Fogra 39L won't load in LR4

At first I couldn't find the 39L, only Fogra 39.  Then I found ISOcoated_v2_300_eci (1).icc which is supposedly compatable, only it says:
For paper type 1 and 2 (gloss-coated and matt-coated offset paper) the standard profile ISOcoated_v2_300:eci.icc is available. The tone value increase for the print is 14 %. The Media Wedge control file is FOGRA 39L.
Of this profile one exists with a total area coverage of 330%. If this prifle is needed, it can be requested from Ugra.
I need to know:
Is that the best profile if the Brittish Magazine wants Fogra 39L?
If so, how can I get it to load? (I am thinking it has to do with CMYK v. rgb)
Would bringing it through photoshop solve anything since I only need to send them 1 photo.
THank you!
lauren

FOGRA39 is installed with Photoshop, so do it there.
ISO Coated, although nowadays more commonly used in Europe, is not. You'll have to download it from ECI ( http://www.eci.org/en/start ). It's based on FOGRA and quite similar.

Similar Messages

  • LR4 won't load on my Macbook Pro.  I get an unknown error msg.

    My copy of LR4 won't load on my MAcbook Pro.  I get an unknown error message.

    And that error message being exactly? Waht version of OSX? What MacBook exactly?
    Mylenium

  • LR4 Map sets tracklog times to UTC, so images won't load

    Opening my tracklog in LR4 Map (on a PC) plots it with a -5 hr offset, evidently UTC time (I'm on Central Daylight), so the images I shot on the outing won't load to the map. The points on the map in LR show the UTC time, whereas the same track opened in Google Maps shows the correct, local times. On October 3, b_gossweiler looked at ImageDesign704's tracklog and responded "I've removed the timezone inidications on the trackpoints and loaded the tracklog successfully into LR." Can someone explain how to get into a .gpx file and remove those timezone indicationst? My tracklog won't open in Windows.

    rljeanne wrote:
    The 07:22 to 09:16 recorded by the device is the correct local CDT time. Why should that be wrong?
    Because GPX timestamps are supposed to be in UTC, not local time. (see here)
    Neither the GPS device nor its software has any way to reset the time to UTC.
    You might want to get in touch with the manufacturer of the device, and ask them how to record UTC timestamps in a GPX file.
    Meanwhile, Google Maps plots the track just fine, with the correct local time, so it seems to me that the problem lies in what Lightroom does with the file, i.e. it assumes times to be in UTC and makes the adjustment by subtracting 5 hr from the input data.
    I'm not aware of a way to map a track file on Google Maps. But when I pull your track into Google Earth (I don't know how to map a track in Google Maps), Google Earth shows 07:00-09:16 as UTC, and adjusts accordingly to my local time zone if desired so.
    Is there any way to reset that in LR?
    You can use the tracklog time offset function in LR to adjust for the wrongly recorded timestamps.
    Beat

  • Help...PC User, LR 5 Map & Web Modules won't load

    PC DESKTOP User, Windows 7, LR5 Upgrade (did the same problem in LR4), Internet connection is fine.
    Map & Web Modules won't load on main screen. Based on what I could find in the forums it looked similar to a MAC OS issue with Flash. SO...I updated Flash and it seemed to work fine. A few days later...problem was back. I re-installed Flash again. Fixed. Upgraded to LR5...worked ok. A few days later...problem was back. Reinstalled again...worked ok. Now problem back again.
    Web Mod. - I can see the templates in Web, but nothing will load. When I select layout styles I either get a gray screen or a "gallery not found" message.
    Map Mod. - No map comes up. Sometimes the MetaData panel will load, but it's empty like it's not seeing the photos. Sometimes the whole panel is blank.
    (Side note: all of this works fine on my Laptop.)
    Help!!!

    Hi,
    Try repairing permissions.
    Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. As long as you see, "Permissions Repair Complete" when it's finished... you're done.
    If you see any warnings re: SUID messages, they can be safely ignored, information here: http://support.apple.com/kb/TS1448?viewlocale=en_US

    Restart your Mac. If that didn't help, go to Safari / Preferences - Autofill. Make sure *User names and passwords* is selected. Now open Keychain Access. (Applications/Utilities). Select Passwords on the left. Delete all keychains related to the sites you have problems logging in.
    Relaunch Safari and try those sites. You should be prompted to save the login data to a new keychain. If that didn't help, login to another user account. Launch Safari. If you see the same problems there, then log back into your admin account, launch Disk Utility. Select MacintosHD in the panel on the left then select the FirstAid tab.
    If Disk Utility reports, you will have to boot from your install disc to make repairs, instructions here.
    Using Disk Utility to verify or repair disks
    Carolyn
    Message was edited by: Carolyn Samit

  • Can't read or write some files, internet is failing, youtube won't load, software I tried to install was in Slovenian, not dutch or english like in my systempreferences settings, pictures and files won't preview with spacebar, etc. Malware?

    Specs:
    iMac 10.8.5
    3,4 GHz Intel Core i7
    32 GB 1600 MHz DDR3
    Can't read or write some files, internet is failing, youtube won't load, security software I tried to install was in Slovenian, not dutch or english like in my systempreferences settings, pictures and files won't preview with spacebar and are randomly corrupted, when I entered something in the Youtube searchbar (when it was still working) it send me to a site with sexadds.
    I tried restart my iMac and when I was logged back in, my dock preferences were reset.
    Also tried to download some security software to check my Mac for malware, but when I did, I tried several, I got a notification that said something like 'dumpfiles (don't know if this is the right translation...) damaged'.
    I'm taking screenshots from all the weird notifications I get and even three quarters off the screenshots I took in the last three hours are already unreadable.
    It started this morning when I tried opening a Premiere Pro file on which I worked the night before.
    When I tried opening it, it said the file was damaged and could not be openend.
    I tried opening it with AE or importing the file in a new project but nothing helped.
    When I tried looking for autosaves, this is the really weird part, there were none.
    Even though there are autosaves from my other projects, this one was completely gone.
    It looked like the day before never happened on my computer.
    Also when I openend Premiere all the recent projects had been wiped.
    So at first I thought it was a Premiere Pro failure.
    But than, later on the day, I tried loading some RAW files from my compact flash card.
    This is where I would get an error (error -36) which said some data cannot be read or written.
    I tried importing the files with a view different technics, from dragging to importing via Lightroom and I succeeded with Image Browser.
    But when I tried moving the files to an other folder the same error occurred.
    While dealing with this issue I wanted to put on some soothing music on youtube.
    This is when the next weird thing occurred: youtube wasn't completely loading in Chrome. I refreshed a view times, checked the internet connection and still no difference.
    When I tried in Safari it did work but when I clicked enter on the searchbar in Youtube, a page with sexadds appeared (I didn't install AdBlock in Safari...).
    I read about this 'phishing' where you are redirected to a site were a possible malware installment can take place...
    I don't know if it's connected to any of the problems I've been having but I just never experienced this on a mac, I have been a Mac user for 10 years now.
    On top of it all, internet started working worse and worse and now it's not even working at all. I had to fill in the password over and over, normally it remembers.
    Just like my system preferences, all the preferences I had with Chrome where also reset.
    Also somewhere in between I got this notification: Mac OS X must restore library to run programs. Type your password to allow.
    To me this is all very weird and suspicious. I have clearly no idea what's going on. Could this be another sort of trojan horse or malware?
    Some background info which could be helpful for solving this mystery:
    two months ago the one year old Fusion Drive in my iMac just broke out of nowhere.
    I got it replaced by a qualified apple repair store.
    When I got my computer back, all the files where gone.
    I got on the internet without AdBlock installed yet.
    A game or whatever it was, can't clearly remember, got installed by accident.
    I deleted it immediately.
    Only two weeks later, I couldn't log in to my account. It didn't recognize my password and username. 
    So I brought my mac back to the store.
    Here the repair guy said it was a minor thing and he just needed to reconnect my account. He also mentioned he found a downloaded game name Sparta and it probably had something to do with the error.
    I asked him; could it be a virus? He replied no way.
    I don't know why I couldn't be a virus, just because it's a mac doesn't mean it cannot be done.
    So today I tried installing anti virus software (such as avast- was in a weird language looked like slovenian, clamxav - was in slovenian) but I couldn't install them.
    PLEASE help me! I don't know what to do anymore, I work fulltime and I need my computer, I have no time to bring it in for repair, are there other perhaps easier ways?
    Could this be the work of a virus or a malware? Or is it a disk permissions issue?

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • Tried to install OSX Mavericks now MBP won't load

    Hi all
    Last night I tried to install OSX Mavericks on my MBP mid-2010 running Mountain Lion. It downloaded fine and then seemed to install fine. When the message came up saying it was going to restart automatically the spinning wheel hanged, which was the first problem. I switched off the MBP and turned it on again. It now refuses to boot up and stays on the Apple bootup screen with the spinning wheel.
    I've tried to restart in recovery mode but this doesn't seem to work. It just goes back to the spinning wheel and there is no progress bar that pops up to indicate the recovery data is being downloaded from the net (I don't have a recovery partition).
    I have a backup external hard drive that I can use to restore my MBP and then try upgrading again, but I can't use that until I get into recovery mode.
    Is anyone able to help?
    Thanks

    Ok so I worked out how to get into recovery mode. Turns out I was doing it wrong! I used an external USB drive to access recovery mode.
    I ran disk utility which identified and fixed some errors on the HD. I thought this might solve the problem but when I restarted the same problem occurred. I then restored my time machine backup which thankfully worked.
    I tried installing mavericks again! Upon restarting and completing the install, I got the message 'OSX has been installed. Your computer will now restart'. After the countdown had finished I got the beach ball which span eternally again, just like last time. After about 10 mins I did a hard reset and again OSX won't load.
    Lame...

  • My iPhone 5c won't send iMessages, snapchats, email from the Mail app, and it won't load YouTube. Other internet apps like Pandora and Instagram work fine though. Any suggestions on how I can fix this?

    A couple days ago I first noticed the problem when snapchats would appear on my lock screen but when I opened the app I kept getting the error message that the app was not able to refresh my story. Then the next day I was no longer able to send iMessages, they wouldn't go through and would only reach the second party when I sent them as text messages. Also, YouTube won't load and Mail won't send or receive email. I've already tried restarting my phone but there was no change. At first I thought my network connection was the problem but Instagram, Safari, Vine and Pandora all work perfectly. Any suggestions?

    Try this procedure to be sure of a proper restart.
    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)
    I would also try: Settings > General > Reset > Reset Network Settings

  • Can't log in - desktop won't load

    Hi, and thanks for reading this. I hope someone here can help me.
    I have a G4 flat-panel iMac, running 10.2.8. Bought brand new in 2002 and have had no problems, with the exception of the hard drive going out a few months later and replaced under warranty. (Apparently a few of the dual-boot machines had this problem.) They also upgraded the OS to 10.2.8 and the computer has run beautifully ever since. Until the other night.
    I was online and the modem disconnected but Internet Connect kept displaying "Disconnecting". This happens on occasion and the only way out of it is to shut down the computer and restart. So I did, and when the computer restarted I could not log in. The computer started as usual and seemed fine, the log-in screen appeared, I entered my password, the computer said "logging in", a blue screen appeared briefly... and then kicked back to the login screen. The desktop never appeared.
    After several tries of that, I decided to reset my password (with the system CD). It let me reset my password and the computer recognized the fact I had changed my password. (You know how the log-in screen "shakes" to signal a wrong password - that never happened.) I tried to log in again and it said "logging in"... and returned to the log-in screen. The same thing happened when I tried the root user account.
    I was able to start up from my Norton CD and changed the startup disk to 9.2. In 9.2, I can see the contents of my hard drive including my User folder in OS X and everything that had been on my desktop in OS X is right there in the "desktop" folder for my user name. I can move, copy, and delete things there. It's all there; the desktop just won't load when I start in OS X.
    I don't know if it helps, but in 9.2, the computer recognizes my ZIP drive, CDs, and my Wacom tablet and mouse.
    I have gone through the discussion boards and articles here and cannot find where anyone else has had the exact same problem. I have tried the possible solutions below, and none of them have changed anything:
    * Norton Utilities (Disk Doctor) - fixed some minor errors, then ran it again and no problems were found.
    * Safe Boot - I couldn't get the mouse to work, and when I figured out the keyboard "shortcuts" to log in, I got the same thing as before... "logging in" and then getting kicked back to the log-in screen.
    * Disk Utility (from the Mac OS X install CD) - it fixed a couple things then said that my hard drive appeared to be okay.
    * fsck (single-user mode) - it said that "Macintosh HD appears to be OK". So at least the hardware seems okay.
    * Rebuilding desktop - a long shot but I figured it was worth a try; nothing changed.
    * Reset privileges (single-user mode) - as far as I can see, nothing changed even after doing this.
    * Startup items (folder) - nothing seems out of place.
    * Disable log-in items - I still couldn't log in
    * In single-user mode: when trying one of the suggestions from an article here, I typed "cd/Users/{my user name}/Library, then mv Preferences Preferences_old, and received a message stating "no such file or directory."
    Looking through the contents of my hard drive, I can see that there is a Desktop icon for OS 9, but not anything for OS X. In theory, shouldn't there also be a desktop icon for OS X? Has my computer somehow lost its "connection" or "map" to my OS X desktop? I ran fsck again today so that I could look at logs/parse failed/plist/etc (an article I found here on apple.com) and following those steps, I noticed there was a line that said "root device is mounted read-only." So I can only assume that has to do with the fact my OS X desktop doesn't load.
    So, with all that being said (it's a lot, I know, and I hope it all makes sense) ... Is this problem something simple that I can fix myself, or do I need to take it into the shop and have a technician look at it? As you can imagine, this is all getting very frustrating, with limited access to an old version of Photoshop, SimpleText, and a very old web browser that only works on a few sites (and thankfully Apple.com is one of them). I miss my OS X.
    Thanks again for reading this, and for any advice/assistance you may be able to provide.

    Thanks, Anna. Excellent work. Everything seems fine, except, of course, the booting OS X part.
    First try Resetting the PRAM
    • Shut down the computer.
    • Locate the following keys: Command, Option, P, and R. You will need to hold these keys down simultaneously later.
    • Turn on the computer.
    • Press and hold the Command + Option + P + R keys immediately after the startup chime.
    • Hold keys down until you hear the startup chime for the third time.
    • Release the keys and immediately and allow computer to boot.
    The fact that you can boot in Safe Mode suggests that you may have a Login item that conflicts with the startup process. If resetting PRAM does not work try this:
    Boot computer in Safe Mode.
    If you are able to get into the Login items (Apple Menu > System Preferences > Accounts > Login Items) make a note of all the log in items (write it down). Then delete them all by selecting each one in turn and clicking the minus sign under the list. Shut down and try booting the computer normally. If you are able to boot successfully add the Login items on your list one by one and try rebooting each time you have added one. This should help you isolate the offending item.
    I hope one of these methods works. Post back and let me know.
    cornelius

  • I just updated my pages and now it won't load. This is on my iPad. The first version which has the latest version it can have 5.1 or something like that. I am trying to open a document and am worried that if I uninstall and reinstall I will lose all my do

    I just updated my pages and now it won't load. This is on my iPad. The first version which has the latest version it can have 5.1 or something like that. I am trying to open a document and am worried that if I uninstall and reinstall I will lose all my documents

    I just uninstalled it and am waiting for it to reinstall. I sincerely hope that I have not lost everything that I worked on so hard. Now that mobile me is gone, I have not been able to go between devices to transfer things. I was merely trying to take a document I had worked on and open it in pages, but it said my version was too old. When I updated, it wouldn't load. Now I cannot do anything. I hope that the reinstall fixes it without losing everything. Please advise!!! Yes, I am in panic mode.

  • I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect"

    I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect", which is Windows lingo for "missing package dependencies".  All the computers at my company with 2010 loaded seem to do OK.  When I do a Dependencies Walk I get missing Visual C debug dll's missing plus IEshims and wer which both have a whole tree of dependencies missing on my machine.  The Windows install is the same "Windows XP version 2002 Service Pack 3" on my PC and the working PC's. So I'm thinking I have to uninstall 2011 and go back to 2010.  Is this correct?  Those VC debug dll's were installed on the machines with 2010 in them but were not installed in mine.
    I've heard the advice to recompile the dll with debug turned off but I don't have access to the source code.
    Thanks in advance.

    u87 wrote:
    Thanks for the reply.  This at least tells me that going back to LV2010 is not likely to solve the problem.  The missing dll's are:
    MFC90D.dll
    MSVCR90D.dll
    IESHMS.dll
    WER.dll
    And, once again, IESHMS and WER have other dependencies.  So perhaps i need to install the Visual C++ development environment.
    IESHIMS.dll is an Internet Explorer DLL that gets usually delay loaded by shdocvw.dll. As delay load it can not cause DLL load errors but only runtime errors. Maybe your DLL has it as direct dependency but that is unlikely since it does not have a documented interface.
    WER.dll is Windows error reporting for Vista/Win7.
    MFC90D.dll is the Microsoft Foundation classes and MSVCR90D.dll is the MS C runtime library, both as debug variant.
    So all the DLLs you mention are actually MS DLLs! You haven't identified the DLL that you try to access in LabVIEW that causes these error messages. IESHIMS and WER are usually delay loaded by any component that needs it and should not likely be used by non MS code.
    What is the DLL you try to load into LabVIEW and by whom? Get the provider of that DLL to provide you a non Debug build of the DLL. Installing Visual C on all the machines just to make the DLL load is not a solution, besides that it is likely not legal since I doubt you have that many licenses.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • My weather app won't load

    My weather app won't load, I type in my zip code and it says it cannot be found and says unable to load.. How do I make it load?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to settings>iTunes and App stores and sign out and sign back in
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • Help my iPod won't let me download apps... I'll put my password in then it takes me to the app but then is just goes away then I do it again an it won't load or it will just go away again plz help I want to get apps

    Help my iPod won't let me download apps... I'll put my password in then it takes me to the app but then is just goes away then I do it again an it won't load or it will just go away again plz help I want to get apps

    You said you updated yur 1G iPod to 4.2.1. A 1G can only go to 3.1.3 and thus you must have jailbroken it to get to 4.2.1 and that can cause problems.
    ArealDJ wrote:
    I have the same problem.. apps won't download and won't open. I have a 1st Gen ipod touch and recently upgraded my MacBook Pro (2012) and as soon as I upgraded the iPod Touch to 4.2.1, this happened. I restored to factory defaults and still cannot dl and open apps. Any way to diagnose this problem? Apple tech charges $29.99 for out of warranty products and if I am reluctant to pay with them telling me its simply a hardware problem.

  • My iPhone 4S will not connect to the internet properly. It says that it is connected, the App Store won't load apps and I can't get on my face book app. I have tried wifi and my cellular data, neither work. What are some ways to fix this?

    My iPhone will
    not connect to the internet properly. It says that it is connected, the App Store won't load apps and I can't get on my face book app. I have tried wifi and my cellular data, neither work. What are some ways to fix this?

    Try resetting your network settings.
    Settings>Genenal>Reset>Reset Network Settings.

  • Websites won't load properly

    Hi
    After just fixing my wifi problem (http://discussions.apple.com/thread.jspa?threadID=1345209) I am able to access the internet but I have a problems loading pages from some websites. The browser will say that I have loaded the page fully, but none of the flash, javascript, or backgrounds will load. Some pictures, but not most of them would load. The page is a white background with text and links and a couple small pictures. The text is a default font and only the links are a color other than black. Most sites will work, but a few big one's won't.
    Some sites that won't work:
    youtube.com (This wasn't working and then it worked for about three days and now it's not working again. It worked on all of the other computers in the house, mac or windows.)
    facebook.com (This won't load on any of the mac computers in the house, but will work on our windows laptop.)
    flickr.com
    Sites that do work:
    Google.com
    apple.com
    pretty much anything else.
    This problem persists on both Firefox and Safari. I have tried restarting the computer, deleting the preference (.plist) files for both browsers, checking my firewall settings, and nothing has worked.
    Does someone know what is wrong?
    Cameron

    I still haven't resolved this problem. Here is some more information...
    youtube is the only website that has started working, but it sometimes stops working again.
    There are many other sites that don't work, cnn.com, washingtonpost.com (sometimes), and a lot of others.
    I have contacted our internet service provider and they said that they had nothing to do with the problem.
    Some websites will not work at all. Safari tells me that it can't find the server. Some that do this are ups.com, computerworld.com, and others.
    I think that the problem is that, for some reason, our mac computers can't access certain servers where we are. (We are at a small ski resort (on the mountain) in Canada.) I think this because when a site doesn't load properly there are several errors and they are all "can't find host" errors from a couple of the same sites (ex. example.something.something).
    *Also, I ran a test on speedtest.net on the laptop and one of our iMacs and the results were way faster than anything actually loads/downloads or than the activity monitor shows, even when checking the activity monitor at the same time as running the test.

  • E3000 Won't load any site.

    I forgot my E3000 router password so I restarted to factory settings.
    I tried to set up using the software that I downloaded for the site and It didn't work, It gave me some errors that I was able to fix later running the software from a windows XP sp3 pc (Lucky I had one of those). Anyhow, even though the software "was able to set the router" I still couldn't connect to the internet, I tried to solve this problem browsing the forums and it kept saying I I was connected to the router but the router wasn't connected to internet. 
    So after all, browsing and stuff I tried to restart to factory setting a couple of times reboot it and reboot my pc, currently I found out This Link (Since i don't need a login for my ISP) I realized one of the problems was my Local IP address was 192.168.1.1 so I changed to 192.168.2.1 and surprisely it showed me connected to the internet after that.
    But still, I can't load any site using the router, It's like I still wasn't connected to the internet, I check "Status" and I get a IP address and everything, I have tried Release and then Renew to get a new one and it still won't load any site, I'm tired of looking around, really mad about this problem. 
    Any solutions?
    PS: If you got no idea you get me a very detailed guide of how to set up my router (I think I did all right though) but I got no problem resetting it again and start over as long as it fixes this problem.

    Hi deimerx, first of all, how was the reset done? Did you do it by pressing the reset button down for 30 seconds while the device was on? Let me share the steps to the the proper reset :
    1. Press and hold the reset button for 30 seconds while the device is on.
    2. Release the button and unplug or power off the device.
    Once done, reinstall the settings.
    For Cable connection, check this link, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=500669ae82c14eeab88dc77a69b96af3_4865.xml&pid=80&r...
    For DSL connection, please refer to this link,  http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=9017a6f6bece444dbb4a0746eb87682a_2210.xml&pid=80&r...
    Hope that helps.

Maybe you are looking for

  • Delete records from tableA which are not in tableB

    Table A contains milions of records which is the best way to delete records from tableA which are not in tableB delete from tableA where empno not in (select empno from tableb) or delete from tableA where empno not exists (select empno from tableb wh

  • How to connect two pcs SQLPLUS

    I m on pc ip=11 and want to connect to the listener of pc ip 12...how do i do it? c:\sqlplus sys as sysdba/oracle@????????????????

  • All installed Labview versions crash since installing 8.2

    So, on my development machine I had LV7.0, 7.1, 8.0, and 8.6.  (Along with various version of teststand, toolkits, daqmx, ni-daq, etc ...)  Then came the day, not long ago (say two hours ago) that I needed Labview 8.2. So, I install it.  It finishes

  • Is Adobe Air SDK needed GPU information, when the game want to load the ATF file ?

    Hi, Adobe members. this is jonghwan lee. Actually I found texture load issue on a game(names samkukjangtu on korean) which is using Adobe gaming sdk. the game uses the ATF file for the textures on the game(actually it's related in Air SDK, I think).

  • How do I edit 1080/50p from my TM700

    I have a Panasonic TM700 and am not sure if Premiere Pro CS5 can edit my footage and if it can, what preset should I use. (my computer handles the raw footage perfectly, I just don't know how to edit it)