FOD_11.zip instructions "classes" directory not found

I was going through the setup steps to install the "Oracle ADF: Build a Fusion Web Application" tutorial found under Turoials on "Oracle JDeveloper Home" site and when I run the "build.xml" ant file an error is display that says:
BUILD FAILED
C:\download\jdeveloper\FOD_11\Infrastructure\Ant\build.xml:38: destination directory "C:\download\jdeveloper\FOD_11\Infrastructure\Ant\classes" does not exist or is not a directory
The directory "C:\download\jdeveloper\FOD_11" is where I unziped the FOD_11.zip file to. Under the "Infrastructure\Ant" direcortory there is not a "classes" directory. How is that created? It is not in the zip file either, does it have to be built, if so how?

Did you set the properties for the ant build file as described here:
http://www.oracle.com/technology/products/jdev/samples/fod/index.html

Similar Messages

SAPinst error:- The java class is not found: com.sap.engine.offline.Offlin

Hi,
I am in the midst of Installing SOLMAN on RHEL5-ORACLE
Have installed IBM JDK version 1.4.2_10
During the CREATE SECURE STORE PHASE I am getting the following error:
sapinst_dev log file O/P
WARNING[E] 2008-06-09 18:04:43.225
           CJSlibModule::writeError_impl()
CJS-30050 Cannot create the secure store. SOLUTION: See output of log file SecureStoreCreate.log:
The java class is not found: com.sap.engine.offline.OfflineToolStart.
TRACE      2008-06-09 18:04:43.225 [iaxxejsbas.hpp:483]
           EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
TRACE      2008-06-09 18:04:43.243 [syuxctask.cpp:1382]
           CSyTaskImpl::start(bool)
A child process has been started. Pid = 2529
TRACE      2008-06-09 18:04:43.281 [syuxctask.cpp:1382]
           CSyTaskImpl::start(bool)
A child process has been started. Pid = 2530
ERROR      2008-06-09 18:04:43.310 [sixxcstepexecute.cpp:951]
FCO-00011 The step createSecureStore with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_SecureStore|ind|ind|ind|ind|8|0|createSecureStore was executed with status ERROR .
TRACE      2008-06-09 18:04:43.317 [iaxxgenimp.cpp:752]
            CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing service SAP Solution Manager 4.0 Support Release 4 > SAP Systems > Oracle > Central System > Central System. You may now </p> <ul> <li> choose <i>Retry</i> to repeat the current step. </li> <li> choose <i>View Log</i> to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> <p> Log files are written to /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS. </p> </body></html>
TRACE      2008-06-09 18:04:43.317 [iaxxgenimp.cpp:1255]
           CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
SAPINST.LOG file O/P
WARNING 2008-06-09 18:04:43.224
Execution of the command "/opt/IBMJava2-amd64-142/bin/java -classpath /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/launcher.jar -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.security.core.server.secstorefs.SecStoreFS /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/lib:/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/exception.jar:/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/logging.jar:/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/tc_sec_secstorefs.jar create -s SMD -f /sapmnt/SMD/global/security/data/SecStore.properties -k /sapmnt/SMD/global/security/data/SecStore.key -enc -p XXXXXX" finished with return code 1. Output:
The java class is not found: com.sap.engine.offline.OfflineToolStart
WARNING[E] 2008-06-09 18:04:43.225
CJS-30050 Cannot create the secure store. SOLUTION: See output of log file SecureStoreCreate.log:
The java class is not found: com.sap.engine.offline.OfflineToolStart.
ERROR 2008-06-09 18:04:43.310
FCO-00011 The step createSecureStore with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_SecureStore|ind|ind|ind|ind|8|0|createSecureStore was executed with status ERROR .
SecurStoreCreate log O/P
The java class is not found: com.sap.engine.offline.OfflineToolStart
Pls suggest how to resolve this issue
Pls help to resolve this issue
Rgds,
Abhijeet

Hi All,
I Found the Solution.
The SAPinst tool was somehow not able to extracte the
J2EEINSTALL.SAR files from the JAVA Components DVD.
So I manually extracted the the file in the temporary install folder which the SAPinst creates in the /tmp filesystem (on LINUX by deafult) during the installation process.
The following command is used (I used this on Red Hat LINUX 5.2) to extract the J2EEINSTALL.SAR file:-
/sapmnt/SMD/exe/SAPCAR
-xvf /dump/SR4_Java_Components/D51033521/DATA_UNITS/JAVA_J2EE_OSINDEP_J2EE_INST/J2EEINSTALL.SAR
/sapmnt/SMD/exe/SAPCAR -->source directory of the file SAPCAR which is used to extarct CAR / SAR files on UNIX
/dump/SR4_Java_Components/D51033521/DATA_UNITS/JAVA_J2EE_OSINDEP_J2EE_INST/J2EEINSTALL.SAR--> destination dir. where the SAPinst tool will read and execute the file.
Rgds,
Abhijeet K

The java class is not found: com.sap.inst.migmon.exp. "During export "

Hello all,
I am trying to run export of PI system (ABAP+JAVA) uisng inst master NWSR3
I am hit with an issue before the export_ABAP starts . the following are the error lines
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 AIX ppc64-64 j9ap64142-20070708 (JIT enabled)
J9VM - 20070530_12820_BHdSMr
JIT - 20070529_1824_r8
GC - 20070328_AA)
The java class is not found: com.sap.inst.migmon.exp.ExportMonitor
Please share if there are any possible solutions to overcome this error & make export run smoother
thanks & regards,
rahul

Hello,
Please check the JVM-settings as per note
1024539 (including the environment-variables and APARS).
For some reason the 'migmon.jar' - file can no longer
be found in your installation directory
It might be sufficient to copy the archive 'MIGMON.SAR' from your
master-cd (subdirectory IM_AIX_PPC64/COMMON/INSTALL) to your
installation directory and extract the archive there by 'SAPCAR -xvf
If the problem persists
apply the latest patch as per note
784118 System Copy Java Tools
regards,
John Feely

"The java class is not found:" post clone

Hi.
I've just cloned an 11.5.10.2 environment from one AIX5.2 server running 9.2.0.7 to another server at the same AIX and RDBMS level.
After running the clone steps, the application was automatically started and I was able to access it via Self Service, forms, run concurrent requests etc - in short, I had a working system.
Now, however, when I try to stop or start the application using adstrtal.sh/adstpall.sh, I hit the following:
"The java class is not found: oracle/apps/ad/autoconfig/ServiceControl
Check logfile /data/testcomn/admin/log/TEST_ireaix2/05011011.log for details"
On the command line, when I call the line the script is trying to execute:
/usr/java14/bin/java -classpath "${CLASSPATH}:${JAVA_TOP}:${FND_TOP}/java/3rdparty/stdalone/xmlparserv2.zip" oracle.apps.ad.autoconfig.ServiceControl -e /oracle/testappl/admin/TEST_ireaix2.xml -u apps/<PASS> -m 2 -l yadda –debug
I'm able to bypass this particular error and some of the application processes do start but not all of them and obviously I still have an underlying Java/environment issue.
Any suggestions gratefully received.
Rgds,
Jes

Check logfile /data/testcomn/admin/log/TEST_ireaix2/05011011.log for details"What does the log file say?

"The java class is not found:" during cloning

Hi.
I've just cloned an 11.5.10.2 environment from one AIX5.2 server running 9.2.0.7 to another server at the same AIX and RDBMS level.
After running the clone steps, the application was automatically started and I was able to access it via Self Service, forms, run concurrent requests etc - in short, I had a working system.
Now, however, when I try to stop or start the application using adstrtal.sh/adstpall.sh, I hit the following:
"The java class is not found: oracle/apps/ad/autoconfig/ServiceControl
Check logfile /data/testcomn/admin/log/TEST_ireaix2/05011011.log for details"
On the command line, when I call the line the script is trying to execute:
/usr/java14/bin/java -classpath "${CLASSPATH}:${JAVA_TOP}:${FND_TOP}/java/3rdparty/stdalone/xmlparserv2.zip" oracle.apps.ad.autoconfig.ServiceControl -e /oracle/testappl/admin/TEST_ireaix2.xml -u apps/starl1ght -m 2 -l yadda –debug
I'm able to bypass this particular error and some of the application processes do start but not all of them and obviously I still have an underlying Java/environment issue.
Any suggestions gratefully received.
Rgds,
Jes

May be you should try posting this on an appropriate forum to get a speedier response.
Regards

The java class is not found: oracle.apex.APEXExport

Hi,
when i run java oracle.apex.APEXExport
i have the error
The java class is not found: oracle.apex.APEXExport
CLASSPATH=/opt/ora/admin/Apex_Backup/class/classes12.zip:/opt/ora/admin/Apex_Backup/APEXExport.class
also
CLASSPATH=/opt/ora/admin/Apex_Backup/class/classes12.zip
causes the error
Can somebody help he out of this?

Hello,
Take a look at my blog post on Backing Up Your Applications, available here -
http://jes.blogs.shellprompt.net/2006/12/12/backing-up-your-applications/
I run through all the steps you need to do to get it working.
Hope this helps,
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

Binary class definition not found: Hello --- When access the sample

Hi,
I followed the the document of
Oracle9iAS Release 2 Containers for J2ee
dated 12/01/01
to deploy the stateless pure java web service, Hello.
When I hit
http://server:port/hellows/helloService?wsdl
I got the generated WSDL
Also, I can get the proxy class source and jar from
http://server:port/hellows/helloService?proxy_jar
http://server:port/hellows/helloService?proxy_source
However, after I compiled HelloClient and HelloProxy, I got the following error when I tried to access the web service, Hello
Any advice is appreciated.
Qiming
[SOAPException: faultCode=SOAP-ENV:Protocol; msg=Unsupported response content type "text/html", must be: "text/xml". Response was:
<HTML><HEAD><TITLE>500 Internal Server Error</TITLE></HEAD><BODY><H1>500 Internal Server Error</H1><PRE>oracle.j2ee.xanadu.JasperGenerationError: no source generated during code generation!: 1 in getFile name: \Hello.class
<br>1 in getFile name: \Hello.java
<br>error: error message 'class.format' not found<br>binary class definition not found: Hello
<br>
<br>     at oracle.j2ee.ws.JavaWrapperGenerator.generate(JavaWrapperGenerator.java:267)
<br>     at oracle.j2ee.ws.RpcWebService.generateWrapperClass(RpcWebService.java:668)
<br>     a[i]Long postings are being truncated to ~1 kB at this time.

You may want to try the latest and greatest OC4J 9.0.3 which is on OTN at:
OC4J 9.0.3: http://otn.oracle.com/software/htdocs/devlic.html?/software/products/ias/htdocs/utilsoft.html
The updated Web service writeups are in:
<oc4j_home>\webservices\demo\demo.zip (unzip and look in the <demo_unzip>\basic\java_services\README.txt)
One thing that might cause your problem is making sure your class path is updated to point to all the right class files as described in the writeup, including the jar file containing the downloaded class files.
Mike.

Microsoft Office for Mac installer give following error: Aug 1 15:23:08 MyDisk Installer[537]: directory not found '/var/folders/5v/s2wpc1ms7s99d0g2dx7lzjfw0000gn/T//Install.537GZGcI6' Aug 1 15:23:08 MyDisk Installer[537]: Install failed: The Installer

Aug 1 15:23:08 MyDisk Installer[537]: directory not found '/var/folders/5v/s2wpc1ms7s99d0g2dx7lzjfw0000gn/T//Install.537GZGcI6'
Aug 1 15:23:08 MyDisk Installer[537]: Install failed: The Installer can’t create the folder “/var/folders/5v/s2wpc1ms7s99d0g2dx7lzjfw0000gn/T//Install.537GZGcI6”.
Aug 1 15:23:09 MyDisk Installer[537]: Displaying 'Install Failed' UI.
Aug 1 15:23:09 MyDisk Installer[537]: 'Install Failed' UI displayed message:'The Installer can’t create the folder “/var/folders/5v/s2wpc1ms7s99d0g2dx7lzjfw0000gn/T//Install.537GZGcI6”.'.
other prods having trouble with /var/* as well...
what gives? and what corrections to take?
Thanks in advance

Back up all data.
Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them.
From the application's menu bar, select
File ▹ Restore Standard Fonts...
You'll be prompted to confirm, and then to enter your administrator login password.
Boot in safe mode to rebuild the font caches. Boot again as usual and test.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. In that case, ask for instructions.
Also note that if you deactivate or remove any built-in fonts, for instance by using a third-party font manager, the system may become unstable.

Calling ni845xStatusToString gives: NI-845x: Unable to decipher status code 0xfffb6528 ( errorCode ). Error -1 - Directory not found.

Hi All,
I'm trying to get started programming my NI-USB 8451 with the NI USB 845x driver.
What I am trying to do is simply retrieve some of the error and warning messages from the driver. As instructed in the Hardware and Software manual for the NI USB 845x, I am making a call to
ni845xStatusToString
However, for any error code (valid or invalid), I get the following string back from the driver:
NI-845x: Unable to decipher status code 0xfffb6528 (<errorCode>). Error -1 - Directory not found.
where I see the supplied error code in <errorCode> above.
This makes me think that some type of dictionary or "Directory" that is external to the driver is not available on my system. Is this the case?
I have the 64-bit driver installed on my machine. This is further consolidated by the fact that all the other functions (ni845x*) work as intended and I am able to communicate with the device.
Can anyone help me understand why I cannot retrieve the error strings or warnings strings?
Your response is greatly appreciated.
Thank you!
Sincerely,
Ishrak Khair
Instrument Control Toolbox
MathWorks

That is odd that your application has trouble with it.
LabVIEW does not but, if you are seeing the error you reference update the driver its in the known issues resolved for 2.1.1
Are you trying to open the error file from an additional process? The driver is limited having no "Multi-Process Support"
Jeff

PLEASE help..class function not found..

I am writing a simple email validation and I get a TON of errors.
1) is Class function not found. on - function validateEmail();
2) and 11 Undefined variable or class name: document .
The code is listed below -
<html>
<head>
<meta http-equiv="Content-Language" content="en-us">
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
<meta name="GENERATOR" content="Microsoft FrontPage 4.0">
<meta name="ProgId" content="FrontPage.Editor.Document">
<title>New Page 1</title>
<%
function validateEmail();
if (document.forms[0].EMAIL_ADDRESS.value.length != 0)
if ( (document.forms[0].EMAIL_ADDRESS.value.indexOf("@") == -1) ||
(document.forms[0].EMAIL_ADDRESS.value.charAt(0) == ".") ||
(document.forms[0].EMAIL_ADDRESS.value.charAt(0) == "@") ||
(document.forms[0].EMAIL_ADDRESS.value.length < 6) ||
(document.forms[0].EMAIL_ADDRESS.value.indexOf(".") == -1) ||
(document.forms[0].EMAIL_ADDRESS.charAt(document.forms[0].EMAIL_ADDRESS.value.indexOf("@")+1) == ".") ||
(document.forms[0].EMAIL_ADDRESS.value.charAt(document.forms[0].EMAIL_ADDRESS.value.indexOf("@")-1) == ".") ||
(document.forms[0].EMAIL_ADDRESS.value.charAt(0) == ' ') )
alert ("Please enter valid email address");
document.forms[0].EMAIL_ADDRESS.focus();
document.forms[0].EMAIL_ADDRESS.select();
return false;
else
return true;
%>
</head>
-- lots of input fields with the last being -
<input type="text" name=EMAIL_ADDRESS onBlur="validateEmail();"></td>
????

When I remove tags <% %> all of the function ends up in html and thus on my page.
<html>
<head>
<meta http-equiv="Content-Language" content="en-us">
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
<meta name="GENERATOR" content="Microsoft FrontPage 4.0">
<meta name="ProgId" content="FrontPage.Editor.Document">
<title>New Page 1</title>
<%
function validateEmail();
if (document.forms[0].EMAIL_ADDRESS.value.length != 0)
if ( (document.forms[0].EMAIL_ADDRESS.value.indexOf("@") == -1) ||
(document.forms[0].EMAIL_ADDRESS.value.charAt(0) == ".") ||
(document.forms[0].EMAIL_ADDRESS.value.charAt(0) == "@") ||
(document.forms[0].EMAIL_ADDRESS.value.length < 6) ||
(document.forms[0].EMAIL_ADDRESS.value.indexOf(".") == -1) ||
(document.forms[0].EMAIL_ADDRESS.charAt(document.forms[0].EMAIL_ADDRESS.value.indexOf("@")+1) == ".") ||
(document.forms[0].EMAIL_ADDRESS.value.charAt(document.forms[0].EMAIL_ADDRESS.value.indexOf("@")-1) == ".") ||
(document.forms[0].EMAIL_ADDRESS.value.charAt(0) == ' ') )
alert ("Please enter valid email address");
document.forms[0].EMAIL_ADDRESS.focus();
document.forms[0].EMAIL_ADDRESS.select();
return false;
else
return true;
%>
</head>
<body bgcolor="powderblue">
<Form Name="My Form" Action=userInfoInsert.jsp Method=Post>
<table border="0" width="100%">
<tr>
<td width="100%">
<table border="0" width="100%">
<tr>
<td width="41%">First Name     <input type="text" name=FIRST_NAME ></td>
<td width="59%">Last Name
<input type="text" name=LAST_NAME ></td>
</tr>
</table>
</td>
</tr>
<tr>
<td width="100%">Address
<input type="text" name=Address ></td>
</tr>
<tr>
<td width="100%">Address
<input type="text" name=Address ></td>
</tr>
<tr>
<td width="100%">
<table border="0" width="100%">
<tr>
<td width="32%">City
   <input type="text" name=CITY size=10></td>
<td width="18%">State
<input type="text" name=STATE size=5></td>
<td width="50%">Zip Code
<input type="text" name=ZIP_CODE size=10 ></td>
</tr>
</table>
</td>
</tr>
<tr>
<td width="100%">Phone #
<input type="text" name=PHONE size="15" ></td>
</tr>
<tr>
<td width="100%">SSN
<input type="text" name=SSN size="17" ></td>
</tr>
<tr>
<td width="100%">
<table border="0" width="100%">
<tr>
<td width="41%">Hint Question <input type="text" name=FIRST_NAME ></td>
<td width="59%">Hint Answer <input type="text" name=LAST_NAME ></td>
</tr>
</table>
</tr>
<tr>
<td width="100%">User Name     <input type="text" name=USER_NAME ></td>
</tr>
<tr>
<td width="100%">Password        <input type="text" name=PASSWORD ></td>
</tr>
<tr>
<td width="100%">Re-Password <input type="text" name=RE_PASSWORD ></td>
</tr>
<tr>
<td width="100%">Email Address
<input type="text" name=EMAIL_ADDRESS onBlur="validateEmail();"></td>
</tr>
</table>
<INPUT type=Submit Value=Submit>
</form>
</body>
</html>

Load:Class filename not found portal

In the webgui /portal a link is provided.
when you click the link , which is mapped with the transaction
code of the ABAP program. gets displayed.
THis program is used to download PO into the File
server.
so File output path is given.
The user uses F4 help to select the directory / filename as well
In the bottom we are getting a messge
load: class FileName not found
and load: class Directory Select not found
I use cl_gui_frontend_services=> directory_browse
and kd_get_filename_on_f4.
wat might be the problem for this?
Give me your valuable suggestions
This is urgent.

Hello,
Can you tell us if you resolve your issue and how?
Thanks

404 -File or directory not found error

We have had several users report the following error message that appears inside the Rich Text Editor that is used for Instructions on the Process Steps of Formulation specs, in 6.1.0.1.32.
+404 -File or directory not found. The resource you are looking for mighthave been removed, had its name changed, or is temporarily unavailable.+
Here's the scenario. They are in edit mode on the Formulation Spec.
They go to the Process tab.
Click A Step, and see that there are several blank lines at the end of the instructions, and they want to clean up this blank space.
So they click the Instructions link, and the Instructions pop-up in a rich text editor.
They click in the editor near the bottom to get a prompt on the last blank line.
They then hit the backspace key to delete the blank lines.
As soon as they hit the backspace key the error is thrown in the editor; Not in an error message popup and no error log is recorded in the event logs.
And to make it even more interesting it doesnt happen all the time!
Has anyone else seen this behavior within Formulation specs?
P.S. Its not the IE pop-up blocker either.

Trey, i just did a quick test and was able to duplicate with the following steps:
1. open instructions
2. instead of clicking in the edit textbox, click below the edit textbox (ie. b/w the textbox and keywords)
3. hit backspace
404
my guess is, users are working quickly, think they click in the textbox, but accidently click outside the textbox. backspace is then trying to register a previous page command.
However, we changed the rich text control in 6.1.1, and it looks like this issue has been corrected.
if you find a different set of steps to recreate that triggers the 404, let us know.
thanks,
-M

"Class Circle not found in TryBouncingBalls" error message. Help !

Dear People,
I have an error message :
"TryBouncingBalls.java": Error : class Circle not found in class stan_bluej_ch5_p135.TryBouncingBalls at line 67, "
Circle circle = new Circle(xPos + 130, 30);
below are the classes TryBouncingBalls, BouncingBall, BallDemo, Canvas
Thank you in advance
Stan
package stan_bluej_ch5_p135;
import java.awt.*;
import java.awt.geom.*;
public class TryBouncingBalls
public static void main(String[] args)
Canvas myCanvas = new Canvas("Creativity at its best");
myCanvas.setVisible(true);
BouncingBall ball = new BouncingBall(50,50,16, Color.red, 500, myCanvas);
BouncingBall ball2 = new BouncingBall(70,80,20, Color.green, 500, myCanvas);
BouncingBall ball3 = new BouncingBall(90,100,16, Color.red, 500, myCanvas);
BouncingBall ball4 = new BouncingBall(30,30,20, Color.green, 500, myCanvas);
ball.draw();
ball2.draw();
ball.draw();
ball2.draw();
// make them bounce
boolean finished = false;
while(!finished) {
myCanvas.wait(50); // small delay
ball.move();
ball2.move();
ball3.move();
ball4.move();
// stop once ball has travelled a certain distance on x axis
if(ball.getXPosition() >= 550 && ball2.getXPosition() >= 550)
finished = true;
myCanvas.setFont(new Font("helvetica", Font.BOLD, 14));
myCanvas.setForegroundColor(Color.red);
myCanvas.drawString("We are having fun, ...\n\n", 20, 30);
myCanvas.wait(1000);
myCanvas.setForegroundColor(Color.black);
myCanvas.drawString("...drawing lines...", 60, 60);
myCanvas.wait(500);
myCanvas.setForegroundColor(Color.gray);
myCanvas.drawLine(200, 20, 300, 50);
myCanvas.wait(500);
myCanvas.setForegroundColor(Color.blue);
myCanvas.drawLine(220, 100, 370, 40);
myCanvas.wait(500);
myCanvas.setForegroundColor(Color.green);
myCanvas.drawLine(290, 10, 320, 120);
myCanvas.wait(1000);
myCanvas.setForegroundColor(Color.gray);
myCanvas.drawString("...and shapes!", 110, 90);
myCanvas.setForegroundColor(Color.red);
myCanvas.drawString("to bring to focus creative ideas !", 310, 290);
// the shape to draw and move
int xPos = 10;
Rectangle rect = new Rectangle(xPos + 40, 150, 30, 20);
Rectangle rect2 = new Rectangle(xPos + 80, 120, 50, 25);
Rectangle rect3 = new Rectangle(xPos+ 1200, 180, 30, 30);
Rectangle rect4 = new Rectangle(xPos + 150, 220, 40, 15);
myCanvas.fill(rect);
myCanvas.fill(rect2);
myCanvas.fill(rect3);
myCanvas.fill(rect4);
Circle circle = new Circle(xPos + 130, 30);
// Circle circle2 = new Circle(xPos + 150, 50);
// Circle circle3 = new Circle(xPos + 170, 30);
// Circle circle4 = new Circle(xPos + 200, 40);
// myCanvas.fill(circle);
// myCanvas.fill(circle2);
// myCanvas.fill(circle3);
// myCanvas.fill(circle4);
// move the rectangle and circles across the screen
for(int i = 0; i < 200; i ++) {
myCanvas.fill(rect);
myCanvas.fill(rect2);
myCanvas.fill(rect3);
myCanvas.fill(rect4);
myCanvas.wait(10);
myCanvas.erase(rect);
myCanvas.erase(rect2);
myCanvas.erase(rect3);
myCanvas.erase(rect4);
xPos++;
rect.setLocation(xPos, 150);
rect2.setLocation(xPos, 120);
rect3.setLocation(xPos, 180);
rect4.setLocation(xPos, 220);
// at the end of the move, draw once more so that it remains visible
myCanvas.fill(rect);
myCanvas.fill(rect2);
myCanvas.fill(rect3);
myCanvas.fill(rect4);
package stan_bluej_ch5_p135;
import java.awt.*;
import java.awt.geom.*;
* Class BouncingBall - a graphical ball that observes the effect of gravity. The ball
* has the ability to move. Details of movement are determined by the ball itself. It
* will fall downwards, accelerating with time due to the effect of gravity, and bounce
* upward again when hitting the ground.
* This movement can be initiated by repeated calls to the "move" method.
* @author Bruce Quig
* @author Michael Kolling (mik)
* @author David J. Barnes
* @version 1.1 (23-Jan-2002)
public class BouncingBall
private static final int gravity = 3; // effect of gravity
private int ballDegradation = 2;
private Ellipse2D.Double circle;
private Color color;
private int diameter;
private int xPosition;
private int yPosition;
private final int groundPosition; // y position of ground
private Canvas canvas;
private int ySpeed = 1; // initial downward speed
* Constructor for objects of class BouncingBall
* @param xPos the horizontal coordinate of the ball
* @param yPos the vertical coordinate of the ball
* @param ballDiameter the diameter (in pixels) of the ball
* @param ballColor the color of the ball
* @param groundPos the position of the ground (where the wall will bounce)
* @param drawingCanvas the canvas to draw this ball on
public BouncingBall(int xPos, int yPos, int ballDiameter, Color ballColor,
int groundPos, Canvas drawingCanvas)
xPosition = xPos;
yPosition = yPos;
color = ballColor;
diameter = ballDiameter;
groundPosition = groundPos;
canvas = drawingCanvas;
* Draw this ball at its current position onto the canvas.
public void draw()
canvas.setForegroundColor(color);
canvas.fillCircle(xPosition, yPosition, diameter);
* Erase this ball at its current position.
public void erase()
canvas.eraseCircle(xPosition, yPosition, diameter);
* Move this ball according to its position and speed and redraw.
public void move()
// remove from canvas at the current position
erase();
// compute new position
ySpeed += gravity;
yPosition += ySpeed;
xPosition +=2;
// check if it has hit the ground
if(yPosition >= (groundPosition - diameter) && ySpeed > 0) {
yPosition = (int)(groundPosition - diameter);
ySpeed = -ySpeed + ballDegradation;
// draw again at new position
draw();
* return the horizontal position of this ball
public int getXPosition()
return xPosition;
* return the vertical position of this ball
public int getYPosition()
return yPosition;
package stan_bluej_ch5_p135;
import java.awt.*;
import java.awt.geom.*;
* Class BallDemo - provides two short demonstrations showing how to use the
* Canvas class.
* @author Michael Kolling and David J. Barnes
* @version 1.0 (23-Jan-2002)
public class BallDemo
private Canvas myCanvas;
* Create a BallDemo object. Creates a fresh canvas and makes it visible.
public BallDemo()
myCanvas = new Canvas("Ball Demo", 600, 500);
myCanvas.setVisible(true);
* This method demonstrates some of the drawing operations that are
* available on a Canvas object.
public void drawDemo()
myCanvas.setFont(new Font("helvetica", Font.BOLD, 14));
myCanvas.setForegroundColor(Color.red);
myCanvas.drawString("We can draw text, ...", 20, 30);
myCanvas.wait(1000);
myCanvas.setForegroundColor(Color.black);
myCanvas.drawString("...draw lines...", 60, 60);
myCanvas.wait(500);
myCanvas.setForegroundColor(Color.gray);
myCanvas.drawLine(200, 20, 300, 50);
myCanvas.wait(500);
myCanvas.setForegroundColor(Color.blue);
myCanvas.drawLine(220, 100, 370, 40);
myCanvas.wait(500);
myCanvas.setForegroundColor(Color.green);
myCanvas.drawLine(290, 10, 320, 120);
myCanvas.wait(1000);
myCanvas.setForegroundColor(Color.gray);
myCanvas.drawString("...and shapes!", 110, 90);
myCanvas.setForegroundColor(Color.red);
// the shape to draw and move
int xPos = 10;
Rectangle rect = new Rectangle(xPos, 150, 30, 20);
// move the rectangle across the screen
for(int i = 0; i < 200; i ++) {
myCanvas.fill(rect);
myCanvas.wait(10);
myCanvas.erase(rect);
xPos++;
rect.setLocation(xPos, 150);
// at the end of the move, draw once more so that it remains visible
myCanvas.fill(rect);
* Simulates two bouncing balls
public void bounce()
int ground = 400; // position of the ground line
myCanvas.setVisible(true);
// draw the ground
myCanvas.drawLine(50, ground, 550, ground);
// crate and show the balls
BouncingBall ball = new BouncingBall(50, 50, 16, Color.blue, ground, myCanvas);
ball.draw();
BouncingBall ball2 = new BouncingBall(70, 80, 20, Color.red, ground, myCanvas);
ball2.draw();
// make them bounce
boolean finished = false;
while(!finished) {
myCanvas.wait(50); // small delay
ball.move();
ball2.move();
// stop once ball has travelled a certain distance on x axis
if(ball.getXPosition() >= 550 && ball2.getXPosition() >= 550)
finished = true;
ball.erase();
ball2.erase();
package stan_bluej_ch5_p135;
import javax.swing.*;
import java.awt.*;
import java.awt.geom.*;
* Class Canvas - a class to allow for simple graphical
* drawing on a canvas.
* @author Michael Kolling (mik)
* @author Bruce Quig
* @version 1.8 (23.01.2002)
public class Canvas
private JFrame frame;
private CanvasPane canvas;
private Graphics2D graphic;
private Color backgroundColor;
private Image canvasImage;
* Create a Canvas with default height, width and background color
* (300, 300, white).
* @param title title to appear in Canvas Frame
public Canvas(String title)
this(title, 600, 600, Color.white);
* Create a Canvas with default background color (white).
* @param title title to appear in Canvas Frame
* @param width the desired width for the canvas
* @param height the desired height for the canvas
public Canvas(String title, int width, int height)
this(title, width, height, Color.white);
* Create a Canvas.
* @param title title to appear in Canvas Frame
* @param width the desired width for the canvas
* @param height the desired height for the canvas
* @param bgClour the desired background color of the canvas
public Canvas(String title, int width, int height, Color bgColor)
frame = new JFrame();
canvas = new CanvasPane();
frame.setContentPane(canvas);
frame.setTitle(title);
canvas.setPreferredSize(new Dimension(width, height));
backgroundColor = bgColor;
frame.pack();
* Set the canvas visibility and brings canvas to the front of screen
* when made visible. This method can also be used to bring an already
* visible canvas to the front of other windows.
* @param visible boolean value representing the desired visibility of
* the canvas (true or false)
public void setVisible(boolean visible)
if(graphic == null) {
// first time: instantiate the offscreen image and fill it with
// the background color
Dimension size = canvas.getSize();
canvasImage = canvas.createImage(size.width, size.height);
graphic = (Graphics2D)canvasImage.getGraphics();
graphic.setColor(backgroundColor);
graphic.fillRect(0, 0, size.width, size.height);
graphic.setColor(Color.black);
frame.show();
* Provide information on visibility of the Canvas.
* @return true if canvas is visible, false otherwise
public boolean isVisible()
return frame.isVisible();
* Draw the outline of a given shape onto the canvas.
* @param shape the shape object to be drawn on the canvas
public void draw(Shape shape)
graphic.draw(shape);
canvas.repaint();
* Fill the internal dimensions of a given shape with the current
* foreground color of the canvas.
* @param shape the shape object to be filled
public void fill(Shape shape)
graphic.fill(shape);
canvas.repaint();
* Fill the internal dimensions of the given circle with the current
* foreground color of the canvas.
public void fillCircle(int xPos, int yPos, int diameter)
Ellipse2D.Double circle = new Ellipse2D.Double(xPos, yPos, diameter, diameter);
fill(circle);
* Fill the internal dimensions of the given rectangle with the current
* foreground color of the canvas. This is a convenience method. A similar
* effect can be achieved with the "fill" method.
public void fillRectangle(int xPos, int yPos, int width, int height)
fill(new Rectangle(xPos, yPos, width, height));
* Erase the whole canvas.
public void erase()
Color original = graphic.getColor();
graphic.setColor(backgroundColor);
Dimension size = canvas.getSize();
graphic.fill(new Rectangle(0, 0, size.width, size.height));
graphic.setColor(original);
canvas.repaint();
* Erase the internal dimensions of the given circle. This is a
* convenience method. A similar effect can be achieved with
* the "erase" method.
public void eraseCircle(int xPos, int yPos, int diameter)
Ellipse2D.Double circle = new Ellipse2D.Double(xPos, yPos, diameter, diameter);
erase(circle);
* Erase the internal dimensions of the given rectangle. This is a
* convenience method. A similar effect can be achieved with
* the "erase" method.
public void eraseRectangle(int xPos, int yPos, int width, int height)
erase(new Rectangle(xPos, yPos, width, height));
* Erase a given shape's interior on the screen.
* @param shape the shape object to be erased
public void erase(Shape shape)
Color original = graphic.getColor();
graphic.setColor(backgroundColor);
graphic.fill(shape); // erase by filling background color
graphic.setColor(original);
canvas.repaint();
* Erases a given shape's outline on the screen.
* @param shape the shape object to be erased
public void eraseOutline(Shape shape)
Color original = graphic.getColor();
graphic.setColor(backgroundColor);
graphic.draw(shape); // erase by drawing background color
graphic.setColor(original);
canvas.repaint();
* Draws an image onto the canvas.
* @param image the Image object to be displayed
* @param x x co-ordinate for Image placement
* @param y y co-ordinate for Image placement
* @return returns boolean value representing whether the image was
* completely loaded
public boolean drawImage(Image image, int x, int y)
boolean result = graphic.drawImage(image, x, y, null);
canvas.repaint();
return result;
* Draws a String on the Canvas.
* @param text the String to be displayed
* @param x x co-ordinate for text placement
* @param y y co-ordinate for text placement
public void drawString(String text, int x, int y)
graphic.drawString(text, x, y);
canvas.repaint();
* Erases a String on the Canvas.
* @param text the String to be displayed
* @param x x co-ordinate for text placement
* @param y y co-ordinate for text placement
public void eraseString(String text, int x, int y)
Color original = graphic.getColor();
graphic.setColor(backgroundColor);
graphic.drawString(text, x, y);
graphic.setColor(original);
canvas.repaint();
* Draws a line on the Canvas.
* @param x1 x co-ordinate of start of line
* @param y1 y co-ordinate of start of line
* @param x2 x co-ordinate of end of line
* @param y2 y co-ordinate of end of line
public void drawLine(int x1, int y1, int x2, int y2)
graphic.drawLine(x1, y1, x2, y2);
canvas.repaint();
* Sets the foreground color of the Canvas.
* @param newColor the new color for the foreground of the Canvas
public void setForegroundColor(Color blue)
graphic.setColor(Color.blue);
* Returns the current color of the foreground.
* @return the color of the foreground of the Canvas
public Color getForegroundColor()
return graphic.getColor();
* Sets the background color of the Canvas.
* @param newColor the new color for the background of the Canvas
public void setBackgroundColor(Color newColor)
backgroundColor = newColor;
graphic.setBackground(newColor);
* Returns the current color of the background
* @return the color of the background of the Canvas
public Color getBackgroundColor()
return backgroundColor;
* changes the current Font used on the Canvas
* @param newFont new font to be used for String output
public void setFont(Font newFont)
graphic.setFont(newFont);
* Returns the current font of the canvas.
* @return the font currently in use
public Font getFont()
return graphic.getFont();
* Sets the size of the canvas.
* @param width new width
* @param height new height
public void setSize(int width, int height)
canvas.setPreferredSize(new Dimension(width, height));
Image oldImage = canvasImage;
canvasImage = canvas.createImage(width, height);
graphic = (Graphics2D)canvasImage.getGraphics();
graphic.drawImage(oldImage, 0, 0, null);
frame.pack();
* Returns the size of the canvas.
* @return The current dimension of the canvas
public Dimension getSize()
return canvas.getSize();
* Waits for a specified number of milliseconds before finishing.
* This provides an easy way to specify a small delay which can be
* used when producing animations.
* @param milliseconds the number
public void wait(int milliseconds)
try
Thread.sleep(milliseconds);
catch (InterruptedException e)
// ignoring exception at the moment
* Nested class CanvasPane - the actual canvas component contained in the
* Canvas frame. This is essentially a JPanel with added capability to
* refresh the image drawn on it.
private class CanvasPane extends JPanel
public void paint(Graphics g)
g.drawImage(canvasImage, 0, 0, null);

Dear Miciuli,
I found the definition for the circle in the canvas class and used it to creates circles ! Thank you for jaring my brain into thinking !
Stan
Ellipse2D.Double circle = new Ellipse2D.Double(xPos, 70, 30 , 30);

Error in File name or class name not found during Automation operation: 'CreateObject'

Hello Team,
When I am trying to execute the below code i am getting the following error. Any help would be greatly appreciated.
Set oFSO = CreateObject("Scripting.FileSystemObject")
If Not oFSO.FolderExists(SavePath) Then
Set f = oFSO.CreateFolder(SavePath)
Else
End If
53 4/11/2014 12:27:22 PM Error:
Error in <NoName(4).VBS> (Line: 9, Column: 1):
File name or class name not found during Automation operation: 'CreateObject'
I have googled through the error and tried to re-register the scrrun.dll using regsvr32 eventhogh it is successfully registered, i am getting the following error. My PC is windows 7 32bit OS.
any help is greatly appreciated.

The following script class will write a log file entry. See if it will run for you.
The script is using a class object that you might not have seen before. A little intro: The top section is just for testing the class. Normally I just comment this out after the class is working well. It should run right way. I would save the vbs file in the editor, That way when you are using autoactpath or currentscriptpath variables they will be able resolve the paths.
Paul
Attachments:
LoggingCode_V2.VBS ‏5 KB

Error in Installation--The Java class is not found: SDTGui

I am in the process of instlaling SAP in AIX machine
When i start the Startsapinst, i am getting the following error .
Pls hlep
<b>The Java class is not found: SDTGui</b>

I am using humming bird software
i have set the display.
Xclock is running
Pls help

FOD_11.zip instructions "classes" directory not found

Similar Messages

Maybe you are looking for