Focus points not showing for Nex 7 images in Aperture.

Whilst it's good that Aperture now supports my Nex 7, I've noticed that focus points don't show and the option in the metadata tab isn't even there with my Nex photos.  It's still available for other cameras though.  Anyone else with the same problem.  Or do I have to wait for another update.  Any comments welcome as it is a feature I use in post processing.
Thanks
John

If you have a tool that lets you look at the EXIF data in the image file you could check to see if this is in facr true.
The entries you are looking for are the ones that start with AF, there are a few such as AF points in focus and AF points selected. There is also two AF entries that have a series of x and y positions. Those are the auto focus points. If there in there then Aperture should be abel to display them.
The EXIF tool I use is Exiftool. It's command line so thakes some getting use to but it is definitly worth having on your system.
reegards

Similar Messages

  • Show focus points - not showing...

    I'm shooting with a 1D Mark III, and when I select "show focus points" not seeing the focus points...
    Is this supposed to actually show where my focus point was on the shot(s)
    That would be very helpful. What am I doing wrong?

    Allan Eckert wrote:
    I don't know what Kirby is talking about. He seems to be answering someone else's question.
    It reads pretty clearly to me.
    The camera has a sensor.  Additionally, it has an array of focus-sensors that are fixed in position relative to the main sensor.  Which of these focus-sensors was used by the auto-focus system to determine the focusing distance is what is displayed by the feature under discussion.
    The point I'm trying to make is that the "focus point" in the discussion refers to which exact focus-sensors in the camera were used to achieve auto-focus.  Unless your camera and your subject did not move between the time of focus-lock and the time of exposure, there will not be an exact correspondence between the spot on the sensor that is associated with that focus and what is depicted under that spot in the image. 
    In my practice, I find it much more awkward and time-consuming to select a focus point while the shot is framed than it is to focus with the central cross-type focus-sensors, lock focus, and then frame the exposure.  So for me -- and I think many others -- knowing which focus-sensor was used by the auto-focus system doesn't tell me anything:  there is no correspondence between the focus-sensor used and the image.
    In the linked blog post, the author shows an image with the selected focus-sensor super-imposed over the model's upper eyelid.  IME, it is assuming too much to assume that the autofocus system used that spot on the model's face when it determined the focusing distance.
    There are programs that will analyze the actual image and attempt to show what parts of the image are in sharpest focus.  Aperture does not do that.
    This is -- as I indicated -- tangent to the OP's question.  But the way s/he worded the question made me think that s/he things there is a certain one-to-one correspondence between the focusing-sensor used and the objects depicted under that focusing-sensor when it is superimposed over the image.  There is not.  I found that important to know, and so I pass it along.

  • Firefox not showing correct HP background image/video, but IE (all versions), Chrome and Safari are. How do I fix this ASAP?

    Website www.bludot.com is not showing the proper BG image/video on all browsers (Safari, Chrome and all IE versions) but not on Firefox. The code is right, but FF is still pulling old images. The correct image/HTML5 video should be a cake, as displayed on all other browsers.

    Firefox 9 is being withheld for Mac users due to unresolved crashing problems.
    A test case would be nice and the URL for the website in question, so someone here can experience that problem first hand.
    Or, try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
    http://forums.mozillazine.org/viewforum.php?f=25 <br />
    You'll need to register and login to be able to post in that forum.

  • 2013 Custom Web Parts in Page Layouts not showing for users

    Custom Web Parts in Page Layouts not showing for users
    I have created a master page in the root site collection for a subsite I am developing. I created content types and custom page layouts for the pages within the subsite.
    I used the snippet tool in the design manager to create web parts and page field markup which I copied into the custom layout HTML pages in the root site collection. For instance I have an image viewer web part that I place there to serve as a section title.
    The problem is that I can see all these customer layout page parts no problem but my users cannot. This leads me to believe its permissions, I am site owner of both the subsite and root site collection.
    The users that cannot see the web parts are site members of the site and restricted read users on the root site collection (where the layouts are stored).
    What gives I'm finding it hard to understand why a snipet generated web part wouldn't show in all pages created from that layout page.
    Any help would be appreciated, Havent found anything on this issue online. weird.

    It is a permission issue indeed. Fix is simple, make sure you check out the page layout page, then check it back in as published version.
    John Architect

  • Focus indicator not showing after keyboard interaction

    I have a legacy Win32 application written in C, which is giving me trouble with regard to the keyboard focus indicator. This behavior is not seen with a small MFC application. In particular, the keyboard focus is not shown for controls. This is most obvious
    with a combo box with the droplist style, but is true of all controls.
    I use the ComCtrl32v6 manifest to use modern controls.
    I know about the Control Panel setting which turns on accelerator key and keyboard focus once the user interacts with the application in a particular way. With that setting Off, my understanding is that keyboard focus indicators are not shown until the user
    tabs between controls. And in fact, that is what I see with a small MFC application. But with my full legacy application, even tabbing between controls does not cause the focus indicator to appear.
    I suspect there is some interaction with the message loop I am using (though I am essentially doing GetMessage()/TranslateMessage()/DispatchMessage()). I say this because of some of the other questions I have read on this forum having to do with focus indicators
    and TAB key. Though I am not mixing COM or .NET with my C application.
    Is there some Win32 function I can call that tells Windows, "This application is being controlled by the keyboard, please show the various visual indicators"? Or some message I can respond to? Or anything?
    Now for the really strange bit. This behavior depends on how I start the application! If I start the application with a mouse click (either double-clicking a desktop shortcut, or clicking the Go icon in Visual Studio, or clicking the OK button on the Start->Run
    dialog), then I don't get focus indicators. But if I start the application with keystrokes (typing into a command prompt, pressing F5 within Visual Studio, pressing Return from the Start->Run dialog), then the focus indicators show up just fine.
    Thoughts? Help?
    Thanks in advance.

    Is there some Win32 function I can call that tells Windows, "This application is being controlled by the keyboard, please show the various visual indicators"? Or some message I can respond to? Or anything?
    Have you try something like this? Handling WM_KEYDOWN message:
    case WM_KEYDOWN:
    if(pMsg->wParam== VK_TAB){
    SetFocus(hwndctrl);
    http://msdn.microsoft.com/en-us/library/windows/desktop/ms646312(v=vs.85).aspx
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • SharePoint 2010 List View Web Part not showing for read-only users?

    Hello all,
    I have List View Webparts on my Blank Web Part page, and it's not showing for Read-Only users.
    Is this intended by Microsoft or is it a bug?
    Thank you!

    Hi,
    According to your post, my understanding is that the read only user could not see the list view web part.
    Per my knowledge, the issue may be cause that the user do not have the proper permission for the list.
    1. Check whether the user can access the list.
    2. Check whether the user can view all the items instead of partial items in the list.
    3. Check whether there are some fields refer to other lists or terms, especially the lookup field or managed metadata filed.
         If that is the case, make sure the user can access the lookup list.
    Thanks,
    Jason
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jason Guo
    TechNet Community Support

  • Key focus is not visible for all objects when tabbing

    I'm using LabView 5.1.
    The key focus is not visible for all objects when tabbing through a "disabled and grayed-out" object.
    For example, let's say I create a panel with 3 buttons. If I create a "disabled" attribute for button 2 and assign the value "2" (disabled and grayed-out) to it. When I will run this VI, the key navigation will go through button 1 and button 3 (skipping button 2 as expected) but the key focus on button 3 will not be visible.
    Is this a bug with LabView or am I doing something wrong ?

    Hi Ben,
    Don't worry, time is not an issue... I'm posting an example of a VI with the problem I described. I noticed that the problem occurs only with "dialog buttons".
    When you have time, let me know if you see the same behavior. If you do, I will report the problem to National Instrument.
    Thanks for your time !
    BigBen
    Attachments:
    3buttons.vi ‏22 KB

  • Lead import - Primary contact point not found for sales lead contact

    Hi All, I am looking for a solutions, This is Leads import :
    Concurrent program:
    Import Sales Leads - Any clues ???
    Starting child process# 1
    Sales Lead Import Child #1 started at 26-Mar-2008 10:21:46
    Getting the saleasforce_id for the user ...
    Salesforce_id for the logged in user is : 100012066
    Processing import_interface_id: 14002
    budget: currency:USD
    Value of currency :USD
    Before calling custom hook for party match
    Returned from custom hook with party_id:
    Start DQM - TCA Processing
    Starting DQM - TCA time: 20080326102146
    #1 :: Calling FIND_PARTIES with OSR found = N
    rule_id 33
    After find_parties matches 0
    No party match found !
    Contact blind search begin: using FIND_PARTIES (Person)
    No person match found !
    DQM returned: YYYY-NNNN
    Call user_hook is false
    Creating location
    Location created: 7322
    Organization created: 173251
    Creating party site for Organization
    Creating PartySite for 173251:7322
    ORGANIZATION Party Site created: 120133
    Creating Party Site Use
    PS Use created: 124173
    Creating the Contact
    Contact created: 173252
    Creating Relationship
    subject_id 173252
    object_id 173251
    Creating OrgContact
    OrgContact created: 110104
    Party Relationship created: 110153:173253
    Creating party site for Relationship
    Creating PartySite for 173253:7322
    REL Party Site created: 120134
    Creating Party Site Use
    PS Use created: 124174
    Creating contact point (1)
    End DQM - TCA time: 20080326102147
    Start Create - Process Lead time: 20080326102147
    do_create_saleslead:Start
    Total Lead Lines: 0
    Primary contact point not found for sales lead contact
    create_sales_lead:Start
    The column(s), SOURCE NAME, must exist. The missing column is either required by the database or required based on the data that is being imported.
    do_create_saleslead failed
    Message Count:1
    Batch Size:1
    Number of Records Successfully Imported:0
    Number of Records with Errors:1
    Number of Records with unexpected Errors:0
    End Child Import Process time: 26-Mar-2008 10:21:47
    Message was edited by:
    J.Harsha

    Can you please tell us your EBS version? - 11.5.10.2Thanks - Nagamohan
    I had a SR: this is the solution
    Can you please check the profile value 'OS: Source Code Mandatory for Leads' on all levels ( Site, application, responsibiloty and User). If the profile is set to Yes, please set it to N

  • New features, e.g., blur path and select focus, are not showing up in my PS drop down menus

    Although I've downloaded the CC PS 2014 updates the new features, e.g., blur path and select focus, are not showing up in my PS drop down menus - anybody know why and what I need to do?
    <moved from downloading,installing,setting up - kglad>

    Are you sure you understand the Cloud License concept?
    You are entitled to keep Photoshop CC and install Photoshop CC 2014, so CC 2014 is not connected with additional costs and the time it takes to install the new version of Photoshop should not be that much of a imposition, should it?

  • Lightroom 5 is not showing previous sucessfuly imported images and images are not identified as missing, there are no images shown in the library, how do  I reconnect missing images?

    lightroom 5 is not showing previous successfully imported images and images are not identified as missing, there are no images shown in the library, how do  I reconnect missing images?

    If the images are not identified as missing ... then you can't reconnect them
    But I'm not really sure what is happening, as I don't understand your description of the problem, could you show us a screen capture? Or describe what appears on your screen in much more detail...

  • Time column duration not showing for my podcast

    the time column duration is not showing for my podcast shows on the iTunes Store: https://itunes.apple.com/us/podcast/income-press-podcast-blogging/id500448874
    For some odd reason it just stopped showing the duration.
    Any help or ideas would greatly be appreciated.
    Thanks,
    Joey

    Your feed is at http://feeds.feedburner.com/incomepresspodcast
    You have no 'itunes:duration' tags in the feed, which are necesssary for the duration to show in the Store and when subscribing, though in that case the duration will show once the show has downloaded as the iTunes application will detect it from the file itself. In order to show the duration in the Store you need to add this tag, though I can't advise on how to go about it in Wordpress.

  • My iphone problem is network bar not show for searching why how can resolved my iphone

    my iphone problem is network bar not show for searching why how can resolved my iphone
    my iphone model is MD239B/A
    my iphone serial no: DQ******TD2
    <Edited by Host>

    Hi mirza_ali,
    The article below may be able to help you with this issue.
    Click on the link below to see more details and screenshots. 
    iOS: Understanding cellular data networks
    iPhone: Wireless carrier support and features
    I hope this information helps ....
    Have a great day!
    - Judy

  • HT2534 The none option is not showing for indian itune store. So cant i create and itune account for just downloadning free app anymore without credit card information?

    The none option is not showing for indian itune store. So cant i create and itune account for just downloadning free app anymore without credit card information?

    HI..
    The None option is not available in all countries  
    iTunes Store: Which types of items can I buy in my country?

  • Show focus points not available

    My pictures used to all have the option of showing the focus points in Aperture. I would click on the icon for focus points to toggle it on and off.
    Starting last year the icon for the focus points is not even there under the Info tab (same camera and lenses). i just received a new camera body but same lenses.
    Pictures still do not have the icon for Focus Points. Going to the menu and choosing "show focus points" does no good because the icon is not there (but the icon for jpeg/raw, metering, and wb are there). if i go to some old pictures the icon is there for the old pictures.
    i re-downloaded the program, trashed the preference files, etc.
    Camera- Canon 40D, Canon 7D mii. Lenses CAnon 17-55 f/2.8 and Canon 70-200 f/4, non IS.
    Any help would be appreciated.
    Terry

    I just checked one of my photos in Aperture for you..... it is the only reason I've kept aperture to be honest! Mine still works on my raw photo which is from a 5dmiii. I'm in the process tho of moving all my photos to external hard drives and only keeping current photos on laptop due to storage issues. I'm also switching to Bridge, ACR and PSCC. But when I open projects from Aperture off of hard drive I get a message that says I need to upgrade library and opens in Aperture. I don't want to be bound to Aperture anymore. What if I don't have Aperture on next Mac? So not how do I get my photos unhostaged? Sorry about rant.... just very frustrated if I have to go through some long drawn out process to get this straightened out.

  • Alt text of image tooltip not showing for some cases

    Hello,
    I have followed the following steps in adding the alt text of images. Adobe Acrobat X Pro * Add alternate text and supplementary information to tags
    However, there is a weird case where the tooltip of the alt text is not shown on hover for a specific page (page 5 of the attached PDF)
    http://s000.tinyupload.com/?file_id=63161349344665038065
    Please advise if there is something wrong with the PDF that is causing Reader to not show the alt text for the images in that certain page. (and if the PDF should be fixed or is Reader the one that has a problem).
    Thanks

    RamaRao.G wrote:
    I added a JInternalframe on south side of a JFrame.Well, that's plain wrong. JInternalFrame is meant to be added to a JDesktopPane.
    I added mouse listeners to JFrame. In mouse release I am placing one image at mouse release x,y location by following statement.
    g2.drawImage(bitmapImage, x, y, w , h, null)
    Problem is when I do mouse release just near to JInternalFrame component which added south side of main Jframe.
    showing some part of image on south panel for a sec and then going back. Directly It should to go back side JFrame .
    It should not appear on JInternalFrame even for fraction of sec also.To get better help sooner, post a [_SSCCE_|http://mindprod.com/jgloss/sscce.html] that clearly demonstrates your problem.
    Use code tags to post codes -- [code]CODE[/code] will display asCODEOr click the CODE button and paste your code between the {code} tags that appear.
    db

Maybe you are looking for