FND-UT-CMT: ORA-01041: internal error. hostdef extension doesn't exist

I am applying patch PO RUP 22, after merging patch->10207297,11669329,7632187,9878808. However for 1 file -INVITPSB.pls, i am getting status running, but in the adorker log file shows ->
AD Worker error:
The following ORACLE error:
ORA-03114: not connected to ORACLE
occurred while executing the SQL statement:
UPDATE fnd_install_processes
SET skip_flag = ''
WHERE worker_id = 1
Error comitting pending transactions and closing Pro*C connection.
The error is:
FND-UT-CMT: ORA-01041: internal error. hostdef extension doesn't exist
AD Worker is exiting with failure.
Any ideas of what can be done?

HI,
Please check if solution in below metalink note helps:-
Patch 4143498 Fails With ORA-01041,ORA-03114 Errors On Iscrf70b.Pls ORA-01041 [ID 340238.1]
Thanks,
JD

Similar Messages

ORA-01041: internal error. hostdef extension doesn't exist

hi all,
i am presently working on logical standby database
but i am facing a problem from primary database
" select * from V$ARCHIVE_DEST"
LOG_ARCHIVE_DEST_1 valid
LOG_ARCHIVE_DEST_2 ERROR ORA-01041: internal error. hostdef extension doesn't exist
at present database not synchronizing
please help
in alert.log file at primary
ARC9: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (1041)
ARC9: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
PING[ARC9]: Error 1041 when pinging standby 'standby server'.
Standby database is in running mode & well connected with network
Vaibhav
Edited by: Vaibhav Dixit on Oct 20, 2011 4:43 PM
Edited by: Vaibhav Dixit on Oct 20, 2011 4:43 PM

okkk
thanks for reply
i m also getting some problem in standby database in just 2-3 days
error is ->
ORA-03135: connection lost contact
LOG_ARCHIVE_DEST_2 ERROR ORA-01041: internal error. hostdef extension doesn't exist
then
i have passed some command on primary db & now it's working but i don't know it's good for db or not
ALTER SYSTEM SET log_archive_dest_state_2=’DEFER’ SCOPE=BOTH;
ALTER SYSTEM SET log_archive_dest_state_2=’ENABLE’ SCOPE=BOTH;
please give a idea to resolve this problem
regards
Vaibhav

ORA-01041: internal error. hostdef extension doesn't exist in forms 10g

While Compiling the forms 10g I'm getting this error, pls help me on this problem.

Check this link... ORA-01041: internal error. Hostdef extension doesn't exist
hope this helps

ORA-01041: internal error. hostdef extension doesn't

Hi,
I am getting the followin error message when i am trying to run a sql script.
select
ERROR at line 1:
ORA-01041: internal error. hostdef extension doesn't exist
Pls let me know the remedy
Thanks

Hi !
I try to create database by Database Configuration Assistant in "windows 2000 advance server, ORACLE9i". Process in 12% that error appear.
when i Ignore this error the ORA-240324: Service handle not initialized appearance
Please Help me to fix that error !

ERROR: ORA-01041: internal error. hostdef extension does not exist

Hi, I got the following error message when I tried to insert a row in table TBL_ORDER.
ERROR:
ORA-01041: internal error. hostdef extension does not exist
INSERT into TBL_ORDER
ERROR at line 1:
ORA-03113: end-of-file on communication channel
We have Oracle version 8.1.5.o.2 and Linux version 6.1.
Following are the tables, triggers, loadjava definition and source programs:
TBL_ORDER
1 ORDER_MEMBER_FIRM_ID VARCHAR2(4)
2 ORDER_CLIENT_ID VARCHAR2(4)
3 ORDER_BRANCH VARCHAR2(3)
4 ORDER_SEQUENCE VARCHAR2(4)
5 ORDER_EXCHANGE_ID VARCHAR2(3)
6 ORDER_EXCHANGE_SEQUENCE VARCHAR2(7)
7 ORDER_CREATE_DATE DATE
8 ORDER_TYPE VARCHAR2(2)
9 ORDER_STATUS VARCHAR2(1)
10 ORDER_SYMBOL VARCHAR2(5)
11 ORDER_SUFFIX VARCHAR2(14)
12 ORDER_SIDE VARCHAR2(5)
13 ORDER_PRICE VARCHAR2(20)
14 ORDER_STOP_PRICE VARCHAR2(20)
15 ORDER_PRICE_QUAL VARCHAR2(10)
16 ORDER_QUANTITY VARCHAR2(6)
17 ORDER_TIF VARCHAR2(4)
18 ORDER_AON VARCHAR2(4)
19 ORDER_DNR VARCHAR2(4)
20 ORDER_CASH_NEXT_DAY VARCHAR2(4)
21 ORDER_SELLER VARCHAR2(4)
22 ORDER_ACCOUNT_TYPE VARCHAR2(4)
23 ORDER_OS_TS VARCHAR2(4)
24 ORDER_BOOTH_ID VARCHAR2(4)
TBL_CMSOUT
1 CMSOUT_MEMBER_FIRM_ID VARCHAR2(4)
2 CMSOUT_CLIENT_ID VARCHAR2(4)
3 CMSOUT_DATA VARCHAR2(120)
trg_order.sql
create or replace procedure OrderToCmsoutProc(cms_member_firm_id VARCHAR2,
cms_client_id VARCHAR2,
cms_branch VARCHAR2,
cms_sequence VARCHAR2,
cms_side VARCHAR2,
cms_quantity VARCHAR2,
cms_symbol VARCHAR2,
cms_price VARCHAR2,
cms_tif VARCHAR2,
cms_type VARCHAR2)
AUTHID CURRENT_USER
as language java
name 'OrderToCmsout.test(java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String)';
show errors;
create or replace trigger trg_order
after insert on TBL_ORDER
for each row
CALL OrderToCmsoutProc (:new.order_member_firm_id,
:new.order_client_id,
:new.order_branch,
:new.order_sequence,
:new.order_side,
:new.order_quantity,
:new.order_symbol,
:new.order_price,
:new.order_tif,
:new.order_type)
commit;
show errors;
exit;
trg_cmsout.sql
create or replace procedure PackCmsoutSidProc(pck_member_firm_id VARCHAR2,
pck_client_id VARCHAR2,
pck_data VARCHAR2)
AUTHID CURRENT_USER
as language java
name 'PackCmsoutSid.test(java.lang.String,
java.lang.String,
java.lang.String)';
show errors;
create or replace trigger trg_cmsout
after insert on TBL_CMSOUT
for each row
CALL PackCmsoutSidProc (:new.cmsout_member_firm_id,
:new.cmsout_client_id,
:new.cmsout_data)
commit;
show errors;
exit;
loadORDERjava
loadjava -r -f -o -user userid/pswd OrderToCmsout.java
loadCMSOUTjava
loadjava -r -f -o -user userid/pswd PackCmsoutSid.java
OrderToCmsout.java
import java.sql.*;
import java.lang.*;
import java.io.*;
import oracle.jdbc.driver.*;
public class OrderToCmsout {
public static void main(String args[]) {
try {
test (args[0],args[1],args[2],args[3],args[4],
args[5],args[6],args[7],args[8],args[9]);
catch (Exception e) {
System.err.println(e);
} //catch
} // end main
public static void test ( String parm_member_firm_id,
String parm_client_id,
String parm_branch,
String parm_sequence,
String parm_side,
String parm_quantity,
String parm_symbol,
String parm_price,
String parm_tif,
String parm_type)
throws SQLException
Connection conn = new OracleDriver().defaultConnection();
PreparedStatement stmt2;
try {
stmt2= conn.prepareStatement
("INSERT INTO TBL_CMSOUT VALUES (?, ?, ?)");
String datastring = parm_member_firm_id + "\\~" +
parm_branch + " " +
parm_sequence + "\\~" + "\\~" +
parm_side + "\\~" +
parm_quantity + " " +
parm_symbol + " " +
parm_price + "\\~" +
parm_tif + " " +
parm_type + "\\~";
stmt2.setString(1, parm_member_firm_id);
stmt2.setString(2, parm_client_id);
stmt2.setString(3, datastring);
stmt2.executeUpdate();
stmt2.close();
return;
} //try
catch (Exception e) {
System.err.println(e);
} //catch
PackCmsoutSid.java
import java.sql.*;
import java.lang.*;
import java.io.*;
import oracle.jdbc.driver.*;
public class PackCmsoutSid {
public static void main(String args[]) {
try { test(args[0],args[1],args[2]);
catch (Exception e) {
System.err.println(e);
} //catch
} // end main
public static void test( String parm_member_firm_id,
String parm_client_id,
String parm_data)
throws SQLException
try {
Connection conn = new OracleDriver().defaultConnection();
PreparedStatement stmt1 = conn.prepareStatement
("SELECT sid_session_id " +
"FROM tbl_sid " +
"WHERE sid_member_firm_id = ? and " +
"sid_client_id = ?");
stmt1.setString(1, parm_member_firm_id);
stmt1.setString(2, parm_client_id);
ResultSet rs1 = stmt1.executeQuery();
while (rs1.next ()) {
String session_id_found = rs1.getString
("sid_session_id");
CallableStatement pack_pipe = conn.prepareCall
("{call DBMS_PIPE.PACK_MESSAGE(?)}");
pack_pipe.setString(1, parm_data);
pack_pipe.execute();
CallableStatement send_pipe = conn.prepareCall
("{? = call DBMS_PIPE.SEND_MESSAGE(?)}");
send_pipe.registerOutParameter
(1, java.sql.Types.INTEGER);
send_pipe.setString (2, session_id_found);
send_pipe.execute();
} //while
stmt1.close();
conn.close();
} //try
catch (Exception e) {
System.err.println(e);
} //catch
} //test
} //PackCmsoutSid
Thanks in advance for your help
Vinicio

you should post this question on the Application Server forum.
--Olaf

ORA-01041: internal error. hostdef

Hi
I install oracle 9i
I selected the options to install
the Enterprise version with a General Purpose started database.
The installation went through smoothly until it reached the final step of using
the Oracle Database Configuration Assistant. The following are the 4 steps for
this phase :
1. Copying database files
2. Initializing database
3. Creating and Staring Oracle instance
4. Completing Database Creation
The installation completed the first 2 steps successfully. During the 3rd step, it
gives the error message :
ORA-01041: internal error. hostdef extension doesn't exist
Any ideas on what could be causing this ?
what should i do to resolve this error?
Thanks

From Oracle documentation
"ORA-01041 internal error. hostdef extension doesn't exist
Cause: Pointer to HSTDEF extension in HSTDEF is null.
Action: Contact Oracle Support Services."

ORA-01041: internal error. hostdef doesn't exist

Linux Advanced Server + Oracle 9.2.0.1.0
Trying to sqlplus
conn / as sysdba
Error
ORA-01041: internal error. hostdef doesn't exist
What does it mean ? what I should do to be able to connect to the database.
TNSNAMES.ora seems fine
Linstener is up and running
Any ideas? Thanks

you might be installing the Softawre across the network and
after some time your connection get disconnected.
or you checkout the resouresc if you are doing in the server
putting cd on the server.

ORA-01041: Internal Error. HOSTDEF extension does not exist

Hi all,
In the database I provided with the commando
ALTER DATABASE BACKUP CONTROLFILE TO TRACE; a trace file with the Script for the production my controlfile. Now I would like to test this Script. I have install a new test DB. Then I shutdown the database and renamed the control files - to see particularly over, which error message become there indicated. Afterwards I wanted to start the Script from the trace file to create a control file. But after I STARTUP MOUNT; in SQL*Plus entered, I become these error messages:
LRM-00109: could not open parameter file 'C:\Oracle\Ora920\DATABASE\INIT%ORACLE_SID%.ORA'
ORA-01078: failure in processing system parameters
How have I understood, Oracle tries to find the init file local on my machine. Those lies however on the server. Then I entered:
startup pfile=\\server1\oracleserver\admin\orcltest\pfile\initorcltest.ora
Can I enter a file, which does not lie locally on my computer with the instruction STARTUP pfile =...? After I made that, I become only this error message:
ORA-01041 internal error. hostdef extension doesn't exist
And the database is closed. I can't connect with it.
Regards
Leonid Pavlov

As far as I know, if you want to start/stop Oracle through sqlplus you need to be using a copy of sqlplus on the server. If your server is an *NIX box, then you can telnet to the server and run sqlplus. If your server is windows then you will need something like VNC, PC-Anywhere or sneakernet to physically attach to the server.
HTH
John

ORA.01041:internal error-- IN R12

Hi All,
While testing oracle seeded reports we are getting this error. As per the error i have checked in the PL/SQL code, i found that no views are existed in the R12 which are existed in 11i.
EX..
AR_CUSTOMERS_V -- existing view in Oracle 11i
AR_CUSTOMERS -- existing view in Oracle R12
Could any one suggest me how i can achieve this issue.
Thanks,
RED.

There is no such a document which shows tables mapping between 11i and R12. However, to determine the difference between 11i and R12, you can refer to eTRM and the Content Document manuals, both should be helpful.
Applications Electronic Technical Reference Manuals (eTRM)
http://etrm.oracle.com
Note: 404152.1 - E-Business Suite Release 12: Release Content Documents
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=404152.1

Hostdef extension doesn't

When I try to create an index on spatial column on oracle on solaris
create index scott.cities on scott.cities(geom) indextype is
mdsys.spatial_index parameters ('SDO_LEVEL = 11 SDO_NUMTILES=4
SDO_MAXLEVEL=28 SDO_COMMIT_INTERVAL =1000')
I get an error ORA-01041: internal error. hostdef extension doesn't
exist
Can anyone help please

Not sure why you are getting the hostdef
error.
If you send me an e-mail with your contact info (i.e. phone number) I can try and
help out.
Some things to check are that your
USER_SDO_GEOM_METADATA entries are
populated correctly.
**NOTE**
In Oracle 8.1.6, we recommend
fixed indexes in almost all cases (i.e.
SDO_NUMTILES=0, or omit the SDO_NUMTILES
parameter).
Also, it is not recommended
to modify the SDO_MAXLEVEL parameter.

ORA-00600: internal error code, arguments: [ktsircinfo_num1]

While taking export of a table received EXP error and while dropping/selecting the same gor ora-600 errors.
. . exporting table TEST4
EXP-00003: no storage definition found for segment(29, 371385)
SQL >Drop table test4 cascade;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
sql> Desc test4;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
I dont want to log TAR with oracle right now... I tried dropping and recreating Undo tablespace but still did not help much . Database version is 9204

hi
read metalink ID - 153788.1
CHeers

ORA-00600: internal error when delete master rows in a materialized view

I have a materialized view in 11g2 on Redhat 5, defined asCREATE MATERIALIZED VIEW mv_idty
PARALLEL BUILD IMMEDIATE REFRESH FAST ON COMMIT ENABLE QUERY REWRITE AS
select IDTY_NAME_FIRST,IDTY_NAME_MIDDLE,IDTY_NAME_LAST,IDTY_NAME_SUFFIX,IDTY_SSN,
IDTY_DR_LIC_NUM,IDTY_DR_LIC_STA,x.person_id,i.rowid i_rowid,x.rowid x_rowid
from idty i,person_x_idty x where x.idty_id=i.idty_id; I deleted a few rows from the master tables and get error13:58:48 SQL> delete idty where idty_id like 'test_row%' ;
7 rows deleted.
13:58:52 SQL> commit;
commit
ERROR at line 1:
ORA-12008: error in materialized view refresh path
ORA-00600: internal error code, arguments: [kkzfrfajv_markdml-1], [], [], [], [], [], [], [], [], [], [], [] I have other materialized views and they all delete master OK. This is the simplest one but causes problem. HELP!
Edited by: user13148231 on Aug 11, 2010 5:45 PM

Checked note 743766.1. It is not 100% relevant as it is about import, but the query is usefulselect sowner, vname, mowner, master from sys.snap_reftime$It reveals the materialized view some how based on other schema.
Recreate the materialized view. problem solved.

ORA-00600: internal error code, arguments: [unable to load XDB library]

hi everybody ;
i have 9.2.0.7 db runs on SLES9 on host A. and i take full rman database backup to make a new database on different host ( host B ) with different file structure. ( sid is the same ) i had already 1 database on host B. after this duplicate now there are 2 database on host B.
i take daily full database rman backup on the new host for my new database and there is no problem. when i try to take extra full export backup i get an error ;
Dynamic link error: libxdb.so: cannot open shared object file: No such file or directory
*** 2010-08-05 09:46:12.868
ksedmp: internal or fatal error
ORA-00600: internal error code, arguments: [unable to load XDB library], [], [], [], [], [], [], []
as i search ; i have to stop the database and listener and set the LD_LIBRARY_PATH variable. how can i make this without make any mistake for the first database runs on Host B.
because 2 database must be up and running on host B. can you explaın these operation step by step ?
thank you ....

craft wrote:
any idea ?
>any idea ?
your database is out off support you should consider to upgrade. ORA-00600 indicate for bug

ORA-00600: internal error while running procedure in oracle 7.3.4

I am using Oracle 7.3.4 running on HP-Unix. While running a procedure, I am getting the following error.
ORA-00600: internal error code, arguments: [15419], [severe error during PL/SQL execution], [], [], [], [], [], []
ORA-06544: PL/SQL: internal error, arguments: [77102], [], [], [], [], [], [], []
ORA-06553: PLS-801: internal error [77102]
Please suggest what could be the problem. Incidentally, the same procedure is running on another installation of Oracle 7.3.4. I am unable to find out what could be the difference between the 2 Oracle instances that is causing this problem.
Please help.
Thanks in advance.

Are there any trace files created on the server?
Did you see if they have any more information?
Generally, these types of errors suggest contacting Oracle support to resolve the issue, but with the Oracle version you are using being already desupported, it would be an issue.
Alternatively, you could search metalink to see if there is any support note on this type of error.

ORA-00607: Internal error occurred while making a change to a data block

hi
i hv use testing purpose oracle 10 Xe in unix
but when today i hv connect database following error occured
SQL> startup
ORACLE instance started.
Total System Global Area 83886080 bytes
Fixed Size 1257284 bytes
Variable Size 75497660 bytes
Database Buffers 4194304 bytes
Redo Buffers 2936832 bytes
Database mounted.
ORA-00607: Internal error occurred while making a change to a data block
ORA-00600: internal error code, arguments: [4193], [625], [640], [], [], [],
I hv check alert log , but no proper solution is given , how can start database

Duh, and of course I missed the significance of
oracle 10 Xe in unix
XE is only supported for Linux - according to the downloads page that means "Debian, Mandriva, Novell, Red Hat and Ubuntu".
Oracle have not publically stated the reasons why XE is only available on Linux and Windows, but my guess is that it is something to do the Intel chip architecture. If this is so it would be possible for Oracle to port XE to run on Solaris for x86. But they have not done so yet.
Which means, alas, that you are unlikely to get any help for this one, because XE is not supported on any unix platform.
Good luck, APC

FND-UT-CMT: ORA-01041: internal error. hostdef extension doesn't exist

Similar Messages

Maybe you are looking for