Focus on and out of JTabel

I am using a JTabel and this is my First Screen of Project
when the user whats to select a row from tabel with key board he is not able to select because their is no focus on tabel rows by default.
secondly when it gets a focus by using tab key , then it keeps the focus in the tabel only
my Q is how to give focus to Jtabel and how to remove focus from Jtabel

No change.  You will be given the same model/capacity as the original.

Similar Messages

  • Final output of Final Cut Express HD 3.5 is blurry and out of focus.

    Using clear/sharp '.mov' files as clips. Doing simple editing, nothing fancy. When I finally output the project using 'Export/Using QuickTime Conversion,' the final is blurry and out of focus. I've tried every compression type (H264, Animation, etc.). Same problem. Anyone know why this is happening?
    Although the specs for my computer are well within the Final Cut Express guidelines (I've even upgraded my graphics card to a Radeon 9800 Pro 256 MB), I'm still thinking that perhaps the G4 I'm using doesn't have enough juice to run the FCE software. By the way, I don't have any other programs active when using FCE. Any help on this would be greatly appreciated. Thanks.
    G4 (Mirror Drive Doors)/1.25 GHz/2.0 GB Memory/Radeon 9800XT (256 MB) Mac OS X (10.4.9) 2 Internal 120 GB Hard Drives (RAID)/2 CD-DVD Drives: Super Drive & Combo Drive
    G4 (Mirror Drive Doors)/1.25 GHz/2.0 GB Memory/Radeon 9800XT (256 MB)   Mac OS X (10.4.9)   2 Internal 120 GB Hard Drives (RAID)/2 CD-DVD Drives: Super Drive & Combo Drive

    Thanks for your response.
    Here's what I'm (trying) to do:
    I'm creating short 5 minute tutorial movies that will be distributed as QuickTime movies (burned to disk) for short run distribution (college).
    Here's the process: the movie itself is a recording of monitor screen actions recorded (audio and video) using Snapz Pro movie mode. The recorded size is 800 x 600. There might be 5 such 1 or 2 minute clips. The quality is excellent. I bring them in to FCE, drop all the clips on the same track, and add simple transitions. That's it.
    Now I need to somehow get a final QuickTime movie, with close to the same quality I had in the clips.
    So... I take the FCE file, output it using 'Export>QuickTime Conversion,' using the same size I originally recorded in, 800 x 600. Tried every codec available. Every time, the end result is a very blurred version of the original Snapz Pro recordings.
    I've even tried outputting the FCE file as 'Export>QuickTime Move' (not using the conversion method). Opened that up in QuickTime Pro with the same result: blurred and out of focus.
    I'm viewing the exported file in QuickTime Pro, with the 'Movie Properties' setting of 'High Quality.'
    Any clue? This is driving me crazy. But I'm determined to get this right.
    G4 (Mirror Drive Doors)/1.25 GHz/2.0 GB Memory/Radeon 9800XT (256 MB) Mac OS X (10.4.9) 2 Internal 120 GB Hard Drives (RAID)/2 CD-DVD Drives: Super Drive & Combo Drive

  • 21.5 Imac screen is blurry and out of focus

    I have a Imac 21.5 3.06 ghz intel core i3 which I got about a week ago and I just noticed that the monitor is going out of focus more and more. I have a second monitor hooked up and the images look fine on it and the resolution on both are almost the same I checked universal for zoom and it is off. This is becoming a real issue as I edit photos for clients on this system. What do I need to do to fix this issue.

    OK, well that' really strange because that is the correct resolution (native resolution) to be running.
    LCD monitors can't go out of focus if they are running at native resolution from a digital input. It's really hard to say what you are dealing with without actually seeing the display, which obviously can't be done from within a forum. You may need to take it to an Apple Store and compare it to others on the floor.

  • IMac Display stretched and out of focus

    My iMac display is not right. It is slightly enlarged and out of focus. I have already tried the display settings and holding the control key and scrolling down. I also tried restarting. Nothing is working. Last night I tried configuring my router for wireless. I supposedly made it secure with a password, which I had to use to connect to my network. The screen thing happened after that. This morning I checked the connection again and the little lock icon was no longer there. Could the two be related? Please help! I am obviously not very apt with computers, but I'm trying.

    This resolved my issues:
    Preferrences >  Accessibility > Zoom 
    then, uncheck Zoom and uncheck Zoom follows keboard focus. 
    Wait a few minutes.  You can rechec them again but it won't go back to the stretched and out of focus look.  I don't know why.

  • Why is text become blurry and out of focus?

    Why is text become blurry and out of focus?

    I am confused what device you are talking about. You question is here in the Using iPhone section, but it is marked for your MacBook Pro running iOS 6? If you are talking about an iPhone and you never update your profile to say you are running iOS 7, I would blame the paralax feature that slightly zooms into your picture, making certain low-res photos look extra blurry. Hope this helps.

  • Display suddenly changed I have tried changing in utilities but nothing works.  The print is enormous and out of focus the screen has shrunk in width but programs open too stretched in length? What can I do?

    The display suddently changed two days ago.  Everthing exploded in size.  I have tried changing the contrast but nothing works.  The display screen becomes either too wide, too long, or too narrow and in all cases the font is extra large and out of focus.  What can I do please   I am really disappointed since my iMac is only 2.5 months old.

    Don't think so.  But tried it anyway.  I have been into utilities and tried different contrast settings now I don't know what is the right one.  But no matter which one I tried I have either about a third of the screen black, with display centered as though hidden behind the black.  What is going on?
    Also, I have to say that I can't understand why there is no information anywhere on what the correct settings should be.
    Any ideas Capt?

  • TS4436 hi, when zooming in to capture still images, the image is really blurred and out of focus. is this a hardware issue and is there any solution for this?? or is my device faulty?

    hi, when zooming in to capture still images, the image is really blurred and out of focus. is this a hardware issue and is there any solution for this?? or is my device faulty?

    If you are using the iPhone camera zoom then remember that this is a digital zoom not an optical zoom. The zoomed in area will have fewer pixels and not appear as clear. The more you zoom the worse it gets. It's like cropping a picture after it has been taken.

  • The photos imported are zooming in and out and are out and in focus-how to resolve this?

    Hi all,
    I just started creating a short film which will consist of photos and voice over. After importing the photos, each of them is being zoomed in and out and is once slightly blurry and once in focus- none of the effects are on and I am a bit stuck. Does anyone know how to get rid of this?
    Any help would be appreciated.
    Thanks!

    The effect you are seeing is known as the Ken Burns effect, which shows panning and zooming on the images. This is iMovie's default setting for still photos. To change this setting, go to iMovie's Menu and select File>Project Properties. In the window that opens, for the item "Initial Photo Placement" choose Fit in Frame (click on the disclosure arrows). The other options are Crop and Ken Burns. You will need to do this for each Project that you start - change the setting before dragging photos to the Project.
    For your current project you will also need to change the setting for each image already inserted, given that they have already been included in the project. To do this on an image, there are several options. One way is to click on the image (clip) then press the C key on the keyboard. In the viewer you will see selections for Fit, Crop and Ken Burns - select Fit, then click on Done. Now the photo will remain stationary, with no pan or zoom.
    Another method is to click on the small gear icon at the left corner of the clip, then select Cropping, Ken Burns and Rotation from the pop-up menu. Again, the various selections will appear in the Viewer. Also, you can click on the Crop tool in the centre toolbar (directly to the right of the microphone icon).
    To change the setting for a number of photos (rather than doing them individually), select them by clicking on the first photo then clicking on the last one while holding down the Shift key - that's assuming they are all grouped together (contiguous). If not grouped, then click on each one while holding down the Command key. Once all clips have been selected (highlighted with a yellow border), you can make your selections as to Fit, Crop and Ken Burns, as described earlier. All highlighted photos will then have their setting changed. Don't forget to click on Done after changing the setting!
    John

  • Every video produced by Premier Elements 11 is blury and out of focus.

    When I try to create a video with Premier Elements 11 and an MTS file from my video camera, the resulting videos are blurred and out of focus. The MTS is clear and looks good. Plays on any supported video player. Have tried to convert to AVI as well as creating DVD with the same results. This is the case with any input file, not only one. How can I get a focused, clear video?

    scarboro98
    The answers are in the details.
    What computer operating system is your Premiere Elements 11 running on?
    What are the properties of these .mts source files
    Video compression
    Audio compression
    Frame size
    Frame rate
    Interlaced or Progressive
    File extension
    Pixel Aspect ratio
    What is the brand/model/setting of the camera recording the source media?
    What are you or the project setting as the project preset (which should match the properties of the source media)
    See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Size, Pixel Aspect Ratio (even if they appear to be grayed out)
    When you are viewing the Timeline content in the Edit area monitor is the playback blurry and out of focus?
    Or is the blurry and out of focus only in your exports? If only in exports, then we need to dig into your export choices in Publish+Share/.
    Is your computer optimized and is your video card/graphics card driver up to date according to the web site of the manufacturer of your video card?
    Let us start here and then decide what next.
    Any questions or need clarification on anything written, please do not hesitate to ask.
    Thank you.
    ATR

  • In and out of focus

    I downloaded from Canon HV30 (tape) to iMovie '09. Every 20 seconds or so the picture goes in and out of focus and then back to sharp again. It is a very "soft" focus change but annoying. This continues after editing and sharing to iDVD and burning.
    Could this be a problem with the camera tape not being tight, or could it be something in iMovie?

    Tape tension has nothing to do with it.
    This is a digital camera: if the tape lost tension you'd have no image at all, or a "mosaic" or "blocky" image because of missing chunks of data.
    The focus isn't related to the tape at all. It's like moments of blurry eyesight aren't caused by lack of grip on the floor of your shoes!
    It's the camera "hunting" for focus, as explained by AppleMan and Karsten. You may not see this on the camera's own built-in viewfinder monitor ..but that really is the cause.
    The tape's tension, or contact with the tape-head, is not it. If there were poor contact you'd have sporadic loss of both sound and picture ..but not a change of focus.

  • When using video camera on iPad 3 screen keeps going in and out of focus

    Every time I use my video camera the image goes in and out of focus making the blurry there seems to be no settings to stop this help.

    At this point, I would go for reset to its factory default condition, using the iTunes program to get a clean system install. That way you'll clean everything out and just have it set up the way it would come from the factory. You'll need to do your backup (on the iTunes program too) and be sure you understand which stuff will be saved and which will not (from the links below). Also turn off any anti-virus program you may have on your desktop. Then when you reset it to the factory default condition, don't restore your backup just yet ... until you check it out without your data put back on it. Verify its operation first, to make sure that you know it's okay. Hopefully everything is okay at that point, otherwise you'll have to take it into Apple to check it out for any hardware failure.
    Here are the links, and the last one pertains to the reset to factory default condition ...
    Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)https://support.apple.com/kb/HT5262
    Back up and Restore your iOS Device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    iTunes: About iOS Backups
    http://support.apple.com/kb/ht4946
    Create and Delete iPhone, iPad and iPod Touch Backups in iTunes
    http://support.apple.com/kb/ht4946
    iOS: Troubleshooting Encrypted Backups
    http://support.apple.com/kb/TS5162
    Use iTunes to Restore your iOS Device to Factory Settings
    http://support.apple.com/kb/ht1414

  • In and Out of focus video. Please help!!!

    I exported my fce movie to a quicktime movie (which looked fine on the computer) and then imported to idvd ( which stilled looked fine on my computer) and burned it to a dvd to play on TV and then the video goes in and out of focus when the Lacrosse players move. Why does this happen??

    Hi - my notes on this - might be of help
    *FCE/P to iDVD*
    Several things
    • How to go from FCE/P to iDVD
    • Free space on Start-up hard disk
    • Encoding
    • Brand and type of DVDs used
    • Burn speed set
    • iDVD BUG
    • Chapters
    *How to go from FCE/P to iDVD I do*
    • Disable Screen and Energy saver
    • IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mixdown
    • Save out as a QuickTime .mov file
    • Select with Mark - Chapter Mark
    • Not self-contained (not important but saves time and space)
    • NO QUICKTIME CONVERSION (IMPORTANT)
    *Free space on Start-up hard disk*
    I set a minimum of 25GB (for Mac OS and iDVDs temp files)
    Encoding
    • I use Pro Quality encoding
    *Brand and type of DVDs used*
    • I use Verbatim
    • I use DVD-R
    *Burn speed set*
    • I set down this to x4 (or x1)
    *iDVD BUG*
    • One can not go back to movie-project for any alterations and then go back to
    the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
    of them will work.
    Medicine - Start a brand new iDVD project.
    *Use of Chapters*
    • I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
    • NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it stlf
    • No Chapter marks in or within two seconds from a transition
    (Way around this last one - Export movie as QT full quality and NO Chapter marks
    Import this into a new Movie-project and now You are free to set C-Ms where You want
    them except at very beginning - still)
    *Material used to build movie*
    • video - I use streamingDV (or convert all other to this eg .mp4, .avi, .wmv etc)
    • audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
    • photos - I use .jpg - no .bmp etc
    Trash iDVD pref file and run Repair Permissions - and have a re-try.
    from post ??
    May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screensaving
    Yours Bengt W

  • Making keyframing as smooth as behaviors (ease in AND out)...

    I try time and time again to get keyframes to be as smooth as behaviors with "ease in and out." No matter how I do it, bezier, ease in, ease out... the keyframes always jerk in one direction or another. Is there a way to have keyframes exhibit this "ease in and out" behavior? When selecting the keyframes in keyframe editor, it only offers an ease IN or and ease OUT.

    I'm more focused on camera-moves (no pun intended). Dolly, sweep, these all have "ease both" options which feel VERY organic. Without them I think 3d comes off as "digital," so I prefer to always use ease-both.
    When I start key-framing for major complex moves, I have to bezier the **** out of X,Y AND Z moves. It gets really overwhelming. I just would like the option to select all and choose -ease-both-, rather than have to set each one.

  • Keeping track of focus gains and losses

    In my application, I have a text field that a user can type in an artist/title and search a music library for the query. This application is for a touchscreen so I've included a popup keyboard for the user since no keyboard will be available to use.
    The idea behind it is the user touches the text field and gives it focus. Once focus is given to the text box, ther user will then be able to touch/click a JButton that will pop up a keyboard panel. I would like to pass to the keyboard panel which text field last had focus so as they touch the on-screen keys, it will type text into the last focused text field.
    I read over the tutorial for using focus listeners and I understand how that works, but how can I go about getting the object that last had focus?
    I'm thinking along the lines of have a focus listener on the JButton that displays the keyboard:
    // This is called when the user touches the button to display the keyboard
    if (artistText.focusLost)
    keyboardFocus("artist");
    }Obviously the above code isn't valid, but it's how I'm trying to explain myself. keyboardFocus method will have code to setText() to the artistText text field. I can figure that one out.

    I was testing something before you replied and I was wondering if it would be practical.
    Here is the partial code on my GUI class:
    // Calls the keyboardFocus() method whenever focus is lost on the field
    // and passes the component name
        private void titleTextFocusLost (java.awt.event.FocusEvent evt)                                   
            keyboardFocus(titleText);
    // Takes the passed component and stores it in a public variable
        private void keyboardFocus (JTextField comp)
            lastFocus = comp;
    // Variable that stores that compoent that last had focus
        public static JTextField lastFocus;Here is a snippet from my Keyboard class:
    // Then the Q button is pressed, the letter Q is set as the text to the last
    // JTextField of focus
        private void qKeyActionPerformed (java.awt.event.ActionEvent evt)                                    
            GUI.lastFocus.setText ("Q");
        } If this isn't practical, I'd definate be willing to change it, but what do you think?

  • My focus lens fell out

    One of the focus lenes fell out. I googled it and this is not an isolated incident with the Canon 1D II. Should I send it in or is there a way to fix it myself?

    If this relates to a Canon 1D mark ll you should have posted in the EOS section but either way I need to know if you mean the focus screen. If you do that part is owner changable because Canon sells a few different styles of them. There is a small tab in the middle of the frame that screen fits in which if pulled about 1/16 inch releases the focus screen. Invert the camera & let the screen drop into place then pull the clip lightly with a fingernail & very gently push the screen back into place, then release the tab.
    Or do a YouTube search on how to change the screen in the 1 series bodies.
    "A skill is developed through constant practice with a passion to improve, not bought."

Maybe you are looking for