Fn shortcuts and blue thinkvantage button not working

The Fn+F2, Fn+F5, and Fn+F8 shortcuts are not working on my computer, yet the Fn+F3 and Fn+F4 shortcuts are working. The other ones used work as well but now aren't and I'm not sure why. They blue Thinkvantage button up by the volume also used to work and is no longer working as well. Any ideas as to how I get them to work again?

I thought this was the one place I could rely on for answers, but I guess not. I have given up hope.
T400
Intel® Core™2 Duo T9400 2.53 GHz__Windows 7 Professional__3GB Memory__160GB, 7200RPM Hard Drive__14.1” WXGA+TFT-CFL__ATI Mobility Radeon™ HD 3470--

Similar Messages

HT4623 Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update?

Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update? I go to install an app. I hit install and nothing happens. About a minute later it asks me for my password and then it does nothing. The install button goes back to saying install. However the app shows up in my installed list and in cloud but no app installed.

OK - I found a helpful post - closed app store app and under Settings/General/Date and Time I reset the date and time by switching off "Set Automatically" and then switching it on again. Went back to App Store, launched it and Updatesseems to be working again.
Go figure? Logical, No!

Myi iphone4 microphone not working and the home button not work after IOS6 updat

Myi iphone4 microphone not working and the home button not work after IOS6 updat

Did you try another restore and this time not to restore from a backup and see if that makes a difference? This is what Apple would tell you to do next based on my iphone 5 fiasco.
Make sure all your data is available on your computer for manual syncing later.
Since you did the hard reset I assume that means your home button isn't broken only that it got frozen before. Were you able to get the Apple logo after the reset? Did it boot?
And you are using iTunes 10.7?
I'm just trying to help get you going.

★URGENT★ BLACKBERRY TORCH KEYBOARD TRACKPAD AND ALL OTHER BUTTONS NOT WORKING 9810

MY BLACKBERRY TORCH 9810 KEYBOARD AND CALL,ETC BUTTONS STOPPED WORKING.
My blackberry got ink at the top of the phone so I got a lightly wet tissue and cleaned the top part of the phone after I finished cleaning it, I recognised the keyboard stopped working. The touch screen still works but the physical keyboard and all other buttons have stopped working. Please help me, I really ened that phone for emergency uses, etc. I do not want to restore my phone so do not suggest that solution.
UPDATE: Right now I have my phone inside a bowl of uncooked rice.
UPDATE 2: 30 minutes later, I took the phone and rebooted it the keyboard still does NOT work but the trackpad can move up and down but when pressing it does nothing.
PLEASE HELP NEED URGENT HELP.

Hi and Welcome to the Community!
30 minutes is not enough...follow EXACTLY the instructions in this FAQ:
http://www.blackberryfaq.com/index.php/Got_Your_BlackBerry_Wet%3F
Also, prepare yourself for the worst...the only thing that is predictable about moisture intrusion into a BB is that the results will be unpredictable. Since you have already re-applied power to the BB too soon, it is much more likely that you have totally fried something inside.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Program and Source Monitor buttons not working?

I need to take a screen capture of my project, but NONE of the Program monitor buttons are working. I click them and it doesn't do anything.
I'm posting this because none of the suggestions in the other discussions helped me at all.
Screen Capture worked perfectly when I used it YESTERDAY. Aside from closing the program, I can't find any other changes that have been made to either my computer or PP_CC.
I have already tried:
-Reloading PP_CC
-Restarting my computer
-Resetting my preferences (Held SHIFT while opening the program)
-Changing projects and timelines
-Adding and removing buttons to see if that did anything
I'm at a complete loss....
Is there a way to take a screenshot in the meantime while I figure out what's going on with this issue?
Working on Windows 7 64bit system

Hi,
This might help :
Go to Documents > Adobe > Premiere Pro and rename the 8.0 folder to 'old8.0' and then launch Premiere.
8.0 is Premiere CC 2014
7.0 is Premiere CC
Rename the respective folder.
Note: By doing this you will lose your customised keyboard shortcuts and custom workspaces.
Report back if it helps.
Thanks,
Rameez

Thinkvantage button not working at startup

Hi. I have the same problem with thinkvantage button.
`story`
My pc is a z61m and I was install Win server 2003, but now I need to restore factory default.
And now i have W2k3, MBR and original EISA partition on the drive, but not working F11 on startup or if i push the thinkvantage button i can choose only:
ESC to resume normal startup
F1 to enter BIOS
F12 to choose a temporary startup device/
Some time ago you give the link, I was download and make `MBR repair` but no any changes.
Can you heelp me, please, what I need to do, to diagnostic and really repair thinkvantage resque and recovery startup button/function.
Moderator Note: Edited subject to match content.

Hi and welcome to the forum!
Give this a go:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-54483
You will need to create bootable CD or floppy, this is different than MBR repair. Alternatively, you can use recovery discs provided that you created them in the factory installed OS.
Last resort would be to order the discs from lenovo for a fee.
Hope this helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Mute button, low volume button and high volume button not working after upgrade to Win7 Pro

Hi all, Im using X301. Previously it was shipped with the Vista Business. I was entitled for free upgrade to Win7 since the thinkpad was bought after 25th of June 09. The problem started after I successfully upgraded my Vista to Win7 Pro. My Mute/Unmute button was consistently in amber colour (signal for disabled). the volume button also is not working anymore. On the system side, everything was fine. the drivers is working properly.. the windows also is showing the volume is in a good shape. Unfortunately the button on the thinkpad is always on the disabled mode. Ive been searching for a related drivers that i could download and solve the issue. but till now all the softwares and drivers downloaded from lenovo could not solve my problem. any suggestion or comment is highly appreciated. thanks a million

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
When iOS 6.1 comes out I would update.

T30 freezing issues and Touchpad & Trackpoint buttons not working.

Firstly I'll explain the freezing issue (this is now the 3rd time I've typed this, as the first two times my laptop froze before I finished!)
I run my laptop with the battery at 100% and plugged in and that's fine; as is running it on battery. The problem arises when my battery is low and I plug it into recharge. Soon after it's running on a/c the screen will go black and only way to shut down is by holding the power button. If I try to restart it too soon, the indicator lights next to the power button will illuminate, but the screen will stay black. Usually after 5-10 minutes it'll boot to the IBM screen & boot the rest of the way, but not too long into normal operation it'll go black again (sometimes hitting ctrl/alt/del will bring the screen back but it would be very distorted (pixilized) and would go black again and reboot. What could be causing these problems while recharging the battery? I've tried this with a couple different batteries (both OEM IBM) and it does it with both.
Secondly, both left and right "mouse" buttons are now nonfunctional (though the middle button of the track points works.) I have the latest version of Ultranav Wizard and all the buttons are enabled. The touch pad and trackpoint ball work fine, just the 2 left and 2 right buttons do not. What could be the culprit for this issue? Luckily I have a usb mouse so that's what I'm using for the time being.
Message Edited by GoalieFergy53 on 02-14-2009 02:30 PM

My T42p Touchpad and Trackpoint work fine however,
the buttons are not responding properly.
I'm forced to use an optical mouse to properly maneuver when working on
the screen.
When the well is dry, we'll all know the value of water.

Website payment and shopping cart buttons not working on Windows Phone browser

A customer shopping on our site notified me that the "add to cart" and "view cart" buttons were taking him to the PayPal main site and not the shopping cart. I tried a Windows Phone at the Verizon store and found the same issue. I have tested the site on multiple Windows desktop browsers, on Android, Linux and iPad and have never seen this issue. What is going on with IE on Windows Phone?

I had this problem too, but I found a post burried on the web that said to add " p06- " (without quotes) before the imap and smpt server names and that worked:
p06-imap.mail.me.com
p06-smtp.mail.me.com
Everything stays checked, SSL for both, authentication and use same username and password checked.

Captivate 3 - Continue and Review Quiz Button Not Working

I have just published a SCORM course in Captivate. It works perfectly fine once I've uploaded it into the LMS except one small part. I've set up the quiz so each learner is required to pass the quiz in order to complete the module. At the end of the quiz, the results page appears with two buttons (Continue and Review Quiz). Those buttons don't work.
I set up the quiz so that learners have 2 attempts to successfully complete it. If they're unsuccesful, the continue button should direct them to the beginning of the quiz so they could retake it. If they have successfully complete, the continue button should take them to the next slide. That's not working. For some reason, the continue button only works if the learner has failed the quiz. The Review Quiz button also doesn't work. I did select the option allowing them to do so. Can someone please help?

Hi there
Please send me a private E-Mail message to rstone75 (at) kc (dot) rr (dot) com and advise of the exact file name of the file you are linking to.
I'll send you back a file that you can use to test and see if the link works.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Ipad dipped in water and sleep/wake button not working properly?

My son dipped my ipad 2 in the water bucket for like half a second the ipad,before this ipad was out of battery and was off! i quickly took it out dried all the excess water and even used a blow dryer to dry it,after a quick dry i tried to swtich it on and everything is working okay till now except the wake/sleep button,its not locking the screen or not switching off the ipad. it did turned it on but its not locking the screen or turning off the ipad!
when i tried reseting it from the general menu in settings it turned off and then the apple logo kept on coming for like 5 seconds and then going away this keeps on happening till i dont keep a hold off the sleep/wake button to switch it on or till the ipad runs out of battery,then if i hold the wake/sleep button to turns it.
One more problem im facing as soon as the ipad turned.it gives me power off option everytime then iv to cancel it to use my ipad.
so the main question is my sleep and wake button is turning on my device but not working while its on,what would be the problem and whats the solution?
p.s. i was tensed about it so i quickly turned it on to check whether its working,i know i shouldnt had turned it on :/
currently my ipad is off and iv put it under a fan to dry,thinking this might might help but im feeling it wont now its too late:(

Hello:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
That resets the iPad. If that does not work, I am afraid it has been damaged by the "water dip."
Barry

ThinkVantage button not working

There is no response when I press the ThinkVantage button on my R61i.

Try to download the ThinkVantage Productivity Center via the following link.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67856
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

Lock button and lower volume button not working.

Any advice if a button stops working? I don't know why either

Did you try resetting/rebooting the iPad by holding down on the lock and home buttons at the same time until the Apple Logo appears on the screen. I realize that involves using the lock/sleep button, but if it is a software issue, it might help. Give it a try.
Without knowing more about the problem, your next step might be resetting all settings and then restore the iOS software after that. If those fail to help, then a trip to an Apple Store should be the next step for you.
It could be a hardware issue and since both buttons are on the right side of the iPad, there might be some connection between the two buttons that is causing the problem.

Iphone 4 backup terms and condtions accept button not working!!

Help!
Ive got an iphone 4 which ive had trouble with,recently lost all music/apps etc so ive bought an iphone 5s. man in o2 shop said do a full backup on iphone4 b4 setting up 5S which so far is successful but as ive come to accept full t and c's i press accept button and nothing is happening!! What can i do. Getting on my nerves, all i want is new phone working and cant get this one to do its thing!

I had the same issue (stuck in "Connect to iTunes" logo mode) and looked around for a resolution. I didn't find an answer posted anywhere. I ended up holding down the power button and the home button for about 20 seconds before it finally came back and said I had to restore it. Once restored, everything is fine.
My problem was caused when I accidentally closed the iTunes window when I was updating the software (I meant to turn off the volume as a song was playing, but clicked on the window close button instead of the pause button). I tried holding both buttons for the recommended 10 seconds several times and it didn't clear the problem. Holding both buttons for a longer period of time did the trick for me.
I hope this post is useful to others.

Iphone 5 touchscreen unresponsive and sleep/wake button not working

Iphone 5 suddenly stopped working and I cant restart it. What do I do?

Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

Fn shortcuts and blue thinkvantage button not working

Similar Messages

Maybe you are looking for