Fn Mod to "Call Transac"

Hi Folks,
Just now came to know the existence of such a Fn Mod mentioned below:-
ABAP4_CALL_TRANSACTION
COPF_CALL_TRANSACTION.
I did a Program which calls VF11 and on success of VF11 it will call VA02.
Added to this I had added some conditions depending on Billing Type at the required PERFORMS  in BDC.
Can I achieve the same functionality by using the above said Fn.Mods.
K.Kiran.

HEllo Kira,
Check this thread:
Calling two transaction in one Zprogram
Hope this will helps you.
Vasanth

Similar Messages

  • Running  BDC in 'A' mode when called from Enterprise portal

    HI All,
    I have created a RFC which contains a BDC program that update data in SAP R/3. The RFC is called from Enterprise portal. Is it possible to run the rfc in A(all screen display) mode while calling from EP. I have tried it but it gives following 2 errors on EP
       cm_no_data_received
       rfc_error_communication
    what changes i have to do so that i can run the BDC in 'A ' mode  when called from Enterprise portal

    it would not be related to EP administration issues but something to do with GUI usage. it is loggically fare enough not to give options of viewing the debug screen in as it might concern security issues inway the data could be edited at any point of time. Moreover the screens u see in R3 are ABAP but whereas in EP it is purely based on Java and the calls to SAP is done via JCO thus enabling ABAP functionalities in EP. Maybe for these technical reasons or constraints it wont be possibel to view the screen in EP eventhough u had ext.bp activated

  • HT1766 Upgraded iPad 2 w/IOS 7. Battery drains to 0% even with iPad in sleep mode.  Called Apple-they had me clear it.  Battery charge held that night.  Restored from iCloud. Charge not holding again.  Any similar events?  What to do?

    Upgraded iPad 2 w/IOS 7. Battery drains to 0% even with iPad in sleep mode.  Called Apple-they had me clear it.  Battery charge held that night.  Restored from iCloud. Charge not holding again.  Any similar events?  What to do?

    Upgraded iPad 2 w/IOS 7. Battery drains to 0% even with iPad in sleep mode.  Called Apple-they had me clear it.  Battery charge held that night.  Restored from iCloud. Charge not holding again.  Any similar events?  What to do?

  • HELP- Windowed mode for call of duty 4

    Hi.
    I've just brought call of duty 4 for my imac i5.
    Does anyone know how i can play this in a windowed mode so i can still do other things on my desktop at the same time.
    i've tried the command-d like someone else suggested and that doesn't work.
    Thanks

    Sarge808,
    Then you'll need to contact their support group - http://support.aspyr.com/
    Their contact information is even conveniently displayed:
    Aspyr Media, Inc.
    P. O. Box 5861
    Austin, TX 78763
    PH: 512-708-8100
    FAX: 512-708-9595
    Monday-Friday 10AM to 6PM (Central)
    You can even submit a ticket to them for further, individualized attention. The issue is with their software and as such you'll need to communicate with them.

  • Oracle form 6i in client server mode to call web service

    Hi,
    I am using oracle form 6i running in client server mode. My database version is 8.1.7.4. Now I am required to call an external web service. Is it possible to call web service without the existence of application server or web server? Please help!

    I have tried the method illustrated by the Form 10g Demo. However, when I select the Import Java Classes from the pull down menu, I have got the following error:
    PDE-UJI002 Unable to find the required Java Importer Classes.
    My Oracle Form version is as follows:
    Forms [32 Bit] Version 6.0.8.19.2 (Production)
    Oracle8i Enterprise Edition Release 8.1.7.0.0 - 64bit Production
    With the Partitioning option
    JServer Release 8.1.7.0.0 - 64bit Production
    Oracle Toolkit Version 6.0.8.19.1 (Production)
    PL/SQL Version 8.0.6.3.0 (Production)
    Oracle Procedure Builder V6.0.8.17.0 Build #863 - Production
    PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
    Oracle Query Builder 6.0.7.1.0 - Production
    Oracle Virtual Graphics System Version 6.0.5.38.0 (Production)
    Oracle Tools GUI Utilities Version 6.0.8.11.0 (Production)
    Oracle Multimedia Version 6.0.8.18.1 (Production)
    Oracle Tools Integration Version 6.0.8.18.0 (Production)
    Oracle Tools Common Area Version 6.0.8.18.0
    Oracle CORE Version 4.0.6.0.0 - Production
    Please help !

  • When in sleep mode, not calls or SMS received.

    Hello,
    When my iPhone goes into sleep mode either automatically or manually it does not receive any SMS or incoming calls. Sometimes it takes up to 10 hours for it to show the SMS or missed call. I have to leave the iPhone on constantly and turn the brightness all the way down. Any ideas as to why this is happening?

    I have missed a few calls and alarms because my iPhone, though set to ring and not in silent mode, inadvertently had the ringer volume is turned all the way down to zero. It's a bit surprising to me that when you (accidently) set the ringer volume to zero, it doesn't show that it's in silent mode, but I guess that's because the little switch isn't toggled.
    To avoid missing calls, I've set the iPhone to vibrate even in ring mode.
    But if that's not your problem, first shut the phone down, reboot, and test by calling from another phone. If that doesn't work, I'd do a reset. First sync (which backs up everything) and then reset, and everything is restored to just the way it was. You might have to sync a second time to get photos over. I have fixed a few problems with resets.
    Derek

  • Iphone switch into "headphone mode" mid-call

    hope someone can help. a few times in the last few days my iphone, in the middle of a call, will go from regular "phone" mode into thinking I have headphones in.. when i DON'T, and thus it kinda ends the call as I can no longer hear who I'm talking to and they can't hear me. it's happen twice now in the middle of business calls... VERY frustrating.
    I've tried putting a jack into the headphone port, and that worked once, but hasn't worked consistently. I've blown into the port thinking there might be dust in there, but that doesn't seem to help. and just as randomly, after the call has ended and I put the iphone down.. it randomly clicks back as if reverting back to regular mode, unassisted.
    any thoughts out there?
    thanks,
    tom
    am trying

    Sounds like you should reinstall the firmware on the iPhone. Be sure to sync your iPhone and do a manual backup (right click on the iPhone icon on the left pane in iTunes and select Backup) and also a Transfer of Purchases (right click on the iPhone icon on the left pane in iTunes and select Transfer Purchases). As long as iTunes doesn't screw anything up, all your data should be backed up now. On the main screen for the iPhone in iTunes there is a Restore button, click that and follow all the prompts. After the restore, have iTunes restore your backup and then re-sync your iPhone to reinstall all your apps, music, videos, etc.
    Let me know how that works for you. If that doesn't work, then I would take it into Apple and have them look at it.

  • To set HOTSPOT for a field in ALV-oops and when clecked should call transac

    Hi,
    I need to set HOTSPOT for a field in O/P list using ALV-oops and when clecked should take me to Transaction VA01. Please help....
    Thanks,
    Prabhu

    Hi,
         Please go through this code it may help u.
    REPORT zcls_alv_oops MESSAGE-ID z1.
    TABLES : mara.
    Types Declaration..\
    TYPES :
    BEGIN OF t_mara,
    matnr TYPE matnr,
    mtart TYPE mtart,
    maktx TYPE maktx,
    END OF t_mara,
    BEGIN OF t_marc,
    matnr TYPE matnr,
    werks TYPE werks_d,
    mtart TYPE mtart,
    maktx TYPE maktx,
    END OF t_marc.
    Internal Tables Declaration..\
    DATA :
    i_mara TYPE TABLE OF t_mara,
    i_marc TYPE TABLE OF t_marc,
    i_fcat1 TYPE lvc_t_fcat,
    i_fcat2 TYPE lvc_t_fcat.
    Constants Declaration..\
    CONSTANTS :
    c_cont1 TYPE scrfname VALUE 'CONT1',
    c_cont2 TYPE scrfname VALUE 'CONT2'.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
    SELECT-OPTIONS:
    s_matnr FOR mara-matnr NO INTERVALS.
    SELECTION-SCREEN SKIP 1.
    PARAMETERS :
    p_hotspt RADIOBUTTON GROUP r1 DEFAULT 'X',
    p_bttn RADIOBUTTON GROUP r1.
    SELECTION-SCREEN END OF BLOCK b1.
    \* Class forward referncing.
    CLASS lcl_rcvr_class DEFINITION DEFERRED.
    \* Pointers Declaration..
    DATA :
    lp_rcvr TYPE REF TO lcl_rcvr_class,
    lp_cont1 TYPE REF TO cl_gui_custom_container,
    lp_cont2 TYPE REF TO cl_gui_custom_container,
    lp_grid1 TYPE REF TO cl_gui_alv_grid,
    lp_grid2 TYPE REF TO cl_gui_alv_grid.
    \* Local Class Definiton.
    CLASS lcl_rcvr_class DEFINITION.
    PUBLIC SECTION.
    METHODS :
    hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
    IMPORTING e_row_id e_column_id es_row_no,
    handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
    IMPORTING e_row e_column.
    ENDCLASS.
    \* Local Class Implementation.
    CLASS lcl_rcvr_class IMPLEMENTATION.
    METHOD hotspot_click.
    DATA :
    wa_mara TYPE t_mara,
    wa_marc TYPE t_marc.
    DATA :
    l_index TYPE sy-tabix.
    READ TABLE i_mara INTO wa_mara INDEX e_row_id-index.
    IF sy-subrc EQ 0.
    REFRESH i_marc.
    SELECT matnr
    werks
    INTO TABLE i_marc
    FROM marc
    WHERE matnr EQ wa_mara-matnr.
    IF sy-subrc EQ 0.
    LOOP AT i_marc INTO wa_marc.
    l_index = sy-tabix.
    wa_marc-mtart = wa_mara-mtart.
    wa_marc-maktx = wa_mara-maktx.
    MODIFY i_marc FROM wa_marc INDEX l_index
    TRANSPORTING mtart maktx.
    ENDLOOP.
    CALL SCREEN 200.
    ELSE.
    MESSAGE e121 WITH text-005 wa_mara-matnr.
    ENDIF.
    ENDIF.
    ENDMETHOD.
    METHOD handle_double_click.
    DATA :
    wa_mara TYPE t_mara,
    wa_marc TYPE t_marc.
    DATA :
    l_index TYPE sy-tabix.
    READ TABLE i_mara INTO wa_mara INDEX e_row-index.
    IF sy-subrc EQ 0.
    REFRESH i_marc.
    SELECT matnr
    werks
    INTO TABLE i_marc
    FROM marc
    WHERE matnr EQ wa_mara-matnr.
    IF sy-subrc EQ 0.
    LOOP AT i_marc INTO wa_marc.
    l_index = sy-tabix.
    wa_marc-mtart = wa_mara-mtart.
    wa_marc-maktx = wa_mara-maktx.
    MODIFY i_marc FROM wa_marc INDEX l_index
    TRANSPORTING mtart maktx.
    ENDLOOP.
    CALL SCREEN 200.
    ELSE.
    MESSAGE e121 WITH text-005 wa_mara-matnr.
    ENDIF.
    ENDIF.
    ENDMETHOD.
    ENDCLASS.
    \* Start of Selection
    START-OF-SELECTION.
    \* Extract the Material Master data for the Input Material.
    SELECT a~matnr
    a~mtart
    b~maktx
    INTO TABLE i_mara
    FROM mara AS a
    INNER JOIN makt AS b
    ON a~matnr EQ b~matnr
    WHERE a~matnr IN s_matnr
    AND b~spras EQ sy-langu.
    END-OF-SELECTION.
    IF NOT i_mara\[\] IS INITIAL.
    \* Call Screen to display the Material Master data.
    CALL SCREEN 100.
    ELSE.
    MESSAGE s121 WITH text-006.
    ENDIF.
    \*& Module DISP_GRID OUTPUT
    \* text
    MODULE disp_grid OUTPUT.
    \* Build the Field catelog for Material Master data.
    PERFORM build_fcat.
    \* Display the Material Master data using ALV.
    PERFORM disp_alv.
    ENDMODULE. " DISP_GRID OUTPUT
    \*& Module USER_COMMAND_0100 INPUT
    \* text
    MODULE user_command_0100 INPUT.
    \*when exit or cancel is clicked program has to come out
    CASE sy-ucomm.
    WHEN 'EXIT' OR 'CANC'.
    LEAVE PROGRAM.
    WHEN 'BACK'.
    LEAVE TO SCREEN 0.
    ENDCASE.
    ENDMODULE. " USER_COMMAND_0100 INPUT
    \*& Form build_fcat
    \* text
    \* \--> p1 text
    \* <-\- p2 text
    FORM build_fcat.
    DATA : ws_fcat TYPE lvc_s_fcat.
    ws_fcat-fieldname = 'MATNR'.
    ws_fcat-scrtext_m = text-001.
    ws_fcat-tabname = 'I_MARA'.
    IF p_hotspt EQ 'X'.
    ws_fcat-hotspot = 'X'.
    ENDIF.
    APPEND ws_fcat TO i_fcat1.
    CLEAR ws_fcat.
    ws_fcat-fieldname = 'MTART'.
    ws_fcat-scrtext_m = text-002.
    ws_fcat-tabname = 'I_MARA'.
    APPEND ws_fcat TO i_fcat1.
    CLEAR ws_fcat.
    ws_fcat-fieldname = 'MAKTX'.
    ws_fcat-scrtext_m = text-003.
    ws_fcat-tabname = 'I_MARA'.
    APPEND ws_fcat TO i_fcat1.
    CLEAR ws_fcat.
    ENDFORM. " build_fcat
    \*& Form disp_alv
    \* text
    \* \--> p1 text
    \* <-\- p2 text
    FORM disp_alv.
    IF lp_cont1 IS INITIAL.
    \* Create the Container Object of Material Master.
    CREATE OBJECT lp_cont1
    EXPORTING
    container_name = c_cont1
    EXCEPTIONS
    cntl_error = 1
    cntl_system_error = 2
    create_error = 3
    lifetime_error = 4
    lifetime_dynpro_dynpro_link = 5
    others = 6 .
    IF sy-subrc NE 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ELSE.
    \* Create the Object for Grid of Material Master.
    CREATE OBJECT lp_grid1
    EXPORTING
    i_parent = lp_cont1
    EXCEPTIONS
    error_cntl_create = 1
    error_cntl_init = 2
    error_cntl_link = 3
    error_dp_create = 4
    others = 5.
    IF sy-subrc NE 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ELSE.
    \* Dipslay Material Master data by calling method.
    CALL METHOD lp_grid1->set_table_for_first_display
    CHANGING
    it_outtab = i_mara
    it_fieldcatalog = i_fcat1
    EXCEPTIONS
    invalid_parameter_combination = 1
    program_error = 2
    too_many_lines = 3
    OTHERS = 4.
    IF sy-subrc NE 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ELSE.
    \* Set Handler for the Hot Spot Event.
    CREATE OBJECT lp_rcvr.
    IF p_hotspt EQ 'X'.
    SET HANDLER lp_rcvr->hotspot_click FOR lp_grid1.
    ELSE.
    SET HANDLER lp_rcvr->handle_double_click FOR lp_grid1.
    ENDIF.
    ENDIF.
    ENDIF.
    ENDIF.
    ENDIF.
    ENDFORM. " disp_alv
    \*& Module STATUS_0100 OUTPUT
    \* text
    MODULE status_0100 OUTPUT.
    SET PF-STATUS 'MAIN_STAT'.
    SET TITLEBAR 'T_100'.
    ENDMODULE. " STATUS_0100 OUTPUT
    \*& Module STATUS_0200 OUTPUT
    \* text
    MODULE status_0200 OUTPUT.
    SET PF-STATUS 'PLANT_STAT'.
    SET TITLEBAR 'T_200'.
    ENDMODULE. " STATUS_0200 OUTPUT
    \*& Module DISP_GRID_plant OUTPUT
    \* text
    MODULE disp_grid_plant OUTPUT.
    \* Build the Field catelog for Material Plant data.
    PERFORM build_fcat_plant.
    \* Display the Material Master Plant data using ALV.
    PERFORM disp_alv_plant.
    ENDMODULE. " DISP_GRID_plant OUTPUT
    \*& Module USER_COMMAND_0200 INPUT
    \* text
    MODULE user_command_0200 INPUT.
    \*when exit or cancel is clicked program has to come out
    CASE sy-ucomm.
    WHEN 'EXIT' OR 'CANC'.
    LEAVE PROGRAM.
    WHEN 'BACK'.
    LEAVE TO SCREEN 0.
    ENDCASE.
    ENDMODULE. " USER_COMMAND_0200 INPUT
    \*& Form build_fcat_plant
    \* text
    \* \--> p1 text
    \* <-\- p2 text
    FORM build_fcat_plant.
    DATA : ws_fcat TYPE lvc_s_fcat.
    ws_fcat-fieldname = 'MATNR'.
    ws_fcat-scrtext_m = text-001.
    ws_fcat-tabname = 'I_MARC'.
    APPEND ws_fcat TO i_fcat2.
    CLEAR ws_fcat.
    ws_fcat-fieldname = 'WERKS'.
    ws_fcat-scrtext_m = text-004.
    ws_fcat-tabname = 'I_MARC'.
    APPEND ws_fcat TO i_fcat2.
    CLEAR ws_fcat.
    ws_fcat-fieldname = 'MTART'.
    ws_fcat-scrtext_m = text-002.
    ws_fcat-tabname = 'I_MARC'.
    APPEND ws_fcat TO i_fcat2.
    CLEAR ws_fcat.
    ws_fcat-fieldname = 'MAKTX'.
    ws_fcat-scrtext_m = text-003.
    ws_fcat-tabname = 'I_MARC'.
    APPEND ws_fcat TO i_fcat2.
    CLEAR ws_fcat.
    ENDFORM. " build_fcat_plant
    \*& Form disp_alv_plant
    \* text
    \* \--> p1 text
    \* <-\- p2 text
    FORM disp_alv_plant.
    IF lp_cont2 IS INITIAL.
    \* Create the Container Object of Material Plant data.
    CREATE OBJECT lp_cont2
    EXPORTING
    container_name = c_cont2
    EXCEPTIONS
    cntl_error = 1
    cntl_system_error = 2
    create_error = 3
    lifetime_error = 4
    lifetime_dynpro_dynpro_link = 5
    others = 6.
    IF sy-subrc NE 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ELSE.
    \* Create the Object for Grid of Material Plant data.
    CREATE OBJECT lp_grid2
    EXPORTING
    i_parent = lp_cont2
    EXCEPTIONS
    error_cntl_create = 1
    error_cntl_init = 2
    error_cntl_link = 3
    error_dp_create = 4
    others = 5.
    IF sy-subrc NE 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ELSE.
    \* Dipslay Material Plant data by calling method.
    CALL METHOD lp_grid2->set_table_for_first_display
    CHANGING
    it_outtab = i_marc
    it_fieldcatalog = i_fcat2
    EXCEPTIONS
    invalid_parameter_combination = 1
    program_error = 2
    too_many_lines = 3
    OTHERS = 4.
    IF sy-subrc NE 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    ENDIF.
    ENDIF.
    ELSE.
    \* Call method 'REFRESH_TABLE_DISPLAY' to refresh the grid data.
    CALL METHOD lp_grid2->refresh_table_display.
    ENDIF.
    ENDFORM. " disp_alv_plant

  • How to open a MD form in insert mode when calling from URL ?

    I have a MD form and I want to open it in 'insert' mode when I click on the URL.
    How can I do that ?
    thanks,
    Mainak

    I think somebody has asked the same questions earlier but I cannot find the link to that message. Please can anyone help me ?
    How to open a form in Insert mode from url link ?
    Mainak

  • Call Transaction "MIGO" in display mode only

    Hi friends,
    I have changed the standard the SAP standard program MB51 to a Customer Program 'ZMB51' based upon the user requirement.Iam able to get all the values (output)
    Now my requirement is .... iam trying to call transaction "MIGO" when the user clicks on the Material Document Number (MBLNR) (as how in Standard program)
    I ve used "ALV_GRID..." display. and given a callback_user_command also .... iam able to call the trasaction ...... but it is editable and not in the display mode ..........
    Here my code :
    FORM SY_UCOMM_FOR_MBLNR USING R_UCOMM LIKE SY-UCOMM RS_SELFIELD TYPE
    SLIS_SELFIELD.
      IF RS_SELFIELD-FIELDNAME EQ 'MBLNR'.
      IF NOT RS_SELFIELD-VALUE IS INITIAL  AND
             RS_SELFIELD-VALUE NE SY-ULINE.
          CALL TRANSACTION 'MIGO'.
        ENDIF.
        IF R_UCOMM EQ SPACE.
        ENDIF.
      ENDIF.
    ENDFORM.                    " SY_UCOMM_FOR_MBLNR
    So ??????????????????
    What is the remedy ????
    Expecting ur answers....
    Thanks in Advance
    Cheers,
    R.Kripa.

    Hi ... it is solved ...
    I ve changed the code as how it was in MB51 report.
    Here is my code
    FORM SY_UCOMM_FOR_MBLNR USING R_UCOMM LIKE SY-UCOMM RS_SELFIELD TYPE
    SLIS_SELFIELD.
      CASE RS_SELFIELD-TABNAME.
        WHEN 'I_FINAL'.
          READ TABLE I_FINAL INDEX RS_SELFIELD-TABINDEX.
      ENDCASE.
      CHECK SY-SUBRC = 0 .
      IF R_UCOMM = '&IC1'.
        CHECK RS_SELFIELD-TABNAME = 'I_FINAL'.
        CASE RS_SELFIELD-FIELDNAME.
          WHEN 'MBLNR'.
            SET PARAMETER ID 'MBN' FIELD I_FINAL-MBLNR.
            SET PARAMETER ID 'POS' FIELD I_FINAL-ZEILE.
            SET PARAMETER ID 'MJA' FIELD I_FINAL-MJAHR.
        ENDCASE.
        IF SY-SUBRC = 0.
          SELECT SINGLE * FROM MKPF
                    WHERE  MBLNR = I_FINAL-MBLNR
                      AND  MJAHR = I_FINAL-MJAHR.
          IF SY-SUBRC = 0.
    MIGO_DIALOG is a funcion module to set the MIGO transaction
    in Display mode.
            CALL FUNCTION 'MIGO_DIALOG'
              EXPORTING
                I_ACTION            = 'A04'
                I_REFDOC            = 'R02'
                I_NOTREE            = 'X'
                I_NO_AUTH_CHECK     = ' '
                I_DEADEND           = 'X'
                I_SKIP_FIRST_SCREEN = 'X'
                I_OKCODE            = 'OK_GO'
                I_MBLNR             = I_FINAL-MBLNR
                I_MJAHR             = I_FINAL-MJAHR
                I_ZEILE             = I_FINAL-ZEILE.
          ENDIF.
        ENDIF.
      ENDIF.
    But still if anyone knows how to call MIGo transaction i Display mode using 'CALL TRANSACTION 'MIGO''.
    Thanks friends,
    Cheers
    R.Krpia.

  • Decline calls in lock mode is not appearing on screen to call back the same numbers.

    Hi,
    After updating IOS 7 on my iphone  4.
    Decline calls in lock mode is not appearing on screen to call back the same numbers.(Ex.. Phone is in lock mode when  calls comes  we will  decline the same by double click the power button, But same call number R contact is not appearing in screen to call back them, & Aslo now it is very very slow.. Kindly Help the same.. )

    So then this means your Energy Saver preferences are corrupted somewhere. I would at least backup your data in case something else gets corrupted by a damaged directory, or the hard drive is beginning to show signs of its dying, or you find you might later need to repair your directory. Regardless, I wouldn't update your software until you find out why your Energy Saver doesn't work properly with the only third party item being a display.

  • Speaker mode is full of static during calls

    My iphone 6 iOS8.0.3 has speaker phone problems. When the phone is in speaker mode and this is only during phone calls, the sound is full of static. This also occurs when my phone is in bluetooth mode during calls. I can play music just fine. Weird.

    I went to the Apple Store and they reset the firmware and restored the phone as well.  I am still having the issues. They said the phone was fine and to keep using it for a week.  If there were still issues then to come back and they would run another test to see if the phone was picking up any issues with the reception.  The guy that helped me said that his phone sometimes has an echo for a couple of days and then it goes away.  I am wondering if it is a problem with Rogers.  I am interested to see that you are having similar issues. The static when it comes is a little annoying. It must be a software issue.

  • No Missed Calls AirPlane Mode Bug

    When I put my iPhone in AirPlane I don't recive calls or iMessages. (Normal)
    When I disable AirPlane mode, any calls that I recived while AirPlane mode was on don't appear at all. So it shows no missed calls, but Messages do show up. I have tested this with several diffrent Phones & I just wan't to know if this is normal or is there something wrong?
    Any help is much appreciated. Thanks

    I think you have some confusion. What you are asking is not supported.
    There is (1) "phone" based missed call notification and (2) "network" supported missed call notification.
    (1) - the normal usage where if you phone is ON and has a signal, you get a call but you dont answer, it shows up in the missed call list.
    now if your phone is off or with no signal, you will not get any missed calls since the phone never received the calls in the first place.
    (2) - this is offered only by some carriers in some parts of the world where even if your phone is off, if someone calls you, the network send a missed call notification once you reconnect to the network (like SMS)
    so your phone's behaviour is normal.

  • BB Tour: Emergency Call Mode Only

    This morning I accidentally selected the the option to make an emergency call rather than unlocking my phone via password.  I immediately terminated the call, but have been unable to make/receive calls, browse the web, send text  or email etc.  I tried powering the phone on and off, removing the battery, and turning my network connections on and off (tried all several times) and nothing has worked.  My phone has been like this for 6 hours now.  A review of the BB guide stated the emergency call mode would disable once I made an outbound non emergency call, but his obviously didn't work.  The other portion of the guide said the phone normally resets after a few minutes.  Any ideas?

    Here is some additional information if you are still unable to use your device.
    If your BlackBerry® device is connected to a CDMA network, when you end an emergency call, your device enters Emergency Callback Mode.
    This mode enables the operator to call you back or determine your approximate location. Emergency
    Callback Mode is active for five minutes or is canceled when you make a non-emergency call.
    ***Since you have already tried to make a non-emergency call, and it is still not disabling the emergency mode, try calling your voicemail box (*86 send) and go as far as checking your messages. This should disable the Emergency Callback Mode.
    I hope this information helps.

  • Dial-Peer matches but fails to call out

    Hello,
    Am trying to get my CME configured for Callcentric.  I have both an inbound and an outbound plan.
    With my dial-peers configured for standard 11-digit and 10-digit dialing, calls go to fast busy after all digits except the last two are dialed.  Debug shows a dial-peer match initially, then states no match and the call fails.  If I change the destination pattern to match my cell phone number exactly, I can dial all the digits but the call still fails.  Anyone have a suggestion?
    Here are my dial peers:
    dial-peer voice 700 voip
    description SIP Trunk - Incoming
    voice-class sip dtmf-relay force rtp-nte
    session protocol sipv2
    session target dns:callcentric.com
    incoming called-number .%
    dial-peer voice 701 voip
    description SIP Trunk - Outgoing 3-Digit Calls
    translation-profile outgoing SIP_1
    preference 1
    destination-pattern 9[2-8]11
    voice-class codec 1
    voice-class sip dtmf-relay force rtp-nte
    session protocol sipv2
    session target sip-server
    dtmf-relay rtp-nte
    dial-peer voice 702 voip
    description SIP Trunk - Outgoing 11-Digit Calls
    translation-profile outgoing SIP_1
    preference 1
    destination-pattern 91[2-9].......
    voice-class sip dtmf-relay force rtp-nte
    session protocol sipv2
    session target sip-server
    dtmf-relay rtp-nte
    dial-peer voice 703 voip
    description SIP Trunk - Outgoing 10-Digit Calls
    translation-profile outgoing SIP_1
    preference 1
    destination-pattern 9[2-9].......
    voice-class codec 1
    voice-class sip dtmf-relay force rtp-nte
    session protocol sipv2
    session target sip-server
    no vad
    And here is the debug associated with a call:
    *Dec 26 22:26:27.854: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
       Calling Number=7018, Called Number=, Voice-Interface=0x4A4AE7B0,
       Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,
       Peer Info Type=DIALPEER_INFO_SPEECH
    *Dec 26 22:26:27.854: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
       Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=20009
    GMIT-VOICEROUTER01#
    *Dec 26 22:26:29.526: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=9, Peer Info Type=DIALPEER_INFO_SPEECH
    *Dec 26 22:26:29.526: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=9
    *Dec 26 22:26:29.526: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Result=Partial Matches(1) after DP_MATCH_DEST
    *Dec 26 22:26:29.526: //-1/98A189FD81D3/DPM/dpMatchPeersMoreArg:
       Result=MORE_DIGITS_NEEDED(1)
    *Dec 26 22:26:29.914: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=91, Peer Info Type=DIALPEER_INFO_SPEECH
    *Dec 26 22:26:29.914: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=91
    *Dec 26 22:26:29.914: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Result=Partial Matches(1) after DP_MATCH_DEST
    *Dec 26 22:26:29.914: //-1/98A189FD81D3/DPM/dpMatchPeersMoreArg:
       Result=MORE_DIGITS_NEEDED(1)
    *Dec 26 22:26:30.174: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Calling Numbe
    GMIT-VOICEROUTr=, Called Number=912, Peer Info Type=DIALPEER_INFO_SPEECH
    *Dec 26 22:26:30.174: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=912
    *Dec 26 22:26:30.174: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Result=Partial Matches(1) after DP_MATCH_DEST
    *Dec 26 22:26:30.174: //-1/98A189FD81D3/DPM/dpMatchPeersMoreArg:
       Result=MORE_DIGITS_NEEDED(1)
    *Dec 26 22:26:30.514: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=9120, Peer Info Type=DIALPEER_INFO_SPEECH
    *Dec 26 22:26:30.514: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=9120
    *Dec 26 22:26:30.514: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Result=Partial Matches(1) after DP_MATCH_DEST
    *Dec 26 22:26:30.514: //-1/98A189FD81D3/DPM/dpMatchPeersMoreArg:
       Result=MORE_DIGITS_NEEDED(1)
    *Dec 26 22:26:30.822: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=91207, Peer Info Type=DIALPEER_INFO_SPEECH
    *Dec 26 22:26:30.822: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=91207
    *Dec 26 22:26:30.826: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Result=Partial Matches(1) after DP_MATCH_DEST
    *Dec 26 22:26:30.826: //-1/98A189FD81D3/DPM/dpMatchPeersMoreArg:
       Result=MORE_DIGITS_NEEDED(1)
    *Dec 26 22:26:31.342: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=912072, Peer Info Type=DIALPEER_INFO_SPEECH
    *Dec 26 22:26:31.342: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=912072
    *Dec 26 22:26:31.346: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Result=Partial Matches(1) after DP_MATCH_DEST
    *Dec 26 22:26:31.346: //-1/98A189FD81D3/DPM/dpMatchPeersMoreArg:
       Result=MORE_DIGITS_NEEDED(1)
    *Dec 26 22:26:31.542: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=9120722, Peer Info Type=DIALPEER_INFO_SPEECH
    *Dec 26 22:26:31.546: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=9120722
    *Dec 26 22:26:31.546: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Result=Partial Matches(1) after DP_MATCH_DEST
    *Dec 26 22:26:31.546: //-1/98A189FD81D3/DPM/dpMatchPeersMoreArg:
       Result=MORE_DIGITS_NEEDED(1)
    *Dec 26 22:26:31.934: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=91207227, Peer Info Type=DIALPEER_INFO_SPEECH
    *Dec 26 22:26:31.934: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=91207227
    *Dec 26 22:26:31.934: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Result=Partial Matches(1) after DP_MATCH_DEST
    *Dec 26 22:26:31.934: //-1/98A189FD81D3/DPM/dpMatchPeersMoreArg:
       Result=MORE_DIGITS_NEEDED(1)
    *Dec 26 22:26:32.602: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=912072277, Peer Info Type=DIALPEER_INFO_SPEECH
    *Dec 26 22:26:32.602: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=912072277
    *Dec 26 22:26:32.602: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Result=Partial Matches(1) after DP_MATCH_DEST
    *Dec 26 22:26:32.606: //-1/98A189FD81D3/DPM/dpMatchPeersMoreArg:
       Result=MORE_DIGITS_NEEDED(1)
    *Dec 26 22:26:33.382: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=9120722776, Peer Info Type=DIALPEER_INFO_SPEECH
    *Dec 26 22:26:33.382: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=9120722776
    *Dec 26 22:26:33.382: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Result=Success(0) after DP_MATCH_DEST
    *Dec 26 22:26:33.386: //-1/98A189FD81D3/DPM/dpMatchPeersMoreArg:
       Result=SUCCESS(0)
       List of Matched Outgoing Dial-peer(s):
         1: Dial-peer Tag=702
    *Dec 26 22:26:33.386: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=9120722776, Peer Info Type=DIALPEER_INFO_SPEECH
    *Dec 26 22:26:33.386: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=9120722776
    *Dec 26 22:26:33.386: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Result=Success(0) after DP_MATCH_DEST
    *Dec 26 22:26:33.386: //-1/98A189FD81D3/DPM/dpMatchPeersMoreArg:
       Result=SUCCESS(0)
       List of Matched Outgoing Dial-peer(s):
         1: Dial-peer Tag=702
    *Dec 26 22:26:33.386: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=9120722776, Peer Info Type=DIALPEER_INFO_SPEECH
    *Dec 26 22:26:33.386: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=9120722776
    *Dec 26 22:26:33.386: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Result=Success(0) after DP_MATCH_DEST
    *Dec 26 22:26:33.386: //-1/98A189FD81D3/DPM/dpMatchPeersMoreArg:
       Result=SUCCESS(0)
       List of Matched Outgoing Dial-peer(s):
         1: Dial-peer Tag=702
    *Dec 26 22:26:33.390: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
       Calling Number=9120722776, Called Number=9120722776, Peer Info Type=DIALPEER_INFO_SPEECH
    *Dec 26 22:26:33.390: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=9120722776
    *Dec 26 22:26:33.390: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
       Result=Success(0) after DP_MATCH_DEST
    *Dec 26 22:26:33.390: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:
       Result=SUCCESS(0)
       List of Matched Outgoing Dial-peer(s):
         1: Dial-peer Tag=702
    *Dec 26 22:26:33.390: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
       Calling Number=, Called Number=, Voice-Interface=0x0,
       Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
       Peer Info Type=DIALPEER_INFO_SPEECH
    *Dec 26 22:26:33.390: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
       Result=NO_MATCH(-1) After All Match Rules Attempt
    *Dec 26 22:26:33.390: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
       Calling Number=9120722776, Called Number=, Voice-Interface=0x0,
       Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
       Peer Info Type=DIALPEER_INFO_SPEECH
    *Dec 26 22:26:33.390: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
       Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=702
    *Dec 26 22:26:33.390: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=9120722776, Peer Info Type=DIALPEER_INFO_SPEECH
    *Dec 26 22:26:33.390: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=9120722776
    *Dec 26 22:26:33.390: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
       Result=Success(0) after DP_MATCH_DEST
    *Dec 26 22:26:33.390: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:
       Result=SUCCESS(0)
       List of Matched Outgoing Dial-peer(s):
         1: Dial-peer Tag=702
    *Dec 26 22:26:33.394: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=9120722776, Peer Info Type=DIALPEER_INFO_SPEECH
    *Dec 26 22:26:33.394: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=9120722776
    *Dec 26 22:26:33.394: //-1/98A189FD81D3/DPM/dpMatchPeersCore:
       Result=Success(0) after DP_MATCH_DEST
    *Dec 26 22:26:33.394: //-1/98A189FD81D3/DPM/dpMatchPeersMoreArg:
       Result=SUCCESS(0)
       List of Matched Outgoing Dial-peer(s):
         1: Dial-peer Tag=702
    *Dec 26 22:26:33.574: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
       Calling Number=91[2-9]......., Called Number=, Voice-Interface=0x0,
       Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
       Peer Info Type=DIALPEER_INFO_SPEECH
    *Dec 26 22:26:33.578: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
       Result=NO_MATCH(-1) After All Match Rules Attempt
    *Dec 26 22:26:36.374: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
       Calling Number=7018$, Called Number=, Voice-Interface=0x0,
       Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
       Peer Info Type=DIALPEER_INFO_SPEECH
    *Dec 26 22:26:36.378: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
       Result=NO_MATCH(-1) After All Match Rules AttemptER01#

    Translation profile:
    voice translation-rule 3
    rule 1 /^7../ /2072267262/
    voice translation-rule 4
    rule 1 /^9\(1....\)/ /\1/
    rule 2 /^9207\(...\)/ /\1/
    rule 3 /^9\(011.*\)/ /\1/
    rule 4 /^9\([2-9]11\)/ /\1/
    voice translation-profile SIP_1
    translate calling 3
    translate called 4
    Here is debug ccsip messages:
    *Dec 27 14:10:16.598: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Received:
    OPTIONS sip:[email protected]:5060;transport=udp SIP/2.0
    Via: SIP/2.0/UDP 207.5.178.214:5060;branch=z9hG4bKd77b793048igqgkfd0g1.1
    Allow-Events: message-summary, refer, dialog, line-seize, presence, call-info, as-feature-event
    Max-Forwards: 69
    Call-ID: SDp6vve01-196593d11e4bf68c71f8a4085d7de7d0-c54gcb0
    From: ;tag=SDp6vve01-callagent.gwi.net+1+8bfe3a+d3cf6d84
    CSeq: 938331054 OPTIONS
    Organization: MetaSwitch
    Supported: resource-priority, 100rel
    Content-Length: 0
    Contact:
    To:
    *Dec 27 14:10:16.606: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Sent:
    SIP/2.0 200 OK
    Via: SIP/2.0/UDP 207.5.178.214:5060;branch=z9hG4bKd77b793048igqgkfd0g1.1
    From: ;tag=SDp6vve01-callagent.gwi.net+1+8bfe3a+d3cf6d84
    To:
    GMIT-VOICEROUT166>;tag=F1B5120-18BD
    Date: Fri, 27 Dec 2013 14:10:16 GMT
    Call-ID: SDp6vve01-196593d11e4bf68c71f8a4085d7de7d0-c54gcb0
    Server: Cisco-SIPGateway/IOS-12.x
    CSeq: 938331054 OPTIONS
    Supported: 100rel,resource-priority,replaces,sdp-anat
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
    Allow-Events: telephone-event
    Accept: application/sdp
    Content-Type: application/sdp
    Content-Length: 172
    v=0
    o=CiscoSystemsSIP-GW-UserAgent 4484 7548 IN IP4 66.55.220.166
    s=SIP Call
    c=IN IP4 66.55.220.166
    t=0 0
    m=audio 0 RTP/AVP 18 0 8 9 4 2 15 3
    c=IN IP4 66.55.220.166
    ER01#
    GMIT-VOICEROUTER01#
    *Dec 27 14:10:34.834: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Sent:
    INVITE sip:[email protected]:5080 SIP/2.0
    Via: SIP/2.0/UDP 66.55.220.166:5060;branch=z9hG4bK5795232C
    From: "Server Room" [email protected]>;tag=F1B9854-8A5
    To: [email protected]>
    Date: Fri, 27 Dec 2013 14:10:34 GMT
    Call-ID: [email protected]
    Supported: 100rel,timer,resource-priority,replaces,sdp-anat
    Min-SE:  1800
    Cisco-Guid: 2066961728-1849102819-2185007278-567139419
    User-Agent: Cisco-SIPGateway/IOS-12.x
    Allow: INVITE, OPTIONS, B
    GMIT-VOICEROUTER01#YE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
    CSeq: 101 INVITE
    Max-Forwards: 70
    Timestamp: 1388153434
    Contact:
    Expires: 180
    Allow-Events: telephone-event
    Content-Type: application/sdp
    Content-Disposition: session;handling=required
    Content-Length: 297
    v=0
    o=CiscoSystemsSIP-GW-UserAgent 3022 9963 IN IP4 66.55.220.166
    s=SIP Call
    c=IN IP4 66.55.220.166
    t=0 0
    m=audio 19258 RTP/AVP 18 101 19
    c=IN IP4 66.55.220.166
    a=rtpmap:18 G729/8000
    a=fmtp:18 annexb=no
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-16
    a=rtpmap:19 CN/8000
    a=ptime:20
    *Dec 27 14:10:34.906: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Received:
    SIP/2.0 407 Proxy Authentication Required
    v: SIP/2.0/UDP 66.55.220.166:5060;branch=z9hG4bK5795232C
    f: "Server Room" [email protected]>;tag=F1B9854-8A5
    t: [email protected]>
    i: [email protected]
    CSeq: 1
    GMIT-VOICEROUT01 INVITE
    Proxy-Authenticate: Digest realm="callcentric.com", domain="sip:callcentric.com", nonce="3755ae79fd668c2035ebb90cdc12d030", opaque="", stale=TRUE, algorithm=MD5
    l: 0
    *Dec 27 14:10:34.914: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Sent:
    ACK sip:[email protected]:5080 SIP/2.0
    Via: SIP/2.0/UDP 66.55.220.166:5060;branch=z9hG4bK5795232C
    From: "Server Room" [email protected]>;tag=F1B9854-8A5
    To: [email protected]>
    Date: Fri, 27 Dec 2013 14:10:34 GMT
    Call-ID: [email protected]
    Max-Forwards: 70
    CSeq: 101 ACK
    Allow-Events: telephone-event
    Content-Length: 0
    *Dec 27 14:10:34.914: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Sent:
    INVITE sip:[email protected]:5080 SIP/2.0
    Via: SIP/2.0/UDP 66.55.220.166:5060;branch=z9hG4bK579619F9
    From: "Server Room" [email protected]>;tag=F1B9854-8A5
    To: [email protected]>
    Date: Fri, 27 Dec 2013 14:10:34 GMT
    Call-ID: [email protected]
    Supported: 100rel,timer,resource-priority,replaces,sdp-anat
    Min-SE:  1800
    Cisco-Guid: 2066961728-1849102819-2185007278-567139419
    User-Agent: Cisco-SIPGateway/IOS-12.x
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
    CSeq: 102 INVITE
    Max-Forwards: 70
    Timestamp: 1388153434
    Contact:
    Expires: 180
    Allow-Events: telephone-event
    Proxy-Authorization: Digest username="17772882353",realm="callcentric.com",uri="sip:[email protected]:5080",response="cbac03a76a23b6a35ebbee966c00a577",nonce="3755ae79fd668c2035ebb90cdc12d030",opaque="",algorithm=MD5
    Content-Type: application/sdp
    Content-Disposition: session;handling=required
    Content-Length: 297
    v=0
    o=CiscoSystemsSIP-GW-UserAgent 3022 9963 IN IP4 66.55.220.166
    s=SIP Call
    c=IN IP4 66.55.220.166
    t=0 0
    m=audio 19258 RTP/AVP 18 101 19
    c=IN IP4 66.55.220.166
    a=rtpmap:18 G729/8000
    a=fmtp:18 annexb=no
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-16
    a=rtpmap:19 CN/8000
    a=ptime:20
    *Dec 27 14:10:34.990: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Received:
    SIP/2.0 403 Incorrect Authentication
    v: SIP/2.0/UDP 66.55.220.166:5060;branch=z9hG4bK579619F9
    f: "Server Room" [email protected]>;tag=F1B9854-8A5
    t: [email protected]>
    i: [email protected]
    CSeq: 102 INVITE
    l: 0
    *Dec 27 14:10:35.002: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Sent:
    ACK sip:[email protected]:5080 SIP/2.0
    Via: SIP/2.0/UDP 66.55.220.166:5060;branch=z9hG4bK579619F9
    From: "Server Room" [email protected]>;tag=F1B9854-8A5
    To: [email protected]>
    Date: Fri, 27 Dec 2013 14:10:34 GMT
    Call-ID: [email protected]
    Max-Forwards: 70
    CSeq: 102 ACK
    Allow-Events: telephone-event
    Content-Length: 0
    Here is debug voip ccapi inout:
    GMIT-VOICEROUTER01#debug voip ccapi inout
    voip ccapi inout debugging is on
    GMIT-VOICEROUTER01#
    *Dec 27 14:10:55.326: //-1/8912F77B8243/CCAPI/cc_api_display_ie_subfields:
       cc_api_call_setup_ind_common:
       cisco-username=
       ----- ccCallInfo IE subfields -----
       cisco-ani=7018
       cisco-anitype=0
       cisco-aniplan=0
       cisco-anipi=0
       cisco-anisi=0
       dest=
       cisco-desttype=0
       cisco-destplan=0
       cisco-rdie=FFFFFFFF
       cisco-rdn=
       cisco-lastrdn=
       cisco-rdntype=0
       cisco-rdnplan=0
       cisco-rdnpi=0
       cisco-rdnsi=0
       cisco-redirectreason=0   fwd_final_type =0
       final_redirectNumber =
       hunt_group_timeout =0
    *Dec 27 14:10:55.326: //-1/8912F77B8243/CCAPI/cc_api_call_setup_ind_common:
       Interface=0x4A4AE7B0, Call Info(
       Calling Number=7018,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
       Called Number=(TON=Unknown, NPI=Unknown),
       Calling Translated=FALSE, Subscriber Type Str=RegularLine, FinalDestinationFlag=FALSE,
       Incoming Dial-peer=20009, Progress Indication=ORIGINATING SIDE IS NON ISDN(3)
    GMIT-VOICEROUT, Calling IE Present=TRUE,
       Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID Transparent=FALSE), Call Id=-1
    *Dec 27 14:10:55.326: //-1/8912F77B8243/CCAPI/ccCheckClipClir:
       In: Calling Number=7018(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed)
    *Dec 27 14:10:55.326: //-1/8912F77B8243/CCAPI/ccCheckClipClir:
       Out: Calling Number=7018(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed)
    *Dec 27 14:10:55.326: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    *Dec 27 14:10:55.326: :cc_get_feature_vsa malloc success
    *Dec 27 14:10:55.326: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    *Dec 27 14:10:55.326:  cc_get_feature_vsa count is 1
    *Dec 27 14:10:55.326: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    *Dec 27 14:10:55.326: :FEATURE_VSA attributes are: feature_name:0,feature_time:1282234808,feature_id:151
    *Dec 27 14:10:55.330: //12898/8912F77B8243/CCAPI/cc_api_call_setup_ind_common:
       Set Up Event Sent;
       Call Info(Calling Number=7018(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
       Called Number=(TON=Unknown, NPI=Unknown))
    *Dec 27 14:10:55.330: //12898/8912F77B8243/CCAPI/cc_process_call_setup_ind:
       Event=0x49A103B8
    *Dec 27 14:10:55.330: //12898/8912F77B8243/CCAPI/ccCallSetContext:
       Context=0x4C5A319C
    *Dec 27 14:10:55.334: //12898/8912F77B8243/CCAPI/cc_process_call_setup_ind:
       >>>>CCAPI handed cid 12898 with tag 20009 to app "_ManagedAppProcess_Default"
    *Dec 27 14:10:55.334: //12898/8912F77B8243/CCAPI/ccCallSetupAck:
       Call Id=12898
    *Dec 27 14:10:55.334: //12898/8912F77B8243/CCAPI/cc_api_set_transfer_info:
       Transfer Number=, Transfer Reason=0x0
    *Dec 27 14:10:55.334: //12898/8912F77B8243/CCAPI/ccGenerateToneInfo:
       Stop Tone On Digit=TRUE, Tone=Dial Tone,
       Tone Direction=Network, Params=0x0, Call Id=12898
    *Dec 27 14:10:55.334: //12898/8912F77B8243/CCAPI/ccSetDigitTimeouts:
       Initial Digit Timeout=-1000(ms), Inter Digit Timeout=-1000(ms)
    *Dec 27 14:10:55.338: //12898/8912F77B8243/CCAPI/ccSetDigitTimeouts:
       Call Entry(Inter Digit Timeout=10000(ms), Initial Digit Timeout=10000(ms))
    *Dec 27 14:10:55.338: //12898/xxxxxxxxxxxx/CCAPI/ccCallReportDigits:
       (callID=0x3262, digit_event=0x1, enable=TRUE, consume=FALSE)
    *Dec 27 14:10:55.338: //12898/8912F77B8243/CCAPI/ccCallReportDigits:
       Enabled=TRUE, Call Id=12898
    *Dec 27 14:10:55.338: //12898/xxxxxxxxxxxx/CCAPI/cc_api_call_report_digits_done:
       (vdbPtr=0x4A4AE7B0, callID=0x3262, disp=0, digit_event=0x1, enable=TRUE, consume=FALSE)
    *Dec 27 14:10:55.338: //12898/8912F77B8243/CCAPI/cc_api_call_report_digits_done:
       Enabled=TRUE, Disposition=0x0, Interface=0x4A4AE7B0, Call Id=12898
    *Dec 27 14:10:55.338: //12898/8912F77B8243/CCAPI/cc_api_call_report_digits_done:
       Call Entry(Initial Digit Timeout=15000(ms), Inter Digit Timeout=10000(ms))
    *Dec 27 14:10:56.650: //12898/8912F77B8243/CCAPI/cc_api_call_digit_begin:
       Destination Interface=0x0, Destination Mask=0x3, Destination Call Id=-1,
       Source Call Id=12898, Digit=9, DigitBeginFlags=0x0,
       Rtp Timestamp=0x9D41D0, Rtp Expiration=0x0
    *Dec 27 14:10:56.654: //12898/8912F77B8243/CCAPI/cc_api_call_digit_end:
       Destination Interface=0x0, Destination Mask=0x3, Destination Call Id=-1,
       Source Call Id=12898, Digit=9, Duration=100,
       Xrule Calling Tag=0, Xrule Called Tag=0, Digit Tone Mode=DTMF
    *Dec 27 14:10:56.654: //12898/8912F77B8243/CCAPI/cc_api_call_digit_end:
       Call Entry(Handoff Depth=0)
    *Dec 27 14:10:56.970: //12898/8912F77B8243/CCAPI/cc_api_call_digit_begin:
       Destination Interface=0x0, Destination Mask=0x3, Destination Call Id=-1,
       Source Call Id=12898, Digit=1, DigitBeginFlags=0x0,
       Rtp Timestamp=0x9DBED0, Rtp Expiration=0x0
    *Dec 27 14:10:56.974: //12898/8912F77B8243/CCAPI/cc_api_call_digit_end:
       Destination Interface=0x0, Destination Mask=0x3, Destination Call Id=-1,
       Source Call Id=12898, Digit=1, Duration=100,
       Xrule Calling Tag=0, Xrule Called Tag=0, Digit Tone Mode=DTMF
    *Dec 27 14:10:56.974: //12898/8912F77B8243/CCAPI/cc_api_call_digit_end:
       Call Entry(Handoff Depth=0)
    *Dec 27 14:10:57.290: //12898/8912F77B8243/CCAPI/cc_api_call_digit_begin:
       Destination Interface=0x0, Destination Mask=0x3, Destination Call Id=-1,
       Source Call Id=12898, Digit=2, DigitBeginFlags=0x0,
       Rtp Timestamp=0x9E3BD0, Rtp Expiration=0x0
    *Dec 27 14:10:57.294: //12898/8912F77B8243/CCAPI/cc_api_call_digit_end:
       Destination Interface=0x0, Destination Mask=0x3, Destination Call Id=-1,
       Source Call Id=12898, Digit=2, Duration=100,
       Xrule Calling Tag=0, Xrule Called Tag=0, Digit Tone Mode=DTMF
    *Dec 27 14:10:57.294: //12898/8912F77B8243/CCAPI/cc_api_call_digit_end:
       Call Entry(Handoff Depth=0)
    *Dec 27 14:10:57.610: //12898/8912F77B8243/CCAPI/cc_api_call_digit_begin:
       Destination Interface=0x0, Destination Mask=0x3, Destination Call Id=-1,
       Source Call Id=12898, Digit=0, DigitBeginFlags=0x0,
       Rtp Timestamp=0x9EB8D0, Rtp Expiration=0x0
    *Dec 27 14:10:57.614: //12898/8912F77B8243/CCAPI/cc_api_call_digit_end:
       Destination Interface=0x0, Destination Mask=0x3, Destination Call Id=-1,
       Source Call Id=12898, Digit=0, Duration=100,
       Xrule Calling Tag=0, Xrule Called Tag=0, Digit Tone Mode=DTMF
    *Dec 27 14:10:57.614: //12898/8912F77B8243/CCAPI/cc_api_call_digit_end:
       Call Entry(Handoff Depth=0)
    *Dec 27 14:10:57.890: //12898/8912F77B8243/CCAPI/cc_api_call_digit_begin:
       Destination Interface=0x0, Destination Mask=0x3, Destination Call Id=-1,
       Source Call Id=12898, Digit=7, DigitBeginFlags=0x0,
       Rtp Timestamp=0x9F35D0, Rtp Expiration=0x0
    *Dec 27 14:10:57.894: //12898/8912F77B8243/CCAPI/cc_api_call_digit_end:
       Destination Interface=0x0, Destination Mask=0x3, Destination Call Id=-1,
       Source Call Id=12898, Digit=7, Duration=100,
       Xrule Calling Tag=0, Xrule Called Tag=0, Digit Tone Mode=DTMF
    *Dec 27 14:10:57.894: //12898/8912F77B8243/CCAPI/cc_api_call_digit_end:
       Call Entry(Handoff Depth=0)
    *Dec 27 14:10:58.162: //12898/8912F77B8243/CCAPI/cc_api_call_digit_begin:
       Destination Interface=0x0, Destination Mask=0x3, Destination Call Id=-1,
       Source Call Id=12898, Digit=2, DigitBeginFlags=0x0,
       Rtp Timestamp=0x9FB2D0, Rtp Expiration=0x0
    *Dec 27 14:10:58.162: //12898/8912F77B8243/CCAPI/cc_api_call_digit_end:
       Destination Interface=0x0, Destination Mask=0x3, Destination Call Id=-1,
       Source Call Id=12898, Digit=2, Duration=100,
       Xrule Calling Tag=0, Xrule Called Tag=0, Digit Tone Mode=DTMF
    *Dec 27 14:10:58.162: //12898/8912F77B8243/CCAPI/cc_api_call_digit_end:
       Call Entry(Handoff Depth=0)
    *Dec 27 14:10:58.314: //12898/8912F77B8243/CCAPI/cc_api_call_digit_begin:
       Destination Interface=0x0, Destination Mask=0x3, Destination Call Id=-1,
       Source Call Id=12898, Digit=2, DigitBeginFlags=0x0,
       Rtp Timestamp=0xA02FD0, Rtp Expiration=0x0
    *Dec 27 14:10:58.314: //12898/8912F77B8243/CCAPI/cc_api_call_digit_end:
       Destination Interface=0x0, Destination Mask=0x3, Destination Call Id=-1,
       Source Call Id=12898, Digit=2, Duration=100,
       Xrule Calling Tag=0, Xrule Called Tag=0, Digit Tone Mode=DTMF
    *Dec 27 14:10:58.314: //12898/8912F77B8243/CCAPI/cc_api_call_digit_end:
       Call Entry(Handoff Depth=0)
    *Dec 27 14:10:58.582: //12898/8912F77B8243/CCAPI/cc_api_call_digit_begin:
       Destination Interface=0x0, Destination Mask=0x3, Destination Call Id=-1,
       Source Call Id=12898, Digit=7, DigitBeginFlags=0x0,
       Rtp Timestamp=0xA0ACD0, Rtp Expiration=0x0
    *Dec 27 14:10:58.582: //12898/8912F77B8243/CCAPI/cc_api_call_digit_end:
       Destination Interface=0x0, Destination Mask=0x3, Destination Call Id=-1,
       Source Call Id=12898, Digit=7, Duration=100,
       Xrule Calling Tag=0, Xrule Called Tag=0, Digit Tone Mode=DTMF
    *Dec 27 14:10:58.582: //12898/8912F77B8243/CCAPI/cc_api_call_digit_end:
       Call Entry(Handoff Depth=0)
    *Dec 27 14:10:58.754: //12898/8912F77B8243/CCAPI/cc_api_call_digit_begin:
       Destination Interface=0x0, Destination Mask=0x3, Destination Call Id=-1,
       Source Call Id=12898, Digit=7, DigitBeginFlags=0x0,
       Rtp Timestamp=0xA129D0, Rtp Expiration=0x0
    *Dec 27 14:10:58.754: //12898/8912F77B8243/CCAPI/cc_api_call_digit_end:
       Destination Interface=0x0, Destination Mask=0x3, Destination Call Id=-1,
       Source Call Id=12898, Digit=7, Duration=100,
       Xrule Calling Tag=0, Xrule Called Tag=0, Digit Tone Mode=DTMF
    *Dec 27 14:10:58.754: //12898/8912F77B8243/CCAPI/cc_api_call_digit_end:
       Call Entry(Handoff Depth=0)
    *Dec 27 14:10:59.022: //12898/8912F77B8243/CCAPI/cc_api_call_digit_begin:
       Destination Interface=0x0, Destination Mask=0x3, Destination Call Id=-1,
       Source Call Id=12898, Digit=6, DigitBeginFlags=0x0,
       Rtp Timestamp=0xA1A6D0, Rtp Expiration=0x0
    *Dec 27 14:10:59.022: //12898/8912F77B8243/CCAPI/cc_api_call_digit_end:
       Destination Interface=0x0, Destination Mask=0x3, Destination Call Id=-1,
       Source Call Id=12898, Digit=6, Duration=100,
       Xrule Calling Tag=0, Xrule Called Tag=0, Digit Tone Mode=DTMF
    *Dec 27 14:10:59.022: //12898/8912F77B8243/CCAPI/cc_api_call_digit_end:
       Call Entry(Handoff Depth=0)
    *Dec 27 14:10:59.026: //12898/xxxxxxxxxxxx/CCAPI/ccCallReportDigits:
       (callID=0x3262, digit_event=0x0, enable=FALSE, consume=FALSE)
    *Dec 27 14:10:59.026: //12898/8912F77B8243/CCAPI/ccCallReportDigits:
       Enabled=TRUE, Call Id=12898
    *Dec 27 14:10:59.026: //12898/xxxxxxxxxxxx/CCAPI/cc_api_call_report_digits_done:
       (vdbPtr=0x4A4AE7B0, callID=0x3262, disp=0, digit_event=0x0, enable=FALSE, consume=FALSE)
    *Dec 27 14:10:59.026: //12898/8912F77B8243/CCAPI/cc_api_call_report_digits_done:
       Enabled=TRUE, Disposition=0x0, Interface=0x4A4AE7B0, Call Id=12898
    *Dec 27 14:10:59.026: //12898/8912F77B8243/CCAPI/cc_api_call_report_digits_done:
       Call Entry(Initial Digit Timeout=15000(ms), Inter Digit Timeout=10000(ms))
    *Dec 27 14:10:59.026: //12898/8912F77B8243/CCAPI/ccCallProceeding:
       Progress Indication=NULL(0)
    *Dec 27 14:10:59.030: //12898/8912F77B8243/CCAPI/ccCallSetupRequest:
       Destination=, Calling IE Present=TRUE, Mode=0,
       Outgoing Dial-peer=702, Params=0x4C5A0BDC, Progress Indication=ORIGINATING SIDE IS NON ISDN(3)
    *Dec 27 14:10:59.030: //12898/8912F77B8243/CCAPI/ccCheckClipClir:
       In: Calling Number=20722672628(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed)
    *Dec 27 14:10:59.030: //12898/8912F77B8243/CCAPI/ccCheckClipClir:
       Out: Calling Number=20722672628(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed)
    *Dec 27 14:10:59.030: //12898/8912F77B8243/CCAPI/ccCallSetupRequest:
       Destination Pattern=91[2-9]......., Called Number=120722776, Digit Strip=FALSE
    *Dec 27 14:10:59.030: //12898/8912F77B8243/CCAPI/ccCallSetupRequest:
       Calling Number=20722672628(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
       Called Number=120722776(TON=Unknown, NPI=Unknown),
       Redirect Number=, Display Info=Server Room
       Account Number=, Final Destination Flag=FALSE,
       Guid=8912F77B-6E37-11E3-8243-90AE21CDDC5B, Outgoing Dial-peer=702
    *Dec 27 14:10:59.030: //12898/8912F77B8243/CCAPI/cc_api_display_ie_subfields:
       ccCallSetupRequest:
       cisco-username=
       ----- ccCallInfo IE subfields -----
       cisco-ani=20722672628
       cisco-anitype=0
       cisco-aniplan=0
       cisco-anipi=0
       cisco-anisi=0
       dest=120722776
       cisco-desttype=0
       cisco-destplan=0
       cisco-rdie=FFFFFFFF
       cisco-rdn=
       cisco-lastrdn=
       cisco-rdntype=0
       cisco-rdnplan=0
       cisco-rdnpi=0
       cisco-rdnsi=0
       cisco-redirectreason=0   fwd_final_type =0
       final_redirectNumber =
       hunt_group_timeout =0
    *Dec 27 14:10:59.034: //12898/8912F77B8243/CCAPI/ccIFCallSetupRequestPrivate:
       Interface=0x48C27BD0, Interface Type=3, Destination=, Mode=0x0,
       Call Params(Calling Number=20722672628,(Calling Name=Server Room)(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
       Called Number=120722776(TON=Unknown, NPI=Unknown), Calling Translated=FALSE,
       Subscriber Type Str=RegularLine, FinalDestinationFlag=FALSE, Outgoing Dial-peer=702, Call Count On=FALSE,
       Source Trkgrp Route Label=, Target Trkgrp Route Label=, tg_label_flag=0, Application Call Id=)
    *Dec 27 14:10:59.034: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    *Dec 27 14:10:59.034: :cc_get_feature_vsa malloc success
    *Dec 27 14:10:59.034: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    *Dec 27 14:10:59.034:  cc_get_feature_vsa count is 2
    *Dec 27 14:10:59.034: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    *Dec 27 14:10:59.034: :FEATURE_VSA attributes are: feature_name:0,feature_time:1282234584,feature_id:152
    *Dec 27 14:10:59.034: //12899/8912F77B8243/CCAPI/ccIFCallSetupRequestPrivate:
       SPI Call Setup Request Is Success; Interface Type=3, FlowMode=1
    *Dec 27 14:10:59.034: //12899/8912F77B8243/CCAPI/ccCallSetContext:
       Context=0x4C5A0B8C
    *Dec 27 14:10:59.034: //12898/8912F77B8243/CCAPI/ccSaveDialpeerTag:
       Outgoing Dial-peer=702
    *Dec 27 14:10:59.038: //12899/8912F77B8243/CCAPI/cc_api_call_proceeding:
       Interface=0x48C27BD0, Progress Indication=NULL(0)
    *Dec 27 14:10:59.270: //12899/8912F77B8243/CCAPI/cc_api_call_disconnected:
       Cause Value=57, Interface=0x48C27BD0, Call Id=12899
    *Dec 27 14:10:59.270: //12899/8912F77B8243/CCAPI/cc_api_call_disconnected:
       Call Entry(Responsed=TRUE, Cause Value=57, Retry Count=0)
    *Dec 27 14:10:59.270: //12898/xxxxxxxxxxxx/CCAPI/ccCallReleaseResources:
       release reserved xcoding resource.
    *Dec 27 14:10:59.270: //12899/8912F77B8243/CCAPI/ccCallSetAAA_Accounting:
       Accounting=0, Call Id=12899
    *Dec 27 14:10:59.270: //12899/8912F77B8243/CCAPI/ccCallDisconnect:
       Cause Value=57, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=57)
    *Dec 27 14:10:59.270: //12899/8912F77B8243/CCAPI/ccCallDisconnect:
       Cause Value=57, Call Entry(Responsed=TRUE, Cause Value=57)
    *Dec 27 14:10:59.274: //12899/8912F77B8243/CCAPI/cc_api_call_disconnect_done:
       Disposition=0, Interface=0x48C27BD0, Tag=0x0, Call Id=12899,
       Call Entry(Disconnect Cause=57, Voice Class Cause Code=0, Retry Count=0)
    *Dec 27 14:10:59.274: //12899/8912F77B8243/CCAPI/cc_api_call_disconnect_done:
       Call Disconnect Event Sent
    *Dec 27 14:10:59.274: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
    *Dec 27 14:10:59.274: :cc_free_feature_vsa freeing 4C6D58D0
    *Dec 27 14:10:59.274: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
    *Dec 27 14:10:59.274:  vsacount in free is 1
    *Dec 27 14:10:59.278: //12898/8912F77B8243/CCAPI/ccCallDisconnect:
       Cause Value=57, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)
    *Dec 27 14:10:59.278: //12898/8912F77B8243/CCAPI/ccCallDisconnect:
       Cause Value=57, Call Entry(Responsed=TRUE, Cause Value=57)
    *Dec 27 14:10:59.278: //12898/8912F77B8243/CCAPI/cc_api_get_transfer_info:
       Transfer Number Is Null
    *Dec 27 14:11:02.250: //12898/8912F77B8243/CCAPI/cc_api_call_disconnect_done:
       Disposition=0, Interface=0x4A4AE7B0, Tag=0x0, Call Id=12898,
       Call Entry(Disconnect Cause=57, Voice Class Cause Code=0, Retry Count=0)
    *Dec 27 14:11:02.250: //12898/8912F77B8243/CCAPI/cc_api_call_disconnect_done:
       Call Disconnect Event Sent
    *Dec 27 14:11:02.250: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
    *Dec 27 14:11:02.250: :cc_free_feature_vsa freeing 4C6D59B0
    *Dec 27 14:11:02.250: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
    *Dec 27 14:11:02.250:  vsacount in free is 0ER01#

Maybe you are looking for

  • Control an Integer field Length without using Validation ??

    Hi, I have Couple of fields where I need to configure them as Integers. Now each one has a fixed length that i need to limit to. But when i create a field of type: integer, i cannot select teh length!!! To achive this the idea i have is to write a va

  • Copy Paste Attributes

    First off - I will admit I am a FCP editor who is figuring out Motion in fits and starts. Basically what I am building is a bullet point graphic of 5 list items where it starts with all 5 visible, fully opaque, and after a couple seconds, 4 lines dim

  • Can I adjust color channels individually?

    In photoshop, if I have a photograph and want to select the color green, I get out my magic wand and select the color green. I can control the amount of selection by adjusting the wand settings. Can i do anything like that in FCPro? If I have video f

  • Error: missing } in xml expression. I cant solve this!

    <script type="text/javascript"> var myObject = new ActiveXObject("Scripting.FileSystemObject"); var pasta = "C:\Users\Catatau\Desktop\BROTHER\Medcurso\oukey\"; var folder = myObject.GetFolder(pasta); var jpg = ".jpg" var pdf = ".pdf" var barra = "\";

  • 10G uix cancel process changes

    I have an application that uses bc4j objects from UIX. In my update and create UIX pages I have cancel buttons, which just trigger the cancel event, like so: <button text="Cancel" ctrl:event="cancel" /> The cancel event does two things: 1. executes a