Focusrite Scarlett 2i2 Cant Hear Playback With Logic

Hi all,
I'm very sorry to trouble you's however I was wondering if anyone can give me a hand.
Im fairly new to Logic. However I just set up my focusrite scarlett 2i2.
It seems to be recording fine however I cannot seem to hear playback of any of my recordings.
I was wondering if anyone had any tips to help me out.
Thank you so much for taking the time to read this.

MM,
First take a look at this part of the manual, mainly the chapter... "Configuring Your Audio Hardware"
http://help.apple.com/logicpro/mac/9.1.6/en/logicpro/usermanual/#chapter=2%26sec tion=0
Reading the manual is an important part of learning Logic.
Next:
What are you listening with, where are you expecting to hear the audio playback?
Do you have headphones or speakers plugged into the Focusrite?

Similar Messages

  • Why am I hearing a clicking noise in my headphones? I'm on the iMac and I'm going through logic pro x. i have a focusrite scarlett 2i2 and my mic is a blue spark. is it my presets? i just want the clicking/popping noise to go away

    why am I hearing a clicking noise in my headphones? I'm on the iMac and I'm going through logic pro x. i have a focusrite scarlett 2i2 and my mic is a blue spark. is it my presets? i just want the clicking/popping noise to go away

    Hi,
    Sorry to hear you are experiencing problems with you device.
    Please raise a case with our Customer Support team and we will do everything we can to help:
    http://global.focusrite.com/answerbase/contact
    We look forward to hearing from you.
    Best regards,
    Luke
    Focusrite Technical Support UK

  • Focusrite Scarlett 2i2 clapping and crackling issues with Logic Pro x new iMac 27"

    Hi,  I have just purchased a brand new iMac and downloaded Logic Pro x,  I also purchased the Focusrite Scarlett 2i2 interface.  I have downloaded the drivers from the focusrite website and everything is set up,  when I plug in guitar or mic I get really bad clapping and crackling to the point where the sound cuts out altogether.  I have changed buffer size and sample rates and everything else I can think of but nothing seems to fix the problem.  I also deleted the 2i2 drivers and logic and reinstalled them both but still have the same issue,  when I record using the iMac built in mic everything is fine so it's deffinately something to do with the interface.  I am waiting to hear back from Focusrite tech help.  Does anyone else have this problem?  Any help would be appreciated.

    I'm having a similar issue which might indicate that the problem is not your interface.
    Yesterday I migrated all my stuff from my 2009 iMac to a brand new iMac 27", and when I did a quick test to play back some old projects in Logic there was loads of annoying clicks and pops. My interface is a Roland Octa-Capture.
    I also noticed some weird CPU spikes from time to time, which I never had on my older, much less powerful iMac...

  • Anyone using the Focusrite Scarlett 2i2 with Logic?

    I am looking to replace my Tascam US-122 with something of similar size/inputs. I've watched some videos and seen some reviews about the Scarlett 2i2, but I was wondering if anyone has any personal experience using it with Logic. I am wanting to make sure it will run with the 64-bit version of Logic that I am running on Lion. Currently to get my US-122 to work, i have to boot the computer in 32-bit mode or else my computer does not read the interface. I have also heard good things about the inputs in the Scarlett 2i2, and about Focusrite preamps in general, but I have never used them before. At this point, anything will be an upgrade from the Tascam unit that is starting to go faulty on me. This Focusrite unit seems like it could be exactly what I am looking for, I am just looking to see what others have to say about using it with their setups.

    Hi Miss Clandestine,
    The Scarlett 2i2 will work just fine with the 64-bit version of Logic in Mac OS X Lion.
    Here's a little example of what the preamps sound like: http://youtu.be/5sSBwkzdAU4 (yes, it was actually recorded through a 2i2 )
    Let me know if you have any other questions, I'd be glad to help out!
    Best Regards,
    David Tichauer // Focusrite Technical Support

  • Cant hear anything in logic express 8

    ok so i just got logic express 8 and im all excited to use it...except after i went through and set up my M-audio firewire solo interface with the core audio drivers in logic i cant hear a **** thing im doing
    i just need like step by step help here, any at all would be appreciated
    also i am trying to put the output to the headphone port on the back of my imac (i dont have monitors yet) is this possible? or do i need to get the monitors?
    even when i use my m-audio keystation 61es i can see that logic is getting the signal and even records it but i never hear it in recording or even in playback!
    thank you in advance

    I was having a similar problem. This little walk-through worked for me. Try it out, hopefully it was fix your problem. Good luck. http://support.apple.com/kb/HT1215

  • Can't hear playback with USB audio interface plugged in

    I start Logic Pro 8 and then plug in Lexicon Lambda for a USB interface between guitar and macbook pro. With the Lambda plugged in I hear nothing from mac or headphone input on Lambda. If I unplug Lambda I can hear playback from mac just fine thru speakers or headphones.
    Very appreciative of any advice on how to solve this.
    Thanks.

    berkleyrob wrote:
    I start Logic Pro 8 and then plug in Lexicon Lambda for a USB interface between guitar and macbook pro. With the Lambda plugged in I hear nothing from mac or headphone input on Lambda.
    Unplug your audio interface, reboot the Mac, plug the USB interface in, let it be recognized. Open Audio/MIDI Setup (in utilities) see if the Lambda shows up as an input and output device.
    Yes/No?
    If yes, you don't have to select if for any of the Input/Outputs, Logic's audio interface selection operates independently from the system.
    Open Logic go to "Preferences/Audio) select the Lexicon or Lambda interface as the default unit, set audio buffers to 256.
    Anything yet.
    All audio I/O will be coming from the lexicon the Mac's audio system is now out of the equation.
    pancenter-

  • I cant hear rings with 4s, after ios 5.1 update

    Hi all
    I have an iphone 4s, and I have used for 15 days.
    I had very happle when using phone with ios 5.0.1, and no problem. rings sound was very high.
    but when I have updated to ios 5.1, I was very sad. because when my friends call me, I cant hear rings. rings sound is very very low.
    I tried all of solves, back up, restore, but I cant solved problem.
    Now I cant hear calls.
    thanks to apple, iphone has vibration and when call coming, phone vibrates. and I talk with my friends.
    please help me.
    Best Regards
    Aydın

    There's another thread on this with some ideas:
    https://discussions.apple.com/thread/3790682?start=0&tstart=0
    Here's my post of what worked for me:
    "So, a hard reset didn't work for me, neither did reset all settings.
    After Macteen's comment I did two more hard resets, and it brought back Siri's sound, but still no app sounds.
    So I did an 'erase everything' and restore. That worked. All sounds are back. It was a bit of a pain - especially since I don't normally sync apps on this phone (my iPad and my wife's iPhone also hook up to this computer, and we don't want to 'cross-polinate' apps), but it worked... better than exchanging for a new one."

  • Playback with logic espress

    Hi i have mac pro . new to mac computers, i have m - audio and i am abble to record sound and midi to logic express , but when i play back the sound or midi i dont have sound, i have tried all possible configuratios on system preferences ( sound ) . I dont know what to do anymore , out of ideas.
    Please someone help

    Hi i have imput m-audio solo 1/2 on logic express , preferences audio drivers ,
    also on system preferences ( sound ) i have input m-audio solo 1/2 on imput.
    on system preferences audio i have line out, built in line output, and i hear my i-tunes sounds with speakers connected on nthe back of computer. Help please

  • Focusrite USB 2.0 Audio Driver Scarlett 2i2 in Premiere CC2014 not working

    Hi everybody.
    I just recently upgraded to CC and cannot use my Audio Interface with it.
    Info:
    i7
    Windows 7 Ultimate
    Focusrite Scarlett 2i2, drivers up to date
    Premiere Pro CC 2014 up do date
    GeForce GTX Titan
    In CS6 i have set the audio hardware to Focusrite USB 2.0 Audio Driver.
    ASIO Settings:
    Buffer length 10
    In Latency is 19,6
    Out latency is 28,9
    Sample Rate 48000
    ...and it works like a charm.
    In CC 2014 however, i can only use Premiere WDM sound.
    If i choose the Focusrite, my sequence won't play. I can still scrub but with no audio.
    Also recording does not work.
    I often have to punch in layout-voiceovers for timing and need this to work, so any help would be greatly appreciated!
    thank you all!

    JSS1138 schrieb:
    Premiere Pro is not the best with USB audio.  Sometime it works, often it doesn't.  My recommendation is to skip any type of USB audio and only use real audio connections.
    Thank you for your input.
    I am using this setup in CS6 and it works great but could not get it to work with CC. So i can't just settle with "skip any type of USB audio".
    Anyway, i figured it out:
    I chose Premiere Pro WDM sound instead of the scarlett and in the ASIO settings chose the Scralett as input. works just how it's supposed to now.

  • I keep getting a buzz when plugging in to garageband through my focus rite scarlett 2i2?

    I purchased a mac book pro for recording purposes with garageband. to my surprise my old mbox wasnt compatible. So today I went out to guitar center and bought a new audio interface. a focusrite scarlett 2i2. finally got it set up. drivers downloaded and audio is coming through. but i keep getting a nasty buzz that fades in and out. anyone know how to get rid of that. i've checked the cables and all exterior plugs. but i cant get rid of it. HELP!

    I'd guess a bad ground connection somewhere, either in the box or one of the cables.

  • Crackling noises when using Scarlett 2i2?

    Just bought the Focusrite Scarlett 2i2 yesterday as my previous audio interface broke. Now I am having crackling noises when using the 2i2. . .a problem I did not have with my previous M-Audio Fast Track C400. . .so I know it's a problem specific to the 2i2. Already downloaded the latest drivers as well.
    Anybody have any solutions or similar problems with this product??? The crackling noise is intolerable.
    Thanks.

    Hi lee,  it sounds like the problem your having is exactly the same as mine.  When I use the 2i2 there is clapping and crackling which gets worse and worse until the sound disappears,  I know a few people on different forums are having the same issue so I don't think it is the interface.  I'm using iMac 27
    •      NVIDIA GeForce GTX 775M 2GB GDDR5
    •      3.5GHz Quad-core Intel Core i7, Turbo Boost up to 3.9GHz
    •      16GB 1600MHz DDR3 SDRAM - 2X8GB
    •      1TB Serial ATA Drive @ 7200 rpm
    There should be no problems with this set up in terms of capability,  I'm still waiting to hear back from Focusrite tech help desk and when I do I'll share the outcome.  I hope this can be resolved,  let me know if you have any luck before me? 
    If I was in the UK I would pick up the phone and call Focusrite but I'm in Australia!!
    Steve

  • Cant hear song playback while recording with external USB Interface Mic in Garageband

    Hi there
    There must be something wrong with my settings in Gargaeband/Mac Sound Settings.
    I have Garageband 9 (V5.1) running a song I have already recorded using a USB keyboard.
    I want to record using my external mic and my USB Audio Interface, so
    I select New Track> Real Instrument
    I plug in my Yamaha Audiogram 3 USB AUdio Interface and I get a pop up stating
    "Garageband is scanning your system for audio devices, and has detected a device named "USB Audio Codec"
    If you want to use this device do not disconnect it during the scanning process.
    Do you want to use this devise No/Yes."
    I select Yes and INPUT SOURCE changes from
    Mono 1 (Built-in Microphone)
    to
    Mono 1 (USB Audio CODEC)
    I can see the signal lights lighting up on the audiogram 3 when I talk into the mic, so theres no problem there.
    Also when I hit record I can record audio using the mic, and can see the levels (and the audio wave I am creating being drawn on the screen) but I cannot hear the track itself when I am recording using the mic. Nor can I hear the track or the new mic recorded audio AFTER I have hit stop.
    The only way to hear the song again with the newly recorded mic track is to unplug the Audiogram 3 (Then I get another Pop-up stating
    "The audio device "USB Audio CODEC" has been disconnected!
    Do you want to switch to Built-in Audio or quit Garageband?"
    I select USE BUILT-IN AUDIO)
    Then the input source changes back to
    Mono 1 (Built-in Microphone)
    And I can hear the track again.
    So my problem as you can see if that I cant hear the track while recording using the microphone with the Audiogram 3.
    But I can record video with audio using the audiogram 3 USB Audio Inteface and mic using photobooth when I select change Sound>Input to USB Audio Codec in system preferences
    It therefore assume it must be a problem with the internal audio settings of the mac/garageband.
    Can anyone advise?
    thanks!

    I can see the signal lights lighting up on the audiogram 3 when I talk into the mic, so theres no problem there.
    Also when I hit record I can record audio using the mic, and can see the levels (and the audio wave I am creating being drawn on the screen) but I cannot hear the track itself when I am recording using the mic. Nor can I hear the track or the new mic recorded audio AFTER I have hit stop.
    In order to hear yourself while you are recording, you need to set Monitor to "ON" under the Track Info panel.
    Also, what are your sound output settings?  It sounds like you haven't selected the right output source. 
    If your speakers or headphones are plugged into your audio interface, then you need to go into Preferences -> Audio/MIDI and select your audio interface under Output as well as Input.  If your speakers or headphones are built-in or plugged directly into your computer, then you need to select Built-In under Output. 
    I have a sneaky feeling that you are in the latter scenario, and that when you plug in your audio interface Garageband is automatically switching both Input and Output over to your interface, which means no sound output as long as the interface is plugged in.

  • Focusrite Scarlett 6i6 Not Working With CC 2014?

    Hey there,
    Been a long time lurker here, first time posting :-)
    Just purchased a Focusrite Scarlett 6i6 for my new iMac (running Mavericks) and it isn't working with some of my adobe suite. I can get it to output audio through Quicktime, iTunes, Logic Pro X and OSX system sounds but it doesn't appear as an option for sound in either Premiere or After Effects. It is selectable however in Speedgrade. In the audiomidi setup Premiere and After Effects are listed as Aggregate devices that are using the Scarlett as an interface, but occasionally that link just goes away and it says that the aggregate has no devices. Anyone have any ideas?
    -zak adams

    Hi zakladams,
    See if this FAQ helps you out: FAQ: How do I set up a USB microphone in Premiere Pro?
    Thanks,
    Kevin

  • My iphone 3gs fell down and now it dosnt charge ,nor is the home button responding. there is a slight gap in the left side (back panel as well)..further the caller cant hear me but conversation is clear with earphones

    HI all,
    My iphone 3gs fell down and now it dosnt charge ,nor is the home button responding. there is a slight gap in the left side (back panel as well)..further the caller cant hear me but conversation is clear with earphones..plz help

    sounds like the fall caused some damage. get it replaced through apple

  • Why my friends cant hear me when I call them with Tango or oovoo i have been tried everything

    Why my friends cant hear me when I call them with Tango or oovoo?

    I Have been tried everything.

Maybe you are looking for