FN key/flashcards/toucpad not working - Win7/Vista

Hello,
I have installed both Win7 and Vista in an attempt to make my touchpad work. At this point I have installed and reinstalled all the touchpad / VAP drivers on both operating systems. I don't seem to get any results. There's one 0.5 second moment where my touchpad works: when I change the mouse sensitivity in the touchpad driver and click on OK during the time that it takes for the driver to apply the change the touchpad works, but that's like 0,5 seconds - it proves that the touchpad is fine from a hardware perspective. (I think ?)
One thing though: when I press Fn+F10 or Fn+F11 it actually changes the keyboard layout, so that's one scenario where Fn key works for me.
Although pressing Fn doesn't bring up with the flashcards.
Anything you could advice?
Thanks.

On a clean (custom) install of win7 32 on Satellite Pro A200GE-26Q, I used the tool from the USA webiste: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/navShell.jsp?cf=Windows7
[nb separate toshiba-driver & other software installer programs depending on whether you are doing a clean install or upgrading from Vista.]
It detected that I have a Satellite Pro A200 and installed bluetooth, card reader, chipset, turbo memory, and toshiba value added pack. Windows itself had a driver for the ATI Mobility HD 2600. After all of that, the fn key hotkeys were still not working, and the vista version of the Flash Card support utility would just crash. Still no drivers posted on the downloads site for my model, but this version (posted for NB200 model) worked fine (in fact, much better performance than the old version under Vista): http://support1.toshiba-tro.de/tedd-files2/0/fcsu-20090930160445.ZIP
Also, ALPs touchpad worked with the generic windows driver, but without scrolling support. This version seems to be working so far: http://support1.toshiba-tro.de/tedd-files2/0/tpdrv-20091015152335.zip published for Satellite A350, Satellite Pro L550D, Satellite L550D, Satellite L555D, Satellite Pro L500D, Satellite L500D
Of course, try any of this at your own risk! But unless/until Toshiba is clearer about whether we can expect anything more for models more than 18 months old, looks like this is the best on offer...

Similar Messages

  • Satellite C850D-115 / Win7 - the special funktion key mode ist not working

    Hi,
    the special funktion key mode ist not working, although I tried everything in Bios and softare " Toshiba Hardware setup utility".
    I still need to press "FN + " to use the special function keys, while enabled bios mode!
    The special function mode was never working, I have no more ideas. You...?

    As far as I know its no matter what system you are using. The special function key mode should work with Win 7 and Win 8.
    Here an Toshiba documentation.
    [How to change the Function Keys Mode|http://aps2.toshiba-tro.de/kb0/HTD2503B90001R01.htm]
    You bought this notebook without an preinstalled system. Right?
    And you installed an clean Win 7 on this Satellite C850D-115?
    Please ensure that all available drivers for C850D PSC9UE are installed. This includes the VAP (value added package), Hardware Setup, and others
    There is also new BIOS update v6.50-WIN
    Be sure your BIOS is up to date!

  • Appended Key figure is not working in Delta reverse record

    Dear All,
    I have enhanced 2LIS_11_VASCL datasource, to pull value from condition record, called Surchage.
    I have set reversal indicator for this field in my datasource. I have written code in CMOD to get this value from KONV table of that sales order.
    Now when value  is changed, delta record for this, automatically creates reversal record, but it shows new value of surcharge as negative, because that code is pulling value which currently exists in table.
    For example for order 350089 , if surchage is $ 100 .  User changes it to $200
    Then I get following record.
    Reversal Record  - $200 (This should be instead -$100 , i.e. previous value)
    New Record - $100.
    Because of this my new value is not getting updated in table.
    I can't use overwrite mode in ODS because some other technical reason.
    How can I solve this problem?
    appended Key figure is not working in Delta reverse record

    LIS have before-after delta. So ODS should be in Overwrite mode. If that is not possible.. try sorting the records in Start Routine such way that the - 100 $ is above the - 200 $ records in Data Package.
    but this is risky as it will affect other key figures for which things maybe fine. I guess you need take Data Package records in an internal table. And then sort this internal table. then you can read the internal table in update routine of this key figure.
    OR (If you are on BI 7.0) you introduce an InfoSource in between DS and DSO with Overwrite mode for this Key Figure.

  • Itunes not working with Vista Home Premium 32-bit

    Itumes 10.6.3 version will not work with Vista Home Premium. I have a 32-bit operating system. I'm not sure what to do next. It appears in trying to update it deleted the old itumes, as I can't find a copy of it when I search the computer.

    Then I installed Quicktime on its own - still get the same error 'Quicktime has stopped working;
    Okay. That will be the source of the iTunes problem. (Without a properly working QuickTime, iTunes won't work correctly.)
    Checking on things that can cause QuickTime launch errors now.
    Have you at any stage installed any Codec Packs, any copies of the programs QT Alternative, QT Lite or Storm Codec, or any media converter programs that can convert files into QuickTime readable formats?
    (I'm checking on these things because depending on the versions of the programs/codec-packs, these can install earlier versions of QuickTime componentry on a PC, which can interfere with the running of a higher version of QuickTime.)

  • My 6, 7, y, u, h, j, n, m key's are not working on my hp pavilion g6 PLEASE HELP!!!

    my 6, 7, y, u, h, j, n, m key's are not working. they used to work but even then i had to hold down one of those unresponsive keys to get the others to work now i can't use them at all!! i have to use the on screen keyboard which is really annoying but is the only way i can use my laptop
    i have a hp pavilion g6 4GB  i3 core 64 bit windows . i think the warrenty has expired as it is a refurbished laptop

    Hello momomhammed:
    I think you forgot to type in HP g6 1239as because I could not find HP g6 123sa. This is the only steps they give for your lat top. http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01458194&tmp_task=solveCategory&cc=uk&dlc=en&lc​... I would do the reset direction first then do the update drives for it. To see if that fixes the issue. If it doesn't then yout computer needs repairing. frrw.

  • X-Fi Audio - Subwoofer NOT working in Vista 32-bit Ultimate!

    <X-Fi Audio - Subwoofer NOT working in Vista 32-bit Ultimate!I I have WIndows Vista 32-bit Ultimate and Sound Blaster X-Fi Audio installed and with the factory drivers (I tried another set earlier and they did not work, so I reinstalled the original drivers which worked, at least partially). Until now I only listened to music using my headphones, but I tried today to plug-in my 5. Genius system (50W RMS) and everything works fine EXCEPT the subwoofer does not produce any sound at all!! The ONLY way to make it work is go to Control Panel -> Sound -> Speakers -> press Configure and then click the Test button in the dialog that appears (or click the subwoofer icon to make it produce a very nice bass sound - which I absolutely love, but it's the only way to make my subwoofer work!!!). Please guys, help me find out what the problem is. All help is much appreciated. Thank you!

    cipriansk7 wrote:
    Thank you my friend,I have done as you have mentioned (made sure the DLL did not stay there when I rebooted before I installed your version), and now I have the version which you have built. However, I am still unable to hear the subwoofer I am so sad... even my default on-board card supports the 5. just great, and I love the sound of that, but I was hoping for something better from Creative - instead, all I got was a soundcard I can only use with my headphones at the moment because of a faulty driver...
    Did you enable Bass Redirection?
    Run Console Launcher, click on Speakers and Headphone -> choose 5. Speakers.
    Then click on Bass (Bass Management) and enable Bass Redirection.

  • I have a macbook pro with OSX Mavericks 10.9.5 and some keys that are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys.  What's really weird is that happens randomly.  I've never spilled anything on it

    I have a macbook pro with OSX Mavericks 10.9.5 and some keys randomly are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys.  What's really weird is that happens randomly.  I've never spilled anything on it, and I can't for the life of me figure out how to fix this.  Can anyone help?  of course this happened after my warranty expired.

    **update**
    I don't know if this will help someone but I am posting this for that purpose.  In the past when I first had this problem, I'd read a post somewhere (sorry, long ago, don't have the link) where an individual was having the same problem and they stated that when the MBP got heated, that's when the keys would stop working, and they went into the MBP and jiggle some stuff around (a specific wire, I'm not electronically inclined so I know NOT of what they spake!).  Well I didn't want to do that but it always stuck in the back of my mind.  I had given up, really, and was planning to take my MBP to the apple store.  But by chance one night I left my MBP on the floor where it's cool, and when I turned it on, the problem went - poof! It seems there was some validity to the post that spoke about heat, because my problems started when I would stream foreign dramas on my MBP for hours at night, and I would hear the fan going off all the time, and in the mornings, my "p", "enter", "0", ";", and all the function keys would stop working. 
    So, maybe try keeping the MBP in a cool place when it's off.  Since I've started doing this overnight every night (keeping it on the cool floor, out of reach of any big feet), I have not had a single problem with my keyboard.
    Hopefully this might help someone.

  • I purchased photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in december 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can

    I purchased Photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in December 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can someone please tell me how i process canon 7D mk11 photos ?????. (is it possible to bypass camera raw and open the photo straight into CS5 without using camera raw first. if so how do i do that. if not how do i process pictures).
    Thank you.
    Brian in the UK.

    Photoshop by itself cannot process raw image data. That is why the Camera Raw plug-in was developed. You could try the DNG converter and convert your images to the DNG format and then the Camera Raw that you have would be able to open them. I can't recommend Lightroom because you are using Vista, and Lightroom 5 cannot be used with that operating system. It may be time for you to get a new computer and upgrade your software.

  • Home Keys on Laptop not working sometimes

    Good Day,
    Our HP Pavilion G4-2013TX's keyboard acts up sometimes. The Home keys (i.e., A S D F J K L and semi colon) keys sometimes do not work. I just have to wait a bit or furiously press them to get them to work again.
    The keys are working currently (this message is evidence.) I don't know how to invoke the error at the moment.
    Please help. I've been getting instances that I need to have a good working keyboard but the homekeys don't cooperate. A Sort of troll, actually.
    Thanks in advance,
    Matt

    Hi @MattFromPH 
    Welcome to the HP Support Forums!
    I understand that you are having trouble with your keyboard behaving intermittently. I am happy to help with this.
    As a start I include the support page for your notebook, which includes the current HP modified drivers for your notebook, and also I link the service manual, which can be helpful when it comes to cleaning if followed carefully.
    HP Pavilion g4-2013tx Notebook PC
    HP Pavilion g4 Notebook PC - Maintenance and Service Guide
    With those two resources, then check out this page and see if anything helps with your problem.
    Notebook Keyboard Troubleshooting (Windows 7)
    Cleaning your Notebook PC
    Let me know if you need any more help.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • 4gb creative zen v plus does not work in vist

    hello
    i just got one of these..and the cd provided does not work in vista..i read on the site that this model has nati've vista support then why doesnt it work for me?
    any help appreciated

    Hi,
    What do you mean by the cd does not work in vista?
    Can you tell us what happens when you try to install using the installation cd, error messages, etc?
    Try plug in your Zen V Plus to your computer, does it get detected?

  • Numeric key pad is not working, card reader is not working

        Numeric key pad is not working, card reader is not working, 

    Did you (or someone else) physically open the laptop case?
    If you did, then some cables might have gone loose inside.
    If you didn't, for the card reader, check if appropriate device drivers are installed in windows device manager.
    for the numeric keypad, first tap once on the NUM LOCK key and check.
    If this doesn't solve the problem, boot to "Safe mode", and check.

  • How to fix my iPhone keys that will not work

    When I am using my iphone keyboard, the upper row Q thru P will not work. That is in verticle mode, when laid horizontally, the R will not work.
    On the number keys, the 4 will not work. The comma key also does not work. 
    I was told that a software restore could cure this.  Also, I tried to load the new version 7 software, hoping this might help.  But the Accept option would not work when accepting the TERMS from Apple.  It seems that only works in verticle so that whole row/area does not work.

    RESET DEVICE
    Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).

  • Quick Install not working on Vista - how can I transfer pdb files to/from my Zire 31?

    I have been using Hot Sync to transfer contacts, calendar etc, but am unable to transfer my database files (pdb format) to/from my Zire 31, as the QuickInstall program does not work with Vista, and I am not aware of any other method of transferring these files.
    Can anyone help? 
    Post relates to: Zire 31

    Oops, sorry for the bad link (the must have changed it). For some reason, I can't create a valid link to the article...grr. But you can also get to it by entering Solution ID # 43851 at the bottom of the Palm Knowledgebase.
    To move the file from the card to your Zire's memory, use the Copy function in the main Menu. That is, insert the card. Open the menu from the main Launcher (home) screen. Select Copy, and you should be able to select the card as the source.
    Hope that helps clarify. Let us know...
    Post relates to: Centro (AT&T)
    Message Edited by smkranz on 08-26-2008 07:55 AM
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • Hello, I purchased design premium 4.0 German Windows  (LIZ 390232 from 22.02.2010) from my friend and wanted to installation it. However, the key code does not work. He has the PC is no longer, so he can not  disable the product key. He loaded it, but onl

    Hello, I purchased design premium 4.0 German Windows  (LIZ 390232 from 22.02.2010) from my friend and wanted to installation it. However, the key code does not work. He has the PC is no longer, so he can not  disable the product key. He loaded it, but only in Englisch (trial version?) Please help me for the next step. I have the license agreement in my hand.

    Moving this discussion to the Downloading, Installing, Setting Up forum.
    Jakobh53157856 before you begin the installation process please complete the transfer of license process to transfer the Adobe Creative software license you wish to utilize to your possession,  You can find details regarding the transfer process at Transfer an Adobe product license.

  • I purchased design premium 4.0 German Windows  from my friend and wanted to installation it. However, the key code does not work.

    I purchased design premium 4.0 German Windows  from my friend and wanted to installation it. However, the key code does not work. He has the PC is no longer, so he can not  disable the product key. He loaded it, but only in Englisch (trial version?) Please help me for the next step. I have the license agreement in my hand.

    Nobody here can help you with this. You'll need to contact Adobe directly.
    Did your friend fill out and send in the license transfer form?
    Transfer an Adobe product license

Maybe you are looking for