement type user-spec. vals
This exit variable is based on other variables (non-user specific). The indicator 'Restriction of values required by user' is flagged.
Any idea what might be the issue ?
Thanks
David

David,
User exit variables won't work if there are multiple rows of values being derived incase 'Restriction of values required by user' is flagged.
Make sure that derivation of variable value is restricted to only one row.
if you have a need to derive multiple rows of values, simply uncheck the flag 'Restriction of values required by user' & you will be good to go.
hope it helps.

Corecell, how does it work?

Hello!
I'm being puzzled by Corecell features. MSI web pages tell me that Corecell has four different settings (Speedster, Buzz free etc.). I have installed Core Center (ver. 1.6.1.0) but there is no possibility to change into Buzz free mode.
How can it be changed? I have found fan controls and auto-button but do I have to make settings by my self? Auto-button does not have any effect!
Thanks in advance for your help!
Niko
system specs:
Antec 380W True-Power
MSI KT6 FISR
AMD Athlon XP 2600+ Barton
512Mb DDR400
80Gb Samsung S-ATA HDD

You gotta throw use a bone here... How does what work? More info please.

SAP CRM Interactive reporting Enhancement Workbench - How does it work?

Hi Everyone,
I am trying to enhance the SAP given reporting areas in CRM Interactive Reporting tool. I have the SAP documentation, I know I have to use transaction code CRMD_IREW; but I am not sure of the rest of the steps SAP has given.
Does anyone has any experience with this; can anyone share their thoughts and possible configuration steps and if possible please give a brief overview of how the fields get added to the reporting area, do they get added to the datasources first and then we need to manually add them to the virtual cubes and also in BEx query and then it gets reflected in Reporting area or how does it work?
Any inputs will be greatly appreciated!
Thanks & Regards,
SRV

Hi,
In general, we add enhanced field to extract structure by appending method.
later we can implement logic at COMD or by using BADI to fill the data for added field.
do test run at RSA3 and replicate into bw side.
About CMOD Logic, WIth help abap epxert you need to find relation between data source base tables and added field base table. then only we can fill data to into it.
Can we know what is your data source?
Which field you want add from which table?
Thanks

How does this work?

This is not a complaint, but a confused sigh of admiration. I've got an email account at the university where I teach. When I got my iBook, it took me a while, and a few conversations with IT at the school, to get this account working in the Mail application. (Since I have a Verizon DSL at home, I had to include that SMTP as the outgoing server.) Anyway, I synched this mail account (along with my AOL and .Mac accounts) onto the iPhone, and it works perfectly, both incoming and outgoing. I didn't have to change any of the settings. I thought I was computer savvy, but I can't wrap my mind around this. It seems like magic. How does it work?

The sync process with iTunes transfers the email account settings (for your chosen accounts via your iPhone sync preferences) from the Mail application on your Mac to the iPhone's email application.
The iPhone is running OS X and the iPhone's email client can be considered a mobile version of the Mail application.

My iPhone was stolen and I have contacted the police who are using the meid number to locate. How does this work and what are my chances of getting the phone back?

My iPhone was stolen. I used Find My iPhone app to lock it and display a message. The phone has not connected to the internet to locate it. I contacted the police and they have taken my meid number. How does this work and what are my chances of getting the phone back? Are there other ways the theif can use it. I was told once they put in a new sim card and use it, whatever software the police have, it will show up.

Honestly? In the US (I can't speak to other countries, though I doubt it works much differently in a lot of the world) The police took your report and filed it either in their computers or, on paper. They will now not think of this again. The only time it will cross anyones mind is if, in the course of entering information into evidence about items recovered or seized at a crime scene, the serial number of an iPhone that was found/seized happens to match yours, in which case you will be contacted.
The police in the US can and will do nothing to 'blok' the phone and it's not worth their time to try and locate it unless you know for a fact that it was stolen by a big time drug lord, master criminal, or some other such prime target and they can get a court order to track the location of the phone in order to locate this individual for your own purposes. If they do that, they'll probably keep him under surveilance for a year or so before they act.
Basically, the police don't care about your phone. If they find it, they will give it back to you. They are not, however, going to go looking for it. They have better things to do.
I'm sorry, but that's the way it is.

Was told a USB device would create a PDF automatically from the data contained within when plugged into my USB port. Doesn't seem to work. How does this work and how can I fix the device I received?

Acrobat is not on the USB device - only Adobe Reader needed on the PC. How does this work? How can I fix this device if at all?

You need to ask the people who sold it to you. Doesn't sound like it has anything to do with Reader.
However, you should be wary of devices that automatically try to open files when plugged in. They can also infect your computers with all kinds of viruses or malware.

I would like to know which app/software in MAC gives us the same feature that is provided by System Restore in Windows, and how does that work

I would like to know which app/software in MAC gives us the same feature that is provided by System Restore in Windows, and how does that work.

Time Machine is one such program, although it is a recursive backup program which offers limited archive capability, based on the capacity of the backup destination, and it requires you set it up before you start editing your files. Some programs are also Versions aware, which offers a kind of restore capability by file. Again needs to be setup before you start editing.
Just a for-your-info:
Mac is not an acronym, it is a nickname for Macintosh.

What is efax and how does it work?

Hi!
eFax® is a service provided by eFax®, not Hewlett-Packard, that allows you to send and receive faxes using the Internet rather than a phone line. eFax® is easy to use, but it is different than a typical phone-based fax machine. You don't require a phone line to use it, so you don't have to worry about busy signals and you can place your printer where you want it, not where the phone jacks are located! The fax number you are provided will not typically be a local number, and may even be in a different country. You will receive 20 incoming and 20 outgoing fax pages per month for free with this service. Your page counts will reset at midnight Pacific Time on the first of each month. You can also subscribe to eFax® Plus to obtain additional pages per month by visiting: http://www.eFax.com/products/internet-fax.
How does it work?
eFax® uses the printer Internet connection to send and receive faxes. When you send a fax, it is sent over the Internet to the eFax® server and then eFax® sends your fax to the recipient's fax machine over a standard phone line.
Your faxes are received in a similar manner, but the order is reversed. The sender sends the fax over a phone line to eFax® and then eFax® sends the fax to your printer using HP's ePrint service.
This question was solved.
View Solution.

Hi Im_cheesecake,
Great information, if you don't mind I just wanted to piggy back off of your post, to clear any potential confusion.
The 20 free incoming & 20 free outgoing faxes are with HP printer's that include the eFax service print app. As of now, we have three printer series' that include the pre-installed eFax print app: HP Photosmart 7510 Series, HP Envy 110 Series, and the HP Photosmart eStation C510a.
eFax also has a free plan which allows you to receive a limited number of faxes but does not allow you to send any faxes. If you exceed the number of received faxes allowed, eFax will prompt you to upgrade to a paying account. Here are the main details of the free plan:
One remote (i.e. non-local) eFax number
Area code/prefix is selected by eFax and cannot be changed (unless you upgrade to a paid account)
20 incoming fax pages per month (receive-only)
You are prompted to upgrade to a paying account if you exceed 20 incoming pages, or if you need send capability.
Say "Thanks" by clicking the blue Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"; therefore, it's easier for others to find.
I am an HP employee.

Hi i want to send an ipad of a gift to a friend in italy, can it be done? will the wifi and 3g still work? also how does it work for a warrenty?

hi i want to send an ipad of a gift to a friend in italy, can it be done? will the wifi and 3g still work? also how does it work for a warrenty?

WiFi will work, cellular will work but they may not be able to access LTE, they will have to send it back to you for the warranty work.

JDBC Adapter:- How does it work??

Dear Friends,
I would like to know the nuts and bolts of JDBC adapter.
1.)How does it work internally?Internally what does sap use?
2.)In my scenario i just need to access a sap table so Can i write my Java JDBC program to access it.?
3.)Is there any other way to sent data from Idocs to map to a external database with out using XI.?
thx,
jeevan

Hi Jeevan,
As far as the JDBC adapter goes, internally it uses, obviously JDBC (Java DataBase Connectivity). Thus all the calls from this adapter are internally SQL Queries (Either Select, Insert, Update, Delete, Execute Stored Procedure) that are sent using Java JDBC API.
In Sender Configuration, it needs a Select and an Update query to be configured into it. It polls the External Database at specific intervals (Polling Interval in the Channel Configuration),i.e., it connects to the Database via a JDBC Connection and runs the select query. The data from the query is sent to XI as an XML Document. The update query is used to update the DB such that the same data is not picked again in the next poll. This is generally done through a status field. The select query's Where clause should pick records with one status and the update should change all those statuses so that the select does not pick them again. Click [Here|http://help.sap.com/saphelp_nw70/helpdata/EN/22/b4d13b633f7748b4d34f3191529946/frameset.htm|SAP Help on JDBC Sender Adapter] for more details, including the format of the XML file sent.
In receiver configuration, the channels creates SQL statements from the XML Document it receives. This can be either Select, Insert, Update, Delete or Stored Procedure Call Statements. This requires you to give the receiver channel an XML Document in a pre-defined Schema. Click [Here|http://help.sap.com/saphelp_nw70/helpdata/EN/22/b4d13b633f7748b4d34f3191529946/frameset.htm|SAP Help on JDBC Receiver Adapter] for more details including correct XML Schemas. Note that the kind of SQL Statement generated (Select, Update, etc) is dependent on the schema provided.
Hope this was helpful!!!
Thanks,
Guru

The special offer for the printer that is going on with a Mac, how does that work? Is it true i can get a free printer?

The special offer for the printer that is going on with a Mac, how does that work? Is it true i can get a free printer?

you pay for it up front, and they give you a rebate or $99, so if you buy a $99 printer from them (Epson Stylus NX430 Small-in-One Color Inkjet Printer $99.95) then the printer becomes free. You can not get this deal unless you also buy a mac with it.

FN+F8 WLAN Aktivation ist not possible. How does ist work?

Similar Messages

Maybe you are looking for