FOC Item Excluding from Billing

Hi Sap Gurus,
Could any one help me out in this issue,
We have FOC(Free of Charge) items in sales order. When we go for Billing its stating that Item category FOC cannot be invoiced with IG2 Billing type. Since we have more than one item in sales order it invoices other items which are not FOC and the status of the sales order will be partially billed. We want the sales order to be fully invoiced.
How to resolve this Issue
Cheers
Edie
Edited by: Edie Edie on Oct 20, 2008 9:30 AM

Dear Edie,
If you marked the FOC as not relevant for billing I think that item will not come in to the billing document.
If you want those items in the billing then you try with this
Maintain the R100- 100% discount condition type in your FOC pricing procedure then maintain the condition record for that here system will transfer the values to the accounting with out error and invoice value for that item will be zero.
I hope this will help you,
Regards,
Murali.

Similar Messages

FOC items received from vendor...

Hi Experts,
I have a FOC item which receive from vendor. Which module i should use for good receipt? Goods Receipt PO or Goods Receipt?
Thanks.
Regards,
Danny

Hi Danny,
Use Goods Receipt PO Document in Purchase Module.
In Goods Receipt PO Document Unit Price is entered as Zero.
*Close the thread if issue solved.
Regards
Jambulingam.P

COPA : Drive Item Category from billing doc. / without sales order

Dear All ,
I need to drive item category directly from billing document ( billing without sales order - POS inbound doc. )
i tried to drive it from table VBRP but the derivation failed as table VBRP need the billing doc. number & i can't get it from COPA
POS does not create any sales order , the in coming inbound doc. create billing directly ( billing type : FP ).
Edited by: Ahmed Hassan on May 25, 2011 2:28 PM

Hi Jat
This is not the screen I am looking for .Please go to condition tab and look for Analysis .Let me know on what excess you are looking system to find your pricing .
Below are are reference for u.
Regards

Line Item Text ( Accounting Doc ) From Billing

Hi Experts,
As i know in Standard process, the Line item text FI Doc ( Accounting Document ) from billing doesn't have any value ( please correct me if i am wrong ).
But in my case there is value in line item text ( billing doc no )
i already check and not found any substistution or userexit, i try to search in customizing but dont have any clue where this text from. please advice where do i have to look.
Thanks,
Ricko

Hello Burak,
Thanks for reply, as i told in the message
right now, there is value in my line item text
it should be blank, but i couldnt find any customizing or anything that cause my line item text filled with billing document number. do you have any idea ?
Thanks,
RIcko
Edited by: Chapii on Mar 19, 2010 5:24 AM

Enhancement - Accounting Document from Billing Document - change line items

Hi Experts,
       Our client has a requirement to display all line items(as shown in Billing document) along with the tax line in the Accounting document. I can explain it as below:
      In VF01 transaction code: enter the delivery number.
      Press enter to see the number of line items that will be populated in the Billing document.
      Click on save.
      Here in the Accounting Doc you'll find only 2 line items, one line item is the consolidation of WRBTR and quatity of all the line items in the Billing Document and the other line item is the tax.
      We are required to replace the consolidated line item in the Account Doc with all the actual lines as populated in the Billing Document.
      For this we tried various methods:
             Searched for a BAPI - couldnt find any which will help in modifying the line items before creation of Account Doc
             Checked UserExits - Found one SDVFX008 but it didnt have the table which is sent for population of Accounting doc hence there was no way we could modify any table to get the desired output.
             Searched the VF01 Flow in Debugger to check when the Accounting Doc is updated, but it also didnt yield any fruits.
      Kindly please guide on a way this can be accomplished. Appreciate the help from you all...

Hi
I think that your requirement is related with summarization of items in the FI doc for the billing document. Please, see SAP Note 36353 - AC interface: Summarizing FI documents. See also Note 301077 - User exits for the interface to accounting.
I hope this helps you
Regards
Eduardo

FOC items with bill rate as "0" are not appearing in project invoice

Customer has a unique requirement of billing resources working on the project for free due to business reasons.
The issue is that the FOC items with bill rate as "0" are not appearing when the invoice is generated.
Please let me know if any one has come across this kind of a requirement and please share if you have any workaround.

Hi
You may try setting the bill rate for those cases as 0.01.
That way the items will be included in the invoice, but not affect dramatically the amount billed to customer.
Dina

Exclude a General Item Category from rebate processing

Is it possible to exclude a General Item Cateogory from rebate processing?
We have a "non-stock" item category that we want to set as "non relevant" for rebate processing, but I don't know where/how in configuration to do this.....Can anyone tell me if this is possible, and if so what do I do to make this exclusion.

The other option would be for that item category in VOV7, dont maintain any value against the field "Pricing".
G. Lakshmipathi

Free of Charge (FOC) items Should not be posted to Cost of sales

Hi all,
We are in ECC 6.
SD Requirement: In sales order, we create line items. Once DO is created , we post PGI. At this point
Cr Stock A/C 19000 Dr Cost of sales 45000. We do not Dr GL 45000 for FOC items. We want to use another GL for this.
How can I set up this?
Thanks in advance

Hi all, Tks for the solution. Issue is resolved now.
I have done following config to get the desired outcome.
Config Steps:
MM Config:
1.New mvt type 901 created by copying std mvt 601.
2.In account grouping account modifier VAX was replaced by ZAX for WA01 -2 -GBB & WA03 -2 -GBB
3.In OBYC Copy GBB-0001-VAX 3100 Old GL to GBB-0001-ZAX 3100 NewGL
SD Config
4.In VOV6 Maintain Sch line cat. Cretate Z2 by Copying CN   and change mvt type from 601 to 901
No separate item cat or delivery type is created .
Transaction Steps:
1. VA01:Create Sales order with Two line items one with item cat TAN and second with item cat TANN.
   For line item 2, Change Sch line cat to Z2
2. VL01N :Create delivery with std type LF > TO>Confirm-->PGI.
     Accounting entries, for first line item       Cr: Stock A/C Dr: cost of sales
                                     for second line item Cr: Stock A/c Dr: New GL
3.VF01: Billing doc created. Accounting entries Dr Trade Debtors Cr Sales Revenue

Down payment request from billing

Hello
Can somebody answer what are
Down payment request from billing
Down payment settlements from AR
Billing value from AR (down payments excluded)
Where I can find these values for a particular Sales order (transactions , tables, etc)
Thanks

Hi,
Coming to your first question:Down payment request from billing
In general,we are going to create this down payment request for prepaid sales orders only.
Goto T.Code:VA02,Enter the order number.
Goto item details-->Billing plan.
Here you can maintain the necessity values for your down payment like the billing documnet type and down payment % value etc,...
While creating the down payment,there should be a block for final invoice.
This is down payment request from order.
2.Down payment settlements from AR .
For this down payment invoices the special G/L indicator will be defaulted as F.We have to pay that amount through F-28 T.Code.
While maintaining the values for this downpayment in F-28,don't forget to maintain the special G/L indicator as F and remove the tick mark for Normal O/Is
You can pay the necessity amount and the remaining amount has to be maintained in difference postings such that the not assigned value should be 0.00.After paying this amount the indicator will be turned to "A".You can check it in FB03 T.Code and change the layout in this transaction and include the field special G/L indicator.
3.Billing value from AR (down payments excluded)
This means that if the downpayment % is 0 then it is nothing but the final invoice amount.In this case it comes into picture.
It is equivalent to order and final invoice.And down payment is dummy here.
T.Code:VA02
Enter teh order number.Click on document flow.
You can find the downpayment and final invoice numbers.Make a note of them.
VBFA is tha table where you can find the subsequent documents.
FBL5N is the T.Code where you can find the cleared and open items for your customers.
All your cleared downpayments will be appeared here along with the clearing document number.
BSAD and BSID are the tables.
FB02/FB03 are the T.Codes for checking accounting document entries.
Regards,
Krishna.

Item number in billing document not matching with delivery document-reg

Hi All,
In the billing document the item number is coming from Shipment document. ie., there are three deliveries in a shipment. Each delivery has got one line item, ie., 10. These three deliveries are assigned to a shipment, the order in which the deliveries are attached if we take as 10 for first delivery, 20 for th esecond and 30 for the third, In billing document the billing from first delivery is getting the item number as 10, the second delivery's billing document is getting the item number as 20 and the third as 30.
Can someone please reply where and how this is configured?
Thanks and regards,
Tajudeen S.

Hi,
first look at IMG/Sales and Distribution/ Billing / Maintain Copying Control For Billing Documents / Copying control: Delivery document to billing document
There is a field "Copy item number from reference"
Maybe it helps.
regards
Wojciech

How to Fetch Sales Order Item Quantity from Customer table(ztable)?

Dear Guru's,
My scenario:
While creating Sales order the item quantity should be fetched from a Ztable. So iam using the Userexit "V46H0001 - - Customer functions for resource-related billing", in that i have implemented my code in the Function Exit - EXIT_SAPLV46H_001 and the FM documentation says
This function module allows you to change item information for generating a new item.
In order to achieve this, you must change the relevant field in the structure C_VBAPKOM.
So i activated that exit and wrote the following code to test it as follows;
break-point.
C_VBAPKOM-zmeng = 10.
But it seems not working, even it doesn't stop at the break-point when i type the material number for the item in the sales order and press enter...
Please guide me in this regard, am i correct in choosing the User-Exit? what else have to be done in order to fetch the item quantity from the ztable....
Please suggest if there is some other way to do this, i also heard that we can do this through Routines...
Thanks in Advance...
Regards
Karthik D

I have solved this and you can found how i solved in the last reply of the following thread....
[SD UserExit - V46H0001 - Customer functions for resource-related billing|SD UserExit - V46H0001 - Customer functions for resource-related billing]
Thanks
Karthik D

Sales invoice carrection & item deletion from sales order after PGI

Hello Sir ,
               i want to change the item price after billing , account document is created .
               what can i do for it ?
              and second is . i want to delete line item from sales order after PGI
              like after delivery customer want to change the goods .
              please ans me asap
Thanks
Arvind
Edited by: saparvind on Nov 5, 2009 5:30 PM

Hi ,
i want to change the item price after billing , account document is created .
what can i do for it ?
Once the Billing document and corresponding Accounting document created, then you have to cancel the BILLING DOCUMENT to change the Price.
To change the Price , If it is Manual price directly you can change in the Billing document.
If the Price is coming from the CONDITION RECORDS then you have to UPDATE the pricing to the CARRY OUT NEW PRICING in the Billing documents, with Option B
i want to delete line item from sales order after PGI
like after delivery customer want to change the goods .
For this you have to reverse the PGI in the Transaction code VL09 and then cancel the DELIVERY in VL02N---Delete.
Now you can change the Goods in the Sales document in VA02.
Please check the above and revert.
thanks,
santosh

How user can get a Sales Text for the any Line Item in the Billing?

Salute Masters ! !
How user can get a Sales Text for the any Line Item in the Billing?
It's coming for other Order (Line Item for Bought out Item at Project Site - Some Item they procure at project site & complete the task).
Where I can configure in system for all.
Rgds
Srivastav
09973504950

Hi,
Sales text can be copied from customer to order , order to delivery and delivery to billing .
Check the T-code : VOTXN , do the customization as per your requirement.
check the below link :
http://help.sap.com/saphelp_erp60_sp/helpdata/en/dd/55f993545a11d1a7020000e829fd11/content.htm

Transfer document header text from billing document to FI document

Dear all,
Where do I specify that the document header text out of the billing document should be transferred to the corresponding FI document?
Currently, the FI document header text (BKPF-BKTXT) remeans blank after transfer from billing document. We need this field to be filled in, but I haven't found how to have this filled in.
In copy control from sales doc to billing doc, there is the possibility to transfer the Reference number & Assignment, but nothing about document header texts.
Some say that it would only be possible via coding, but anybody has any idea if it might be possible via standard SAP?
Many thanks!
Best regards

Hi,
We also had a bit same requirement, which is to copy the billing header text to FI item text (BSEG-SGTXT). The solution we took is to use FI Substitution (t-code GGB1), so that every time a FI document created from SD... the substitution reads the billing header text and put it in the FI item text. I think the same method could be used for FI header text (BKPF-BKTXT). Below is the solution for your reference.
Prerequisite:
Document Type = 'RV' AND Reference <> '' AND
( Transaction code = 'VF01' OR Transaction code = 'VF02' OR
Transaction code = 'VF03' )
Substitution:
Using exit which coding is as below.
*&      Form u900
      Copy Billing Header Text to SGTXT
     -->P_SGTXT    FI Item Text
FORM u900 USING p_sgtxt TYPE bseg-sgtxt.
DATA: lv_name TYPE thead-tdname,
        lt_line TYPE STANDARD TABLE OF tline,
        lw_line TYPE tline.
lv_name = bkpf-xblnr.
CALL FUNCTION 'READ_TEXT'
    EXPORTING
      id                      = 'Z001'
      language                = sy-langu
      name                    = lv_name
      object                  = 'VBBK'
    TABLES
      lines                   = lt_line[]
    EXCEPTIONS
      id                      = 1
      language                = 2
      name                    = 3
      not_found               = 4
      object                  = 5
      reference_check         = 6
      wrong_access_to_archive = 7
      OTHERS                  = 8.
IF sy-subrc EQ 0.
    READ TABLE lt_line
      INTO lw_line
      INDEX 1.
In Billing Header Text, the sign '&' (ampersand) is automatically
added some characters so it becomes '<(>&<)>'.
The logic below is to fix that issue.
    REPLACE ALL OCCURRENCES OF '<(>' IN lw_line-tdline WITH space.
    REPLACE ALL OCCURRENCES OF '<)>' IN lw_line-tdline WITH space.
    p_sgtxt = lw_line-tdline.
ENDIF.
ENDFORM.
Regards,
Teddy Kurniawan

3rd party SO with rejected item appears in billing due list ( VF04 )

Hi
There are 7 items in a SO ( 3RD PARTY PROCESS ) . One of the items ( POSNR 030 ) is rejected ( reason for rejection is applied at the item level ). The item is rejected from the linked Pur Req & PO as well. For this rejected item there is no GR doc
The balance items on the SO are invoiced.
Problem : This SO still appears appears in the billing due list.
Expectation : This SO should not appear in VF04
Other details : Item cat TAS billing Rel B. Billing qty VTFA is E & the update doc flow is checked
Things tried :
1) In debug mode changed the overall billing status in VBUP & VBUK to C
2) In SA38 executed reorganisation of index prog ( RVVI50 - -- ), SDVBUK00.
Pl. help

Hi
I have done the things suggested by Caprin + Sanjeev Kumar. No help
Here is additional info. . As i am working on this issue i could replicate it in the quality server . I have found out how the issue was caused.
There is a inconsistency between PO delivery date & SO req delivery date. In 3rd party orders the Sch line date is derivied from Vendor info records. The user created SO & PO .The SO got its Sch line date from info record. Then the user manually changed the Requested del date on the SO beyond the sch line date derived from the info record & at the same time leaving the Del date on PO untouched. This has resulted in mismatch between the PO & SO at the same time weird looking sch lines on SO ( the order + rounded qty is on the later date whereas the confirmed qty on the 1st sch line ).
I feel if somebody can suggesta program to bring in sync the VBAP + VBEP + PO line item tables i think it will solve the issue

FOC Item Excluding from Billing

Similar Messages

Maybe you are looking for