Fnd.mk file usage ....

Hi,
What is the use of fnd.mk file.
Thanks & Regards,
Srikanth

fnd.mk exists under $FND_TOP/lib directory and it is used to link all Oracle Application Object Library stand-alone programs (i.e. generate executable files).

Similar Messages

  • High Page Reads/Sec on Windows 2008 R2 64-bit running on VMware but very low Real Memory & Page file Usage.

    Hello All,
    Below is the server configuration,
    OS: Windows 2008 R2 Enterprise 64 Bit
    Version: 6.1.7601 Service Pack 1 Build 7601
    CPU: 4 (@ 2.93 GHz, 1 core)
    Memory: 12 GB
    Page file: 12 GB
    1. The actual utilization, be it a 15 minute sample, hourly, weekly etc, the utilization of real memory has never crossed 20% and the page file usage is at 0.1%. For some reason, the Pages/Sec>Limit% counter reports 100% continuously regardless of the
    sampling intervals. Upon further observation, the Page Reads/Sec value is somewhere between 150~450 and Page Input/Sec is somewhere between 800~8000. Does this indicate a performance bottleneck? (I've in the interim asked the Users, App. Owners to see if they
    notice any performance degradation and awaiting response). If this indicates a performance issue, please could someone help list down how to track this down further to which process/memory mapped file is causing it? and what I should go about performing to
    fix this problem please?
    p.s., initially the Security logs were full on this server and since page file is tied to Application, Security and System logs, this was freed up to see if this is causing the high page reads but this doesn't.
    2. If the above does not necessarily indicate a performance problem, please can someone reference few KB articles that confirms this? Also, in this case, will there be any adverse effects if attempting to fine tune a server which is already running fine?
    assuming App. Owners confirm there isn't any performance degradation.
    Thanks in advance.

    Hi,
    Based on the description, we can try to download Server Performance Advisor (SPA) to help further analyze the performance of the server. SPA can generate comprehensive diagnostic reports and charts and provides recommendations to help you quickly analyze
    issues and develop corrective actions.
    Regarding this tool, the following articles can be referred to for more information.
    Microsoft Server Performance Advisor
    https://msdn.microsoft.com/en-us/library/windows/hardware/dn481522.aspx
    Server Performance Advisor (SPA) 3.0
    http://blogs.technet.com/b/windowsserver/archive/2013/03/11/server-performance-advisor-spa-3-0.aspx
    Best regards,
    Frank Shen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Page File Usage heavy with WebCamCenter

    First of all the Camer (Web Cam Live) is installed and working fine with all other related applications but when I start the Creative WebCamCenter my processor and Page file usage goes thru the roof and my PC is then so unresponsive as to be useless.
    XP Pro, SP2
    52k Meg Ram
    Norton Anti Virus 2004 & Netgear WG5 Wireless Network are the only other programs launched on startup.
    Any Ideas anyone?
    and Yes, I've uninstalled, re-installed (both with original and new Drivers) with no improvement.
    Message Edited by Maskerade on 10-31-2004 09:17 PM

    Maskarade,
    Have you tried installing with your AntiVirus and Firewall programs disabled? Disabling these during the install can help in making sure that you aren't experiencing any interference from these programs.
    Jeremy
    Message Edited by Jeremy-CL on 11-02-2004 08:41 PM

  • Swap file usage

    Hi
    We have recently updated a MII Server from Netweaver CE 7.1 SP4 with MII 12.1.5 (Build 86) to Netweaver CE 7.1 SP5 with MII 12.1.9 (Build 109). The MII server is running on a Windows Server 2003 64-bit with 8GB of RAM.
    After the update the swap file usage has increased from an average of 5-10% usage to now close to 80% usage. The only thing changed is the Netweaver and MII version, please advice how to proceed?
    Best Regards
    /Simon Bruun

    The first thing that happens on a new system has nothing to do with the swap file. It's the creation of the hibernation image file that is roughly equal to the amount of RAM in your computer. I'd guess yours is around 8 GBs.
    It's a terrible idea to try and run the computer from a flash drive. That may be useful for creating an installer disk or an emergency recovery disk that you use once in a while.
    Your only temporary solution is to change the hibernation mode and erase the hibernation sleep image file.
    Open the Terminal and paste the following at the prompt:
         sudo pmset -a hibernatemode 0
    Press RETURN.
         rm -rf /var/vm/*
    Press RETURN.
    After the first command you will be prompted to enter your admin password which is not echoed to the screen - type carefully.

  • Need alerting on Page File % usage

    Hello-
    We are using SCOM 2012R2 for our environment- this is exactly what I need to accomplish
    1. Monitor File Page Percentage used
    2. Establish a warning and critical state, lets say warning at 90% usage and Critical at 95% on only the page file
    3. We have email alerting and is running perfectly- numerous tests
    Does SCOM have the ability to do this out of the box??? If so could you walk through it for me
    Thank you for your time
    GunnySFA

    Hi Gunny,
    SCOM Can do more than that. Yes it is possible.
    You need to create 2 unit monitors for that. 1 for Warning 90% usage and the second for Critical
    at 95%.
    Create a unit monitor with the below performance counter for Page file usage in %
    Monitor target : Windows Server Operating System (Will alert if this appears on all the agents running windows server o/s)
    Select the items as below:
    Object: Paging File
    Counter: % Usage
    Instance: Check the box below as all instances are needed.
    Click next and mention the threshold 90%
    And select the alerting type as per the screen shots.
    Last Check enable the alert and the severity (Warning or critical) 
    Create the same way for another Critical for 95 %
    Apologize for a mixed screenshot. Microsoft allows only 2 photos per answer. 
    If screen shot is not visible open it in a new window to enlarge.
    Let me know if any doubts.
    Gautam.75801

  • RE: (forte-users) .fnd & .fso files ?? What are them,how to generate th

    'kay dudes.
    complcl does the trick
    thanks
    j-p
    -----Message d'origine-----
    De: Jean-Paul Gabrielli [mailto:Jean-Paul.Gabriellisema.fr]
    Date: mercredi 4 octobre 2000 11:39
    À: zeForte-users
    Objet: (forte-users) .fnd & .fso files ?? What are them, how to generate
    them?
    Hi,
    Sounds like an information about currency symbol is stored in the
    fnd file,
    whereas fso is binary.
    What are they, what do they come from, and how to regenerate them ?
    thanks
    j-p
    For the archives, go to: http://lists.xpedior.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

    Maybe this is something you already did, maybe not.
    You need to manually add "DCE" to the list of "Installed Libraries" in the
    properties dialog of the NT-node (using E-Console).
    Of course, don't forget to export your target environment and re-import it
    in your development environment.
    Pascal Rottier
    Atos Origin Nederland (BAS/West End User Computing)
    Tel. +31 (0)10-2661223
    Fax. +31 (0)10-2661199
    E-mail: Pascal.Rottiernl.origin-it.com
    ++++++++++++++++++++++++++++
    Philip Morris (Afd. MIS)
    Tel. +31 (0)164-295149
    Fax. +31 (0)164-294444
    E-mail: Rottier.Pascalpmintl.ch
    -----Original Message-----
    From: Tucci, Lisa M. [mailto:LMTucciWest.com]
    Sent: Friday, December 15, 2000 10:23 PM
    To: forte-userslists.xpedior.com
    Subject: (forte-users) unable to move partitions.
    We have an odd problem. We have 2 partitions that when we do initial
    partitioning are placed on our Unix node but we need to move them to our NT
    node. For some reason forte will not allow us to move these particular
    partitions. They need to have the DCE thread package to be able to move
    them to the NT node but we can't seem to find any way to give them that
    thread package. Any suggestions, documentation anything would be greatly
    appreciated. We are due to deploy this application on Monday and are unable
    to do anything until we can get these partitions moved. We have been able
    to move them in the past but it seems to have been a fluke. We have not
    found any identifiable pattern of what has allowed us to move these
    partitions.
    Thanks!
    Lisa M. Tucci - Applications Programmer
    Inbound Forté Application Support and Development - West Telemarketing
    Corporation
    tel.: (402) 964-6360 ex: 208-4360 stop: W8-IS e-mail: lmtucciwest.com
    For the archives, go to: http://lists.xpedior.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

  • File usage

    I have just realised, that F-secure occupies a massive amount of space on my SSD drive - >5 GB, in a folder called guts.sp.f-secure.com. Can this be emptied/deleted? I have Windows 7. Alternatively, is it possible, to install F-secure on my secondary (much larger) D drive? Thanks! I would attach a picture but it doesn't seem to be possible...

    Hello, Sorry for my reply (simply there was silence) and questions. But which version of F-Secure there?Mainly guts.sp.f-secure.com should be (or can be) about updates (some kind of cache or backup about last known previous version of files for prevent situations, when updating process goes be wrong). But not really sure.. that it's can be with five GB around. Just if there was stuck or known trouble. And potentially... on current time.. it's should be with name about "guts2". I not really friendly with SSD. and maybe there means that "usage" (all time) for current folder as read/write.With current meanings... maybe it's not possible to re-place folder (such as it default place under system folders?!). If there other variants. Maybe it's comes from previous installations/versions and not properly cleaned.Maybe there will be more nice to get support from F-Secure team. But my steps can be there about trying to "reinstallation" with experience about "F-Secure Uninstallation Tool" (as cleaning for stuck folders about previous version) or manual clean-action...    but with any of steps.. maybe can be important information about version of F-Secure solution. Sorry if it was not helpful.   

  • Not memory consumed, no swap file usage

    We have a 4 processor Windows 2000 server with 4 gig of Ram.While running a data load and calc process against one database in Essbase that pegs the cpu at 2 gig, the Essbase server info window shows no memory being used and no swap file space being used....Why? Is this a bug in Essbase, do other people note the same problem?Thanks for any insight you can provide,GeorgePS - We're on Essbase 6.1 patch 3a.

    Essbase has configurable parameters that control RAM usage - specifically:The Index CacheThe Data CacheThe Data File CacheThe Calc CacheThese settings will have an effect on what memory Essbase uses during a calc. They can be found in Database / Settings using Application Manager.Regards,Jade===============================Jade ColeSenior Business Intelligence ConsultantClarity [email protected]

  • Additional file usage

    Hi all,
    When we create a orginal application file in a DIR , we can create an additional file with original application file. Such additional file can be template or layout or picture.
    I am able to create an addtional file with original application file. How to view this addtional file in DMS?
    Also for what purpose we can use this application ?
    Thanks,
    Hemant

    Hi Sham,
    i just have the same requirement to make use of Additional file option in CV01N,
    the senario is we have Word files *.doc, and inside these Word files have attachment of Excel files,
    the Word file is checked in to Server, and the excel file is maintained as Additional File.
    but when i open the Word file in SAP i could not open up the Attached Excel file in it.
    i have maintained the proper workstation Setting for both *.doc and *.xls file. but still unable to open up the Excel file stored inside Word file.
    where am i missing any configuration or any specific note is to applied.
    thanks and regards
    Kumar

  • Limiting Swap File Usage

    i have an issue with my main drive, and whilst i am getting this sorted, in the meantime i have installed a new installation of mavericks onto a 16gb flash drive.
    now a usual fresh install of mavericks takes about 5.8gb and this should leave me a few gb to work with, but alas, the swap file has kicked in and filled all the free space leaving me 688mb on the flash drive. this is fine for using safari, but hopeless on trying to update flash.
    how can i manually set a limit to the swap file?
    this is a temporary solution until the main drive is fixed, so I'm not stressed about longevity of the problem.

    The first thing that happens on a new system has nothing to do with the swap file. It's the creation of the hibernation image file that is roughly equal to the amount of RAM in your computer. I'd guess yours is around 8 GBs.
    It's a terrible idea to try and run the computer from a flash drive. That may be useful for creating an installer disk or an emergency recovery disk that you use once in a while.
    Your only temporary solution is to change the hibernation mode and erase the hibernation sleep image file.
    Open the Terminal and paste the following at the prompt:
         sudo pmset -a hibernatemode 0
    Press RETURN.
         rm -rf /var/vm/*
    Press RETURN.
    After the first command you will be prompted to enter your admin password which is not echoed to the screen - type carefully.

  • Basic jar file usage question

    I have developed a java project in eclipse. To develop this, I have used many external jars that I added in Java Build Path.
    I exported this project as jar file.
    Now I want to use class files in this project in the jsp page.
    The problem is where should I put my jar file of this project and also the external jar files that I used. I made a WEB-INF folder in my project folder but still it is creating errors.
    Please suggest.

    HI,
    I put both my project jar file, and the external jar file on which it is dependent in WEB-INF/lib directory. It can find my project jar file but not the external jars(axis.jar) and gives the errors as:
    java.lang.NoSuchMethodError: org.apache.axis.description.ParameterDesc.setItemQName(Ljavax/xml/namespace/QName;)V
    Could you please tell what is the problem. Under which path it looks for the external jars?
    Edited by: Popup on May 15, 2008 8:18 AM

  • Identify database file usage

    I would like to identify over the last X seconds how much data has been written and read from each database file by SPID, is this possible? I want gather information on our busiest files and processes.
    Id like to be able to do this in TSQL rather than using profiler.

    Hi Jameslester,
    We can capture the information about reading and writing transaction log file via DMV or SQL Server Profiler when your perform any database activity. We will run a few DML scripts to check how data insertion, updating or deletion is logged in the database
    log file. During this operation you can also track how a page is allocated or de-allocated. For example, page splits like how many times page splits occur, on which page and during which operation. However, personally, we could not
     identity how much data has been written and read from database file in the last X seconds by using T-SQL.
    There is more information about how to read the SQL Server Database Transaction Log, you can review the following article.
    http://www.mssqltips.com/sqlservertip/3076/how-to-read-the-sql-server-database-transaction-log/
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • FF14 paging file usage

    After some time of inactivity firefox starts offloading its ram continent to paging file, this results in firefox not responding until it load it's continents back from paging file to ram (usually takes up to a minute). How do I turn off paging file use? (I can't turn off paging file entirely due to other programs).

    Firefox can't control that.<br />
    It is the Windows Operating System that decides which memory pages to swap to disk t make room for other programs.
    If it happens that often then it sounds that you do not have enough memory installed or try to run too many programs simultaneously and Windows runs out of memory.

  • 3D printer - file usage and printing control

    I hope you can clarify the below.How a 3D printer file can limit the number of copies the user can print ? Does it have an attribute? Can you provide files to print wich are editable or read only ?  For example if I send a file I don’t allow to print more than 3 copies neither change the file (the design).  I assume file delivery in the internet can be secured with a key as any other encryption , correct ?I found HP to be the most popular printer and standard  but not the only one  http://www8.hp.com/us/en/commercial-printers/floater/3Dprinting.html . 

    Hi yoelapin, and welcome to the HP Support Forum. HP announced its Multi Jet Fusion 3D printing technology in late October 2014. Widespread access to this technology for consumers is not expected to become available until 2016. At this time consumers will have affordable access to HP's 3D printing technology through service bureaus (3D print service providers). The questions you ask in your post are all related to how the service bureau interacts with its customers and are not unique to HP's Multi Jet Fusion 3D printing technology. Thanks for your interest in HP's 3D printing offering and check back in to the website in your post for further news as it becomes available. Best.

  • Cgicmd.dat file usage

    Hi,
    I am generating my reports using the cgicmd.dat file in pdf format and my application is in web-based html.
    I have a report which passes 4 paramters and 2 of it is considered imortant (and dynamic according to user interaction in the begining) and should not be changed by the users. I have found out that by using the parameter forms like %P, %PT and %PC entry in the cgicmd.dat file would means that I cannot use other user parameters in the file entry, and so also in the reverse situation.
    But when I tried to put both of them (%P and %1..%4 for user parameters) together, then call up the reports with the parameter values included in the entry (like http://server/repserver/?repname+value1+v2+v3+v4), I seems to be able to pass the important values to the displayed parameter form while hiding them and asking the users to enter only the other 2 parameters which they may change.
    But then, when I submit the form, it gave me an error:
    ======================================================
    Error: The requested URL was not found, or cannot be served at this time.
    Oracle Reports Server CGI - Error occurred while parsing the Reports Server command line.
    ======================================================
    May anyone assist me on how I can make use of the parameter form and also passing in some values that are dynamic and cannot be changed by the users?
    Thank you in advance for your assistance!

    FYI...
    Our dev and prod are at the same levels. I was able to narrow the problem down further, however. It appears to be a row size problem. If I force a rownum < 1500 in my report's query, then it works fine on dev and prod. If I force a rownum < 2000, then it crashes the engine on prod. The reason it works on dev and not on prod is that the amount of data on dev is far less than prod. Also, I ran the report locally on my PC against the prod database and it gave me a little more info. The report appears to query all of the rows fine, but it gets an ArrayIndexOutOfBounds exception. Since the report comes back with all rows just fine using a DESFORMAT other than DELIMITED, I believe it's a bug with applying the delimiter when formatting the report. The admins say that we are a few patchsets behind, so I'm guessing it is a fixed bug already.
    Thanks.

Maybe you are looking for