FOB use on a mac

I  am using my FOB on my mac but i need the window to be larger. anyone have this problem?

Fob  a free dock-based kitchen timer for Mac OS X by Leaky Puppy Software????
Grab the lower roght corner and drag the window larger.

Similar Messages

  • Using a different .Mac account in iPhoto

    We have a .Mac family pack. My wife and I each have a personal account and we would like to use a completely different .Mac account to post our web galleries, but I don't want to have to create a new user on my Mac just to use iPhoto. Is there a way that iPhoto can use a different .Mac account than the one associated with my user account on my computer to publish galleries?
    Thanks,
    Aaron

    For POP:
    The following mail server settings will work with all AT&T email domains: @ameritech.net, @att.net, @bellsouth.net, @flash.net, @nvbell.net, @pacbell.net, @prodigy.net, @sbcglobal.net, @snet.net, @swbell.net, @wans.net.
    Email Program Settings Field:
    Enter:
    Incoming (POP)
    inbound.att.net
    Outgoing (SMTP)
    outbound.att.net(requires authentication)
    Incoming mail server:
    POP3
    Incoming/Outgoing User Name:
    Full AT&T email address, including domain (e.g., [email protected], [email protected])
    Incoming mail port #:
    995, secure connection (SSL) checked
    Outgoing mail port #
    465, secure connection (SSL) checked
    I assume the settings you are refering to gives that delay for marking the messages as read when highlighted for that period of time. Probably for scrolling through the list without changing the unread status. Lion doesn't have that selection, so I can't test that at the moment.

  • I'm using Word for Mac. Though there are various instructions on the Internet for modifying the templates, none make sense to me. They instruct to do something I can't follow. I change a template but can't save it to the template folder.

    What the ****.
    OK, I try to change a template using Word for Mac version 14.3.4 2011 edition.
    I make a change to the template but am unable to save the darned thing to the template folder; it asks for a file name like it's a new document. I want to change the blasted template but if I can't save it as a modified template, I've accomplished nothing.
    Does anyone have a solution?
    Thanks

    Support for Microsoft Office for Mac

  • How do I use my new mac instead of old one with my iphone 4

    I recently just got a new Mac and wont be able to use my old Mac because I will be leaving for college in a couple weeks. My iPhone 4 is set up with my old Mac. How do i get it to sync with my new Mac now instead of my old one? Because of space on my iPhone, I manually manage all of the music on it. When I have my iPhone connected to my new mac, it shows up in iTunes but it wont let me manage my music.

    You can use Migration Assistant to migrate your old Home folder to your new computer. Or, if all you want is your iTunes Library, then copy the /Home/Music/iTunes/ folder to an external hard drive. Then move the external drive to the new computer and restore the folder to the /Home/Music/ folder on the new computer overwriting the one that's now there.
    If you have never started up the new computer, then you can use the Setup Assistant instead of Migration Assistant to transfer your old Home folder to the new computer.
    The two computers must be connected by Firewire cable or Thunderbolt cable depending upon what they both support. The old computer is booted into Target Disk Mode while the new computer is booted normally. In Setup or Migration Assistant you would be selecting the option to migrate from another Mac or disk drive.

  • I use word for mac and keep getting an error message microsoft syn services has encountered a problem and needs to close.  tell microsoft about this problem. even if i clicked send info to m/soft the message still comes up repeatedly i've turned comp off

    i use word for mac & keep getting error message "microsoft sync services has encountered a problem & needs to close. tell m/soft about this prob" even if i tick send to m/soft and turn computer off & restart it just keeps reappearing repeatedly?

    i use word for mac & keep getting error message "microsoft sync services has encountered a problem & needs to close. tell m/soft about this prob" even if i tick send to m/soft and turn computer off & restart it just keeps reappearing repeatedly?

  • How to restore from Time Machine WITHOUT install discs using a second Mac

    It's a question that is asked repeatedly all over the web by Mac users like me that bought in to Time Machine (TM) on the assumption that if their computer died one day it would be a piece of cake to restore from it, only for that day to come and then to be told "ahh, okay the first thing is to get your computers install discs..." (loud crashing sound of world falling around ears).
    I've never been able to afford a new Mac and both of my machines were bought second-hand. Neither came with Leopard (both have Tiger and have been upgraded to Leopard via the net). This was never supposed to be a problem as I've been backing up with TM. However it appears that Tiger discs are as much use as an inflatable dart board when it comes to using TM. So I've been faced with the possibility of having to spend £130 (about two hundred Pres Sheets, Yankees) on the Leopard install discs just so that I can have the option of restoring from TM. Bonkers.
    However after much nashing of teeth, a very long weekend learning all sorts of things about 'Target Mode', 'Single User Mode', 'Verbose Mode', 'Open Source 9' etc the following solution has worked without the need to go out and buy those over-priced discs...
    What you will need:
    1 broken Mac requiring restoration
    1 second donor Mac running Leopard (or Snow Leopard so long as the broken Mac can run it)
    1 firewire cable with the correct fitting at either end to attach both Macs together
    1 Time Machine backup
    Note: The following is for when you have given up trying to boot from your hard drive. In my case I couldn't boot in to Safe Mode etc. so was forced to format my drive and re-import everything. If you've read this far I'm assuming your at the same point as well and have tried everything else that's out there first.
    Also - both my Macs are Power PC's so can't run Snow Leopard, so I can't say 100% this will work with SL (Intel) machines. From what I've read Snow Leopard will work with this procedure too, but if you've found differently please feel free to add your experiences below...
    STEP ONE: Format the corrupt Hard Drive or replace with a fresh HDD
    *Link the two computers with a firewire.
    *If you're replacing your HDD, remove your corrupted hard drive from the 'broken' machine and insert a new one.
    *Power up the broken Mac whilst holding down the 'T' key. This will start it up in Target Mode and you'll get a nice firewire symbol floating around that machine's screen.
    *Power up the second 'healthy' Mac. This will be our 'donor' machine. When it starts up after a few seconds you will see the hard drive of the broken Mac appear on the donor Mac's desktop.
    *Using your donor Mac's 'Disc Utility', format the broken Mac's hard drive (now's the time to partition it etc. if you want to).
    STEP TWO: Clone your donor Mac
    Your broken Mac is no longer broken and now needs a new OS. But you don't have the discs, right? Well get this... you can clone your donor mac on to your machine, even if they are totally different i.e. a laptop on to a tower.
    *Again using Disc Utility, click on your donor Mac's hard drive. The restore tab appears as an option.
    *Click on restore and drag the donor Mac's hard drive that contains the operating system in to the Source box.
    *Drag the newly formatted hard drive on the broken Mac in to the Destination box.
    *Click restore. Your donor Mac's hard drive will now be 'cloned' on to your no-longer-broken Mac. Once this is done, eject the first Mac's hard drive from your donor Mac's desktop. You no longer need the donor Mac.
    Ta daa! Your machine now starts up happy and smily again. Time to restore all that stuff that's been sat on your Time Machine drive...
    STEP 3: Restore from Time Machine using Migration Assistant
    This is the really clever part that prompted me to write this piece in the first place. Time Machine IS accessible without those Leopard install discs you don't have. You need to use something called 'Migration Assistant'.
    *Start up your machine as normal and you'll see it is an exact clone of the donor machine. Weird huh?
    *Attach your Time Machine hard drive. It will show up as an icon on the desktop and because of it's size, you'll be asked if you want to use it as a Time Machine backup. Err, NO YOU DON'T! Click 'cancel'.
    *Open Migration Assistant (if you can't find it just type it in to Finder and click). There are three options, the middle one being to restore from TM or another disc. Yup, you want that one.
    *Migration Assistant will now ask you what you want to restore in stages, firstly User Accounts, then folders, Apps etc. It will even import internet settings
    And that's you done. Let Migration Assistant do it's thang... altogether I had about 140gb to restore, so it wasn't exactly speedy. This wasn't helped by the fact that my TM hard drive is connected via USB (yes, I know). Just leave it alone and it'll whirr happily away...
    Before I go - you don't have an option of when to restore from, and will restore from the last Time Machine save. At least then you should be able to access TM and go 'backwards' if you need to.
    Also - for a Mac expert, the above will be up there with 'Spot Goes To The Farm' in terms of complexity. However, for the rest of us the above is only available in fragments all over the net. By far the most common response to 'how do I restore from Time Machine without install discs' is 'you can't'. If I'd found the above information in one place I could have saved a lot of hair pulling and swearing over the last couple of days, so forgive me for sharing this workaround with the rest of the world. Meanwhile your expertise will come in very handy for the inevitable questions that will get posted below, so please feel free to help those people that won't be sure if this solution is the right one for them. I'm no expert, I just want to help people that were stuck in the same situation (and looking at the web, there's a LOT of them).
    Hope this is of use to someone, thanks and *good luck*!

    Most maintenance and repair, restore and install procedures require the use
    of the correct OS X install DVD; be it an original machine-specific restore/install
    disc set or a later retail non-specific general install disc set.
    By having an unsupported system, perhaps installed via an illegal download or
    other file-sharing scheme, where no retail official discs are involved and the
    initial upgrade was done by other means outside of the License Agreements,
    you are asking us to discuss a matter of illegal installation and use of a product.
    There are no legal complete OS X system download upgrades online; only bits
    that are update segments to a retail or as-shipped machine's original OS X install.
    +{Or an installation where a previous owner had correct retail upgrade discs, &+
    +chose to not include them with the re-sale of the computer it was installed in.}+
    However, to answer the initial question. To get and use an externally enclosed
    hard drive in suitable boot-capable housing, and get a free-running Clone
    Utility (download online; often a donation-ware product, runs free) you can
    make a bootable backup of everything in your computer to an external HDD.
    This is the way to make a complete backup to restore all functions to the computer.
    The Time Machine has some limits, in that it can restore only that which it saves.
    It does not make a bootable clone of your entire computer system with apps and
    your files, to an external drive device. A clone can. And some of the clone utility's
    settings can also backup changes to an external drive's system; if that other drive
    is attached to the computer correctly.
    Carbon Copy Cloner, from Bombich Software; and also SuperDuper, another of
    the most known software names you can download and use to clone boot-capable
    system backups of your computer's hard disk drive contents, are often cited.
    However you resolve the matter of the running OS X system in your computer,
    derived from what appears to be questionable means, is part of the initial issue.
    Since you do need to be able to fix an existing installation by unmounting the
    computer's hard disk drive and run the computer from the other (install disc or
    system clone) while it is Unmounted; and use the correct Disk Utility version to
    help diagnose and perhaps be able to fix it. You can't use a Tiger version Disk
    Utility to fix a Leopard installation, and so on.
    So, the situation and replies as far as they can go (since the matter does
    constitute an illegal system, if it was arrived at without correct discs) is a
    limited one. And file sharing of copied Mac OS X (and other) software is
    also considered illegal.
    And, one way to get odd malware and unusual stuff, is to get an unauthorized
    system upgrade from an illegal source online. You never know what's inside it.
    The other reply was not a personal attack; the matter is of legal status and as
    you have a product with a questionable system, the answer is to correct it.
    And if you want to save everything in your computer, make a clone to a suitable
    externally enclosed self-powered boot capable hard disk drive. With older PPC
    Macs, that would best be to one with FireWire and the Oxford-type control chips.
    However that works out...
    Good luck & happy computing!

  • HT204074 How do I use 2 apple id's on one mac?  I have my apple id on my mac and would like to use the same mac for my wife's phone and ipad?

    How do I use 2 apple id's on one mac?  I have my apple id on my mac and would like to use the same mac for my wife's phone and ipad?

    Correction, thats two itune id's

  • I have an external hard drive that was formatted by a PC and has files and directories etc. I want to format it and use it on my IMAC for backup but I can't seem to write to it nor can I delete current content. How do I initialize it for use with the MAC?

    I have an external hard drive that was formatted by a PC and has files and directories copied to it etc. I want to use it on my IMAC for backup. I see it on my my IMAC . I can open files etc.  But I can't seem to write to it nor can I delete current content. I don't care if I lose current content. How do I initialize it for use with the MAC?

    You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
    http://www.macupdate.com/app/mac/24481/ntfs-3g
    If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

  • Using the New Mac Pro (can) - AE will not let me use Race Traced 3-D

    Using the New Mac Pro (can) - AE will not let me use Race Traced 3-D
    Hi, I'm using the new Mac Pro
    2.7 GHz 12-core Intel Xeon E5
    64 GB 1867 MHz DDR3
    AMD FirePro D700 6144 MB
    OSX 10.9.2
    I'm using After Effects 12.2.1.5
    When I attempt to invoke the race trace 3D renderer in a comp, I get this error
    "After Effects Error: Ray-traced 3D: Out of paged mapped memory for ray tracer. Your project may exceed GPU limits. Try closing other applications. Try updating the CUDA driver. (5070::2)"
    My preferences are set to use the CPU for Raytraced 3D since I do not have an Nvidia card.
    So, obviously there is an issue here in that it thinks I have an Nvidia card.
    I know (or assume I know) the cause for this is that when I set up this machine, I used Apple's migration assistant to move most of my data over from the previous gen Mac Pro which DID have a CUDA card.
    So my question is, what files can I delete/reset to cause After Effects to no longer look for CUDA files that do not exist on this machine?
    I do not have the CUDA control panel in System Prefs, so THAT did not carry over.
    Any ideas would be appreciated, thanks!

    > I know (or assume I know) the cause for this is that when I set up this machine, I used Apple's migration assistant to move most of my data over from the previous gen Mac Pro which DID have a CUDA card.
    Ugh. That causes so many problems.
    The first thing to try is deleting the CUDA frameworks from your Mac: Look in /Library/Frameworks for the CUDA.Framework and get rid of it.

  • How can i use my ipod mac address to find it?

    simply put, i left my ipod at work. they missplaced it, now i need to locate it... p.s. its only a 3rd gen 32 gig so its not ios 7 campatible ,icloud only works if you have the device and download cloud on to it(and icloud is turned on).....not looking for opinions just looking for options such as: how can i use my ipod mac address to find it?       i do have the mac address

    You cannot.
    If you did not set up find my pod on the iPod itself, then it cannot be tracked.
    Sorry

  • Iv bought a touchpad app for my iPhone 5 to use on my Mac mini, all the functions work accept the zoom one, how can I fix this problem

    Iv bought a touchpad app for my iPhone 5 to use on my Mac mini, all the functions work apart from the zoom one. How can I fix this please

    Iv bought a touchpad app for my iPhone 5 to use on my Mac mini,''
    Considering the app for the iPhone is for iOS, you may have problems using it on the Mac (Mac OS X)
    Two different operating sysems.
    From iTunes for the touchpad app:
    Requirements: Compatible with iPhone, iPod touch, and iPad. Requires iOS 5.1 or later. This app is optimized for iPhone 5.
    From here >  https://itunes.apple.com/us/app/touchpad/id297623931?mt=8

  • How to use iPhoto on Mac and iOS in conjunction

    I'm using iPhoto on both my Mac, iPhone and iPad. After the new Photo Stream and the new iPhoto iOS app has been released I think it is all started to get a little confusing. Here is some of my thoughts.
    1) When I delete a photo from my Photo Stream the photo gets deleted on all my devices. Nice. On my Mac, iPhoto is for instance creating a "mar. 2012 Photo Stream" event, where all photos from the Photo Stream is keept -- also the deleted once. That's OK. On my Mac I can cleanup these events by deleting the unwanted photos. All my photos are synced to iPad but it seems, that I cannot cleanup these events on iPhoto on my iPad. Is that right? I'm able to "hide" the photos from the events, but that does not delete them -- and they are still visible on my Mac after their are synced.
    2) I have an "Apple iPad Camera Connection Kit" making me able to import photos from my camera to my iPad, which I do daily when I'm on vacation. I thought that I could just import the photos to my iPad, put them in an event/album, edit/retouch them -- and when my iPad gets near my Mac the events/albums gets synced to my iPhoto on my Mac (without having to import them to the Mac manually). But it seems that the Camera app on my iPad is just putting the imported Photos in the "Last Import" album. How is Apple thinking we should do this? I cannot find a way to move them to an Event.
    3) Generally, the difference between Albums and Events in iPhoto iOS seems unclear. After the new iPhoto for iOS was released, I was hoping that I could edit, retouch and choose the best photos from an Events and put them in an Album. I can create a Journal with these photos but that is not always what I want. For instance if I would like to make a slideshow for my TV, it would be nice to have a clean album where only the best photos from an event. How is Apple thinking this should be done?
    Please tell me how you are using iPhoto on Mac and iOS. For me it does not work perfectly.

    Not only do they not work perfectly, they do not work together at all. Pretty much the only thing they share is a name. They are quite independent apps. Editing history on one can not be carried over to the other, so you can't start working on shots on one device and continue on the other. Events, Albums etc have no relation with each other and so on. Perhaps the next version of iPhoto (for either OS) will move them closer together but at this time they have no relationship at all.
    Regards
    TD

  • Want to use Outlook for Mac 2011

    Hello!
    I want to use Outlook for Mac 2011 for my calendar, email, and contacts on my Macbook Air, iPhone 6, and iPad Air.  Is this possible to sync with all these devices with this program?  I am more organized with Outlook than using the different Apple programs.  It has more options. 
    Any help would be appreciated.
    Thank you in advance.

    If you have outlook on all 3 devices, should be okay. However, I am suggesting you to probably try the Apple's and get used to it as you are using all notebook, phoneme and tab with Apple. Might save you some money with that.

  • How can I get on the internet with my newly purchased used G5 Power Mac if my ethernet port failed?

    We just bought our son a used G5 Power Mac, but when we got it home and tried to hook it up to the internet, no luck. We changed ethernet calbes, tried plugging directly into wall cable (by-passing router), even tried to do manual config, but no luck. I took it to the Genius Bar today and they said the ethernet plug was broken, and they did not have anything for a "vintage" machine like this.
    The Genius Bar tech told me to buy a USB Network Adaptor, however no one (Best Buy, Radio Shack, even searched the internet) seems to have them for Mac. What can I do to get this puppy connected to the internet and how much would it cost? Did we get screwed?
    Here is the seriel # + info that the seller gave us:
    Seriel # G8******QPM
    Mac OS X 10.5.8 (9L31a)
    < S/N Edited By Host >
    The Powermac G5 Dual Core 2.3 is powered by a "dual core" 2 GHz PowerPC 970MP (G5) processor with dual optimized AltiVec "Velocity Engine" vector processing units (one per core), four double-precision FPUs (two per core) and a 1 GHz frontside system bus. It 's configured with 4 GB of DDR SDRAM, a 160 GB (7200 RPM) Serial ATA hard drive, a 16X dual-layer "SuperDrive"
    Connectivity includes USB 2.0, FireWire "400" and "800", Two DVI port, optical digital audio in/out, two independent Gigabit Ethernet ports. All of the "multiple core" equipped Power Macintosh G5 models have three open PCI-Express (PCIe) expansion slots. The Power Macintosh G5 Dual Core 2ghs uses an easy-to-upgrade "anodized aluminum alloy" case with a removable side panel for easy access to internal components. Likewise, it is divided into four different thermal zones with nine computer-controlled fans for optimum cooling. 

    Sorry, the 2ndlink should be...
    http://eshop.macsales.com/item/NewerTech/MXP2802NU2C/
    Fully Mac OS X supported with with on-screen
    menu set-up and full user manual.                   
    http://eshop.macsales.com/item/Asus/USBN10/
    OS Support Mac 10.4/10.5/10.6
    I don't have those exact models, but have seen others here use them.

  • How to backup files to ensure future access and use using a different mac

    I recently attempted access backed up data on my LaCie drive from a different Mac notebook. I was blocked. I didn't write down the message, but it essentially advised that the data was locked and I wasn't allowed access. I wasn't given a chance to enter any kind of system password to bypass the lock.
    Here is my problem: I recently spilled some wine into my keyboard. Since then, the system has slowed to a crawl and occasionally weird things begin to happen, regardless of which software I am using [eg iPhoto, Quickbooks, idvd, Photoshop, email, and even dashboard]. I know I am very lucky to have any access to my files at all. While I do, I need to back everything up so that I can have access to my files later on. I plan to have my Mac serviced this week. I don't know if it needs to be replaced, or whether it can be repaired.
    *+If it can't be repaired, how do I back up my files to ensure future access and use using a different mac?+*

    I'll check the example you linked. I appreciate you responding.
    I was not trying to boot another system at all. Actually, I was working on a newer mac laptop. I attempted to load a dvd I had created in my idvd on the other mac from the LaCie. I was using a mac because I knew it had all the iLife software I needed in order to work with my idvd components. Honestly though, I don't know if the mac I was using is intel based. I hadn't considered it. Does Apple sell macbooks with intel? No matter.
    So, let's see -- I was using the other powerbook to read the LaCie via firewire -- and yes, the LaCie has its own power supply.
    If I remember correctly, the denial I received [when attempting to load the idvd file] knew that I had created it. I got the feeling that it wasn't allowing me into the file for security reasons. I just don't remember setting security. Incidentally, I just checked and I do not have a master password set nor do I have FileVault protection turned on.
    I'll check that link you sent. Thx again, M~

Maybe you are looking for

  • Project of Jini Implementation in China.

    Hi, everyone! Let me introduce myself, first. I am now a student studying at Beijing University of Post and Telecommunication(BUPT), Beijing, Capital of China. Then give a brief introduction of the project I am now participate in. Recently our projec

  • Apple Keyboard with number pad the V key will not work

    Apple Keyboard with number pad the V key will not work.  Everyother key works but not the V.  I have a MacBook Pro.  Any suggestions?

  • How to create a new service with HD TS and MHP in IRT MHP-RI?

    In IRT Reference Implementation, if I have a ts in harddisk and a xlet, and I want to bind them together. Can anyone tell me how to achieve this goal? I know I should use AIT generator but I don't know where to put the resulted .ait file. The TS is a

  • Whom do the source codes belong to?

    Hi All, This is with respect to the modification / developments made for my company by the SAP Partners i.e. the source codes. After the implementation and stabilization, whom do the SOURCE CODES belong? Aren't the SAP partners who hv developed the c

  • Preview differences

    I'm having real issues with Dreamweaver CS3 and previewing the work in Safari and Firefox. I'm doing it all in tables because it's going to be used as an email, and everything looks fine in Dreamweaver. But when I preview the page in Safari and Firef